Error while validating a BPF
Hi Everyone,
I am trying to create BPF as per the How to Guide given on SDN. While I am validating the BPF, it gives me below error -
BPF: Error reading master data
Invalid attribute name (P_Owner) in dimension (P_ACCT)
When I check for the dimension property of P_ACCT, I have added P_Owner there and have added master data as well for the records.
Please help me in resolving this issue. Needless to say that I am new to BPC and just starting.
Thanks in Advance.
Hi,
How you are maintaining master data in owner, is should be maintained as follows
If single user it should be domain\user u2018s
User should be valid user, who is existing in BPC.
If you are using group of user then create team and give team name as follows
[Team Name]
i.e Open brace team name close brace
Hope this will help you u2026
Thanks,
Devi
Similar Messages
-
Error while validating Business Rule (Error Cause: nativeGetNewTLA Rule)
Hi, I am receiving an error while validating business rules
An error occurred in: Rule:HypLive.Plan1.Product Interest
A validation error was received from the Planning server 'http://abc:8300/HyperionPlanning/servlet/HspAppManagerServlet?appname=HypLive'.
'Error:
Error Cause: nativeGetNewTLA Rule HypLive.Plan1.Product Interest'.Are you able to validate the rule in EAS (or Calc Manager)?
Normally nativeGetNewTLA Rule is followed by out of memory errors like java.lang.OutOfMemoryError,
Increase the heap size to 1024, re start Planning and try validating it again.
Cheers..!! -
Error while validating Dimension
Hi,
I am getting the following error, while validating the Dimension (DIM_COUNTRY).
' VLD-0350: In a hierarchy STANDARD, level relationship binding between parent level REGION and child level COUNTRY does not exist.'
How to rectify this error? Please help.
Regards,
SandeepYou could:
1) Try doing an autobind of dimension, however this may create a duplicate sequence and table.
or
1) Unbind dimension.
2) Delete from repository the sequence that was created previously.
3) Delete from repository the table that was created previously.
4) Autobind dimension.
Note when using autobind you'll lose any partitioning etc. defined on the table.
Cheers
Si
Edited by: ScoobySi on Jan 27, 2010 1:20 PM -
Error while validating 0Analysis_Pattern or opening in WAD
Hi All
I am getting an error while validating the template 0Analysis_pattern, the error says "Cannot Instantiate data provider" Message No. RSWADPREXEC023. It is coming as an error message and not a warning.
Can somebody help me out !
Thankscheck oss 917950, and the connections are OK from BI to Portal
https://forums.sdn.sap.com/click.jspa?searchID=13154814&messageID=4046018
Hope it Helps
Chetan
@CP.. -
Error while Validating the condition in Joiner
Hi,
Im using a Joiner transformation and entered the condition. While validating it displays an OWB error.
OWB ERROR - The object references has been invalidated due to switching of projects
Can you pls suggest how to resolve this.
Thanks in Advance
Regards
KishanThanks for the prompt help. Is there any other way instead of removing the DTD line ?. Because the xml is coming as a string and removing the dtd and then adding it will unneccesary hamper performance. Do you any other way in which even though I don't remove the line I get the output without removing the dtd line ?.
thanks and regards,
Sachin -
Error while validating Calculated Column
Hi Frzz,
I have created a Calculated column of type NVARCHAR by performing some calculation on a filed whose data type is NVARCHAR.
But while validating the view am getting an error " Attribute type is not valid"
Could some one please help me why am getting this error.
Error Details:
Short Text
Attribute type is not valid
Cause
Mismatch between data type defined and values computed.
Recommendations
Check calculated measure/attribute definition and ensure data types match.
Best Regards,
Krishna.Hi Raj,
I have provided the same size in Calculated column.But still am getting the same error.
1) First i created a calculated column CC_Test1 to perform the TRIM()
2) I created another calculted column CC_test2 on 1st calculated column (CC_Test1)
Table field:
Calculated Column1:
Calculated Column2:
Errror: -
hi,
after compile my java files on command like
then i opend weblogic builder.
1.i connected to server.
2.file open then descriptors sucessfuly created.
