Error with new Creator install

I just installed Creator and durning the install it said there was an error and to look at the install.log. I looked at the install.log but can't seen to undstand where the error is. Here is the log below. Also in the log file for Creator there is a startup error.. This is below also. Is this error OK?
(Jan 25, 2006 4:23:46 AM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (coreFiles)
(Jan 25, 2006 4:25:36 AM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (bean3)
(Jan 25, 2006 4:25:45 AM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Install Application Server Action (bean4)
(Jan 25, 2006 4:25:45 AM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, Installing Sun Java Application Server Platform Edition 8...
Log Session: Wednesday, January 25, 2006 1:50:30 PM EST
System Info: Product Version = Java Studio Creator (Build 051104)
Operating System = Windows XP version 5.1 running on x86
Java; VM; Vendor = 1.4.2_06; Java HotSpot(TM) Client VM 1.4.2_06-b03; Sun Microsystems Inc.
Java Home = C:\Sun\Creator\java\jre
System Locale; Encod. = en_US; Cp1252
Home Dir; Current Dir = C:\Documents and Settings\Ed Taylor; C:\Sun\Creator\bin
IDE Install; User Dir = C:\Sun\Creator; C:\Documents and Settings\Ed Taylor\.Creator\1_0
CLASSPATH = C:\Sun\Creator\lib\ext\boot.jar;C:\Sun\Creator\lib\ext\ejb20.jar;C:\Sun\Creator\lib\ext\jgraph.jar;C:\Sun\Creator\lib\ext\naming.jar;C:\Sun\Creator\lib\ext\pbclient.jar;C:\Sun\Creator\lib\ext\pbtools.jar;C:\Sun\Creator\lib\ext\rowset.jar;C:\Sun\Creator\lib\ext\smbase.jar;C:\Sun\Creator\lib\ext\smdb2.jar;C:\Sun\Creator\lib\ext\sminformix.jar;C:\Sun\Creator\lib\ext\smoracle.jar;C:\Sun\Creator\lib\ext\smresource.jar;C:\Sun\Creator\lib\ext\smspy.jar;C:\Sun\Creator\lib\ext\smsqlserver.jar;C:\Sun\Creator\lib\ext\smsybase.jar;C:\Sun\Creator\lib\ext\smutil.jar;C:\Sun\Creator\lib\ext\sql.jar;C:\Sun\Creator\lib\ext\sqlx.jar;C:\Sun\Creator\lib\ext\locale\boot_ja.jar;C:\Sun\Creator\lib\ext\locale\boot_zh_CN.jar;C:\Sun\Creator\lib\ext\locale\naming_ja.jar;C:\Sun\Creator\lib\ext\locale\naming_zh_CN.jar;C:\Sun\Creator\lib\ext\locale\sqlx_ja.jar;C:\Sun\Creator\lib\ext\locale\sqlx_zh_CN.jar;C:\Sun\Creator\lib\ext\locale\sql_ja.jar;C:\Sun\Creator\lib\ext\locale\sql_zh_CN.jar;C:\Sun\Creator\java\lib\dt.jar;C:\Sun\Creator\java\lib\tools.jar
Boot & ext classpath = C:\Sun\Creator\java\jre\lib\rt.jar;C:\Sun\Creator\java\jre\lib\i18n.jar;C:\Sun\Creator\java\jre\lib\sunrsasign.jar;C:\Sun\Creator\java\jre\lib\jsse.jar;C:\Sun\Creator\java\jre\lib\jce.jar;C:\Sun\Creator\java\jre\lib\charsets.jar;C:\Sun\Creator\java\jre\classes;C:\Sun\Creator\java\jre\lib\ext\dnsns.jar;C:\Sun\Creator\java\jre\lib\ext\ldapsec.jar;C:\Sun\Creator\java\jre\lib\ext\localedata.jar;C:\Sun\Creator\java\jre\lib\ext\sunjce_provider.jar
Dynamic classpath = C:\Sun\Creator\lib\core.jar;C:\Sun\Creator\lib\openfile-cli.jar;C:\Sun\Creator\lib\openide-loaders.jar;C:\Sun\Creator\lib\openide.jar;C:\Sun\Creator\lib\ravelnf.jar;C:\Sun\Creator\lib\locale\core_ja.jar;C:\Sun\Creator\lib\locale\core_zh_CN.jar;C:\Sun\Creator\lib\locale\openide-loaders_ja.jar;C:\Sun\Creator\lib\locale\openide-loaders_zh_CN.jar;C:\Sun\Creator\lib\locale\openide_ja.jar;C:\Sun\Creator\lib\locale\openide_zh_CN.jar;C:\Sun\Creator\lib\locale\ravelnf_ja.jar;C:\Sun\Creator\lib\locale\ravelnf_zh_CN.jar
