Error with viewing out of Firewire (hard to explain in 1 line)

I am editing on an iMac with FCP 5.1. For capturing I have my DV camera running into one of the firewire ports and my external drive running into the other firewire port which I am capturing to. This works great
However while I am editing I view the screen on a TV plugged into the output of the camera so the video streams from FCP into the camera and out into the tv. However this is having issues with not displaying the video properly and just getting black bars in footage when trying to stream footage. It looks fine on the computer but its not streaming out to the camera properly. Now I realise that the iMac has only one firewire bus but I thought that if it captures fine streaming both signals at once then the reverse should also work. Any ideas?
G5 iMac 20inch, Macbook   Mac OS X (10.4.7)   FCS 5.1, 500GB External

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Similar Messages

  • Error with view link and ADF table Tree

    Hello
    ( Note: View objects are created based on static data but not from database tables)
    I created two view objects "SuiteViewObject" and "FamilyViewObject" which are based on static data( stored in collection) but not on database entity. A veiw link "SuiteFamilyViewLink" is created from the above two view objects. An ADFTreeTable is created from the above view objects and view link. When run the jspx page containing ADFTreeTable, following error is occured in the browser.
    JBO-30003: The application pool (staticviewobjects.staticappLocal) failed to checkout an application module due to the following exception:
    oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.InvalidOperException, msg=JBO-26016: Cannot set user query to view "FamilyViewObj2" because it is a destination in a view link
    Any help on the above error message.?
    Thanks in Advance
    Kristi
    Bangalore
    Message was edited by:
    user576892

    Hello
    The above error is coming becuase view link's SQL query expects tables. But in my case I dont have tables, view objects are created from static data source(collection).
    How to create a view link from view objects which are created based on static data source(collection)?

  • Possible error with viewing same site on desktop and iPad

    Site is viewing correctly on desktop but on iPad everything not pinned is being pushed to left with white space to the right of page.
    There are no hidden or active elements off the page anywhere..

    Here is an observation.
    With Acrobat Reader 11.0.02 installed on OS X 10.8.2 and Windows 7 (with latest updates), the reported default page display resolution in Reader's preferences is 81 for OS X, and 96 for Windows. What this means in English is that PDF that are viewed on OS X appear noticeably smaller than when viewed at 96 ppi. Like looking backwards through binoculars.
    What happens if you adjust the Reader custom display resolution to 96 ppi. Does this improve the visuals with Windows counterparts?
    On IOS, and in particular, later models of iPad and iPhone, you are looking at PDF at default display resolutions upwards to 326 ppi. I would hope that the PDF look sharper on IOS 5/6 than they do on OS X. Try setting the custom display resolution in Adobe Reader on OS X to 326 ppi. Notice any sharper (albeit) huge resolution difference?
    Are you requesting the “Best” setting for Pages PDF export, or “Better.” There is a 150 ppi resolution difference for text in those settings.

  • Error with View Quality Results in workorder

    Hi All
      When I do a View Quality Results for a workorder, getting error :
          "Error   - no data found for region (/oracle/app/qa/region/ )
      Please suggest
    Thanks,

    please post applicaation release Db version and os platform
    did you bounse apache?
    was this working before or first time?
    steps to reporoduce the issue ?
    please see this
    No Data Found For Region () When Searching Item In IProcurement [ID 1521355.1]
    No Data Found for Region IRC_VACANCY_EDIT_REVIEW_PAGE Error When Updating an Approved Vacancy [ID 809593.1]
    No Data Found For Region When Entering QA Results From EAM [ID 1327150.1]
    Unable to view Quality Results, You have encountered an unexpected error. Please contact the System Administrator for assistance. [ID 799707.1]
    AppsMAsti
    Sharing Is Caring

  • Error with view reports by drill down

    Hello all!
    I have problem with show drill-down reports.
    But step by step:
    I have 2 reports (made by Answers). And drill down from 1-st to 2-nd.
    When i click on link IE show that it cann't show page.
    I press F5 same times after that 2-nd report show.
    I cann't understand why it happend. Maybe You cen help me.
    Thank you.

