Error with Save_Text

Hi All,
I am getting following error while saving text. Can someone please help me.
Thanks,
Veni.
I/O error for text VBBK Period Start 0021 EN
Diagnosis
You want to read a text from the database, delete it, or save it to the database.
System Response
An error occurred when the database was accessed.
Procedure
Try repeating the procedure. If the error recurs, contact your system administrator.
  WHEN 'E1EDK03'.
    ZXVBAK = DXVBAK.
    MOVE SEGMENT-SDATA TO E1EDK03.
    IF E1EDK03-IDDAT = '004'.
      WRITE E1EDK03-DATUM TO PSDATE.
      CLEAR: wa_thead, itline.
      REFRESH: itline.
      wa_thead-tdname = 'Period Start'.
      wa_thead-tdobject = 'VBBK'.
      wa_thead-tdid = '0021'.
      wa_thead-tdspras = sy-langu.
      itline-tdformat = '*'.
      itline-tdline = PSDATE.
      APPEND itline.
      CALL FUNCTION 'SAVE_TEXT'
        EXPORTING
          client          = sy-mandt
          header          = wa_thead
          insert          = 'X'
          savemode_direct = 'X'
        TABLES
          lines           = itline.

Hi,
Use the Two FM's in Sync:
CALL FUNCTION 'INIT_TEXT'
       EXPORTING
            ID       = 'ST'
            LANGUAGE = sy-langu
            NAME     = TEXTHEAD-TDNAME
            OBJECT   = 'TEXT'
       IMPORTING
            HEADER   = TEXTHEAD
       TABLES
            LINES    = TEXTTAB
       EXCEPTIONS
            OTHERS   = 5.
  CALL FUNCTION 'SAVE_TEXT'
       EXPORTING
            CLIENT          = SY-MANDT
            HEADER          = TEXTHEAD
            SAVEMODE_DIRECT = 'X'
       TABLES
            LINES           = TEXTTAB
       EXCEPTIONS
            OTHERS          = 5.
ENDFORM

Similar Messages

  • RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

    HelloThank's for your helpsI hope this document is helpfulBest Regards,
    Date: Sun, 22 Jun 2014 17:10:17 -0700
    From: [email protected]
    To: [email protected]
    Subject:  when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
        when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
        created by Anoop9178 in Adobe Reader - View the full discussion
    Hi,
    Would it be possible for you to share the document?
    Regards,
    Anoop
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
         To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

    thank's for reply and your help
    i did the step's that you told me but  i still have the same problem
                                     i have the latest v.11.0.7
    i
    i disable the protected mode

  • Odd Error with decode function in Order By Clause

    I am trying to compile a procedure and can't get around an error with a dynamic order by that doesn't make much sense to me. I can repoduce the error with a plain select statment in sql plus so I can rule out a declaration error. Here is an example with 2 numeric columns and a date column.
    select task_id, display_date, remark_id from task_list
    where task_id > 1000
    order by decode('Task_ID', 'Task_ID',Task_ID, 'Display_Date', Display_Date, 'Remark_ID',Remark_ID)
    returns the error:
    select task_id, display_date, remark_id from task_list
    ERROR at line 1:
    ORA-00932: inconsistent datatypes: expected NUMBER got DATE
    I'm not sure why this error is occuring, because it doesn't even hit the Display_Date field in the Decode statment. If I take the Display_date out of the statement, it runs properly. If I change Display_Date to To_Char(Display_Date) it also runs fine, but the sorting is incorrect. Also I'm running 9.2, and do not want to use dynamic sql to build my query. Any Ideas out there as to the cause of this error?

    I did find a workaround to this issue by breaking the decode statment into three separate statement, but I still think that the way it is written above should work, and may be a bug, or an error that I don't understand fully.
    The Order by was rewritten like this:
    order by decode(pSort, 'Task_ID',Task_ID), decode(pSort, 'Display_Date', Display_Date),
    decode(pSort, 'Remark_ID',Remark_ID);
    Thanks

  • XML Publisher Error with reports published in XML publisher

    Hi All,
    I am geting the following error with a report published using XML Publisher
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    The system cannot locate the resource specified. Error processing resource 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.d...
    How can i Rectify this?

