Error with Console Keyboard

Has anyone ever received the error 'Error with Console Keyboard' when installing Solaris 8?
Before Solaris prompts me to select my language I get the
error 'Error with Console Keyboard'. When Solaris prompts me for the
language I cannot select it since my keyboard no longer seems to be
working.
I have no problems with my keyboard before this step.
Any help or insight would be greatly appreciated.
Regards,
S

Exactly!I have the same problem when I try to install Solaris 8 on Dell CPi laptop. who else can help us? please!

Similar Messages

  • "Error with console keyboard" in Solaris 8

    Hello,
    At the very beginning of Solaris8 boot I get
    "Error with console keyboard"
    and later OS does not react to keyboard. This non-USB keyboard.
    This keyboard does work ok in PROM monitor on same
    computer and this keyboard works ok with other sun box.
    So this keyboard is physically OK.
    When I do 'kbd -t', I get:
    ioctl(kbd type): Invalid argument
    What's wrong ? Can I configure the keyboard driver manually ?
    Jacob Lerner

    Exactly!I have the same problem when I try to install Solaris 8 on Dell CPi laptop. who else can help us? please!

  • Mac Mini HD errors with bluetooth keyboard

    I have a Mac Mini with bluetooth keyboard.  I cannot boot to OSX Recovery (command R).  Yet I need Disk Utility to repair HD errors.

    I found this link searching Apple Mac Mini Support: Apple Wireless Keyboards: Using startup keys.  Tried this and it worked on the second try.  Worked using Restart in the middle of the startup chime sound, not Shutdown.

  • Kernel errors with Logitech keyboard

    Hello,
    I have a core2duo iMac running 10.5 like a breeze. I have one problem though: my console log prints 4 lines of errors for each key i press. As you can understand, this is filling up the logs quite a bit. For every key i press, i get this:
    5/21/08 7:39:03 PM kernel final dcConfig = 0
    5/21/08 7:39:03 PM kernel returning 0
    5/21/08 7:39:04 PM kernel final dcConfig = 0
    5/21/08 7:39:04 PM kernel returning 0
    This site and Google both dont give me any result, there isn't even a mention of something called dcConfig associated with OSX. I'm open to any suggestion at this point: maybe some keylogger running and being broken? Several scanning apps couldn't find anything, but I cant be sure my system is 'clean'.
    The keyboard is a simple Logitech UltraX USB keyboard connected through a cheap noname usb hub. Bypassing the hub, the problem remains, so that isn't the problem.
    Anyone have a clue?

    The easy answer is that you probably don't have the proper drivers for your keyboard installed. The problem is that Logitech seems to have left Mac's out of their driver list for that model.
    Logitech has many mice and other products that do not work well with Mac's. The more complicated or custom the device, the less of a chance for satisfaction.
    Connect an Apple or a generic keyboard to your mac and see if the problem continues after a restarting with the Ultra keyboard disconnected. If the problem goes away then you'll probably have to work with Logitech for support.
    The good news is that due to recent popularity changes, more software and hardware companies are taking a new look at their Mac product lines

  • Error with backlit keyboard

    Hi guys.
    I recently have some problems with my Macbook Pro (13-inch, Mid 2012)
    The keyboard light is turned off and I can't adjust the light brightness of this because F5 & F6 doesn't work.
    I go to System Preferences> Keyboard and I can't find any option about illuminated keyboard, just disappeared of my mac.
    I recently installed Lab Trick to see if I can manually use the light settings on the keyboard, but it shows me the following error "Your Macintosh does not seem to have any available backlit keyboard."
    I tried resetting SMC, PRAM. But the problem continues.
    I haven't opened the mac yet.
    There will be some sensor cable disconnected?
    Will be necessary to carry warranty?

    Hi,
    I have the same Macbook Pro as you, and here is a picture of my Keyboard settings.
    I don't know why the bottom part of yours is blank. Maybe you can try this. Check the box for Use all F1, F2, etc. and then use the fn key on your keyboard together with F6 to see if it will bring up the brightness.
    Has your System Prefs Keyboard settings always been like this?

  • Iphone 5S error with thai keyboard

    Dear Apple,
    why thai keyboard not appear in my iphone 5S? it's occur after i jailbroken my idevice  
    can u tell me? how can i fix it to have the thai keyboard again?
    thanks with best regard,

    Ask the place where you got the defective jailbreak advice, not here.