[org.netbeans.core.modules #4] Warning: the extension C:\Sun\Creator\modules\ext\sac.jar may be multiply loaded by modules: [C:\Sun\Creator\modules\css.jar, C:\Sun\Creator\modules\insync.jar]; see: http://www.netbeans.org/download/dev/javadoc/OpenAPIs/org/openide/doc-files/classpath.html#class-path
Turning on modules:
org.openide/1 [4.26.4 051104]
org.netbeans.api.xml/1 [1.3.1.3.6.2 3.6.2 051104]
org.openide.io [1.1.3 051104]
org.openide.execution [1.1.2 051104]
org.openide.loaders [4.11.3 051104]
org.netbeans.core/1 [1.21.3 051104]
org.netbeans.lib.terminalemulator [1.1.2 051104]
org.netbeans.core.output/1 [1.1.2 051104]
org.openide.compiler [1.2.2 051104]
org.netbeans.core.compiler/1 [1.4.2 051104]
org.netbeans.modules.javahelp/1 [2.1.3 051104]
org.netbeans.api.java/1 [1.3.2 051104]
org.netbeans.core.execution/1 [1.3.2 051104]
org.netbeans.libs.xerces/1 [1.4.2 2.6.0]
org.apache.tools.ant.module/3 [3.6.2 051104]
org.openide.src [1.1.2 051104]
org.openide.debugger [1.1.3 051104]
org.netbeans.modules.j2eeapis/1 [1.1 051104]
org.netbeans.modules.settings/1 [1.4.2 051104]
org.netbeans.modules.schema2beans/1 [1.7.2 051104]
org.netbeans.modules.debugger.core/3 [2.10.3 051104]
org.netbeans.libs.j2eeeditor/1 [1.1.2 051104]
org.netbeans.modules.j2eeserver/3 [1.1.5 051104]
org.netbeans.modules.editor/1 [1.14.6 051104]
org.netbeans.modules.debugger.jpda/1 [1.17.3 051104]
org.netbeans.api.web.dd/1 [1.1.2 1.1 051104]
com.sun.rave.project/1 [1.0.5 051104]
com.sun.rave.libs.jsf/1 [1.0.6 051104]
com.sun.rave.jsfsupport/1 [1.0.5 051104]
com.sun.rave.insync/1 [1.0.6 051104]
org.netbeans.modules.diff/1 [1.7.2 051104]
com.sun.rave.jsfmetadata/1 [1.0.5 051104]
com.sun.rave.toolbox/1 [1.0.4 051104]
org.netbeans.modules.classfile/1 [1.9 051104]
org.netbeans.modules.java/1 [1.16.4 051104]
com.sun.rave.designer/1 [1.0.7 051104]
com.sun.rave.navigation/1 [1.0.5 051104]
org.netbeans.modules.xml.core/2 [1.1.1.3.6.2 3.6.2 051104]
org.netbeans.modules.xml.catalog/2 [1.1.1.3.6.2 3.6.2 051104]
org.netbeans.modules.text/1 [1.12.3 051104]
com.sun.rave.layoutmgr/1 [1.2 051104]
org.netbeans.core.ide/1 [1.3.2 051104]
com.sun.rave.welcome/1 [1.0.3 051104]
com.sun.rave.preview.support/1 [1.2 051104]
com.sun.enterprise.webserver.tools/2 [2.0 051104]
org.netbeans.modules.autoupdate/1 [2.8.6 051104]
com.sun.rave.raveupdate/1 [1.0.3 051104]
org.openidex.util/2 [2.7.2 051104]
org.netbeans.modules.html/1 [1.12.5 051104]
com.sun.rave.errorhandler.server/1 [0.2 051104]
org.netbeans.modules.xml.text/2 [1.1.1.3.6.2 3.6.2 051104]
org.netbeans.modules.schema2beansdev/1 [1.1.2 051104]
com.sun.rave.jwsdpsupport/1 [1.1 051104]
com.sun.rave.ravehelp/1 [1.0.3 051104]
com.sun.rave.sam/1 [1.0.4 051104]
org.netbeans.modules.extbrowser/1 [1.3.3 051104]
com.sun.rave.servernav/1 [1.1 051104]
com.sun.rave.dataconnectivity/1 [1.0.4 051104]
org.netbeans.modules.beans/1 [1.11.3 051104]
com.sun.tools.appserver/1 [2.0.3 20051104-1014]
com.sun.rave.ejb/1 [0.2 051104]
org.netbeans.modules.css/2 [1.1.1.3.6.2 3.6.2 051104]
org.netbeans.core.ui/1 [1.3.3 051104]
org.netbeans.modules.utilities/1 [1.15.2 051104]
org.netbeans.modules.servletapi24/1 [2.0.3 2.0.3 051104]
org.netbeans.modules.properties/1 [1.11.3 051104]
org.netbeans.modules.web.jspparser/2 [2.0.3 051104]
org.netbeans.modules.web.core.syntax/1 [1.13.3 051104]
com.sun.rave.jspsyntaxint/1 [1.1 051104]
com.sun.rave.plaf/1 [1.1 051104]
org.netbeans.modules.image/1 [1.11.2 051104]
com.sun.rave.windowmgr/1 [1.2 051104]
org.netbeans.modules.clazz/1 [1.13.2 051104]
org.netbeans.modules.properties.syntax/1 [1.12 051104]
com.sun.rave.websvc/1 [1.0.6 051104]