    Hi Ark,
    In order to generate a report using xml publisher. we need the following.
    1. XML Data
    2. Template file (RTF/PDF/..)
    XML data will not be created by the template file.
    We will be required to create XML data. One of the easiest way to create xml output is using the RDF. We can change the rdf output type in the concurrent program to XML.
    Once the xml and the template is available, "XML Report Publisher" will be able to generate the output in the required format.
    Thanks,
    K.Nataraja Suthan,

  • Graphic problems/errors with Mainstage 3 and MBP (15'' 2011)

    Hi,
    I bought Mainstage 3 for my MBP (15'' 2011).
    When i click con "perform" i get graphic errors.
    I have the same issue with the old Mainstage version since Mountain Lion.
    Also a fresh installation didn't help.
    I think i'm not the only one with this issue!
    I don't know how to report a bug?
    Perhaps someone can help me.
    (and  I'm probably not the only one (see feedback in Apple Store) If you also have this problem, please add a comment with your configuration (Hardware, Software))
    /forgotten ebi
    So, here an example how it looks like when i click on "perform":

    Same configuration,same problem. BUT I found a workaround.
    Mainstage has this error with the AMD video card and/or a second monitor connected.
    With a little app (http://gfx.io)  it's possible to really force the MBPro to use the Intel Graphics card.
    This will work only with the internal screen, not with a second screen connected.
    And sometimes you need to restart, to really make the Intel video card free.
    This works fine...In the meantime of a fix.

  • Error with an infoset in BI

    HI BI gurus,
    we have a problem with an infoset.
    We create an infoset in RSA1 linked to a cube and a DSO.
    We activate it in english without problems and I can create a query with no errors (with a english logon).
    If I try to create a query in italian language the query designer show mw this error: " unexpected error - RCF_SYSTEM_FAILURE. You must restart the query designer."
    Do you have any idea how to fix and solve this problem? We try to activete the infoset in Italian but the error remains.
    Thanks for any help.
    SB

    Hi,
    is italien installed as a language in your system?
    Siggi

  • I am trying to download my photos from my iphone to my mac-iphoto. It keeps trying but about halfway through it says there is an error with a photo therefore it wont download any of my pictures or videos.  It wont tell me which picture is the issue.

    I took a lot of pictures and video on my recent trip to Ireland.  Now I am trying to download the photos and videos from my iphone to my mac - iphoto.  I have tried 3 times and each time (at a different point) I get a message telling me that there was an error with one of my photos and it wont load the pictures.  Help!!

    Try using Image Capture to download to a folder on the Desktop.  If there's a damaged file on the iPhone that's preventing the download you can isolate it with Image Capture and then delete it from the iPhone.

  • Plug-in errors and dependency errors with a CAF app in DS in NW CE 7.1

    I am learining to build CAF apps in Developer Studio in NW CE 7.1.  Here are my steps and the errors I am getting:
    Open Developer Studio
    Switch to the CA perspective
    File->New->Project
    Choose Development Component under Development Infrastructure
    Press Next
    Choose Composite Application under sap.com
    Choose MyComponents[demo.sap.com] under 'Local Development'
    Vendor: demo.sap.com
    Name: carpool
    Caption: Car Pool
    Language: American English
    Domain: SAP-xApps
    Support Component: CAF-APP (typed in, not chosen)
    Press Finish
    The following error appears:
    Status ERROR
    Plugin : com.sap.ide.metamodel.core.services.eclipse
    code=0
    Internal error
       Plugin name: Metamodel Core
       Internal error  : com.sap.ide.metamodel.core.services.eclipse
       Class      : com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker
       Method     : computeIdeJarProperties
       Message    : C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
       Exception  : java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    java.io.FileNotFoundException: C:\Program Files\SAP\IDE\CE\eclipse\E:\Program Files\SAP\IDE\CE\eclipse\plugins\com.sap.dictionary.services_10.0.0.070821165456\lib\com.sap.dictionary.services_api.jar (The filename, directory name, or volume label syntax is incorrect)
    at java.util.zip.ZipFile.open(Native Method)
    at java.util.zip.ZipFile.<init>(ZipFile.java:203)
    at java.util.jar.JarFile.<init>(JarFile.java:132)
    at java.util.jar.JarFile.<init>(JarFile.java:70)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.computeIdeJarProperties(ArchiveVersionChecker.java:296)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.doFullCheck(ArchiveVersionChecker.java:214)
    at com.sap.ide.mmservices.core.eclipse.project.ArchiveVersionChecker.checkProject(ArchiveVersionChecker.java:125)
    at com.sap.ide.mmservices.core.eclipse.generation.GenerationServiceEclipse.checkArchiveVersions(GenerationServiceEclipse.java:110)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.checkArchiveVersions(GenerationBuilder.java:335)
    at com.sap.dictionary.tools.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:85)
    at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:624)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:166)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:197)
    at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:246)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)
    at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:249)
    at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:302)
    at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:334)
    at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:137)
    at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:235)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    I do not think I missed anything installing NW CE 7.1, but this error makes me think that some plug-in was erroneously left out of the install. 
    Incidentally, I can continue onward and build an app (this is obviously a tutorial), but when I try to deploy I get the following error:
    The deployment of the archive failed with an exception!
    ([ERROR CODE DPL.DCAPI.1027]) DependenciesResolvingException.
    Reason:[ERROR CODE DPL.DC.3033] An unresolved dependencies error
    occurred while sorting the deployment batch items regarding the
    dependencies.;nested exception is:
    com.sap.engine.services.dc.cm.deploy.sdu_deps_resolver.UnresolvedDepen
    denciesException:[ERROR CODE DPL.DC.3437]Unresolved dependencies
    found for the following deployment items:
    1. Component: name:'carpool~ear',vendor:'my.company',location:
    'localDevelopment',version:'20080501110329',software type: 'J2EE',
    dependencies:'[name:'cafruntimeear',vendor:'sap.com',name:
    'cafcoreear',vendor:'sap.com']
    Unresolved dependency:
    name:'cafruntimeear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Unresolved dependency:
    name:'cafcoreear',vendor:'sap.com'          (not found in the admitted
    batch items and the repository)
    Please check the error log for further informations.
    Again, this looks like I am missing some components.
    Any assistance is greatly appreciated.
    TB

