Error with installing oracle on linux

hi all
i tried to install oracle on oracle enterprise linux REL 5 but error occurred like that :
[oracle@aedc1 ~]$ /mnt/database/runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-07-14_02-20-04AM. Please wait ...[oracle@aedc1 ~]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-07-14_02-20-04AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
i want to solve this issue plz

Hi Ora2009,
You can refer the following ML doc,
[Exception java.lang.UnsatisfiedLinkError /jre/1.4.2/lib/i386/libawt.so libXp.so.6 cannot open shared object file No such file or directory occurred on RHEL5/OEL5 for 10.2 x86 or x86_64 install|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443617.1]
Thanks,
Anchorage :)

Similar Messages

Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110

eth0      Link encap:Ethernet HWaddr 00:15:17:F7:81:53
          inet addr:192.1.1.11 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b) TX bytes:15868 (15.4 KiB)
          Memory:dfcc0000-dfce0000
eth1      Link encap:Ethernet HWaddr B8:AC:6F:92:C2:0C
          inet addr:192.1.1.9 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:18959341 (18.0 MiB) TX bytes:9476 (9.2 KiB)
          Interrupt:169 Memory:dfbf0000-dfc00000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4035655 (3.8 MiB) TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
Thanks
A/A

This looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
# netstat -rn
# cat /etc/resolv.conf

Error While Installing Oracle On Linux Red Hat.

Hi,
For the last two days, I am trying to install Oracle 9i on Linux Redhat, but no vail. This is the error I come across--
"Initializing Java Virtual Machine From /tmp/OraInstall0/jre/bin/jre. Please wait...
:symbol errno. version GLIBC-2.0 not defined in gile libc.so.6 with link reference (libzip.so) unable to initialize thread: cannot find class java/lang/thread
Could not create Java VM."
I hope this forum would help me out.
Thanks in advance.

try execute: export LD_ASSUME_KERNEL=2.4.1 before you run ./runInstaller
Btw try look at http://www.puschitz.com for installation guide.

Error when Installing Oracle on Linux

Hi Guys,
Hope u guys can help. Im installing oracle 8 on suse 9 to perform a system copy (this is a target system). but stuck in phase linking Oracle 8 :
Error in invoking target install of makefile ../../ins_sqlplus.mk
when i tried to install it manually :
make -f ins_sqlplus.mk install, it came out an error that says libclntsh.so: undefined reference to '__ctype_toupper'
Any one can help me with this?
Thanks

Hi,
if you already looked at the PAM - i wonder why asking for such an OS related problem.
> So the only option I have is to update the OS and do the migration there.Is Oracle 9 backward compatible? i.e I copy the offline data (Oracle 8) to Oracle 9
If you just want to copy the oracle control-/datafiles, etc. - no it will not work. You have to do a normal oracle upgrade to get your Oracle 8i database running on Oracle 9i.
Regards
Stefan

Error while installing oracle on Linux

Hi everyone
i am trying to install SAP 4.6C on SUSE Linux.I have completed till CI n when it stops us to install Oracle, during the installation of Oracle it dtops at 18% saying
" copying naeet.o" n link pending.Can anyone suggest me the solution.
It is urgent.
Thanks in ADVANCE

Hi,
Try this set the variable
kernel enviironment variable LD_ASSUME_KERNEL=2.4.21
regards
Vinod

Error while installing Oracle in Linux...

Dear All,
I am tring to install Oracle9i(Database Release 2 (9.2.0.4.0) for Linux x86) in Fedora Core 6. While i m installing the JRE (j2re-1_3_1_15-linux-i586.bin) it shows the following error...
############# ERROR #######################
tail: cannot open `+286' for reading: No such file or directory
Checksumming...
1
The download file appears to be corrupted. Please refer
to the Troubleshooting section of the Installation
Instructions on the download page for more information.
Please do not attempt to install this archive file.
Can any one help me regarding this matter.
Or suggest me what to do.
Imtiaz

Dear All,
I am tring to install Oracle9i(Database Release 2
(9.2.0.4.0) for Linux x86) in Fedora Core 6. While iI don't think Oracle9i is certify with Fedora Core. Check Oracle's Certification Matrices
Virag

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

Error while installing oracle R2 on linux

hi guy's,
first of all plz forgive me if i am placing this at wrong place.
actually i am trying to install oracle database 10g R2 on RHEL5 x86 platform.i complated all prerequisite for installing oracle on linux specified at
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php#Installation
but i am getting following errors while installation.
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-12-12_08-39-28PM. Please wait ...[oracle@SW044 /]$ Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using 'sw044:0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
what this error represents ?? what steps should i follow?
plz help
thanks and regards
VD

actually sir i am doing this as oracle user.
and i have set DISPLAY=<machine-name>:0.0; export DISPLAY environment corrctly,and i ma using X emulation.
now what is the problem?
thanks and regards
VD

Error while installing oracle 9i(9.2.0.1.0) on Red Hat Linux 8

hi
friends,
i'm getting error while installing Oracle 9i(9.2.0.1.0). this eror was came when linking process was going on. Error is as follow.
"Error in invoking target install of make file"
/home/oracle/product/9.2.0/plsql/lib/ins_plsql.mk"
/home/oracle/product/9.2.0/precomp/lib/ins_precomp.mk"
/home/oracle/product/9.2.0/sqlplus/lib/ins_sqlplus.mk"
/home/oracle/product/9.2.0/network/lib/ins_oemagent.mk"
pls. help me what to do?
Dharmesh