Marc, thanks fort your reply. The only reason I tried the older JCreator, and not the newer version, is because of system requirements. I do not have the required memory. So, after your response I said what the heck. I downloaded and tried to install the newer version. It started to install and hung at 29% processed on the progress bar. That's all she wrote. The prior JCreator at least installed it's developer IDE before it tried to install the AS. I guess the order of the install for the newer JCreator's is different. If you have read this thread you will see that I have tried for last year or so off and on to install the Application Server with no success. I have in the pass taken down MS's firewall but did not get any further. I forgot to do it this time. Maybe I should try one more time. I mean I do have GlassFish running . If JCreator supported that server I would not be worried about the AS.
I have no technical angle to define my problem. It just hangs. The old Watcom suite had at least debuggers so I could see where the hang is. The module..etc. Here I feel like a stupid user with a 'user friendly' install that does not work on my machine. frrustrating when I have three other servers installed and running on my machine. I specified my machine config in a prior response.

Similar Messages

  • 50.5 Fuser Error with new fuser installed

    Our HP Color LazerJet CP6015 Printer stopped working because of a "50.5 Fuser Error". We ordering and installing a new Image Fuser Kit (220v) but it still shows the same error message. Anyone have any ideas how to fix the problem?

    Hi,
    You might have more luck on the bussines forum, this is the consumer forum and your unit is considered a bussiness unit, so the bussiness forum might be a place where you get a better answer.
    Find it with the link below.
    http://h30499.www3.hp.com/
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • EYETV LITE WILL NOT STARTUP WITH NEW MAVERICK INSTALL

    eye lite will not start up with new maverick installed untill you unpluge usb then reinstall.

    Well, I download the driver for Windows 8.1 64 bit, it appears to down load then says extracting and the bar goes along to 100% then nothing. There is no option to install the printer wirelessly, the printer does not appear in the devices and printers, the Scan Doctor tries to fix the problem and just says need to install the wireless facility by using the manual when I select the wireless option. As I said, I can plug in USB and use printer fine but what is the point of having wireless if it doesn't work? Printer worked fine when installed on Home Hub 2. Got a new lap top and still  no problems. Problems started when had to have new Home Hub as the broadband connection kept dropping out. BT sent HH3 as don't do HH2 any more. Realised that the printer was still holding the details of the old hub but couldn't find a way of changing this. Reset printer to factory wireless settings so not holding these now. Cannot use CD to load printer as doen't work with Windows 8.

  • Just bought pro with new os installed - will not let me run install disk for lexmark printer

    just bought pro with new os installed - will not let me run install disk for lexmark printer?

    Is that disc for Mac systems or Windows ?
    I suggest you visit Lexmark web site and download and install drivers for your exact printer manually.

  • Have a late 2006 iMac with new Ram installed in late 2011 . I am currently running Mountain lion. Did/ hit something while half asleep and was asked for my recovery password didn't know it.Not sure what i did after that but wont boot just searches,

    I have a late 2006 iMac with new Ram installed in late 2011or early2012 . I am currently running lion. Did/ hit something while half asleep and was asked for my recovery password, I didn't know it & not sure what I did after that but it wont boot up just searches with a light grey whit -ish screen. Cant get it to clear. Any advice?
    Charlies Secret Angel-

    Try to boot in Safe mode, see if you are able: Hold down shift and then power on. For wireless keyboards, hold down shift after the chime.
    Safe Boot
    Resolve startup issues and perform disk maintenance with Disk