3.but while validating and deployement through weblogic builder i am getting error look like this"ERROR: Error compiling EJB sources
ERROR: Error from ejbc: Compiler failed executable.exec"
can any one help how to solve this problem
pullareddyMake sure you have javac in your PATH.
-- Rob
pullareddy wrote:
hi,
after compile my java files on command like
then i opend weblogic builder.
1.i connected to server.
2.file open then descriptors sucessfuly created.
3.but while validating and deployement through weblogic builder i am getting error look like this"ERROR: Error compiling EJB sources
ERROR: Error from ejbc: Compiler failed executable.exec"
can any one help how to solve this problem
pullareddy -
Errors while validating after import
Hi
In FDQM, i have give the source and targets for mapping of a custom dimension.
One of the source is getting calculated using FDM scripts as based on the data, it generates the metadata member at source.
I can see a proper import happening and the script generating the required result.
But while validating it shows an error. Even though the member is present in MAPS, it shows it as unmapped.
If i use the "FIX" option in validation, i still end up getting the same error message (in addition the dimension member field now shows some additional characters!)
Any one has faced this issue with FDM before?
RegardSHi,
It seems you are using Logic Accounts to create the new metadata member. Should this be the case, then it may be worth checking whether you are mapping the name of the logic account itslef or the newly created members.
Regards,
Vlado -
Error while validating/activating views in SAP HANA
Hi,
I are getting below error while activating/activating view in HANA
"exception 40109:nrepository/base/activation/activator.cpp:176nRepository: Encountered an internal error in the repository code, this is most likely a bug in the implementation;Activator failed to retrieve/lock NRIV entry for domain activation_idnexception 71000139:nptime/query/plan_executor/trex_wrapper/trex_wrapper_body/trex_update.cc:2123n[2458] current operation cancelled by request and transaction rolled backn "
Please suggest why this error is coming & how can we rectify it.
Regards
Divyank MehtaHi Krishna,
I am getting same error while activating the View.HANA Studio version is 85.
Thanks -
Error while validating data template
hi ,
I get the following error while i validate the data template
failed to save data
error occured while crating xml data
nls_error_illegal_value
NaN
Nan
the following is the data template
<dataTemplate name="dataTemplateName" description="Template description"
dataSourceRef="val_ds" defaultPackage="employee" version="1.0">
<parameters>
<parameter name="department" dataType="character" defaultValue="10"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1"
select EMPNO,ENAME,JOB from emp WHERE DEPTNO=:department
</sqlStatement>
<dataQuery>
<dataTrigger name="beforeReport" source="employee.beforeReportTrigger"/>
<datastructure>
<group name="G_EMPLOYEE" source="Q1">
<element name="EMPLOYEE_NUMBER" value="EMPNO"/>
<element name="NAME" value="ENAME"/>
<element name="SALARY" value="SAL"/>
</group>
</dataStructure>
</dataTemplate>
can someone checkfor me
ta
sHi,
Try removing the defaultPackage="employee" from the dataTemplate element. I also noticed that there are the following errors in your XML template:
<sqlStatement name="Q1" is missing the closing ">"
There are two <dataQuery> tags - the 2nd one should obviously be </dataQuery>
You are selecting EMPNO,ENAME,JOB but reference EMPNO,ENAME and JOB in your GROUP
Cheers
Andy -
Getting an error while validating with the help of domain
This is strange. I am validating an email address column in employees table by creating a domain and then associating it with the email column in the table. This is the code
protected void validate() {
// ### Implement custom domain validation logic here. ###
int atpos = mData.indexOf('@');
int dotpos = mData.lastIndexOf('.');
if (atpos > -1 || dotpos > -1) {
throw new DataCreationException(null, "Invalid Email Address", null);
}But while committing records, I am receiving the following error:
Cannot convert testmailid of type class java.lang.String to class model.common.DomainEmail
Can anyone help me?
Oh yes, I am using JDev 11.1.2.3I suspect that you are using an <af:inputText> with no converter for entering the email on the page. The purpose of a converter would be to convert the String value entered by the user in the field to another datatype (e.g. to model.common.DomainEmail type) which is expected by the model layer (e.g. by the target VO attribute). If there is no such converter, JSF does not perform any datatype conversion and it tries to assign the java.lang.String value to the VO attribute (which is of model.common.DomainEmail datatype), so a type casting error occurs. If that is the case, then you should implement and attach a proper JSF converter to the <af:inputText> component.
