Error:Work item 000000001099:Object FLOWITEM method EXECUTE cannot be execu

Hello experts,
I have created a Sales order workflow whr after creation sales order will go to 1 person inbox and he will check the SO thoroughly and thn i hv added a user decision step for APPROVED or REJECTED for same person.
Now after creation of sales order it goin to the person inbox for checkin SO but when he is saving it thn decision screen with button APPROVED or REJCTED is not coming and m getting error :Work item 000000001099: Object FLOWITEM method EXECUTE cannot be executed. and error: Error when processing node '0000000024' (ParForEach index 000000)
i checked the agent mapping for both step....and thr is no error in agent mappin...in both steps i have mapped same rule with responsibility IDs
PLz suggest urgently wht can be cause of error.
Regards
Nitin

Hi Nitin,
I think this seems to be an agent assignment issue.
To debug this issue go to the workflow log and check if the agents are correctly being picked by the rule or not. Simulate the rule and check for the agents being picked.
In the workflow log, check the agent for the User Decision step. If there is no agent found then there might be some issue with the data passed to rule.
Hope this helps!
Regards,
Saumya

Similar Messages

  • Work item 000000400082: Object FLOWITEM method EXECUTE cannot be executed?

    Hello,
    I am getting the above mentioned error during the start of the custom built workflow.
    The process to re-produce the error is as follows;
    1. The employee raises a travel request which goes to his reporting officer for the approval process.
    2. The custom workflow built uses the business object BUS2089 for triggering. The event used in the case is REQUESTCREATED of BUS2089. In binding of the workflow template, I have taken _EVT_OBJECT and _EVT_CREATOR as input parameters to my workflow container elements.
    3. Once the workflow is triggered a background step is processed by which a PDF document of the employee travel details are fetched and attached to the respective work item ID. This attachment is done using a standard task and a Z-customized Object type and method.
    4. Once the attachment is added, the next step forwards the attachment to the reporting officer of the employee for the approval process which is a dialog decision step, either approve or reject.(Agent Assignment is working fine. Tested in PFAC using the simulation mode for the employee code)
    Now the issues in DEV system are as follows;
    1. when the employee raises the request, the workflow throws the error at the start of the workflow, however the start event is received.
    2. The PDF document is not getting attached in the background step, but the same Z-customized object type is working fine in QA and PRD
    3. The work item number 400082, as mentioned above for which the error is coming is the work item of the start of the workflow.
    4. Also, I am getting error : Error when processing node '0000000021' (ParForEach index 000000). This node number is the node of the dialog decision, either approve or reject.
    I have double checked the binding between workflow container->task container->method parameters and vice versa. I dont see any change. I have attached necessary screen shots of step history and graphical log.
    Kindly advice.
    Thanks & Regards
    Rao Chinmay AN

    Hello Ronen, Rick, Modak
    Thank You for your timely response.
    Rick/Ronen,
    As mentioned by you, when i checked the step history in detail of the error step, it clearly stated that the error is in agent determination. I have attached the necessary screenshot.
    I did a background check myself on rule - 90100002 which is again the customized one. I simulated it under transaction PFAC and entered the employee code for which i am running the test. It says agent has been determined and the employee code of his reporting officer is displayed.
    I checked the binding of the same from the workflow to the rule container. It is fine. I have attached the screenshot of the same.
    And Rick,
    I have checked the Agent Assignment of the User Decision Task. I have gone to PFTC, entered the task number. Menu bar- Additional Data->Agent Assignment->Display.
    It Says:    General task: can be edited by all users.
    So i Suppose it is the general Task.
    Kindly advice.
    Thanks,
    Chinmay.

  • BPM error: exception cx_merge_split occured,object FLOWITEM method EXECUTE

    Hi Guys
    I am working on a interface involving BPM.....
    I am facing this problem while executing the interface...
    I am getting error texts as below:
    exception cx_merge_split occured,
    object FLOWITEM method EXECUTE
    I am trying to fix it....Please provide any iputs on this...
    Thanx in adavance.

    Is your Transformation step designed for multimapping (n:1 or 1:n)?
    If yes the payload seems to be incorrect....did you check the working of your mapping (MM/ IM) using the expected payload structure...
    the transformation step in BPM has been given exception as System Error
    There is one block step before the transformation step...in which exception is not given...?can this be the cause??
    Does it mean...you have a Block step in your BPM and your Transformation Step is placed in it....the Block should have an exception handling branch...have the exception handling logic as per your need....the Block step needs to use Exception Handler...same Handler to be used in the Transformation Step's System Error section.
    Press F7 and check if your BPM is giving any warning message.
    Regards,
    Abhishek.