  • Error with OCI8 driver installing sendmail/javamail

    Hi to All,
    From Dos window I run the command:
    loadjava -user sys/pwd@name_db -resolve -synonym activation.jar
    This is the first step in order to install a Sendmail package based on javamail, but I have this error:
    =============================
    Java.exe error
    Impossible to find the enterpoint kpufhndl0 of procedure in the library of dynamic link OCI.dll (Sorry, this is a translation of italian language)
    OK
    =============================
    After I click on OK and this is the next response:
    Error while connecting with OCI8 driver to namedb:oracle.aurora.server.tools.loadjava.ToolsException: The JDBC OCI8 Driver is not installed properly, use -thin to try the JDBC Thin Driver: C:\oracle\product\10.2.0\oradb10g\BIN\ocijdbc10.dll: Impossible to find the specified procedure.
    exiting: could not open connection
    After, I have used the command:
    loadjava -thin C:\oracle\product\10.2.0\oradb10g\BIN\ocijdbc10.dll
    This is the result:
    SQL error while connecting with driver to default database: Listener refused the connection with the following error:
    ORA-12505, TNS: listener does not currently know of SID given in connect descriptor
    The connection descriptor used by the client was:
    localhost:1521: orcl
    exiting: could not open connection
    But the connection descriptor that I use is eg COSFI, not orcl.
    Other applications works fine with my descriptor.
    Someone can help me in order to resolve this problem ?
    Thank You and Best Regards.
    Gaetano
    Message was edited by:
    NICK048

    Gaetano,
    I see you took my advice when I replied to your Error with OCI8 driver installing sendmail/javamail.
    However, it doesn't look like you studied the Oracle documentation for loadjava because the command you posted doesn't look right at all.
    Please refer to the Java Developer's Guide for the correct syntax and usage of the loadjava command.
    Good Luck,
    Avi.

  • B2 Error with new MSI GTX 970 :(

    Hi there team!
    Just registered to try and get help. I spent around 6 hours researching + trying all the suggestions throughout many different forums, but the B2 error still persists. I am currently running the following spec:
    Mobo - MSI Z68A-G43 (G3), with version 4.30 ( I flashed bios last night and still no help)
    CPU - Intel® Core™ i5-2500K Processor, 3.5GHz etc.etc.
    RAM - Corsair Vengeance 2x4gb at 1333MHz
    GPU - MSI GTX 970 GAMING Twin Frozr V 4GB GDDR5
    PSU - Cooler Master Silent Pro 700W
    I have tried:
    -Taking out the card and using the on-board graphics to flash the bios to later version, No help. (during this process, the B2 error does NOT show up)
    -Upgraded the card to latest nVidia drivers, even uninstalled and re-installed them. No help.
    -Upgraded all the drivers from MSI, i.e. chipset etc. through Live Update 6. No help.
    When the card is in, I cannot even access bios, it just gets stuck at B2 screen for like a minute, and then carries on with the boot process. I am able to play games etc. after the booting, but this error for sure should not be there when the PC boots up. I didn't have any issues with my old GTX 560 TI. I've read different forums saying that it might have something to do with the mobo thinking that something has to be connected to the on-board graphics; or that flashing BIOS helped a lot of users, but not me :(.
    I don't have a second PC to test the card on.
    Literally, I would try anything, please someone just help :(( This card is a beast and I wanna be able to properly use it and not having to worry about this error.
    Thank you very much guys, hope someone can help!

    Quote from: gabe_dimitrov on 08-February-15, 20:40:51
    Man thank you so much! It is finally working!!! Thank you!!!! ))) It is showing correct version in BIOS, does not show B2 error whatsoever, all done! )
    Thanks for your time! You can close thread, but it's very useful for anyone that has this issue!
    Wich version of BIOS do you have installed? Can you OC your processor with new BIOS?

  • APPLE Macbook error 2869 ¿error with new MAC OS X Leopard?

    ENGLISH
    In the new aluminium Mackbook, when installing the drivers from disk MAC OS X for windows XP SP2, it always appears error 2869.
    This error is unknown at Support service of APPLE 900 150 503 and also in every cities in Spain, and England, they don’t know what it is.
    It seems to be that the partition doesn’t admit FAT 32 and for doing format NFTS from parallels we wouldn’t be able to edit windows files.
    In a nutshell it is a chaos that APPLE cant support and either repair it; I still thinking that this things are why the market Share is of only 5%, even if they are trying to getting along with Microsoft
    ¿Does anyone have a better opinion about this? ¿could you help me?, even better, ¿could anyone help the futures unsuspecting people that buys a MAC to avoid having something that is incompatible?
    thank you
    SPANISH:
    En el nuevo Macbook alumnio, instalando los drivers del disco Mac OS X para el windows XP SP2 aparece siempre el error 2869.
    El motivo es desconocido en servicio técnico central de Apple 900 150 503 y también en Sevilla, Málaga y Madrid, no saben qué puede ser.
    Parece ser que la partición ya no la admite en FAT 32 y de hacerla en formato NFTS desde el parallel no podría editar ficheros windows.
    En fin, un caos que Apple no ha resuelto; sigo pensando que éstas son las cosas por las que su cuota de mercado es de sólo un 5% , a pesar de intentar compatibilizarse con Microsoft.
    ¿Alguién tiene mejor opinión sobre este asunto? ¿ me puede ayudar? , Mejor aún, ¿puede alguien ayudar a los futuros incautos que compren un Mac para evitar tener algo que dice es compatible y en realidad no lo es?.
    gracias
    Message was edited by: alvaro949494
    Message was edited by: alvaro949494
    <Edited by Moderator>