See this :
I saw this error only in connection with Oracle 9i (9.0.1) installation.
Edit the file $ORACLE_HOME/bin/genclntsh and change the following line (people have sent me emails pointing out that this also works for Mandrake 8.1 and Mandrake 8.2):
LD_SELF_CONTAINED="-z defs"
to read:
LD_SELF_CONTAINED=""
Then run the script $ORACLE_HOME/bin/genclntsh as the user "oracle" and not as the user "root". Also make sure you have all the Oracle environments set! (I got so many emails because people were not doing this)
$ su - oracle
$ $ORACLE_HOME/bin/genclntsh
Created /opt/oracle/product/9.0.1/lib/libclntst9.a
$
After that hit retry in the error popup. This always worked for me.
(I was told that this also works for SuSE 8.0.)
Here is Oracle's official solution for Oracle 9iR1 or 9iR1 iAS on RedHat 2.1 Advanced Server:
http://otn.oracle.com/software/products/oracle9i/files/binutils_readme.html
from: http://www.puschitz.com/OracleOnLinux.shtml
Hope it help you
Basem

Error While Installing ORACLE 10g in Redhat Linux 5.0

Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev George

Sajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Error Installing Oracle on Linux

Hello All,
I'm getting a tampering error while installing Oracle on a fresh linuxbox.
When I attempt to create a new DB by dbca I get the following error traced by the tool:
Oct 31, 2006 12:37:24 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /oracle/oracle/product/10.2.0/db_1/bin/emctl start dbconsole
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 2
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: TZ set to Europe/Vatican
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: EM Configuration issue. /oracle/oracle/product/10.2.0/db_1/oracle_dboracle not found.
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /oracle/oracle/product/10.2.0/db_1/bin/emctl start dbconsole
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /oracle/oracle/product/10.2.0/db_1/cfgtoollogs/dbca/dboracle/emConfig.log for more details.
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:565)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:177)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:146)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
The first strange thing is the message "CONFIG: EM Configuration issue. /oracle/oracle/product/10.2.0/db_1/oracle_dboracle not found." that, I have checked, exists (and is a directory).
After this first message I get a finally ERROR message that states it's cannot able to start the dbconsole.
Where I have to point my attention?
This is a very first installation on a totally clean box.
Regards

The database has been successfully installed.
I get errors, sistematically, when I attempt to create a new db using dbca.
The error occurs during the last step of the db creation.
which follows is the dump of the relevant part of the emConfig.log where the error is enlisted:
Oct 31, 2006 12:37:24 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /oracle/oracle/product/10.2.0/db_1/bin/emctl start dbconsole
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 2
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: TZ set to Europe/Vatican
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: EM Configuration issue. /oracle/oracle/product/10.2.0/db_1/oracle.dev.nexus_dboracle not found.
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /oracle/oracle/product/10.2.0/db_1/bin/emctl start dbconsole
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /oracle/oracle/product/10.2.0/db_1/cfgtoollogs/dbca/dboracle/emConfig.log for more details.
Oct 31, 2006 12:37:27 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
     at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:565)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:177)
     at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:146)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
     at java.lang.Thread.run(Thread.java:534)

Error while installing oracle 11g in centos 5.3

I got this error while installing oracle 11g in my laptop with centos 5.3
the error is:
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 76430 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6000 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-07_12-09-48PM. Please wait ...[oracle@www database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
please help me solve this...i am new to linux so can anyone give me detailed instructions.i tried using the installation guide and even though i got this error...

Firstly Thank you everyone for giving me your suggestions.
I tried installing oracle 11g in centos using Tim's tutorial and i all went fine initially i got the oracle 11g installation GUI and i got an error while starting database configuration.
The error was : TNS failed
and i got two options in that dialog box "ignore" and "abort"
after press ignore a few times.the installation finished successfully.
When i opened terminal and typed
sqlplus SYS as SYSDBA
it asked for password
when i gave the password again it showed the error TNS failed
kindly help me solve this.....

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Install Oracle Enterprise Linux

We have an old workstation (Dell Precision WorkStation 530 with 2.40 GHz Intel Xeon processor, 2 GB RAM, and 3 36-GB hard dirves) and I would like to use it as a test box for Oracle on Linux. I tried to install Oracle Enterprise Linux, but it stuck at the some point every time, either during installing libraries/modules or formatting disk. The place the installation stuck varies. It does give any error message, but the installation just stops there fore hours or days. I tried Oracle Enterprise Linux 4 DVD, Oracle Enterprise Linux 5 DVD, and latest image CDs downloaded form metalink. All have the same issue. That installation starts as normal, then slow down, then freeze. I tried installing Fedora Core on the box using CDs from a Linux book yesterday, but it was successful and worked fine. I am wondering where there are some hardware incompatibility or other issues associated with the box. Any suggestions are greatly appreciated. Thanks.
George

Hi, George.
I think you'll have to determine the motherboard and other periferals in your machine to find out which one is incompatible with OEL. The most probable culprit is the motherboard. Find out which model it is and Google, using the model and the term "Enterprise Linux" (or RHEL or Centos, they are all the same).
There may be workarounds, if it's indeed an incompatibility issue: settings in the CMOS Setup or advanced parameters for booting the installation -- usually related to the drives (HD, DVD, SATA mode etc) or to P'n'P periferals (USB, for instance).
Regards,
Marcio

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Error with installing oracle on linux

Similar Messages

Maybe you are looking for