  • PO release workflow - Object FLOWITEM method EXECUTE  - WL821

    Hello,
    I have copied and slightly mofidified std wf WS20000075 (BUS2012). It was successfully tested in DEV.
    Then, after transport to QA, I get the following error in tc SWEL:
    Work item 000000001111: Object FLOWITEM method EXECUTE cannot be executed
    Error when processing node '0000000093' (ParForEach index 000000)
    Agent determination for step '0000000093' failed
    Workflow WS90100001 no. 000000001111 activity 0000000093 role 'AC20000027': No agent found
    Resolution of rule AC20000027 for task TS20000166: no agent found
    Error when processing node '0000000093' (ParForEach index 000000)
    Error when creating a component of type 'Schritt'
    Error when creating a work item
    The top error is detailled as below:
    Work item 000000001111: Object FLOWITEM method EXECUTE cannot be executed
        Message no. WL821
    Any clue on how to fix this this error?
    Best regards,
    Peter

    Hi Rick
    I have same issue and following are details.
    1. I have copied standard workflow and task 166 is throwing error.
    "Resolution of rule AC20000027 for task TS20000166: no agent found"
    2. I have recreated the step but still the workflow is throwing error.
    3. If I execute the rule individually (PFAC_DIS) with a specific PO then the rule works fine. The rule executes the below mentioned exit successfully.
    4. I am using exit to determine the agent, the workflow works fine if I don't use the exit. The exit is EXIT_SAPLEBNF_005. I am just pulling the agent from a ztable.
    Please advise if you can help as I have not seen anyone answering.
    by the way irrespective of the explicit rule update in the workflow the step executes AC20000027 by default.
    Can you please help asap. Thank you.
    regards
    barin

  • Work item 000000399133: Object 000000399133 method SENDTASKDESCRIPTION can

    hi experts,
                       sometimes frequently i get this kind of wrror after executing my workflow.
    Work item 000000399133: Object 000000399133 method SENDTASKDESCRIPTION cannot be executed..how to correct this??what might be the problem?

    HI,
    Please check user to whom you are sending mail are populated OR not ,Please check your rule  .
    For confirmation just hardcode user and then trigger the workflow .
    regards,
    Deepanker Dwivedi

  • Object CL_SWF_XI_MSG_BROKER method CALL_TRANSFORMATION cannot be executed

    Hi all,
    I am getting error in one of the BPM mapping steps.
    The error description is as below:
    Error handling for work item 000000013183
    Work item 000000013186: Object CL_SWF_XI_MSG_BROKER method CALL_TRANSFORMATION cannot be executed
    com/sap/xi/tf/_MM_352_Validated_To_353_File_com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRunti
    The mapping works fine for a set of data.
    But when the validations fail for another set of data it gives the above error.
    Please let me know if you have info on this error.
    Best regards,
    Thangesh

    Hi,
    The scenario is File<->XI->IDoc.
    In BPM, we do validations & if the validation fails, the file is sent back to the Filerserver.
    The File format is a nested structure.
    The File format is as below:
       >Header record
       >Customer
       >Address
       >Address
       >Partner details
            >>Address
            >>Address
       >Partner details 
           >>Address
           >>Address
       >Trailer record
    <b>The mapping works fine for a set of data:</b>
    The mapping works fine if the File structure contains single record per structure/node.
    <b>But the validations fail for another set of data & it gives the above error:</b>
    But the mapping fails if the File structure is complex or nested structure. i.e., more than one record per structure.
    could you kindly suggest how to handle this error?
    best regards,
    Thangesh

  • Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed

    Hi there,
    We are getting this error in our BPM:
    Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
    while sending a message synchronously. This doesn't happen for all the sync send, but I see sometimes. Why do we see this inconsistency in the sync send step of the BPM?
    Has anyone encountered this problem, and fixed it? Your help is greatly appreciated.
    Thanks a lot.
    Karma

    Hi
    First of all check the mapping i.e transformation step in the BPM (Sync mapping). This you can check from the workflow log. Check all these interface mappings are using correct message type and interfaces
    Have a look into these SAP notes-830803,710445
    Regards
    krishna

  • Leave Request Workitem error Work item cannot be executed in status COMPLET

    Hi All,
    In case of leave request application when one particular manager is trying to approve the leqave request he is getting the error message
    Work item 000000003046 cannot be executed in status COMPLETED
    when i check in workflow log i am getting the workitem id for the dialog task it is 0000000002111
    work item id 000000003046 mentioned in the workflows is for my background task which is already completed.
    This is happening on production server. Other managers are able approve and reject the leave.
    Please suggest.
    Regards,
    Umesh Chaudhari.