Dimitar -
Error While validating OAGIS Document
Hi All,
My requirement is that i need to send a OAGIS 9.0 file from the Host Trading partner to the Remote trading partner.
So, i have defined the OAGIS document in the Custom Document protocol over Generic Busines Protocol.I does not get any error when i turn the validation off and the file is generated. But, when i turn the validation on i get an error as follows
Error Code-AIP-51505
Error Text- General Validation Error
Error Description :
Machine Info: (mdpemer143119)
Description: An unexpected error occurred during validation
StackTrace:
Error -: AIP-51505: General Validation Error: oracle.xml.parser.schema.XSDException: Start of root element expected.
at oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin.processXMLDocument(CustomDocumentPlugin.java:815)
at oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin.processOutgoingDocument(CustomDocumentPlugin.java:539)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1541)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:900)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1082)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:126)
at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:797)
at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:293)
Caused by: oracle.xml.parser.schema.XSDException: Start of root element expected.
at oracle.xml.parser.schema.XSDBuilder.build(XSDBuilder.java:350)
at oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin.processXMLDocument(CustomDocumentPlugin.java:772)
... 7 more
Please help.
Thanks in advance.
Thanks and Regards,
KaavyaHi,
Thanks for your reply.As OAGIS 9.0 xsd is not a single xsd it is the main xsd in which it imports multiple other xsd's.
So,firstly I have defined only the Root xsd so it gave an error for the other xsd which were imported into that xsd ,then I have zipped all these xsd's and uploaded it and i have also mentioned the starting XSD File path as ProcessPurchaseOrder while defining the Document Definition.
Thanks and Regards,
Kaavya. -
Error while validating flat file schema
Hi,
I have the flat file schema which is character delimited on '|'. It has Details and Tralier. Trailer starts with a "Tag Identifier" as 'T' and can have one value as "Total Records" i.e. T|3. Details is also delimited on the base of '|' and but has no "Tag Identifier".
Details have min occurs as 0.
Schema:
Eg of the valid values:
21788367|EN
21848269|EN
22004225|EN
T|3
This should also be the valid value (with no details and only trailer):
T|0
But, when I'm trying to validate this. I'm getting error:
Unexpected data found while looking for:
'\r\n'
The current definition being parsed is User_details. The stream offset where the error occurred is 2. The line number where the error occurred is 1. The column where the error occurred is 2.
I think it is trying to find Details record also. What setting I need to change?
Please help.
Kunal GThis is my schema:
<?xml version="1.0" encoding="utf-16"?>
<xs:schema xmlns="http://BTS_POC.Users" xmlns:b="http://schemas.microsoft.com/BizTalk/2003" targetNamespace="http://BTS_POC.Users" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:annotation>
<xs:appinfo>
<schemaEditorExtension:schemaInfo namespaceAlias="b" extensionClass="Microsoft.BizTalk.FlatFileExtension.FlatFileExtension" standardName="Flat File" xmlns:schemaEditorExtension="http://schemas.microsoft.com/BizTalk/2003/SchemaEditorExtensions" />
<b:schemaInfo standard="Flat File" codepage="65001" default_pad_char=" " pad_char_type="char" count_positions_by_byte="false" parser_optimization="speed" lookahead_depth="3" suppress_empty_nodes="false" generate_empty_nodes="true" allow_early_termination="false" early_terminate_optional_fields="false" allow_message_breakup_of_infix_root="false" compile_parse_tables="false" root_reference="Users_Root" />
</xs:appinfo>
</xs:annotation>
<xs:element name="Users_Root">
<xs:annotation>
<xs:appinfo>
<b:recordInfo structure="delimited" child_delimiter_type="hex" child_delimiter="0xD 0xA" child_order="infix" sequence_number="1" preserve_delimiter_for_empty_data="true" suppress_trailing_delimiters="false" />
</xs:appinfo>
</xs:annotation>
<xs:complexType>
<xs:sequence minOccurs="0">
<xs:annotation>
<xs:appinfo>
<groupInfo sequence_number="0" xmlns="http://schemas.microsoft.com/BizTalk/2003" />
</xs:appinfo>
</xs:annotation>
<xs:element minOccurs="0" maxOccurs="unbounded" name="Users_Detail">
<xs:annotation>
<xs:appinfo>
