Error while using Javamail...pls help me...

when i am using javamail for sending mail , i am getting error like,
C:\jdk1.3\bin\mail>java MailSend
[email protected] [email protected]
javax.mail.SendFailedException: Sending failed;
nested exception is:
javax.mail.MessagingException:
at javax.mail.Transport.send0(Transport.java:218)
at javax.mail.Transport.send(Transport.java:80)
at MailSend.Send(MailSend.java:56)
at MailSend.main(MailSend.java:73)
and i define properties like,
mailProp.put("java", "java");
where , "java" is my system name, and there is also mail server on my system. and my system is connected with proxy server..
when i am trying
mailProp.put("mail.smtp.host", "java");
then i am getting same type of error...
so, what is that ? pls help me to solve my error...

Surely there's more information associated with that MessaginException than
you've included here.
Turn on session debugging and run your program again.
http://java.sun.com/products/javamail/FAQ.html#debug

Similar Messages

  • Error while using utl_smtp,pls help

    CREATE OR REPLACE PROCEDURE send_mail (p_sender IN VARCHAR2,
    p_recipient IN VARCHAR2,
    p_message IN VARCHAR2)
    as
    l_mailhost VARCHAR2(255) := '10.16.56.30';
    l_mail_conn utl_smtp.connection;
    BEGIN
    l_mail_conn := utl_smtp.open_connection(l_mailhost, 25);
    utl_smtp.helo(l_mail_conn, l_mailhost);
    utl_smtp.mail(l_mail_conn, p_sender);
    utl_smtp.rcpt(l_mail_conn, p_recipient);
    utl_smtp.open_data(l_mail_conn );
    utl_smtp.write_data(l_mail_conn, p_message);
    utl_smtp.close_data(l_mail_conn );
    utl_smtp.quit(l_mail_conn);
    end;
    i create dthe above and when i am running it i am getting the following error
    SQL> execute send_mail('[email protected]','[email protected]','hi');
    BEGIN send_mail('[email protected]','[email protected]','hi'); END;
    ERROR at line 1:
    ORA-29278: SMTP transient error: 450 4.7.1 [email protected]..
    Relaying temporarily denied. Cannot resolve PTR record for 10.16.56.20
    ORA-06512: at "SYS.UTL_SMTP", line 17
    ORA-06512: at "SYS.UTL_SMTP", line 96
    ORA-06512: at "SYS.UTL_SMTP", line 240
    ORA-06512: at "TTK05.SEND_MAIL", line 11
    ORA-06512: at line 1
    pls help me , i need to send a mail from the above
    reg

    Hi,
    try to use the host-name instead of the IP and check your dns configuration (Cannot resolve PTR record for 10.16.56.20).
    (Relaying temporarily denied) -> Some mail-servers are configured to accept only messages for their domain, e.g. mailserver mail.dummy.com only accepts messages to account with name like [email protected]

  • Not getting PO printed while using bursting pls help

    Hi All,
    Working on converting PO report to XML. While using bursting to print the pdf file the document is not sent to the printer..
    But in the output file of the "XML Publisher Report Bursting Program" getting success.
    Not sure why report output is not sent to the printer.
    Pls help......
    Thanks
    Rajesh
    Edited by: Badsha on Jun 17, 2010 2:19 AM