    Hi Florin,
    Thanks for your reply.
    I could not understand your view fully you are saying
    Why modifying the SAP Standard when it could be solved by the SAPNet? There's a hint in the OSS Note's text regarding a problem for custom-made workflow patterns related here.
    Here are you suggesting some new sap note? which will revert to the previous code or something like that.
    What pavan is talking is
      SORT lt_dep_wis STABLE BY WI_ID.                            "Note ANK 980004
      LOOP AT lt_dep_wis INTO lcl_dep_wis. ENDLOOP.
    Pavan: can you please give the details of the implicit Enhancement - Enhancement point or something as I could not find any implicit enhancement here.
    Please suggest.
    Regards,
    Umesh Chaudhari

  • CcBPM- Error process instance and error work item

    Hi All,
       I i just listing donw my queries about ccBPM.
               1)  What is the difference betwen process instance and work item?
                       I am presuming that, during ccBPM runtime message creates process instance and one process instance can have n number work item. Pleae correct me if i am wrong.
             2) If one process instance is in error status, it means one of the work item is in error. is my undertanding right?
             3) How should i edit/delete work item?
             4) How should i edit/delete process instance?
    Thanks
    Rajesh

    1) What is the difference betwen process instance and work item?
    I am presuming that, during ccBPM runtime message creates process instance and one process instance can have n number work item. Pleae correct me if i am wrong.
    BPM comprises of many Steps. (Receive step, Send step, transform etc...) Durng runtime, A BPM is converted into SAP Workflow in the Background and gets executed. Hence all steps are referred to as WorkItems.
    YES. ccBPM runtime creates multiple instances.. one BPM instance for each inpu message
    2) If one process instance is in error status, it means one of the work item is in error. is my undertanding right?
    Each process instance is independent of the other. Sometimes, the workitems blokc the processing if the other. Hence when the workitems block the processing, they should be deleted using SWWL.
    3) How should i edit/delete work item?
    4) How should i edit/delete process instance?
    You cannot delete a process instance. But can delete the work items.
    -SM

  • Workflow error " Work item could not be found"

    Hi Experts,
    I used transaction SWI2_DIAG to diagnose the error and tried to restart the workitem manually .The changes were made to Org chart  and now everything is fine but I am still getting error message:
    Work item could not be found                                                             
    Workflow 'Post with Clearing Workflow' step number 4: work item could not be created     
    Agent determination for step '0000000004' failed                                         
    Workflow WS93000005 no. 000004806372 activity 0000000004 role 'AC00000168': No agent found
    Resolution of rule AC00000168 for task TS93000019: no agent found   
    Can someone explain what this error message mean and why i cant restart the workitem manually?
    Thanks.

    This is my message from Production:
    Resolution of rule AC00000168 for task TS93000019: no agent found                         
    Workflow WS93000005 no. 000004806372 activity 0000000004 role 'AC00000168': No agent found
    Agent determination for step '0000000004' failed                                          
    Workflow 'Post with Clearing Workflow' step number 4: _work item could not be created_      
    This is my message from development.. I recreted the scenario and getting different message.
    Workflow 'Journal Entry Approval- Approval WF' step number 36: work item could not be created 
    Agent determination for step '0000000036' failed                                              
    Workflow WS93000001 no. 000000986124 activity 0000000036 role 'AC93000003': No agent found    
    Resolution of rule AC93000003 for task TS00007914: _no agent found_
    Edited by: Sergey on Nov 2, 2010 5:05 PM

  • Global object services: Method EXECUTE is not called

    Hi all,
    I implemented a new GOS service and therefore inherited the standard class CL_GOS_SERVICE and redefined the methods CHECK_STATUS and EXECUTE. I also made the entry in table SGOSATTR.
    When I test my new service, the CHECK_STATUS method is called and its ep_status is set to mp_status_active. Everything fine!
    But when I click the appeared menu entry (or service icon) nothing happens. The screen is repainted, nothing more. There is no exception or anything else.
    Does anyone as an idea?
    If you need further information, please let me know.
    Thanks for your help.
    Kind regards,
    Thomas

    Hello Thomas
    Perhaps the answers in thread
    New service in GOS - How to?
    may be helpful.
    Regards
      Uwe

  • Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

    Hi All
    I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Exception occurred - Error when starting work item 000000007031
    PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
    CREATE - Error when creating a component of type 'Step'
    CREATE_WIM_HANDLE - Error when creating a work item
    CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
    Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
    Points to be noted:
    1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
    2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
    Appreciate your valuable suggestions.
    Thanks
    Ragav

    Hi Ragav
    did you try to debug this? maybe something is missing in config of P&F?
    Since you are on 605, the following note would be there in your system....use it to debug:
    1422496 - Debugging background workflow tasks in HCM P&F
    This will help you find the root cause.
    regards,
    modak

  • Error when executing a work item (cannot execute a method, biding problem?)