    Dear Doug,
    Thank you for your post.
    Here you have the answers you ask:
    1.- ...error is appearing. Mac OS X?
    Yes that error appears just when installing the drivers required from Mac OS X 10.5 Leopard.
    2.-......when you're running Windows?
    No, windows runs ok. I insist that the error message appears when installing drivers required form Mac OS X 10.5 Leopard.
    3.-...contact support yet?
    Yes, on Spanish Central support Tph:(+34) 900 150 503 (from Spain), Local support ( UK ....Madrid, Seville, Malaga...Spain).
    4.-... Are you using parallels?
    No.
    5.-....Apple's Boot Camp?
    Yes.
    This is my advise, from my dissapointed experience, for MAC newbies and experienced users, "from user-to-user" , when I tried to run my Windows XP in a New Macbook, using boot camp, IT was - is INCOMPATIBLE, and Apple Support doesn't gave me a solution yet!!!!!
    Time consuming !!!!
    money wasted !!!!
    likewise..Thank you Doug

  • How old data file replace with new 10g installed datafile

    Sir
    I my 10g is corrupt
    I copy all 10g folder in other my usb and install new 10g with same name
    I want to use all old user and data from usb
    Please give me which folder or datafile change with new file
    Old 10g database file mfa10g
    New 10g database file mfa10g
    How use old data and user
    Please give me step by step detail
    Thank you

    Before I attempt to answer,answer the following questions
    1)Which o/s you are working upon?
    2)When you say files are corrupted,which files are corrupted,database files or software files?
    3)Which files you have copied?Your oracle database files ?
    For the last part,
    Please give me which folder or datafile change with new file
    Old 10g database file mfa10g
    New 10g database file mfa10g
    You can't just put one file from somewhere and "plug-in" with your database.Either you have to recover that file which has another complications or you have to restore the entire old database.
    Answer the questions that I have just asked.This will help for a better answer .
    Aman....

  • Still getting Javascript error with new version of UIX

    I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
    Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
    It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
    It's working fine with old version.
    We had used proper cabo directory. These files are in sync with the version of the runtime
    Here is our finding
    I found a error in _updateFormActions() function from MarlinCoreb2.js file.
    In this function it is giving error at
    if(a8!=a6)
    a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
    working properly without any javascript error.
    This problem is a bit tricky....
    Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
    and it also works on the Mozilla Firefox browser.
    Can any one advice on the same?
    Thanks in advance
    Anindya

    I answered this question on a different thread.
    Do NOT post the same question multiple times. If you require more complete or prompt assistance than you receive on these forums, contact Oracle Support.
    -brian

  • Javascript error with new UIX framework

    Hi,
    I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
    Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
    It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
    It's working fine with old version.
    Any help is much appreciated.
    Thanks and Regards,
    Anindya

    Thanks Brian for your prompt reply
    We had used proper cabo directory. To confirm it we have done it once again.But we're still getting the same error.
    here is our finding
    I found a error in _updateFormActions() function from MarlinCoreb2.js file. 
    In this function it is giving error at
    if(a8!=a6)
    a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
    working properly without any javascript error.
    This problem is a bit tricky....
    Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
    and it also works on the Mozilla Firefox browser.
    can you please advice is there any solution
    Thanks in advance
    Anindya

  • Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

    I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine.  I have only built the machine, and tried to load the Drivers.
    I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD.  I identified that the Bluetooth driver was the issue.  I then did not load the Bluetooth
    drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os.  (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
    I have not received a single Update either.  The Auto update feature claims that I am up to date.  I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
    Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain.  Also the results of the sfc /scannow are copied below.
    My Questions
    I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom.  Will you take a look??
    Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
    Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
    Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
    drivers work. (including the blue tooth)
    The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
    Errors and Results.
    There are also a number of logs that show various Crit, Error, and Warning logs.  I will include those if need be.
    This is the majority of the error messages, and I have missed the opportunity to capture others.
    Internet explorer encountered Validation errors:
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : comctl32.dl
    iii.     
    Assert offset: 00133A2A
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 008BE823
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0040F9E8
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : iertutil.dll
    iii.     
    Assert offset: 001DEC51
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 00014159
    Validation Error
    i.     
    Process Name: iexplorer.exe
    ii.     
    Module Name : mshtml.dll
    iii.     
    Assert offset: 0000000000B221DB
    Microsoft Management Console Encountered a Validation Error
    Validation Error
    i.     
    Process Name: mmc.exe
    ii.     
    Module Name : ieframe.dll
    iii.     
    Assert offset: 00000000006C9283
    Scripted Diagnostics Native Hot encountered a Validation Error
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : urlmon.dll
    iii.     
    Assert offset: 00000000001A0A73
    Validation Error
    i.     
    Process Name: sdiagnhost.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017f32
    Windows System Assessment Tool encountered a validation error
    Validation Error
    i.     
    Process Name: winsat.exe
    ii.     
    Module Name : KERNELBASE.dll
    iii.     
    Assert offset: 0000000000017F32
    Windows Explorer Encountered a validation Error
    Validation Error
    i.     
    Process Name: Explored.exe
    ii.     
    Module Name : thumbcache.dll
    iii.     
    Assert offset: 00000000000300BE
    AI Suite 2 encountered a validation error
    Validation Error
    i.     
    Process Name: AI Suite 2.exe
    ii.     
    Module Name : ntdll.dll
    iii.     
    Assert offset: 000686BD
    the number “2” is the substitutedfor the roman numeral 2
    I believe that this is part of the MB Suite.
    My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download.  Activated on 8-12-2012
    Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
    Chip Set: bx80619i73930k
    2x Memory: cmx16gx3m2a1600c11 Corsair
    Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
    Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
    Generic optic drive: SH-222bb/bebe Samsung
    Here is the Microsoft Fix It error code
    Assertion Failed!
    Program:…
    File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
    Line: 2131
    Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
    For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
    (Press Retry to debug the application – JIT must be enabled)
                    Abort    Retry     Ignore
    Abort
    Closes the program
    Retry
    Repeats the error
    Verbatim
    Ignore
    Closes the program
    Nothing happens
    Here is the Microsoft Genuine Advantage Diagnostic Report
    Diagnostic Report (1.9.0027.0):
    Windows Validation Data-->
    Validation Code: 0
    Cached Online Validation Code: N/A, hr = 0xc004f012
    Windows Product Key: *****-*****-*****-*****-8C7YB
    Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
    Windows Product ID: 55041-146-2397786-86942
    Windows Product ID Type: 6
    Windows License Type: Volume MAK
    Windows OS version: 6.1.7601.2.00010100.1.0.004
    ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
    Is Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/A, hr = 0x80070002
    Signed By: N/A, hr = 0x80070002
    Product Name: Windows 7 Enterprise
    Architecture: 0x00000009
    Build lab: 7601.win7sp1_rtm.101119-1850
    TTS Error:
    Validation Diagnostic:
    Resolution Status: N/A
    Vista WgaER Data-->
    ThreatID(s): N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    Windows XP Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    File Exists: No
    Version: N/A, hr = 0x80070002
    WgaTray.exe Signed By: N/A, hr = 0x80070002
    WgaLogon.dll Signed By: N/A, hr = 0x80070002
    OGA Notifications Data-->
    Cached Result: N/A, hr = 0x80070002
    Version: N/A, hr = 0x80070002
    OGAExec.exe Signed By: N/A, hr = 0x80070002
    OGAAddin.dll Signed By: N/A, hr = 0x80070002
    OGA Data-->
    Office Status: 109 N/A
    OGA Version: N/A, 0x80070002
    Signed By: N/A, hr = 0x80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
    Browser Data-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
    Download signed ActiveX controls: Prompt
    Download unsigned ActiveX controls: Disabled
    Run ActiveX controls and plug-ins: Allowed
    Initialize and script ActiveX controls not marked as safe: Disabled
    Allow scripting of Internet Explorer Webbrowser control: Disabled
    Active scripting: Allowed
    Script ActiveX controls marked as safe for scripting: Allowed
    File Scan Data-->
    File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
    File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
    Other data-->
    Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
    manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
    Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults> 
    Spsys.log Content: 0x80070002
    Licensing Data-->
    Software licensing service version: 6.1.7601.17514
    Name: Windows(R) 7, Enterprise edition
    Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
    Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
    Installation ID: 000792957432055771547065313840421702569731971164600080
    Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial Product Key: 8C7YB
    License Status: Licensed
    Remaining Windows rearm count: 5
    Trusted time: 8/12/2012 5:47:25 PM
    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: N/A
    HealthStatus: 0x0000000000000000
    Event Time Stamp: N/A
    ActiveX: Not Registered - 0x80040154
    Admin Service: Not Registered - 0x80040154
    HealthStatus Bitmask Output:
    HWID Data-->
    HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
    OEM Activation 1.0 Data-->
    N/A
    OEM Activation 2.0 Data-->
    BIOS valid for OA 2.0: yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID Consistent: N/A
    BIOS Information:
      ACPI Table Name           OEMID Value     OEMTableID Value
      APIC                                    ALASKA                               
    A M I
      FACP                                   ALASKA                               
    A M I
      HPET                                    ALASKA                               
    A M I
      MCFG                                 ALASKA                               
    OEMMCFG.
      SSDT                                    AMICPU                              
    PROC
    Scan Now Results
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>sfc /scannow
    Beginning system scan.  This process will take some time.
    Beginning verification phase of system scan.
    Verification 100% complete.
    Windows Resource Protection did not find any integrity violations.
    C:\Windows\system32>