  • Getting error on console after configuring MS SQL DB server with portal

    Hi,
    I am using WebLogic portal 10.2. I have configured MS SQL server with this portal as mentioned in:
    http://edocs.beasys.com/wlp/docs102/db/SQL.html
    After successfully performing all the steps mentioned in above link, when i try to start WebLogic Portal
    server i get following error on console:
    <Mar 17, 2009 2:00:31 PM GMT+05:30> <Notice> <Log Management> <BEA-170019> <The server log file C:\bea\wlserver_10.0\samples\domains\portal\servers\portalServer\logs\portalServer.log is opened. All server side log events will be written to this file.>
    <Mar 17, 2009 2:00:39 PM GMT+05:30> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Mar 17, 2009 2:00:39 PM GMT+05:30> <Error> <Security> <BEA-000000> <[Security:090759]A SQLException occurred while retrieving password information
    java.sql.SQLException: [BEA][SQLServer JDBC Driver][SQLServer]Invalid object name 'USERS'.
    at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
    at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
    at weblogic.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
    at weblogic.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
    at weblogic.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)
    Truncated. see log file for complete stacktrace
    >
    <Mar 17, 2009 2:00:39 PM GMT+05:30> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please e
    dit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
    <Mar 17, 2009 2:00:39 PM GMT+05:30> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid.
    The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the bo
    ot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
    at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    Truncated. see log file for complete stacktrace
    >
    <Mar 17, 2009 2:00:39 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <Mar 17, 2009 2:00:39 PM GMT+05:30> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
    <Mar 17, 2009 2:00:39 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    Autonomy server stopped.
    and server could not proceed further.
    How can we resolve above error?