    Hi...Please check the Burst Control file with the printer & IP details.
    Look for the file below.
    <?xml version="1.0" encoding="UTF-8"?>
    <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
    <xapi:globalData location="stream">
    </xapi:globalData >
    <xapi:request select="/DATA/LIST_DEPT/DEPT/LIST_EMPLOYEE/EMPLOYEE">
    <xapi:delivery>
    <xapi:email server="${EMAIL_SERVER}" port="${EMAIL_PORT}"
    from="${FROM_EMAIL_ADDRESS}"
    reply-to ="${REPL_TO_ADDRESS}">
    <xapi:message id="email1" to="${TO_EMAIL_ADDRESS}" cc="${CC_EMAIL_ADDRESS}"
    attachment="true" content-type="html/text"
    subject="Employee Report for Empno ${EMPNO}">
    Dear ${ENAME}, Please review the attached document.</xapi:message>
    </xapi:email>
    <xapi:filesystem id="file1"
    output="C:\burst\sample\${EMPNO}_${ENAME}_${MGR}_PRINT.pdf"/>
    <xapi:print id="print1" printer="${PRINT_URL}" copies="2"
    orientation-requested="3" />
    </xapi:delivery>
    <xapi:document key="${EMPNO}"
    output-type="pdf" delivery="email1">
    <xapi:template type="rtf" location="${TEMPLATE_LOC}"
    filter=".//EMPLOYEE[DEL_CHANNEL='EMAIL']" >
    </xapi:template>
    </xapi:document>
    <xapi:document key="${EMPNO}" output-type="pdf" delivery="print1">
    <xapi:template type="rtf" location="${TEMPLATE_LOC}"
    filter=".//EMPLOYEE[DEL_CHANNEL='PRINT']" >
    </xapi:template>
    </xapi:document>
    <xapi:document key="${EMPNO}" output-type="pdf" delivery="file1">
    <xapi:template type="rtf" location="${TEMPLATE_LOC}"
    filter=".//EMPLOYEE[DEL_CHANNEL='FILE_SYSTEM']" >
    </xapi:template>
    </xapi:document>
    </xapi:request>
    </xapi:requestset>
    check the printers setting as required....aslo check what printer you are using for pdf printing...Pasta Printing??
    Thanks
    Ratnesh

  • Error while creating KMScheduler:Pls help

    Error while creating KMScheduler:
    Kind     Status     Priority     Description     Resource     In Folder     Location
    Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.crt_api.jar'.     EPD_APMDM_Dkmsted.com          Build path
    Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.crt_api.jar'.     TestSchedule          Build path
    Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.common_api.jar'.     EPD_APMDM_Dkmsted.com          Build path
    Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.common_api.jar'.     TestSchedule          Build path
    Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.framework_api.jar'.     EPD_APMDM_Dkmsted.com          Build path
    Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.framework_api.jar'.     TestSchedule          Build path
    Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.appproperties_api.jar'.     EPD_APMDM_Dkmsted.com          Build path
    Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.appproperties_api.jar'.     TestSchedule          Build path
    Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.mime_api.jar'.     EPD_APMDM_Dkmsted.com          Build path
    Error               Missing required library: 'C:Program Files/SAP/IDE/IDE70/eclipse/plugins/com.sap.km.rfwizard/lib/bc.rf.global.service.mime_api.jar'.     TestSchedule          Build path

    Hi
    Initial excepiton suggest that missing "bc.sf.framework_api.jar " jar file.
    check this  out might hlep u
    https://forums.sdn.sap.com/message.jspa?messageID=7717494
    https://forums.sdn.sap.com/message.jspa?messageID=2338288
    https://forums.sdn.sap.com/message.jspa?messageID=5676237
    Thanks

  • Compilation Error while using string (Please help)

    Hi,
    I am using "Sun WorkShop Compiler C++ SPARC Version 5.000". Compiling code which contains a "string variable" throws the following error:
    "/opt/WS5/SC5.0/include/CC/./new", line 32: Error: The prior declaration for ope
    rator new(unsigned) has no exception specification.
    "/opt/WS5/SC5.0/include/CC/./new", line 34: Error: The prior declaration for ope
    rator delete(void*) has no exception specification.
    "/opt/WS5/SC5.0/include/CC/./new", line 36: Error: The prior declaration for ope
    rator new[](unsigned) has no exception specification.
    "/opt/WS5/SC5.0/include/CC/./new", line 38: Error: The prior declaration for ope
    rator delete[](void*) has no exception specification.
    4 Error(s) detected.
    The command used for compilation is :
    /opt/WS5/bin/CC -compat=4 -I/opt/WS5/SC5.0/include/CC -features=%all try.cpp
    Would help if I could get some comments on the above.
    Thanks and Regards,
    M Shetty

    There is a requirement that I use the Workshop 5.0
    compilere with option "-compat=4".
    The program I am trying to compile contains:
    #include <string>
    int main()
    string test = "aaa";
    return 0;
    There is no "string" in "-compat=4". You need to
    do something like this:
    // --- start test.cc ---
    #include <rw/cstring.h>
    int main()
    RWCString test = "aaa";
    return 0;
    // --- end test.cc ---
    CC -compat=4 -library=rwtools7 test.cc