    Thank you for all. I found the cause of the problem. In our network and security configuration in front of OBIEE service we have IIS. User connect to port of IIS (9704) and IIS connect to OBIEE. In make for more control of connect and actions.
    When I connect direct to OBIEE the problem is gone.
    Supposedly IIS created the problem when I click on reports

  • Problems with in/out points when submitting jobs via Terminal/command-line

    I've writting a GUI based script which allows a user to select a source Quicktime file, and will encode that file to multiple formats, and trims each destination based on specific timecode in/out points. However, I'm having problems getting the Compressor command-line interface to honor the in/out timecodes that I've explicitly set for multiple jobs within a single commandline.
    In other words, if I want to encode a source Quicktime between 01:00:00:00 and 01:00:29:23 with just ONE setting/destination, then the following commandline works:
    /Applications/Final\ Cut\ Studio/Compressor.app/Contents/MacOS/Compressor -clustername MHM -batchname CLI_BATCH -jobpath /Volumes/mel/temp/20120329/TEST_SRC.mov  -settingpath /Volumes/common/settings/compressor/M9_Slave/_Local_/OTWC.setting -destinationpath /Volumes/mel/temp/20120329/TEST1234_Testing30_OTWC.mov -in 01000000 -out 01002923
    But if I try to append multiple settings/destinations to the commandline, Compressor will only honor the -in/-out arguments which appear in the LAST -jobpath instance in the commandline.
    For example, the following commandline will properly encode the file to multiple destination files, using the appropriate .settings file, but it ignores the -in/-out points that were set for any -jobpath instance that appears before the last -jobpath instance (in other words, every file is output using 00:59:57:00/01:00:30:01 as the in/out points, instead of having the "*_OTWC.mov" file output using 01:00:00:00 as the in point)
    /Applications/Final\ Cut\ Studio/Compressor.app/Contents/MacOS/Compressor -clustername MHM -batchname CLI_BATCH -jobpath /Volumes/mel/temp/20120329/TEST_SRC.mov  -settingpath /Volumes/common/settings/compressor/M9_Slave/_Local_/OTWC.setting -destinationpath /Volumes/mel/temp/20120329/TEST1234_Testing30_OTWC.mov -in 01000000 -out 01002923 -jobpath /Volumes/mel/temp/20120329/TEST_SRC.mov -settingpath /Volumes/common/settings/compressor/M9_Slave/_Local_/HNN-HD.setting -destinationpath /Volumes/mel/temp/20120329/TEST1234_Testing30_HNN-HD.mov -in 00595700 -out 01003001
    It's wierd that everything else about this command-line syntax works as expected (and as explicitly stated in the Compressor -help output, which says "when submitting individual source files. (The) Following parameters are repeated to enter multiple job targets in a batch"), except for the -in/-out points.
    I've even tried quoting the -in/-out arguments using colons (e.g., -in "01:00:00;00") , but this doesnt appear to change the behavior.
    Is this a bug, or am I missing something here?

    I've writting a GUI based script which allows a user to select a source Quicktime file, and will encode that file to multiple formats, and trims each destination based on specific timecode in/out points. However, I'm having problems getting the Compressor command-line interface to honor the in/out timecodes that I've explicitly set for multiple jobs within a single commandline.
    In other words, if I want to encode a source Quicktime between 01:00:00:00 and 01:00:29:23 with just ONE setting/destination, then the following commandline works:
    /Applications/Final\ Cut\ Studio/Compressor.app/Contents/MacOS/Compressor -clustername MHM -batchname CLI_BATCH -jobpath /Volumes/mel/temp/20120329/TEST_SRC.mov  -settingpath /Volumes/common/settings/compressor/M9_Slave/_Local_/OTWC.setting -destinationpath /Volumes/mel/temp/20120329/TEST1234_Testing30_OTWC.mov -in 01000000 -out 01002923
    But if I try to append multiple settings/destinations to the commandline, Compressor will only honor the -in/-out arguments which appear in the LAST -jobpath instance in the commandline.
    For example, the following commandline will properly encode the file to multiple destination files, using the appropriate .settings file, but it ignores the -in/-out points that were set for any -jobpath instance that appears before the last -jobpath instance (in other words, every file is output using 00:59:57:00/01:00:30:01 as the in/out points, instead of having the "*_OTWC.mov" file output using 01:00:00:00 as the in point)
    /Applications/Final\ Cut\ Studio/Compressor.app/Contents/MacOS/Compressor -clustername MHM -batchname CLI_BATCH -jobpath /Volumes/mel/temp/20120329/TEST_SRC.mov  -settingpath /Volumes/common/settings/compressor/M9_Slave/_Local_/OTWC.setting -destinationpath /Volumes/mel/temp/20120329/TEST1234_Testing30_OTWC.mov -in 01000000 -out 01002923 -jobpath /Volumes/mel/temp/20120329/TEST_SRC.mov -settingpath /Volumes/common/settings/compressor/M9_Slave/_Local_/HNN-HD.setting -destinationpath /Volumes/mel/temp/20120329/TEST1234_Testing30_HNN-HD.mov -in 00595700 -out 01003001
    It's wierd that everything else about this command-line syntax works as expected (and as explicitly stated in the Compressor -help output, which says "when submitting individual source files. (The) Following parameters are repeated to enter multiple job targets in a batch"), except for the -in/-out points.
    I've even tried quoting the -in/-out arguments using colons (e.g., -in "01:00:00;00") , but this doesnt appear to change the behavior.
    Is this a bug, or am I missing something here?