    Hi,
    I have re-installed WebLogic Portal 10.2 and now i m trying to configure MS SQL server.
    When i use configuration wizard tool, i could successfully run database scripts and i could see table being created in database. But when wizard reaches its last screen and installation completes about 75%, wizard screen shows following error:
    Traceback (innermost last):
    File "<iostream>", line 14, in ?
    File "C:\Documents and Settings\Administrator\Local Settings\Temp\1\WLSTOfflineIni55090.py", line 118, in create
    com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.ScriptException: com.bea.plateng.domain.ValidateException: Property "Name" of SAMLCredentialMapperV2 with original name "Provider" is invalid. The property value is duplicated.
         at com.bea.plateng.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
         at com.bea.plateng.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1468)
         at com.bea.plateng.domain.script.jython.WLScriptContext.create(WLScriptContext.java:732)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
         at org.python.core.PyMethod.__call__(PyMethod.java:96)
         at org.python.core.PyObject.__call__(PyObject.java:248)
         at org.python.core.PyObject.invoke(PyObject.java:2016)
         at org.python.pycode._pyx319.create$29(C:\Documents and Settings\Administrator\Local Settings\Temp\1\WLSTOfflineIni55090.py:118)
         at org.python.pycode._pyx319.call_function(C:\Documents and Settings\Administrator\Local Settings\Temp\1\WLSTOfflineIni55090.py)
         at org.python.core.PyTableCode.call(PyTableCode.java:208)
         at org.python.core.PyTableCode.call(PyTableCode.java:293)
         at org.python.core.PyFunction.__call__(PyFunction.java:179)
         at org.python.pycode._pyx322.f$0(<iostream>:14)
         at org.python.pycode._pyx322.call_function(<iostream>)
         at org.python.core.PyTableCode.call(PyTableCode.java:208)
         at org.python.core.PyCode.call(PyCode.java:14)
         at org.python.core.Py.runCode(Py.java:1135)
         at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
         at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:162)
         at com.bea.plateng.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:911)
         at com.bea.plateng.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:878)
         at com.bea.plateng.domain.DomainChecker.preprocessOutput(DomainChecker.java:135)
         at com.bea.plateng.domain.TemplateImporter.generate(TemplateImporter.java:248)
         at com.bea.plateng.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:232)
    Caused by: com.bea.plateng.domain.script.ScriptException: com.bea.plateng.domain.ValidateException: Property "Name" of SAMLCredentialMapperV2 with original name "Provider" is invalid. The property value is duplicated.
         at com.bea.plateng.domain.script.ScriptExecutor.create4SubTypeObject(ScriptExecutor.java:955)
         at com.bea.plateng.domain.script.jython.ScriptProxyFactory.deepCreateProxy4SubTypeObject(ScriptProxyFactory.java:128)
         at com.bea.plateng.domain.script.jython.WLScriptContext.create(WLScriptContext.java:728)
         ... 25 more
    Caused by: com.bea.plateng.domain.ValidateException: Property "Name" of SAMLCredentialMapperV2 with original name "Provider" is invalid. The property value is duplicated.
         at com.bea.plateng.domain.aspect.XBeanConfigAspect.selfValidate(XBeanConfigAspect.java:630)
         at com.bea.plateng.domain.aspect.AbstractConfigAspect.validate(AbstractConfigAspect.java:1130)
         at com.bea.plateng.domain.aspect.AbstractConfigAspect.selfSetValue(AbstractConfigAspect.java:1615)
         at com.bea.plateng.domain.aspect.AbstractConfigAspect.setValueInternal(AbstractConfigAspect.java:1574)
         at com.bea.plateng.domain.aspect.AbstractConfigAspect.setValue(AbstractConfigAspect.java:748)
         at com.bea.plateng.domain.aspect.AbstractConfigAspect.setValue(AbstractConfigAspect.java:757)
         at com.bea.plateng.domain.operation.HTableEditOperation.createSimpleConfigAspects(HTableEditOperation.java:265)
         at com.bea.plateng.domain.script.ScriptExecutor.create4SubTypeObject(ScriptExecutor.java:930)
         ... 27 more
    Caused by: java.beans.PropertyVetoException: The property value is duplicated.
         at com.bea.plateng.domain.event.aspect.UniqueValueValidateListener.valueChanged(UniqueValueValidateListener.java:127)
         at com.bea.plateng.domain.event.aspect.ConfigAspectValueListener.vetoableChange(ConfigAspectValueListener.java:138)
         at com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:189)
         at com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:156)
         at com.bea.plateng.common.comdev.MVetoableChangeSupport.fireVetoableChange(MVetoableChangeSupport.java:139)
         at com.bea.plateng.domain.aspect.XBeanConfigAspect.selfValidate(XBeanConfigAspect.java:620)
         ... 34 more
    com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.ScriptException: com.bea.plateng.domain.ValidateException: Property "Name" of SAMLCredentialMapperV2 with original name "Provider" is invalid. The property value is duplicated.
         at org.python.core.Py.JavaError(Py.java:324)
         at org.python.core.Py.JavaError(Py.java:311)
         at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:163)
         at org.python.core.PyMethod.__call__(PyMethod.java:96)
         at org.python.core.PyObject.__call__(PyObject.java:248)
         at org.python.core.PyObject.invoke(PyObject.java:2016)
         at org.python.pycode._pyx319.create$29(C:\Documents and Settings\Administrator\Local Settings\Temp\1\WLSTOfflineIni55090.py:118)
         at org.python.pycode._pyx319.call_function(C:\Documents and Settings\Administrator\Local Settings\Temp\1\WLSTOfflineIni55090.py)
         at org.python.core.PyTableCode.call(PyTableCode.java:208)
         at org.python.core.PyTableCode.call(PyTableCode.java:293)
         at org.python.core.PyFunction.__call__(PyFunction.java:179)
         at org.python.pycode._pyx322.f$0(<iostream>:14)
         at org.python.pycode._pyx322.call_function(<iostream>)
         at org.python.core.PyTableCode.call(PyTableCode.java:208)
         at org.python.core.PyCode.call(PyCode.java:14)
         at org.python.core.Py.runCode(Py.java:1135)
         at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
         at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:162)
         at com.bea.plateng.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:911)
         at com.bea.plateng.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:878)
         at com.bea.plateng.domain.DomainChecker.preprocessOutput(DomainChecker.java:135)
         at com.bea.plateng.domain.TemplateImporter.generate(TemplateImporter.java:248)
         at com.bea.plateng.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:232)
    what should i do?

  • Recovery Order in Error with: AiaResubmissionUtility or EM Console?

