Error with €-character in pdf417 bar code

Hey,
we have a problem with the Euro-Sign (€) in the bar code type pdf417. The encoding is set to "ISO-8859-15", but after creating the barcode and scan this, instead of the €-character the ?-character appears. Is this a bug in the encoding-routine? Or have we to set some special parameters?
Can anybody help?
Thanks!
Sygro

Assuming you are using the 2D PDF417 barcode, we do not support that character encoding. But, if you set the encoding to UTF-8, you should be able to scan the Euro symbol, assuming you scanner can read it.
We support the following encodings:
UTF-8
UTF-16
UCS-2
ISO-8859-1
ISO-8859-2
ISO-8859-7
Shift_JIS
KSC_5601
GB_2312
Big-Five
Font Specific

Similar Messages

Error with EURO-character in pdf417 bar code with adobe forms

Hi,
we have a problem with the Euro-Sign (u20AC) in the bar code type pdf417. The encoding is set to "ISO-8859-15", but after creating the barcode and scan this, instead of the u20AC-character the ?-character appears. Is this a bug in the encoding-routine? Or have we to set some special parameters?
Can anybody help?
Thanks!
Andreas
Edited by: Andreas Hempel on Nov 28, 2011 9:43 AM

Hi,
thanks for your reply, unfortunately the oss note doesn't solve the problem.
We print the barcode on a A5 formular with a HP Laserjet printer series.
Regards
Andreas

PDF417 bar code on Printronix

Hello,
We try to print PDF417 bar code on a Printronix printer.
The customer requires some hexadecimal characters like Group Separator (1D) or End Of Transmission (04) in the bar code sequence.
We have created an Abap program which includes the printer language and changed character set (9117) and device type (ZLB_PRI) for our printer.
OSS notes 137372 and 135894 have also been taken in account.
When we look into the SAP spool we see sequence
[)>#06#P12791961#Q7200#1JUN344672746092507667#2SKS0007596#BV012-10##
where the # stand for the hexa characters.
In Hexa display mode it looks OK
[)>#06#P12791961#Q7200#1JUN344672746092507667#2SKS0007596#BV012-10##
2523133153333333315333313454333333333333333333135453333333145333233102
AB9EE06D012791961D17200D1A5E344672746092507667D23B30007596D26012D10E4A
But it seems the printer receives the # instead of the hexa codes and
the bar code is not readable.
Could you please give us some advise what could be wrong.
Thank you for your help
Claudine

Hi,
We also facing the same problem with PDF417 special characters using ABAP program to print the LABEL. Could you please suggest how you resolved the issue. Any help will be highly apreciated.
Regards,
Praveen

How to use PDF417 Bar Code in Oracle Reports 6i

How to Use PDF417 Bar Code in Oracle 6i. One of my clients has a requirement that Customer Name and Address to be converted into PDF417.
Any help greatly appreciated.
Thanks,
PN

You will need to add this font to the system and Reports configuration files.
For adding font to the system, refer to your system specific guidelines for installing new fonts.
After you have installed this font on the system, you should be able to see the font in Reports builder font picker dropdown box. or with unix 'xlsfonts' command
For adding this font to the Reports application.
1. Modify the printer definition file ( you can get this info from uiprint.txt file for the .ppd or .hpd file used )
if the printer defination file is .ppd then look for "*Font Information" section and add the new font name there
like *Font <new_font_name> Standard '(00.1001)" Standard ROM
If hpd add the new font tfm file as
FONT= new_font_name
/tfm=new_font_tfm file.tfm
2. Copy the AFM or TFM ( these are fonts metrics files, which font vendor will provide ) into the relevant directory so the the Reports application should pick them up.
3. If necessary, make changes in the alias file (uifont.ali ) for mapping to this font. If the layout objects in your report are associated with the same font name as the new font then mapping is not required. But if the fonts for the layout objects are different then you need to map the original fonts to the new ones. Make sure that the mapping rules should be defined in the right section depending on the printer type being used.