  • Error with a File Sender interface

    Hi gentz,
    we have an error with an interface which we can't explain. We are using a File Sender Adapter with File Transfer Protocol.
    We are receiving the following eror:
    <i><b>Could not process file '0080953854-071201.csv': com.sap.aii.adapter.file.ftp.FTPEx: 550 SAPUIT: The system cannot find the file specified</b></i>
    It seems that we can see that there is a file present, but it also is saying that the file can not be found.
    We already tested the connection with a separate FTP program, and here we have no errors in retrieving the file.
    Has anybody got a clue what we are doing wrong???
    Thanks in advance!
    Peter

    Hi Peter,
    which Tool do you use as FTP-Client (WS_FTP)?
    Make sure taht you refresh the client (F5); WS_FTP does not automatically refresh.
    But I also suggest to copy and paste the filename agin from folder on server into your communication channel.
    Sometimes the filenames are different, but the eyes are to tired
    Greetz Mario

  • Import errors with numbers, not enough memory

    Import errors with numbers, not enough memory

    Hi heiko,
    From your system profile line, it appears you should be asking this question in the iWork For iOS forum, not this one, which deals with Numbers for Mac OS X. I'd also suggest being a bit less cryptic in writing your question.
    The link will take you to the iWork for iOS forum.
    Regards,
    Barry

  • Disk Erase failed with the error- Operation timed out

    I've checked my computer- Mac Book White in Apple store, everything is fine just the hard disk has been corrupted. Needed to erase and reinstall. By the time I wanted to erase it, I can't erase and appears "Disk Erase failed with the error- Operation timed out".
    Anyone knows how to solve this question would be nice.
    Thanks

    Well give this a try:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Now download a utility like TinkerTool System or Leopard Cache Cleaner - VersionTracker or MacUpdate - and use it to clear out your system, user, and font caches.
    And, try this for the software update issue:
    Fix for Software Update
    See Troubleshooting Automatic Software Update in Mac OS X.
    Delete the following files:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist
    "xxx" is a number.
    /Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

  • Out of memory error to view AVI files

    Hi everyone,
    I've imported 6 AVI files from the same source into the browser. All work fine except for 2 of them. When I click on those files in the browser to preview them in the viewer, I receive 2 messages: the first one is 'general error', the second 'out of memory'. What strikes me is that in the browser, the duration marks 0 although the files are respectively 4MB and 1,6MB. I've compared them to the 4 others and they are similar. Any idea would be welcome. Many thanks in advance.

    Welcome to the forum!
    AVI files don't work with FCP. FCP is based in Quicktime. You will need to convert all you AVI files to an quicktime editing codec like ProRes or DV-NTSC You can find a list of editing codecs in FCP's Easy Setup. You can use Compressor to convert the files.

  • How to view windows Xp formatted hard drive with Macbook pro without losing data

    How to view Windows Xp programed Hard drive with Macbook pro with out losing data on hardrive

    Go to the First Aid tab in Disk Utility, select the external drive partition and read the format from the lower left, at the bottom.

  • Can anyone help with an out of memory error on CS2?

    Hello,
    I have been battling with an out of memory error on a dell laptop running 2gb of ram. I have had no prior issues with this laptop running CS2 until last week when I started getting the out of memory errors. I have seen several articles about this occuring on later versions of illustrator. Just prior to this issue appearing I had to delete and rebuild the main user profile on the computer due to it consistently logging into a temporary account.
    Once the new profile was established and all user documents and profile settings were transferred back into it, this problem started showing up. The error occurs when clicking on files listed as Illustrator files, and when opening the illustrator suite. Once I click on the out of memory error it still continues to load illustrator. The files are located on a server and not on the remote computer. I have tried to copy the files to the local hard drive with the same result when I try to open them. I also tried to change the extension to .pdf and got no further. I tried to open a file and recreate the work and all I got was the black outline of the fonts. none of the other artwork appeared. once rebuilt, when trying to save, It gives the out of memory error and does not save the file.
    Illustrator was installed on another dell laptop, same model, etc and works fine. no problem accessing network files. I just attempted to use Illustrator from the admin profile on the machine in question and it works fine and lightening fast. Just not from the new rebuilt profile. I have tried to uninstall and reinstall the software. it has not helped. could there be stray configuration settings that we transfered over to the new profile that should not have been?
    Any insights will be helpful.
    Thank You,
    Brad Yeutter

    Here are some steps that could help you:
    http://kb2.adobe.com/cps/320/320782.html
    http://kb2.adobe.com/cps/401/kb401053.html
    I hope this helps!