    I am using AIA 11g and I know that the AiaResubmissionUtility works on the message in the queue and EM Console with the instance committed on the database but I do not know what can be the best practice to recovery the message.
    I would like to know if in this version I can perform the recovery of messages thought the AiaResubmissionUtility or with the EM console.

    In AIA methodology, the message should always be resubmitted from the start of the milestone i.e. queue/topic/resequencer. Also the message will be rolled back to the start of milestone in case of any error with in the flow between two milestones. You should go with re-submission utility.
    Hope this helps.

  • Error by console with jvm of sun

    Hello everybody:
    I have an application makes with applets, but I get the next error by console:
    java.lang.ClassCastException: sun.plugin.AppletViewer cannot be cast to java.awt.Frame
         at onda.gui.AppValidacion.init(AppValidacion.java:82)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    I have no any cast.
    I write you the init method about you look for any error. Thank very much. Regards
    public void init()
    //DM solo desarrollo
    // txtUsuario.setText("PGAMEZRE");
    // txtPassword.setText("PGAMEZRE99");
    txtUsuario.setText("");
    txtPassword.setText("");
    //fin DM
    try
    appPadre = ((appPadre == null) ? this : _appPadre);
    _sap = new SAPConnect();
    dl = new Dialog(new Frame(),"Validaci?n del usuario",false);
    td = new TextoDescriptivo();
    jbInit();
    _dbAccess = new DBAccess();
    //Cambiado el 31-03-2000 para poder llamar a la validaci?n
    //desde otro sitio que no sea la aplicaci?n
    ok = new MsgBox( "", MsgBox.OKIMAGE, this, false );
    stop = new MsgBox( "", MsgBox.STOPIMAGE, this, false );
    ok = new MsgBox( "", MsgBox.OKIMAGE, _appPadre, false );
    stop = new MsgBox( "", MsgBox.STOPIMAGE, _appPadre, false );
    msg = new Mensaje( dbAccess );
    catch (Exception e)
         e.printStackTrace();
    txtPassword.setEchoChar( '?' );
    dl.setResizable( false );
    dl.setVisible( true );//comentada DM solo desarrollo 20020219
    /*System.out.println("REQUEST_HEADER1:" + Entorno.REQUEST_HEADER1);
    System.out.println("classes_DB_HEADER:" + Entorno.CHANGES_CLASSES_HEADER);
    System.out.println("DB_HEADER:" + Entorno.CHANGES_DB_HEADER);
    System.out.println("TEST_HEADER:" + Entorno.TEST_HEADER);
    //try{valida();}catch(Exception excep ){}//DM solo desarrollo 20020219
    }

    Then I think that is not the source code of the class file you are running. Remove the class file (or backup somewhere else) and compile again.
    Run it or run it with a debugger and step through the code to see what happens.