<b:recordInfo structure="delimited" child_delimiter_type="char" child_delimiter="|" child_order="infix" sequence_number="1" preserve_delimiter_for_empty_data="true" suppress_trailing_delimiters="false" />
</xs:appinfo>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:annotation>
<xs:appinfo>
<groupInfo sequence_number="0" xmlns="http://schemas.microsoft.com/BizTalk/2003" />
</xs:appinfo>
</xs:annotation>
<xs:element name="Name" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo justification="left" sequence_number="1" />
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:element name="Id" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo justification="left" sequence_number="2" />
</xs:appinfo>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="Users_Trailer">
<xs:annotation>
<xs:appinfo>
<b:recordInfo tag_name="T" structure="delimited" child_delimiter_type="char" child_delimiter="|" child_order="prefix" sequence_number="2" preserve_delimiter_for_empty_data="true" suppress_trailing_delimiters="false" />
</xs:appinfo>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:annotation>
<xs:appinfo>
<groupInfo sequence_number="0" xmlns="http://schemas.microsoft.com/BizTalk/2003" />
</xs:appinfo>
</xs:annotation>
<xs:element name="TotalNumber" type="xs:string">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo justification="left" sequence_number="1" />
</xs:appinfo>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
Kunal G -
Error while validating application in version 11.1.2.2
Hi guys,
This is the first time I work with EPMA, and I find it really challenging!
1) While trying to deploy the application after updating the Shared Library (all dimensions in the application are shared), I got the following error:
"Error: The 'View' dimension has been modified since the first successful deployment of the application".
I read it's not recommended to change the View dimension, but... if it is necessary, can you do it? The Scenario default frequency is MTD, and the only members I have in the View dimension are: YTD, QTD and Periodic. Periodic and MTD should work the same way, but I'm not sure if I can use it.
2) I also get some warnings in the Account dimension:
"The 'Hierarchies' section contains a duplicate entry for member "Sales_Tot'. I think this is related to an alternate roll up (IsPrimary property is set as "N"), but does it mean that the account is not going to be added to the alternate account roll up? Is there any way to avoid this kind of warning?
Thanks!
LuIf I remember correctly I think it caches the dimension information so if you add a new hierarchy doesn't update the cache, restarting clears the cache. Probably one to log with Oracle to see what they have to say.
Cheers
John
http://john-goodwin.blogspot.com/ -
"getting a javascript error while validating a JSP"
Hi folks,
Someone help me out with this problem.
I am getting a javascript validation error when I am trying to validate a JSP.
if(eval("document.frmAdminSowAssignValues.chkSowEmployee"+i).checked)
If I try to load a JSP page on a browser, it is giving a javascript error as
"'checked' is null or not a object".
Thanks.Hi Manoj,
Thanks for posting here.
I suggest you to clear all cookies and restart your IE. Let us know the results.
Also, I suggest you to try lauching Azure portal on a different browsers such as Firefox, Safari etc.
Girish Prajwal
Maybe you are looking for
-
Switching to Xserver/Xserve RAID
Hi boys and girls... I was looking for a little assistance in switching over to Xserve. Let me give you some background info first. Were a small studio in London, with only 11 people in-house and the majority working externally whether free-lance, fr
-
Hi, I have an iTunes account on my laptop set up to work with my old iPod. I now have an iPad and new iPod but set up under a different account- can I put all the songs from my iTunes onto the new devices. Thanks.
-
Sharing my experience, water spill accident on my Retina Macbook Pro
I would like to share my experience to the community and to fellow mac users regarding my water spill accident on my 1-week fresh Retina Macbook Pro. Before begining, i appologize for gramar or spelling mistakes since I am French and English is not m
-
after that my pc losse the sound, can sombody healt me.
-
Pass parameter to WD abap iview via Portal link
Hello all, I have created one WD ABAP application and I am accessing the same with the help of URL parameters. I am retrieving these URL parameters in 'HANDLEDEFAULT' event handler of the application window. Now client wants to access the same with t