    Further developments:  As you may note from the error message, DS is looking for com.sap.ide.metamodel.core.services.eclipse in both the C: and the E: drive at the same time.  In fact, this file exists in the E: drive subdirectory listed, so I obviously have an error with two drive designations being concatenated.  Does anyone know how I can change the lookup directory for this dependency (or any dependency)? 
    Thanks,
    TB

  • PeopleSoft XML Publisher report error with java.io.FileNotFoundException

    Hi,
    I have created two reports using XML Publisher in Peoplesoft Financials. The two reports are not related and they were submitted for processing separately. The first report completes without any issues. The second report results in error with the following message:
    09.11.17 ..(CIS_POTRPT.XML_FILE.Step03) (PeopleCode)
    [012309_091118154][oracle.apps.xdo.template.FOProcessor][EXCEPTION] IOException is occurred in FOProcessor.setData(String) with 'files/cis_potrpt.xml'.
    [012309_091118500][oracle.apps.xdo.template.FOProcessor][EXCEPTION] java.io.FileNotFoundException: files/cis_potrpt.xml (A file or directory in the path name does not exist.)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java(Compiled Code))
         at java.io.FileInputStream.<init>(FileInputStream.java:89)
         at oracle.apps.xdo.template.FOProcessor.getInputStream(FOProcessor.java:1316)
         at oracle.apps.xdo.template.FOProcessor.getXMLInput(FOProcessor.java:1100)
         at oracle.apps.xdo.template.FOProcessor.setData(FOProcessor.java:372)
         at com.peoplesoft.pt.xmlpublisher.PTFOProcessor.generateOutput(PTFOProcessor.java:53)
    2009-01-23-09.11.18.000418 AePcdExecutePeopleCode [174] Exception logged: RC=100.
    Error generating report output: (235,2309) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport PCPC:51552 Statement:1153
    Called from:CIS_POTRPT.XML_FILE.GBL.default.1900-01-01.Step03.OnExecute Statement:8
    2009-01-23-09.11.18.000617 DoStepActions [1797] Exception logged: RC=100.
    Process 598607 ABENDED at Step CIS_POTRPT.XML_FILE.Step03 (PeopleCode) -- RC = 24 (108,524)
    In the process monitor detail > view log/trace page, the xml file is accessible so the file was generated to a valid directory.
    The weird thing is I was able to run this report without any issues few weeks ago although another user also ran into same error. The PeopleCode step that has been identified is essentially same in the two reports. I checked the app server and the directory does exist as well as the xml files for the two reports. The problem does not occur in test environment, just in production. Any help would be appreciated.

    We encounter the same problem. Did you get the answer for this issue? Thanks in advance.