  • Itunes console errors with iphone attached

    anyone else seeing these errors with itunes?
    6/7/11 1:16:45 PM          iTunes[863]          _AMDDeviceAttachedCallbackv3 (thread 0xb0513000): Device 'AMDevice 0x454c8b0 {endpoint type = USB Mux, location ID = 0xfd310000, product ID = 0x1292, UDID = 74586deb7c993a148e8d2a23205f4a697dd60ffb, device ID = 1, Valid = 1, Retain Count = 2}' attached.
    6/7/11 1:16:45 PM          kernel          Message Version Check or Length Not Match.
    6/7/11 1:16:45 PM          kernel          Message Length Check - msglength = 3152, expectingLength = 3152
    6/7/11 1:16:45 PM          kernel          Message Version Check - msg(0.0.0)@0xffffff8019241030 atifb:(3.1.0)
    6/7/11 1:16:45 PM          kernel          Message Version Check or Length Not Match.
    6/7/11 1:16:45 PM          kernel          Message Length Check - msglength = 3152, expectingLength = 3152
    6/7/11 1:16:45 PM          kernel          Message Version Check - msg(0.0.0)@0xffffff801926e030 atifb:(3.1.0)
    6/7/11 1:16:45 PM          kernel          Message Version Check or Length Not Match.
    6/7/11 1:16:45 PM          kernel          Message Length Check - msglength = 3152, expectingLength = 3152
    6/7/11 1:16:45 PM          kernel          Message Version Check - msg(0.0.0)@0xffffff801924a030 atifb:(3.1.0)
    6/7/11 1:16:47 PM          AppleMobileDeviceHelper[866]          _AMDDeviceAttachedCallbackv3 (thread 0xa08bd540): Device 'AMDevice 0x620ef0 {endpoint type = USB Mux, location ID = 0xfd310000, product ID = 0x1292, UDID = 74586deb7c993a148e8d2a23205f4a697dd60ffb, device ID = 1, Valid = 1, Retain Count = 2}' attached.
    6/7/11 1:16:55 PM          kernel          Message Version Check or Length Not Match.
    6/7/11 1:16:55 PM          kernel          Message Length Check - msglength = 3152, expectingLength = 3152
    6/7/11 1:16:55 PM          kernel          Message Version Check - msg(0.0.0)@0xffffff801825b030 atifb:(3.1.0)
    6/7/11 1:16:55 PM          kernel          Message Version Check or Length Not Match.
    6/7/11 1:16:55 PM          kernel          Message Length Check - msglength = 3152, expectingLength = 3152
    6/7/11 1:16:55 PM          kernel          Message Version Check - msg(0.0.0)@0xffffff8018450030 atifb:(3.1.0)
    6/7/11 1:16:55 PM          kernel          Message Version Check or Length Not Match.
    6/7/11 1:16:55 PM          kernel          Message Length Check - msglength = 3152, expectingLength = 3152
    6/7/11 1:16:55 PM          kernel          Message Version Check - msg(0.0.0)@0xffffff8017f3d030 atifb:(3.1.0)
    caused by itunes connecting to iphone 3G (good ole locked at 4.2.2 one)
    it does this once or twice, before it grabs device and mounts it into itunes. i don't know if this is just itunes getting impatient with a device that's slow by comparison to newer models it was expecting.
    on plus side, the new update seems to have fixed the other error that's spam console every minute endlessly for entire duration a device was plugged in

    I tried something else.  I created a new account on my computer, launched itunes, and plugged in the iPhone 4.  The summary screen came up.  I subscribed to a podcast, clicked on the iPhone (not crashed) and synched podcasts.  Synch completed ok.  Other iPhone content is not affected. 
    So something is wrong with my account on this computer?  Where are account stuff stored for an iPhone or iTunes?  Or is it something else? 
    Thanks for any input.

  • Errors with Time Machine (not completing backup, and needing to erase the ".inProgress" package)