  • Error while binding.. pls help

    input = new Countrylist_Input();
        wdContext.Countrylist_Input().bind(input) ;
    When i use the above code a red line appearing under bind and it says the following error.
    The method bind(IPublic<customcontroller>.countrylist_InputElement) in the type IPublic(customcontroller>.Countrylist_InputNode is not applicable for the arguments (Countrylist_Input)     <custom controller >.java

    Pankaj,
    Did you declare input as Countrylist_input type.
    use,
    Countrylist_input input = new Countrylist_Input();
    wdContext.nodeCountrylist_Input().bind(input);
    Thanks,
    Raj

  • HT3275 My time machine does not back up and giving me this error message: The backup disk image "/Volumes/Data-1/Amiel's MacBook Pro.sparsebundle" is already in use. Pls help.

    My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.

    Make sure that there are no other Macs backing up at the present time.
    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back in
    This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category.

  • Error while using P2V in Oracle VM 2.2 version

    Error while using P2V in Oracle VM 2.2 version
    I tried using this option by using the steps given on one link but it didnt worked...
    Error:
    code 404, message No permission to list directory.
    I ve tried giving full permissions on for /OVS on Server but invain.
    Can U pls help me...
    Thanks in advance.
    Edited by: user10310678 on Sep 16, 2009 3:32 AM

    user10310678 wrote:
    I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

  • Error while using UTL_FILE package

    I am getting error while using UTL_FILE package in apex 3.0 version
    Pls help me out.

    ok, how are you using UTL_FILE and what is the error?

  • Error while using UTL_FILE

    I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
    from system account. I am using Windows XP with NTFS.
    SQL> create or replace directory FILE_DIR as 'C:\'
    2 /
    Directory created.
    SQL> grant read on directory FILE_DIR to public;
    Grant succeeded.
    1 create or replace PROCEDURE file_upload IS
    2 v_file_name VARCHAR2(200);
    3 v_file_type UTL_FILE.FILE_TYPE;
    4 v_line VARCHAR2(1000);
    5 BEGIN
    6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
    7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
    8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
    9 UTL_FILE.FCLOSE(v_file_type);
    10 DBMS_OUTPUT.PUT_LINE(V_LINE);
    11* END;
    SQL> exec file_upload;
    BEGIN file_upload; END;
    ERROR at line 1:
    ORA-29283: invalid file operation
    ORA-06512: at "SYS.UTL_FILE", line 475
    ORA-29283: invalid file operation
    ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
    ORA-06512: at line 1
    I appreciate if someone can help me in this regard.
    Thanks in Advance.
    Regards
    Muhammad ALi

    Hello,
    What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
    To read from a directory_ . This will read an existing file 'customer.txt" from the directory
    {code}
    CREATE OR REPLACE PROCEDURE .file_upload
    IS
    v_file_name VARCHAR2 (200);
    v_file_type UTL_FILE.file_type;
    v_line VARCHAR2 (1000);
    BEGIN
    v_file_name := 'customers.txt';
    v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
    UTL_FILE.get_line (v_file_type, v_line); -- Error was here
    DBMS_OUTPUT.put_line (v_line);
    UTL_FILE.fclose (v_file_type);
    END;
    {code}
    _*To open a file*_ This will create customer_XXXXX file under the directory
    {code}
    CREATE OR REPLACE PROCEDURE testme.file_upload
    IS
    v_file_name VARCHAR2 (200);
    v_file_type UTL_FILE.file_type;
    v_line VARCHAR2 (1000);
    BEGIN
    v_file_name := 'customers_'
    || TO_CHAR (SYSDATE, 'dd')
    || TO_CHAR (SYSDATE, 'MON')
    || TO_CHAR (SYSDATE, 'YYYY')
    || '.txt';
    v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
    UTL_FILE.put_line (v_file_type, v_line);
    DBMS_OUTPUT.put_line (v_line);
    UTL_FILE.fclose (v_file_type);
    END;
    {code}
    Regards
    Edited by: OrionNet on Jan 29, 2009 12:30 AM

  • Error while using DB Adapter in BPEL process

    Hi All,
    I am getting error while using DB Adapter in BPEL process
    java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
    I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
    I am not able to solve this.
    Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

    did u deploy your dbadapter through console to the plan mentioned for deployment?