    Thank you for your valuable time.
    I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
    The Memory Tool did not find anything amiss.
    As per another thread I am going to try flashing the bios as well with the updates.
    Following are the Chkdsk results.
    Are there any other suggestions?
    Chkdsk Results
    Checking file system on C:
    The type of the file system is NTFS.
    A disk check has been scheduled.
    Windows will now check the disk.                        
    CHKDSK is verifying files (stage 1 of 5)...
      89600 file records processed.                               
              File verification completed.
      221 large file records processed.                                     
    0 bad file records processed.                                       
    1596 EA records processed.                                             
    44 reparse records processed.                                      
    CHKDSK is verifying indexes (stage 2 of 5)...
      131874 index entries processed.                                        
    Index verification completed.
      0 unindexed files scanned.                                           0
    unindexed files recovered.                                       CHKDSK
    is verifying security descriptors (stage 3 of 5)...
      89600 file SDs/SIDs processed.                                        
    Cleaning up 36 unused index entries from index $SII of file 0x9.
    Cleaning up 36 unused index entries from index $SDH of file 0x9.
    Cleaning up 36 unused security descriptors.
    Security descriptor verification completed.
      21138 data files processed.                                           
    CHKDSK is verifying Usn Journal...
      36120296 USN bytes processed.                                            
    Usn Journal verification completed.
    CHKDSK is verifying file data (stage 4 of 5)...
      89584 files processed.                                                
    File data verification completed.
    CHKDSK is verifying free space (stage 5 of 5)...
      476262075 free clusters processed.                                        
    Free space verification is complete.
    Windows has checked the file system and found no problems.
    1953410047 KB total disk space.
      48065140 KB in 61610 files.
         43468 KB in 21139 indexes.
             0 KB in bad sectors.
        253139 KB in use by the system.
         65536 KB occupied by the log file.
    1905048300 KB available on disk.
          4096 bytes in each allocation unit.
     488352511 total allocation units on disk.
     476262075 allocation units available on disk.
    Internal Info:
    00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00  .^...B..........
    e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00  ....,...........
    6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00  m.u.i...........
    Windows has finished checking your disk.
    Please wait while your computer restarts.

  • SQL Server 2012 Management Studio Displays Error With "New Query" and Intellisense Works Intermittenly

    I was upgrade to SQL Server 2012 and Visual Studio 2010 was upgraded with SP1 the same day.  This is x64 machine. 
    Microsoft SQL Server Management Studio      11.0.2100.60
    Microsoft .NET Framework      4.0.30319.261
    Operating System      6.1.7601
    Problem 1) With SQL Server Management Studio, selecting "New Query" a warning box is displayed: "The 'Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010Package, Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010,
    Version=1.0.0.0, Culture=netutral, PublicKeyToken=null' package did not load correctly.    The problem mayhave been cuased by a configuration change or by the installation of another extension.  You can get more information by running the
    application together with the /log parameter on the command line, and then examining the file ...\AppDate\Roaming\Microsoft\AppEnv\10.0\ActivityLog.xml'.  Continue to show this error message?
    Problem 2) In a Query Initellisense works intermittently but most of the time it will not display anything.  I have tried Edit|Intellisense|Refresh Cach size and also seperately, Edit | Intellisense | List Members but neither has helped.  Also
    tried different selections for Tools|options| T-SQL | Intellisense| Maximum Script Size; no luck either. 

    Hi WallyJim,
    For your first problem, possible workaround:
    In Programs and Features (or Add/Remove Programs), right click the Microsoft Enterprise Library 5.0 Optional Update 1 program and select change. Remove the VisualStudio2010 integration.
    Then, install the EnterpriseLibrary Configuration extension from Microsoft via the Extension Manager in VS2010. This will allow you to launch the configuration editor from VS2010, but will not be installed for SSMS.
    For more information, please refer to
    https://connect.microsoft.com/SQLServer/feedback/details/620532/error-message-on-new-query-window-opening.
    For your second problem, the following conditions might affect the behavior of IntelliSense:
    There is a code error above the cursor.
    The insertion point is inside a code comment.
    The insertion point is inside a string literal.
    The automatic options are turned off.
    For more information, refer to Troubleshooting IntelliSense (SQL Server Management Studio):
    http://msdn.microsoft.com/en-us/library/ms173434.aspx.
    Thanks,
    Maggie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

  • Error with DQS after Installing SQL Server Service Pack 2

    When I open the DQS client, I get this error message:
    Message Id: VerificationFrameworkVersionNotCompatible
    A new version of .NET or Data Quality Services was installed on this machine. In order to continue to work with DQS please run 'DqsInstaller.exe -upgrade'.
    However, when I run DQSInstaller.exe, I get this message:
    DQS Installer has detected a previous DQS installation under this SQL server instance.  Running DQS installer will remove the previous installation, together with all the knowledge stored in it.
    Will I lose all my knowledge bases?  Is there an upgrade path?