    I have in a previous discussion been talking about errors with my Time Machine backup.  The errors were with a problem with Indexing a file, it fails and stops the whole backup.  Each time it attemps another backup, it fills my ".inProgress" package with a (nearly) whole backup, filling my Time Machine hard drive, and thus errasing my previous good backups.  The error occurs after about 95% completion.
    In my last post of a similar disscussion, the problem was indexing the Preference Pane files and this caused the whole backup to fail.  This was my last post there:  (below in some additional info of my situation)
    I did exclude the MobileMe.prefPane.  And I got:
    12/16/11 9:24:50.468 PM com.apple.backupd: Starting standard backup
    12/16/11 9:24:50.556 PM com.apple.backupd: Backing up to: /Volumes/3 TB GoFlex Drive/Backups.backupdb
    12/16/11 9:25:14.418 PM com.apple.backupd: Waiting for index to be ready (101)
    12/16/11 9:27:02.366 PM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|
    12/16/11 9:27:02.366 PM com.apple.backupd: Finished scan
    12/16/11 9:33:37.119 PM com.apple.backupd: Deep event scan at path:/Volumes/Mac OS Lion GM reason:must scan subdirs|
    12/16/11 9:33:37.119 PM com.apple.backupd: Finished scan
    12/16/11 9:36:15.650 PM com.apple.backupd: 758.92 GB required (including padding), 830.32 GB available
    12/16/11 10:25:14.873 PM com.apple.backupd: Copied 22.8 GB of 630.5 GB, 782749 of 2357620 items
    12/16/11 11:25:15.335 PM com.apple.backupd: Copied 86.6 GB of 630.5 GB, 1167675 of 2357620 items
    12/17/11 12:25:16.227 AM com.apple.backupd: Copied 152.2 GB of 630.5 GB, 1393795 of 2357620 items
    Dec 17 01:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 305.2 GB of 630.5 GB, 1413946 of 2357620 items
    Dec 17 02:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 457.1 GB of 630.5 GB, 1419190 of 2357620 items
    Dec 17 03:19:07 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 1736865 files (568.3 GB) from volume Macintosh HD.
    Dec 17 03:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 572.1 GB of 630.5 GB, 1848939 of 2357620 items
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Indexing a file failed. Returned 200 for: /Volumes/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane, /Volumes/3 TB GoFlex Drive/Backups.backupdb/Tom iMac/2011-12-14-171406.inProgress/7DB524DD-EFB9-42A6-8A21-0A2A312EDA6D/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Aborting backup because indexing a file failed.
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Stopping backup.
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 2164998 files (581.1 GB) from volume Mac OS Lion GM.
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copy stage failed with error:11
    Dec 17 03:40:50 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Backup failed with error: 11
    This time it was the Mouse.prefPane that caused the error.  I'd like to exclude the entire PreferencePanes directory.
    This was my error message this time:
    I just realized this was on my small Developers partition.  Perhaps there is an error with the build, OR an error with the initial restore.  I'd like to perhaps exclude the entire /Volumes/Mac OS Lion GM.  I expect that Time Machine is working fine with my main partition and the error happens when it's almost done with the Mac OS Lion GM partition.
    The problem now is that I only have 265 GB of 3 TB available on my Time Machine HDD.  If attempt another backup, it'll surely erase about 410 GB of my past saved backups.  I've already lost 6 months, and I only have two months left of backups.  I need to erase the ".inProgress" package again.  That'll take time, and it's impossible to do from this main partition, even at root access.  This ".inProgress" has a total of two (nearly) full backups; it didn't cleanup the first full backup attempt while starting the second,perhaps it would have had it finished.  But I fear even if I exclude the whole "Mac OS Lion GM" partition,  It'll create a third full backup before cleanup and erase ~400 GB of previous good backups.  Then, I'll have a total of 4 (nearly) full backups!  3 TB is just enough without any past backups.
    Maybe I'll just copy my documentations of my 'errasing the ".inProgress" package'  last time (from the Mac OS Lion GM partition) and do a full restore of just that partition.  Thus erasing the errors all together.  If it doesn't fix the errors then this could be a bug in the build that doesn't allow Time Machine to work.  I've always included this partition in Time Machine before, even with other Lion builds, so I suspect that it was an error in the initial restore.  (I may be answering my own questions, and that the inital restore (of the small partition) is the problem, and I just need to re-restore the small partition)
    Again, I'm going to have to erase the ".inProgress" file to regain 1.53 TB of space before proceeding.
    Also, I gave myself permission to read the ".Backup.345781513.887697.log", the log that was created last night when I first started Time Machine this last time.  It was interesting, but didn't show the error I could see from the console.
    Right now, mds and mdworker appear to be going crazy even after I just now turned off Time Machine.  I think I'll let it go for the rest of the night.  Then I'll work on erasing the ".inProgress" package from the other partition boot up.
    That was my entire last post.  To add some information, I have two OS X partitons, both Mac OS X Lion.  One is my large main partition, the other is one I don't mind testing with.  I recently replaced my internal hard drive in my iMac and restored from Time Machine both partitions.  This appeared to go smoothly.  But I have yet to create a single successful Time Machine backup since.  At first it was doing a Full Backup, which I didn't like, but now it just aborts around 95% completion.  Each, time, it tries it fills the Time Machine hard drive with duplicate (nearly) full backups errasing my older good backups.  I would like to erase the ".inProgress" file to save space.
    My main question in this new discussion is does anyone know of a good way of erasing the ".inProgress" file? This is so I can preseerve my previous backups.  ACLs and other permissions seem to make it impossible to erase from this startup partition, the one I'm running Time Machine from.  Even at root level, if I give myself permission to change permissions or delete a file, it'll say Operation not Permitted instead of Permission Denied.  I have been able to delete this ".inProgress" package before when booting from the other  partition, but with great difficulty.  I have had much help from another Member in this Support Community when it comes to solving my Time Machine problems.  I think I have found the problem (indexing files in my small OS X partition), as stated in my copy& pasted post above, but I really need to delete this inProgress package first to save space before continuing!