  • Error With Export/Print from Crystal Report Viewer

    Hello there,
    I've searched through the web and SAP discussion boards with not much luck with this issue.
    After working through this for some days now I've decided to look here for help.
    Environment:
    I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
    I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
    Problem:
    When I attempt to export, I receive the prompt to select format and pages.
    When I click export after selections most times I receive an error with the text
    Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
    Other times the page simply refreshes on export.
    When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
    No Print or Export document is ever created.
    As many print/export issues seems to be related, I'm guessing this two issues are as well.
    Notes:
    I am utilizing the ReportClientDocument model
    I am storing this in session to use as the crystal report viewer report source on postbacks
    I am assigning a subset of export formats to the crystal report viewer
    I am setting particular parameters as well on the report source
    At this point I would appreciate every assistance I may receive on this issue
    Thanks in advance,
    Below is the pertinent code
    Code:
    <aspx>
       <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
       AutoDataBind="true" EnableDatabaseLogonPrompt="False"
       BestFitPage="False" ReuseParameterValuesOnRefresh="True"
      CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
      ToolPanelView="None" PrintMode="Pdf"/>
    <Codebehind>
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Web;
    using System.Web.UI;
    using System.Web.UI.WebControls;
    using CrystalDecisions.Enterprise;
    using CrystalDecisions.ReportAppServer.ClientDoc;
    using CrystalDecisions.ReportAppServer.CommonObjectModel;
    using CrystalDecisions.ReportAppServer.Controllers;
    using CrystalDecisions.ReportAppServer.DataDefModel;
    using CrystalDecisions.ReportAppServer.ReportDefModel;
    using CrystalDecisions.Shared;
    namespace ClassicInternalReportPage
        public partial class Reports : System.Web.UI.Page
            protected override void OnInit(EventArgs e)
                base.OnInit(e);
                if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
                    SessionMgr sessionMgr = new SessionMgr();
                    EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
                    EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
                    InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
                    if (reportService != null)
                        string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
                           + "Where SI_PROGID='CrystalEnterprise.Report' "
                           + "And SI_ID = {0} "
                           + "And SI_INSTANCE = 0", Request.QueryString["rId"]);
                        InfoObjects infoObjects = infoStore.Query(queryString);
                        ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
                        if (infoObjects != null && infoObjects.Count > 0)
                            ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
                            Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
                            CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                            CrystalReportViewer1.DataBind();
                //Viewer options
                // Don't enable prompting for Live and Custom
                CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
                CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
                CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
            protected void Page_Load(object sender, EventArgs e)
                if (IsPostBack && CrystalReportViewer1.ReportSource == null)
                    CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                    CrystalReportViewer1.DataBind();
            private bool AssignReportParameters(ISCDReportClientDocument reportSource)
                bool success = true;
                if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
                    if (Request.QueryString["t"] == "2")
                        reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
                        reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
                else if (Request.QueryString["t"] == "3")
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
                else
                    //Unknown report type alert
                    success = false;
                return success;

    Thanks Don for your response,
    I'm new to the SCN spaces and my content has been moved a couple of times already.
    In response to your questions
    The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
    My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
    If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
    Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
    Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
    App pool is running in 32 bit mode
    Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
    It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
    Thank you for your patience and advice,

  • Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tell me that the file is being used even when  it is not. How can I fix this issue?

    Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when  iall other programs are closed. How can I fix this issue?

    Thanks Jeff, I was not aware that a template could be multi-page.  (All the existing templates were 1 page)
    But it worked, saving me some steps.  When I was finished I renamed the document, and locked it.
    Then tried to save it but  could not because it was locked.  I closed it, went to my Spread Sheet Folder ,
    to find it, it was not there.  The Finder could not find it either.
    So I start over again.
    I opened up Numbers and it showed my personal Numbers template folder, it contained both my new 
    original 4 page template and the vanished saved document!
    I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again.  I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
    The secret is: Click on the document title in the menu bar, and it opens up  "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving.  Once done that, you can then lock the document in the same pull down menu, and then close it.
    I also found later that I can delete a template from its folder, by letting Numbers open the templates,
    clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
    and from there the selected template can then be thrown into the Trash from there.
    It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.

  • How can I use a firewire hard drive on a new Macbook with one USB-C only?

    How can I use a firewire hard drive on a new MacBook with only one USB-C?

    kaz-k is correct about FireWire not being supported by any possible connector or adaptor to USB-C and never will.  However, there is no such thing as a FireWire Hard Drive.  There are only SATA (or if it is a really old one, ATA,) drives in a FireWire enclosure.  If you can remove the drive from the case/enclosure - bust it open somehow if it is a glued-up unit - then the drive can be placed into a regular USB3 enclosure. Then it can connect to the new MacBook via any one of the adaptors Apple sells.

Maybe you are looking for