  • HT5642 Unable to download app this time error while downloading app please help!!!

    when i download some app from apps store i get the following error
    "Unable to download app this time error while downloading app" please help!!!
    i ve tried these Things but
    didnt workout yet
    1) i tried hard reset
    2)i tried logout/login Itune & appstore
    3)Connected to pc and rest setting Network and Full Rest
    all of no use... i dont want to update my softwre from IOS 6.0
    Plx help!1

    Hey Prahaladvatsan,
    Thanks for the question. If I understand correctly, there is a blank app icon on the home screen. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • Error while using the export utility

    Dear all of
    I am getting the following error while using the export utility in the Oracle database 9i
    I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
    FOLLOWING ARE THE ERROR ----------------------------
    EXP-00008: ORACLE error 942 encountered
    ORA-00942: table or view does not exist
    EXP-00024: Export views not installed, please notify your DBA
    EXP-00000: Export terminated unsuccessfully
    -----------------------------------------------------------------------------------------------------------------------------------

    Can you go to this discussion please.
    Re: Getting a strange error for Exp
    -aijaz

  • Error while using window.open() in JSP page

    I am getting error while using window.open() in my JSP page.
    This is code in my JSP page,
    <h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
    function loadContextSensitiveHelp(helpPageName) {
    top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
    'width=350,height=250'
    +',menubar=0'
    +',toolbar=0'
    +',status=0'
    +',scrollbars=1'
    +',resizable=0')
    top.consoleRef.document.close()
    I am getting the following error in my browser,
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
         org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
         org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
         org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
         org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
         org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
         org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
         org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
         org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
         org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
         org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
         com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
    note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
    Anyone help me to solve this issue. Thanks............................

    I am getting error while using window.open() in my JSP page.
    This is code in my JSP page,
    <h:commandLink onclick="loadContextSensitiveHelp(#{setNewDayStatusBean. cycleStatusViewObject.helpUrl});" value="Help">
    function loadContextSensitiveHelp(helpPageName) {
    top.consoleRef=window.open('#{facesContext.externalContext.requestContextPath}/main/patient/helpPageName','myconsole',
    'width=350,height=250'
    +',menubar=0'
    +',toolbar=0'
    +',status=0'
    +',scrollbars=1'
    +',resizable=0')
    top.consoleRef.document.close()
    I am getting the following error in my browser,
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: /SetNewDayStatus.jsp(69,34) #{..} is not allowed in template text
         org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
         org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
         org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:102)
         org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:711)
         org.apache.jasper.compiler.Node$ELExpression.accept(Node.java:935)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
         org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:838)
         org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1507)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2386)
         org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2392)
         org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2336)
         org.apache.jasper.compiler.Validator.validate(Validator.java:1737)
         org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:428)
         com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:444)
         com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:116)
         com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:106)
         com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
         com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
         javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
    note The full stack trace of the root cause is available in the Apache Tomcat/6.0.13 logs.
    Anyone help me to solve this issue. Thanks............................