    Pondini wrote:
    Gator TPK wrote:
    Now I'll have to fix the small partition?  How's the best way to do this?  There could be thousands of files that won't index fine.
    See if there's anything you haven't done, that applies, in the pink box of #C3 in Time Machine - Troubleshooting
    Otherwise, since most (or all?) of the indexing errors are in OSX, you might want to just reinstall it.  Something may have gone wrong sometime, that damaged those files.
    I reviewed #C3 in Time Machine - Troubleshooting and I have already done most of those things.  I have just learned something new though:
    When I included my Main OS X partition again, I got an indexing error for the first time for that partition.  I might be interesting to note that the _spotlight process was running, and it's running again (the magnifying glass has a dot and it generically says "Indexing Tom's iMac").  mdworker, mds and backupd processes really are working hard, one moment they used over 500% of my CPU.  It's nice to know for once quad core is good for something other than video encoding.  (Now if they could just get the Finder to do more than 100.1%, only 1 thread is doing 100%, I'd like to see file size calculations 8 times quicker!)
    I never got an indexing error once in the past 2 weeks for that large Mac OS X v10.7.2 main volume, and it had appeared to finish that partition backup before running into problems with my smaller test partition.  Also, I had just updated the smaller test partition with a later build of Mac OS X.  But It appears that the beta builds are clearly not the problem.  I thought I could just restore again (from the December 4th backup) the small partition and both would be fine.
    I'll finish reviewing all the suggestions on Time Machine - Troubleshooting and go from there.  Hopefully, the _spotlight indexing simutaniously was the only problem.  It's strange that the indexing hasn't happened since the original restore last week untill I finally got a good clean complete partial Time Machine backup.  Why would the first Time Machine backup trigger indexing again?
    For now, I'm going to exclude the Main Partition again, and let another good backup run.  And try your suggestions.  (And wait till mds, mdworker, etc. to finish!)
    I have the logs of the first two sucsessful backups and the last two failed backups from the last 3 hours, if that would help.?

  • Problem with Consolas font in a form

    I have problem with Consolas font in a form in latest Adobe Reader (v11.0.9)
    It shows dots (password sign) instead of letters. Edit box is not configured for passwords.
    Form was created by Foxit PhantomPDF and it shows correctly in Foxit.
    Can somebody check PDF for errors or warnings?
    http://www60.zippyshare.com/v/71759184/file.html

    You should embed these fonts in the document.
    If you need more help with this, please ask in the Acrobat forum.

  • 10.6.5 Mail.app_Console errors with certain MobileMe mailboxes

    I have errors in Console due to failures in opening the Sent Mail Folders in MobileMe- notably Sent Messages, Sent Items, Drafts. These errors seem to cause Mail to quit and may also have caused the recent kernel panic on this machine. Recovered from kernel panic I saw the console log of errors. That led to discovering the locked folders.
    Surprised to learn, in looking for the point of failure, that somehow the mailboxes preferences were changed to inaccessible to me, and therefore could not be accessed within my username in Mail. I think that caused the problem. Am unsure what did caused this, when it happened, or why this occurred. It is clearly a problem though. Compared with my MacPro (same version OS, Mail) and that is definitely not right.
    I noticed this today after several times that Mail quit inexplicably followed by a kernel panic.
    Henry
    So to my questions:
    1. How to fix it? Terminal would get me there but what settings to use?
    2. How to keep it from recurring?
    If you have an idea to save some time on hold with Apple support (and BTW, some really bad advice from them awhile ago about Disk Utility, but I digress...) please advise. You can download a screenshot of the locked file folders (in ~/Users/Library/Mail/Mac-xxx).

    Also, when clicking on the little "trash" symbol to erase a message, it seems to be completely inactive and only does the job if I forcibly click on it 3-4 times....
    It is very frustrating!
    Try using the Delete key.