  • When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
    if you can help me thank's
    [email address removed by host]

    thank's for reply and your help
    i did the step's that you told me but  i still have the same problem
                                     i have the latest v.11.0.7
    i
    i disable the protected mode

  • XML Publisher Error with reports

    Hi All,
    I am geting the following error with a report published using XML Publisher
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    The system cannot locate the resource specified. Error processing resource 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.d...
    How can i Rectify this?
    Please update....

    Hi Darshan,
    I have done the same change what you suggested at the site level for UTF8, but its still showing the same error
    The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    End tag 'p' does not match the start tag 'a'. Error processing resource 'http://eyerpdev.etihad.local:8001/OA_CGI/FNDWRR.ex...
    <p class="c0"><a name="Text54" id="Text54"><a name="Text53" id="Text53"><span class="c1">From Period...
    Many thanks....

  • Error With Export/Print from Crystal Report Viewer

    Hello there,
    I've searched through the web and SAP discussion boards with not much luck with this issue.
    After working through this for some days now I've decided to look here for help.
    Environment:
    I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
    I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
    Problem:
    When I attempt to export, I receive the prompt to select format and pages.
    When I click export after selections most times I receive an error with the text
    Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
    Other times the page simply refreshes on export.
    When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
    No Print or Export document is ever created.
    As many print/export issues seems to be related, I'm guessing this two issues are as well.
    Notes:
    I am utilizing the ReportClientDocument model
    I am storing this in session to use as the crystal report viewer report source on postbacks
    I am assigning a subset of export formats to the crystal report viewer
    I am setting particular parameters as well on the report source
    At this point I would appreciate every assistance I may receive on this issue
    Thanks in advance,
    Below is the pertinent code
    Code:
    <aspx>
       <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
       AutoDataBind="true" EnableDatabaseLogonPrompt="False"
       BestFitPage="False" ReuseParameterValuesOnRefresh="True"
      CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
      ToolPanelView="None" PrintMode="Pdf"/>
    <Codebehind>
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Web;
    using System.Web.UI;
    using System.Web.UI.WebControls;
    using CrystalDecisions.Enterprise;
    using CrystalDecisions.ReportAppServer.ClientDoc;
    using CrystalDecisions.ReportAppServer.CommonObjectModel;
    using CrystalDecisions.ReportAppServer.Controllers;
    using CrystalDecisions.ReportAppServer.DataDefModel;
    using CrystalDecisions.ReportAppServer.ReportDefModel;
    using CrystalDecisions.Shared;
    namespace ClassicInternalReportPage
        public partial class Reports : System.Web.UI.Page
            protected override void OnInit(EventArgs e)
                base.OnInit(e);
                if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
                    SessionMgr sessionMgr = new SessionMgr();
                    EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
                    EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
                    InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
                    if (reportService != null)
                        string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
                           + "Where SI_PROGID='CrystalEnterprise.Report' "
                           + "And SI_ID = {0} "
                           + "And SI_INSTANCE = 0", Request.QueryString["rId"]);
                        InfoObjects infoObjects = infoStore.Query(queryString);
                        ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
                        if (infoObjects != null && infoObjects.Count > 0)
                            ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
                            Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
                            CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                            CrystalReportViewer1.DataBind();
                //Viewer options
                // Don't enable prompting for Live and Custom
                CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
                CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
                CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
            protected void Page_Load(object sender, EventArgs e)
                if (IsPostBack && CrystalReportViewer1.ReportSource == null)
                    CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                    CrystalReportViewer1.DataBind();
            private bool AssignReportParameters(ISCDReportClientDocument reportSource)
                bool success = true;
                if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
                    if (Request.QueryString["t"] == "2")
                        reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
                        reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
                else if (Request.QueryString["t"] == "3")
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
                else
                    //Unknown report type alert
                    success = false;
                return success;

    Thanks Don for your response,
    I'm new to the SCN spaces and my content has been moved a couple of times already.
    In response to your questions
    The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
    My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
    If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
    Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
    Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
    App pool is running in 32 bit mode
    Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
    It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
    Thank you for your patience and advice,

  • After upgrade to 4.1 from 3.2, admin logon page error with "done error load

    Hello all,
    Just upgraded 3.2 to 4.1. ran @apexins.sql sysaux sysaux temp /i/. Installation was successful and upgrade completed with no errors. When trying to log on to admin page, url changes to admin workarea but with IE we get "done error loading pages" and logon screen doesn't appear. All objects are compiled, accounts are unlocked and valid. Same thing happens when attempting to logon to the applicaiton. Any help would be appreciated. Open SR with oracle support, but no reply since yesterday.
    inital url: https://xxxxxxxx.xxx.com:8443/pls/apex/apex_admin
    ending url: https://xxxxxxxx.xxx.com:8443/pls/apex/f?p=4550:10:903647939084101
    "done error loading pages"
    Edited by: user12128153 on May 18, 2012 2:21 AM