    Hello,
    I created a specific workflow, triggered by an event, from a class I also created.
    From this event, I get some data about a Document (CV01/02/03N...).
    The first step is a task which refer to a method (from the same class above).
    The binding Task <=> Method is the data about the Document and the Workflow ID.
    After I start the workflow, I execute the work item in SWI1, with a breakpoint in the method.
    I can't go in debug, and the work item is in error (in Workflow log) :
    - "Work item 000000590208: Object ZCL_SA3_WF_GED_RECL_FOURN method UPDATE_FID cannot be executed"
    - "EXECUTE_METHOD_OBJECT_SYNC : Dereferencing of the NULL reference".
    Note: The task is not in background processing, in the aim of debugging the source code.
    I did SWU_OBUF and quit/relog SAP.
    Do you have any ideas to solve this problem ?
    I think it's a biding problem, because I can' t even go in debug mode...
    Thanks.
    Regards
    (sap version: ECC 6.0)

    Hi
    Looking at the error message I feel like there is something wrong in the task object and object method. You are using a class in the task make sure that class has the IF_WORKFLOW. Mak sure the task is enabled with synchronous task method check box.
    Regards
    Pavan

  • BPM Error:Runtime handle of object type could not be created:CX_MERGE_SPLIT

    HI Guys...
    I am working on a RFC to HTTP scenario:
    It is a standard SAP interface ....so we created only ID objects..obviously the BPM delivered by must be correct.
    in sxmb_moni_bpe  it is throwing th following error texts:
    Runtime handle of object type could not be created
    Error executing service for node
    Exception CX_MERGE_SPLIT occured
    component mapping has returned an error
    unmodeled exception when executing service for node
    No payload found
    object FLOWITEM method EXECUTE cannot be executed
    I tested the mapping payload from sxmb_moni in IR and it is working fine.
    Receiver is an HTTP so could not able to find exactly whats happening as no thrid party tools can be installed....struck up here.
    Any iputs will be of help in this area.
    Thanx in adavance.
    Kiran

    any inputs around this plz??

  • Method SENDTASKDESCRIPTION cannot be executed

    Hi,
         I am getting error message while creating attachment in the work item but it was working fine in Development and quality.. only happens in production... without attachment my workflow works fine.. the only problem is attachment.. Pls guide me how to resolve it..
    Error :-   Work item 000000575666: Object 000000575666 method SENDTASKDESCRIPTION c
    Document <FOL33000000000004RAW35000000027513> could not be sent
    Error handling for work item 000000575666...
    Regards,
    Roops.

    Hello,
    I'll see if I can find anything, I assume you've searched as well though.
    Please make sure you're getting all of the error messages in the workflow log, try Extras > All Errors.
    Does it only happen for some users? Check SU53 or ST01 for authorization problems.
    Check that it finds at least one recipient and that it is a valid user.
    Also check SOST for any errors.
    Anyone else have ideas?
    regards
    Rick Bakker
    Hanabi Technology

Maybe you are looking for

  • How to repaint a panel

    Hi All! I am trying to display a few textFields in an AWT applet. The number of textFields I need to set is variable. I want to repaint a portion of an applet (the panel in which these textFields are placed) when a button is clicked. In the code belo

  • Firefox won't start, profile manager won't start, but firefox.exe shows in processes list (task manager)

    Firefox will not start, even though it is listed in my processes in task manager. Can't get profile manager to start either. I have tried the following to no avail: - try to start FF in Safe Mode, doesn't load - started Windows Vista in Safe Mode, FF

  • Clashing Events in iCal

    I have recently converted to Mac (yay!) and have created all of my calendars in iCal. I'm wondering if anyone can help me with iCal and appointment clashing? My problem is that sometimes I have meetings which are fortnightly and some which are weekly

  • Restoring iTunes files from an external HDD?

    I recently began receiving S.M.A.R.T. warnings of imminent failure from my hard drive, running XP SP3. I copied my Music folders and iTunes folders to an external drive just before my computer failed. Checked the external drive and everything was the

  • You do not have access to the printer. use a different username and password - is there a fix?

    Purchased this last night. Difficulty installing and now able to install. Get to the part where you need to put in your username and password. Then I get the you don't have access to printer error. my username and password is correct as I can sign in