  • Error with update my windows phone 801883f error couldn't be installed

    Dear Sir,
    Plz Solve this Issue ASAP
    error with update my windows phone 801883f error couldn't be installed 
    therefore, i can't update my windows phone
    Salim

    Hi,
    This error code means that the specified path couldn't be found.
    To fix this issue, I suggest we try following steps and try to reinstall again:
    Step 1: Clean update temp files:
    1. Press Windows key + R, type service.msc and press enter. 
     2. Stop Windows update service.
    3. Run following command lines one by one to clear update temp files:
    cd %windir%
    ren SoftwareDistribution SDTemp
    exit
    4.  Restart Windows update service.
    Step 2: Clear windows store catch:
    Press the Windows + R keys on your keyboard to open the Run dialog.
    Type WSReset.exe, and click/tap on OK.
    The Store will now open, and state the following: The cache for the store was cleared. You can now browse the store for apps
    Then, please try to update Windows 8.1 again.
    Regards,
    Kate Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • BPEL: invalid namespace error with DB adapter polling and java embedding

    Hello
    I'm using bpel 10.1.3.1.0, and I'm experiencing the following problem: I'm am not able to use the SetTitle() function in a process which polls for records using the db adapter.
    Steps to reproduce the problem:
    - I create a very simple bpel process which poll for records in a table.
    - I deploy it, write manually a record in the polled table and the process start.
    - I can see the record picked up through the visual flow in the console
    - everything looks ok and the process ends correctly
    - now I add a java embedding activities just after the receive
    - I set the instance title like this: setTitle("Go");
    - redeploy, write a record in the polled table and the process start.
    - but the process ends in error with the following message "XMLDOMException has been thrown. invalid namespace for prefix xmlns"
    And there is no way to make it work. Consider:
    If I put the same java embedding activity in another process, for example a simple asynchronous process which just copy the input to the output, and I run from the console, the instance title is set as I want ("Go")
    If I remove the three lines from the polling process
    <bpelx:exec name="Java_Embedding_1" language="java" version="1.3">
    <![CDATA[setTitle("Go");]]>
    </bpelx:exec>
    then the process is executed correctly again. I add them again and then namespace error.
    Whatever statement I put in the java embedding activity (for example a string concatenation or even just a comment I have the same result: invalid namespace for prefix xmlns.
    Does anybody has a suggestion to evercome the problem? I need to set the title because its a mess to find out which instance processed a specific record.
    Thanks by
    Paolo

    I made a lot of further tests, and I can say the problem is related only to the database adapter polling mechanism.
    If I create an asynchronous process, with any kind of database activity (for example select) I can set the title normally.
    If I create a process which start with database table polling, then I cannot use the java embedding.
    try this:
    - create BPEL empty project
    - drop a database adapter service and follow the wizard:
    - select a connection (I tried both oracle or sqlserver connection)
    - select "poll for new or changed record"
    - select any table empty or with few record inside (1 or 2)
    - press next 4 times
    - chose delete record after read (press next)
    - chose order by "no ordering" in polling options (press next 2 times)
    - now drop a receive activity on the process, and connect with the polling partner link
    - drop a java embedding and write any valid java statement
    - deploy; if the table is empty, write a recod in the table
    - the process is instantiated, but the it fails in the --> receive <-- activity with "invalid namespace" error

Maybe you are looking for

  • XML Publisher report stuck at Calling XDO Data Engine...

    Hi ! I am upgrading a custom report from 11i to R12 , the report works fine in 11i but when moved to R12 the report is stuck at "Calling XDO Data Engine..." and then it doesnot parse the Template. Below are the logs from the request: XDO Data Engine

  • Windows 8.1 with Bing ISO

    Hi, I need to replace Windows 8.1 with Bing x64 for the x86 version in order to use some old apps. I tried to use mediacreationtool to download the setup, but it does not have the "with Bing" edition. Where can I download the x86 ISO for this edition

  • Berkeley db aix link error

    AIX 5.3 xlC_r Version 5 db-5.3.21 Any help would be appriciated. xlC_r -o excxx_example_database_load excxx_example_database_load.o MyDb.o InventoryData.o -g -O2 -D_THREAD_SAFE -L../lib -L/usr/lib -ldb_cxx -lrt -ldb_cxx ld: 0711-317 ERROR: Undefined

  • Track opacity issues

    I am using 2 lines of video. When I want to fade out from a clip on the bottom line into the one on the top line, I use the pen tool to create keyframes in the timeline for opacity by simply dragging the opacity line to a diagonal shape. Most of the

  • Why is my internet soooo slow?

    My internet has been so slow now. I want some answers to why this is happening, or how I can resolve it before I call customer service. I mean it is VERY SLOW. Feels like dial-up all over again. I have had verizon for 5-7 years or so. And every year