    Hi user12128153 (a real name would be nice),
    a few questions for you.
    Do you experience the same errors with firefox? If so install firebug (if you don't have it already) and see if the errors have to do with missing css etc.
    What application server do you use, OHS/Apex Listener etc?
    Kofi

  • App-V 5 SP1: Error with SAP GUI 7.3

    Hallo!
    We work on a project to use SAP GUI 7.3 with latest fixes with App-V 5. This works fine so far with the exception of only one transaction in SAP - SWDD. This windows shows no icons on top. After waiting for a while this transaction stops working and SAP
    GUI crashes. SAP support says it's an error with App-V. So we tried to find some error with process monitor. We are able to see many of these errors:
    Date & Time: 19.11.2013 11:02:26
    Event Class: Registry
    Operation: RegOpenKey
    Result: NAME NOT FOUND
    Path: HKU\S-1-5-21-1393060369-1102717077-1881041405-25977_CLASSES\AppV\Client\Packages\4782139E-FD11-4C4D-84FB-57E849A8B823\Registry\Machine\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
    TID: 10504
    Duration: 0.0000049
    Desired Access: Maximum Allowed
    Date & Time: 19.11.2013 11:02:31
    Event Class: Registry
    Operation: RegEnumKey
    Result: BUFFER TOO SMALL
    Path: HKCR\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
    TID: 10504
    Duration: 0.0000021
    Index: 0
    Length: 0
    Date & Time: 19.11.2013 11:02:31
    Event Class: Registry
    Operation: RegOpenKey
    Result: NAME NOT FOUND
    Path: HKLM\SOFTWARE\Microsoft\AppV\Client\Packages\4782139E-FD11-4C4D-84FB-57E849A8B823\Versions\E7BFC8A3-BB43-4739-A7A8-604AA3A68E84\Registry\Machine\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
    TID: 10504
    Duration: 0.0000123
    Desired Access: Maximum Allowed
    There are hundreds of these entries. What are these NAME NOT FOUND errors? Did anyone of you successful sequence SAP Gui 7.3 with App-V 5?
    Thanks for help.
    Dietmar

    Hello,
    See this topic which explains BUFFER TO SMALL.
    http://blogs.technet.com/b/markrussinovich/archive/2005/05/17/buffer-overflows.aspx
    The Name not found indicates that it is looking for a registry key (location is the path) and not finding it. That may not be a problem, as it usually traverses multiple locations (HKCU and / or HKLM, native and virtual..).
    First question is;
    On a machine with SAP installed natively - is there an entry named;
    HKLM\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
    or
    HKCU\Software\Classes\CLSID\{3BE786A0-0366-4F5C-9434-25CF162E475E}\ExtendedErrors
    If yes, does it exist in the package?
    Nicke Källén | The Knack| Twitter:
    @Znackattack

  • SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

    SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
    after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
    Thanks and Regards, Rangnath Mali

    Hi Rangnath,
    For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
    Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

Maybe you are looking for

  • Invoice not generated through Batch Job

    Hello I am facing a Problem in Batch Job. When the delivery is created through VL01n transaction manually, the Invoice for this delivery is created automatically. However for one of the delivery the Invoice was not created automatically through Batch

  • Setting dynamic values to entity object

    Is there any way to set bean values (dynamic values) to Entity Object while commit the record, and how can i set these values using Groovy language Thanks in advance

  • Problem in creating Info record for vendor -AFFI account group

    Hi experts, I am trying to create a info record for a material for a vendor -1000 which is of AFFI account group. system in giving me an error saying that the material is not maintain in the plant 1000. However the plant i am working is for 2000 and

  • EA1 - PgDown, PgUp doesn't work in editors

    SQLDev version: 4.0.0.12, Windows XP Select some table -> right-click Open -> select "Data" tab -> pressing keys "Page Up", "Page Down" doesn't work. The same is with "Columns" tab (you can check if you have a table with a dozens of columns) A little

  • How to deactivate on a computer that is dead

    My computer died completely. I could not even start it up. I bought a new one and installed Adobe Photoshop Elements 13 from a .dmg file on had on a backup drive. Now when I try to activate Elements I am told it is already activated on two computers