PDF417 Bar code Prefix Spaces

Hi,
I am trying generate 2d Barcode from the system using PDF417. I was able generate and scan the barcode. But when the barcode is scanned, i am getting prefix of 7 blank spaces.
Please help in eliminating the prefix blank spaces.
Regards,
Venkat

The first thing you need to do is determine whether the problem is with the data contained in the bar code or an issue with the scanning hardware. The scanning hardware is programmable allowing you to prefix or append printable and non-printable characters to the bar code data. Go to this link and print out the sample PDF bar code. This bar code contains the entire Gettysburg Address and is what Symbol Technologies launched as part of their marketing campaign upon their development of the PDF417 algorithm in 1990. If the bar code scans correctly, then your problem is how you are encoding the data. Check your symbology specifications such as security level and error correction code. If after scanning the sample, you get the same leading spaces, then you have a hardware issue. Try resetting the scanner or imager to factory defaults. It is difficult for me to be any more specific based on the limited information in your post. One other thing you might try is to look at what you are passing in your data stream. There are several ways to do this but one reliable way is to put your printer in dump mode and capture the escape sequence that references the PDF font. This will be different depending on whether you are printing to a laser printer using PCL or Post Script or printing to a label printer using DPL, ZPL, etc.
http://www.yourdictionary.com/images/computer/_PDF417.GIF

Integration with Weighment scale and Bar Code reader

Our users requires that the PO Receiving / Issuance / Movements should be done using the Bar Codes (Item Code) and the Weighment bridge (Quantity). Have anyone tried to interface ORACLE EBS standard form or developed Customized form within OAFramework to integrate these devices with Oracle Forms? Your suggestions and guidance would be highly appreciated.
-- Ahmed

Hi Gareth,
Thanks for your response.
The requirement is that when we receive the items we bring the item on the Weighment scale on a Trolley. The bar code is scanned to get the Item information. The weight from the weiging scale is populated in the GROSS Weight field. Then we have to unload the items from the Trolley and weigh the empty trolley to calculate the net weight (Gross wt - Empty Trolley wt = Net Weight). This net weight is then considered as the Quantity received.
Hope this makes clear to you.
Regards.

We are facing error with user "PIDIRUSER". Response code is 401 in XI

Hi,
When we are trying to create objects in PI Integration Directory.
Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://cordev02:50000/rep/query/int?container=any" with user "PIDIRUSER". Response code is 401, response message is "Unauthorized":
Request all to please help me to resolve this Issue as this is holding up our XI development.
Regards,
Anand V

Hi Anand,
In order to solve this, ensure you have maintained the correct password, which MUST be the same, for all the service user on XI and ensure it has eight (8) characters in length.
You may check all the places it should be maintained, such as Exchange Profile, SU01, SLDAPICUST, etc..
Check the note below:
#999962 - PI 7.10: Change passwords of PI service users
Also ensure that the user has the correct role as per link below:
http://help.sap.com/saphelp_nwpi71/helpdata/en/9f/d12940cbf2195de10000000a1550b0/frameset.htm
Regards,
Caio Cagnani

URGENT!! Drill Down Error with Character Set non-ascii on Discoverer Viewer

Hi,
We have an error in a Drill down. It comes up when the Discoverer Viewer tries to process data that contains special character (non-ascii) in a query's filter. The same report that does not perform well with special characters, does perform well if the data dont contains special characters, so it seems to be an issue processing non-ascii chars in this Discoverer Viewer instance.
Ex. FIELD_NAME = 'Ã¶ÜÃ¦Ã¤é (This filter is contained in a query that this getting an error msg="We're sorry, the server encountered an unexpected condition" ).
It might be possible that there are some problems with the Discoverer charset ?
We will appreciate any suggestion about this respect.
Regrads,
Seba.