    Hi Adolfo Socorro,
    According to your description, when you install SQL Server 2012 Service Pack2, the error of
    Data Quality Services (DQS) will occur. The cause is that Product Updates will not update the schema of the DQS catalogs, any related MDS catalogs, and the SQL CLR assemblies kept the DQS catalogs. Therefore, extra steps may be required
    if the DQS catalog schema needs to be upgraded, or the DQS CLR assemblies have been upgraded by the product update.
    If you have previously run the DQSInstaller.exe to build the DQS_MAIN, DQS_PROJECTS, and DQS_Staging_Data catalogs in one or more of the updated instances, you
    may need to continue to do the necessary upgrade steps to upgrade the database schemas, such as launch CMD as Administrator
    cd "C:\Program Files\Microsoft SQL Server\MSSQL11.InstanceName\MSSQL\Binn" DQSInstaller.exe –upgrade
    There is an article about upgrading DQS, you can review the following article.
    http://social.technet.microsoft.com/wiki/contents/articles/8442.upgrade-dqs-installing-cumulative-updates-or-hotfix-patches-on-data-quality-services.aspx
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Odd error with MS Office Install and transforms

    Hello,
    I'm seeing this on our new Dell PCs that we are delivering to our staff. We create the image, test it, and it works fine. We then deliver the PCs to the user, user logs in, Windows creates profile, etc, but MS Office (2002) won't run - for that user. If I use the account we use for imaging, this we Word, Excel, PowerPoint work normally. For newly profile users, we see the error message:
    "Microsoft Word [or Excel or Powerpoint] has not been installed for the current user. Please run setup to install the application."
    This makes no sense to me. If we install again, it works for that user, but not other users.
    I did find an MS KB article that says we have to uninstall/reinstall MS Office - any other thing that it could be? Installing/reinstalling seems to be just a patch.
    I recreated the transforms file to specifically state ALLUSERS=2, so it will force all users who log into the PC to be allowed to use the apps, but it's not working. My app points to the transform file, Office installs, but 1) I still get the above error and 2) Outlook installs, even though I instruct the transform to not install it.
    Suggestions?
    Thanks
    Tom Miller
    Hampton Newport News Community Services Board
    Engineer, Information Technology
    757-788-0528

    Okay, thanks. What's really annoying is that I've never had an issue with this until we got our new Dell models in - so it could be that our my image is somehow damaged. Time to recreate...
    >>> Rolf Lidvall<[email protected]> 1/29/2007 10:36 AM >>>
    > The documents doesn't state anything,
    > unless I leave it at 2 and it forces a per-machine install.
    I disagree. It states:
    "If ALLUSERS=2, the installer always resets the ALLUSERS
    property to null or 1 based on whether it determines to do a
    per-user or a per-machine installation."
    The only reason to use ALLUSERS=2 would be if you explicit
    wanted the Installer to always evaluate which kind of install it
    should do.
    Assuring a per-machine install, which I understand is your aim,
    specify ALLUSERS=1.
    Regards
    Rolf Lidvall
    Swedish Radio (Ltd)

Maybe you are looking for

  • Does any iPhone work with map messaging?

    II'm using my iPhone 3GS In my ford vehicle with the sync system. My phone doesn't support MAP, so I can't take advantage of the text messaging features. Are there any apps to remedy this, or maybe a newer iPhone that supports MAP?

  • IPhoto 11 lag when in full screen mood?

    When I open my iPhoto 11 in full screen size, and start scrolling down the event it lag. However, when I scroll down the event when not in full screen, there is no lag. Is it normal or are there bugs? Help me please Thanks.

  • Zen Sleek Photo, wont conn

    Well, I first updated the firmware becuase it had start up problems, so after that it worked fine. A few days after, I wanted to add some new songs, but it wouldn't connect.. I have tried it on all the computers in the house-3 of them, 2 desktops, la

  • New GL , PCA

    Hi All I have activated new GL and I have activated the profit center update. I saw classic GLPCT and GLPCA tables are getting updated even after activating New GL and ....Is that Normal? seperate profit center document is also getting created ....Is

  • Table Statistics failed during Import

    Hi All, I am trying to import an existing schema in Oracle 10g. I am using the impdp utility. The export dump consists of the complete schema (metadata and data). But it failed with the following logs. Processing object type SCHEMA_EXPORT/TABLE/STATI