  • Error while using pt:standard.choose tag

    Hi,
    I am getting error while using the ALUI 6.5 Adaptive tags. The details are given below. Can anyone help?
    The code I am using is
    <pt:standard.choose>
                   <pt:standard.when pt:test="stringToACLGroup('user=13009;').isMember($currentUser)">
                        <div class="ali-portlet-controlone">Adit</div>
                        <pt:logic.value pt:value="$currentUser"/>
                        <pt:logic.value pt:value="checking Tags"/>
                   </pt:standard.when>
              </pt:standard.choose>
    Also I checked for the variable $currentUser and it was displaying null so I set the variable as
    <pt:logic.variable pt:key="currentUser" pt:value="13009"/>
    I aslo checked by giving the group id in stringToACLGroup('group=301;') but same result.
    The stack trace is ::
    <!--Error displaying tag when in library standard. String index out of range: -19: com.plumtree.openfoundation.util.XPIndexOutOfBoundsException: String index out of range: -19
         at com.plumtree.openfoundation.util.XPException.GetInstance(XPException.java:403)
         at com.plumtree.openfoundation.util.XPException.GetInstance(XPException.java:350)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:165)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.standard.ChooseTag.DisplayTag(ChooseTag.java:110)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfFalseTag.DisplayTag(IfFalseTag.java:75)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfTag.DisplayTag(IfTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.ForEachTag.DisplayTag(ForEachTag.java:162)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.portletpage.PortletRegionDisplayTag.DisplayTag(PortletRegionDisplayTag.java:91)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:243)
         at com.plumtree.portalpages.browsing.myportal.MyPortalDP.PageDisplay(MyPortalDP.java:166)
         at com.bea.alui.taglib.basepage.ContentTag.DisplayTag(ContentTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.basepage.PageBodyTag.DisplayTag(PageBodyTag.java:135)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessMainPageLayout(LayoutDisplay.java:44)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:240)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:219)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:151)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Interpreter.java:2140)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(Interpreter.java:657)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(Interpreter.java:190)
         at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:300)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3495)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173
    Caused by: java.lang.StringIndexOutOfBoundsException: String index out of range: -19
         at java.lang.String.substring(String.java:1938)
         at com.plumtree.taglib.standard.WhenTag.DisplayTag(WhenTag.java:72)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.standard.ChooseTag.DisplayTag(ChooseTag.java:110)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfFalseTag.DisplayTag(IfFalseTag.java:75)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfTag.DisplayTag(IfTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.ForEachTag.DisplayTag(ForEachTag.java:162)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.portletpage.PortletRegionDisplayTag.DisplayTag(PortletRegionDisplayTag.java:91)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:243)
         at com.plumtree.portalpages.browsing.myportal.MyPortalDP.PageDisplay(MyPortalDP.java:166)
         at com.bea.alui.taglib.basepage.ContentTag.DisplayTag(ContentTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.basepage.PageBodyTag.DisplayTag(PageBodyTag.java:135)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessMainPageLayout(LayoutDisplay.java:44)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:240)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:219)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:151)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Interpreter.java:2140)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(Interpreter.java:657)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(Interpreter.java:190)
         at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:300)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3495)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Edited by: user590322 on Oct 29, 2009 12:22 AM

    Proper usage:
    <pt:standard.choose>
    <pt:when pt:test="stringToACLGroup('user=1;').isMember($currentuser)">
    ... secret administrator content ...
    </pt:when>
    </pt:standard.choose>
    Note that it's pt:when and not pt:standard.when. Also, Joel is right -- I think $currentuser is case sensitive.
    Chris Bucchere
    http://bucchere.com
    http://twitter.com/bucchere

Maybe you are looking for

  • Dazzle

    I intend to transfer my Super VHS tapes from an old camera to DVD and have aquired a Dazzle Platinum. But everything is for Windows! Does anyone know if it can be used on a Mac and if so how do I go about doing it? I have checked Pinnacle's site but

  • Problem with Jquery Mobile Swatches

    Hello, Im trying to use Dreamweaver cs6 with Jquery Mobile but I'm receiving this error. File not found Dreamweaver could not file the file "Applications:Adobe Dreamweaver CS6: Configuration:JquerySwatch: JquerySwatchTemp.html" to load. Anybody can h

  • Choppy playback in Premiere CC2014

    After upgrading from CC to CC2014 playback is very choppy and inaccurate. Same project worked great in CC. Also cannot get Directlink to AE to work ( greyed out). Would I need to upgrade my current AE CC to the newer version 2014? 2008 MACPRO, ATI ra

  • Want to upgrade to iPhone6 but my contract does not end for a year

    Are there any deals for people in my situation?

  • IPhot erkennt DVD mit iPhoto libary nicht

    Habe eine iPhoto Libary auf DVD gebrannt. Wenn ich diese DVD nun einlege, kann ich sie zwar im Finder sehen, nicht aber in der "Quelle"-Box in iPhoto. Laut "iPhoto Hilfe" sollte diese hier jedoch ersichtlich und auswählbar sein. Kann mir da bitte jem