Sure,
This is the hole sql command that get an error in a drill down action process
SELECT NVL (sf_dw_people_skills.major_name, 'No Major'),
sf_dw_people_skills.minor_name, sf_dw_people_skills.skill_name,
sf_dw_people_skills.skill_level,
sf_dw_people_all_rel_v.supervisor_name,
sf_dw_people_all_rel_v.person_name, sf_dw_people_all_rel_v.LOCATION,
sf_dw_people_all_rel_v.supervisor_dir_name, COUNT (1)
FROM olnreport2.sf_dw_people_all_rel sf_dw_people_all_rel,
olnreport2.sf_dw_people_skills sf_dw_people_skills,
olnreport2.sf_dw_people_all_rel_v sf_dw_people_all_rel_v,
olnreport2.sf_dw_competences_rel sf_dw_competences_rel
WHERE ( (sf_dw_people_all_rel.person_id = sf_dw_people_skills.person_id
AND (sf_dw_people_all_rel_v.person_id =
sf_dw_people_skills.person_id
AND (sf_dw_competences_rel.skill_id = sf_dw_people_skills.skill_id
AND (sf_dw_people_all_rel_v.supervisor_id =
sf_dw_people_all_rel.supervisor_id
AND (sf_dw_people_all_rel_v.supervisor_name = 'Kunz, Jürgen Mr') /*When I replace the charset 'ü' by u, it´s work ok*/
AND (sf_dw_people_skills.minor_name = 'HRMS')
AND (sf_dw_people_skills.skill_name = 'HR Intelligence')
AND ( sf_dw_competences_rel.competence_type = :"competence_type"
AND sf_dw_competences_rel.competence_id IN ((:"competence_id"))
AND (sf_dw_people_all_rel.supervisor_id IN ((:"Manager")))
AND ((( :"resource_manager" <> -1
AND olnreport2.do_val_person_job_prod
('RESOURCE_MANAGER_VIEW',
sf_dw_people_skills.person_id,
sf_dw_people_skills.job_code,
sf_dw_people_skills.product_code,
:"resource_manager"
) = 'Y'
OR :"resource_manager" = -1
GROUP BY NVL (sf_dw_people_skills.major_name, 'No Major'),
sf_dw_people_skills.minor_name,
sf_dw_people_skills.skill_name,
sf_dw_people_skills.skill_level,
sf_dw_people_all_rel_v.supervisor_name,
sf_dw_people_all_rel_v.person_name,
sf_dw_people_all_rel_v.LOCATION,
sf_dw_people_all_rel_v.supervisor_dir_name;
Regards,
Seba.

PDF417, 2D bar code questions

Does anyone have experience (or can anyone point me to documentation) regarding the 2D bar codes supported by Documaker? We are using 11.5, and are interested in evaluating PDF417 or DataMatrix (or others) for scanning purposes. We have implemented a PDF417 solution using section rules rather than the bar code type in found in 11.5, but I am interested in using it for something other than New York ID cards. To that end, I'm not sure the PDF417 guide that I have found in the documentation section of the support site is useful, as the data we hope to bake into a PDF417 bar code wouldn't be parts of drive names, VINs, etc., I'm hoping there is a way to create our own name-value pairs for sue with the bar code. Is this possible? I have no experience with DataMatrix, so I am curious if we can implement a similar solution using that technology as well.
Thanks!
Tony

Hi Tony,
You may refer to the documentation on "Using Data Matrix 2-D Bar Codes" in the studio user guide.
http://docs.oracle.com/cd/E16256_01/dmstudioguide.pdf
Thank you,
Sruthi Jayasimhan

Bar Code don't show in PDF output

Hi,
I am trying to generate a BI publisher report from Oracle APEX with some text as Bar codes.
The report runs perfectly when run from BI publisher but when its run from APEX The Barcodes dont show when I select the output format as .pdf.
I tested for other output formats available in APEX like Word, Excel,HTML then the output is generated correctly with barcodes. Problem is only with PDF. Please help.

It's actually not that bad. That kind of corruption means that the program has got the wrong information about the size and height of the image.
For instance, if you had Peter's Avatar, which is a 46x46 image:
And you somehow thought it was 23x96 image, it would look like this:
and it looks like that's what's going on.
Save your image.
Open in Photoshop.
Save as a Portable Bit Map.
Open in a good editor, like Emacs.
The top of the file looks like this:
P6
46
46
255
Mess with the dimensions (46x46) until you get it right.
There's probably a better tool for this, but that's one.

Print Bar code for inspection report

Dear all,
I have a requirement for printing bar code in the inspection report. Normally, we use QGA3 print inspection report which based on the script form. Now as I would like to add bar code, as I know, I have to use smart form to realize. but it can just enter Form in the standard way. So could anyone give me some useful suggestion to realize this requirement?
Thanks a lot.
Best regards,
Benny.

Hi,
Identify corresponding form.In the character format we have to define the bar code and assign that one infornt of which we need the bar code.
eg:
SE71 screen if you go the character
there below you will get the bar code
specify one character for that bar code and
in place of which u want to print place it.
for eg u have character specified as bb,
and in place of Inspection lot (w_lot) you want to have bar code
the just type.
<bb>w_lot</>, this will print the bar code for instead of inspection lot
Regards,
Krishna Mohan
Edited by: Krishna Mohan N on Jan 22, 2008 7:26 AM

Info : Oracle Errors with Desc

Frnds this is the link where u can find all the oracle errors with the cause.
http://ora-code.com/
Hope u all find it beneficial.
~ VishaL

Not sure this adds much more to the docs, except Google Ads :P I suppose that once we've got the page up the ability to zip to a message by putting the code in the URL is marginally faster than looking it up in the book...
Cheers, APC

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

What do you mean by dynamically? When yo set up a 2D bar code field you specify which field name/value pairs you want to include, along with other parameters. But be aware that they won't work with Reader unless you Reader-enable the document with LiveCycle Reader Extensions and include the bar code usage right. It will work with Acrobat Standard/Pro.

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

Interface with SAP / Bar code scanner.

Hello,
we are going to integrate bar code reader to SAP directly
Our thought are , Scanning the bar code and then using IDOC or directly connected to SAP - ZTables for converting the data into the SAP system..
is it possible to convert the bar code information ( such us material / batch etc..) in to SAP with an interface.
Any Input will be appreciated
Thanks for your help
JJ

Hi JJ,
I may be just re-iterating what has already been said, but for clarity I will put down the points again, since I was also faced with the same confusion regarding how barcode and sap will work.
1. Barcode Scanner has nothing to do with SAP or any software.
   In simple terms, it is just like a keyboard. To demo;
    a) Plug in the barcode scanner in the USB port
    b) Open Notepad in windows
    c) The cursor will be inside the notepad
    d) Now scan the bar code against any barcode image.
          (Suppose the barcode image contains the information XYZABC)
   e) As soon as you scan, the characters   X Y Z A B C (without spaces)
      will AUTOMATICALLY GET TYPED on the screen, inside the notepad, at the place of cursor.
    Hence, the SCANNER just acts as a KEYBOARD.
   and autommatically types in the characters WHEREVER the CURSOR is.
   We can test this using notepad, Excel, word or any where the cursor can appear.
   We can test in any standard sap screen on any text field also, etc.
2. Saving the data in SAP.
    a) First we have to figure out how to save data in SAP,
        considering we are entering data MANUALLY.
   b) This can be a STANDARD Transaction or a Z transaction.
   c) Suppose the field / information is material number,
     then instead of TYPING the material number on the screen, in the field,
    we simply place the cursor on that field.
d) then we simply scan the image (containing information on material n umber) and hooooooray,
    it gets automatically TYPED IN on that field.
    Thats it. Other fields we may have to enter manually and press the SAVE button to save the data.
Scanner just saves TYPING the information manually, and hence reduces time and error both.
Hope this helps.
Regards,
Amit Mittal.

Error with €-character in pdf417 bar code

Similar Messages

Maybe you are looking for