Error WWC-41439 on server with ip static

on portl30 when i try to connect to modplsql i recive this error
WWC-41439 !!
i have the server on the net with a static ip adress 194.100.xxx.xxx and i jave not a domain name for the server.
it is possible to obtain a solution?
il vampiro

Hi,
Firstly, would you please post the result of running “ipconfig/all” on the DHCP server and domain controller?
It seems that the DHCP server cannot be authorized in AD DS. Please make sure that the DHCP server is a domain member and try to ping the domain controller on the DHCP server.
Best regards,
Susie

Similar Messages

DHCP Server with the Static IP fill out DNS information

When filling out the DHCP Server with the Static IP from ipconfig.exe in the "Preferred DNS server IPv4 address:
192.168.1.199
The same as in the static IP. The IPv6 DNS one validates IPv4 does not.
I tried using the IPv4 Address and that validated but gave an error at the end: 1059 and 1046.
Gives an error:
"The DNS Server at the specified IP address does not support the required TCP protocol."

Hi,
Firstly, would you please post the result of running “ipconfig/all” on the DHCP server and domain controller?
It seems that the DHCP server cannot be authorized in AD DS. Please make sure that the DHCP server is a domain member and try to ping the domain controller on the DHCP server.
Best regards,
Susie

ERROR WWC-41439

I´ve installed Oracle Database 8.1.7. and Oracle 9ias with Oracle Portal 3.0.
When I click Login Link, I receive the error WWC-41439.
I´ve seen the Troubleshooting List, but I can´t resolve the problem.
Is there somebody in the same situation?
thank you,

Alexandra. -
I edited the httpd.conf and replaced the hostname in uppercase to lowercase and everyhing works now !!. Appreciating your reply.
kp -
My 9iAS installation is in NT.
Thanks guys !!
Jayesh Mehta

ORA-12699: error when connecting to server with FIPS enabled

Hi all,
I have a oracle client and server with FIPS enabled on them. When I use SQL Developer from the client, I can connect to the server and run queries on them.
I have an ADO based application, which I am trying to run on the client to query the oracle server, but the open database call seems to fail on this with the ORA-12699 error ..
Heres the connection string I am using ... "Provider=OraOLEDB.Oracle;Data Source=Test;User Id=scott;Password=tiger;"
Are there any other options to be added to the connection string string ?? any ideas / comments would be of great help ...
Note : I am using Oracle 11G ..
--sachi

Naveen,
Forms 5.0 is not certified and not tested with Oracle DB 10g because it was desupported before 10g got released.
The other problem is hard to give a generic answer for and I suggest to address this to metalink.oracle.com
Frank

Log In Error : WWC-41439

When trying to log in the Portal , I get the following error :
Error: You cannot login because there is no configuration information stored in the enabler configuration table. (WWC-41439)
What could be wrong ?
Thanks.

I got answer to my problem in the Troubleshooting Guide :
Cause: The hostname specified in the httpd.conf file was written using capital letters. This prevents the SSO subsystem from finding a matching entry in the enabler configuration table.
Solution: Modify the servername setting in the httpd.conf file so that the hostname uses all lowercase letters.
regards
null

Error while Integrating Experience Server with Document Server

Hi All ,
I am following tutorial http://help.adobe.com/en_US/enterpriseplatform/10.0/InstallDEP/adep_install_experience_ser vices.pdf
Following step resulted into error
6.1 Integrate Experience Server with Document Server
http://<host>:<port> and click OSGi Console.
Log in using admin/admin as the username/password > Click the Document Services Settings tab. ... click Configure.
Please help
Thanks
YogLC
Error occurred while performing last Command [CreateLCAdminUserCommand]
chainedException: com.adobe.idp.um.api.UMException| [com.adobe.livecycle.usermanager.client.DirectoryManagerServiceClient] errorCode:16385 errorCodeHEX:0x4001 message:Exception wrapped in DSCException is Null or NOT An Instance of UMException chainedException:ALC-DSC-020-000: com.adobe.idp.dsc.InvalidStateException: Service: DirectoryManagerService is not in a RUNNING statechainedExceptionMessage:Service: DirectoryManagerService is not in a RUNNING state chainedException trace:ALC-DSC-020-000: com.adobe.idp.dsc.InvalidStateException: Service: DirectoryManagerService is not in a RUNNING state at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:35) at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60) at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:188) at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60) at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48) at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60) at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121) at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:131) at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke(AbstractMessageReceiv er.java:329) at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:139) at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81) at sun.reflect.GeneratedMethodAccessor459.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397) at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186) at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454) at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281) at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699) at javax.servlet.http.HttpServlet.service(HttpServlet.java:710) at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327) at javax.servlet.http.HttpServlet.service(HttpServlet.java:803) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at com.adobe.idp.um.auth.filter.CSRFFilter.doFilter(CSRFFilter.java:86) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175) at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.ja va:179) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java: 157) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.ja va:580) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447) at java.lang.Thread.run(Thread.java:662)

Looks like there is some issue on the Docuement Server side. Can you provide logs from the Document Server

Error when starting Weblogic server with Coherence

We want to use Coherence 3.6 with Weblogic Server 10.3. During server startup, we get the following error. My understanding is the cluster should be started automatically based on the configuration listed below the error. Appreciate any pointers.
<Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.920/67.311 Oracle Coherence SE 3.6.0.4 <Error> (thread=Cluster, member=n/a): This member could not join the cluster because of a configuration mismatch between this member and the configuration being used by the rest of the cluster. This member specified a cluster name of "EPCIS" which did not match the name of the running cluster. This indicates that there are multiple clusters on this network attempting to use overlapping network configurations. Rejected by Member(Id=9, Timestamp=2011-11-16 13:58:42.941, Address=10.229.189.30:8088, MachineId=21022, Location=site:us.oracle.com,machine:adc2101177,process:30667, Role=WeblogicServer).>
<Dec 15, 2011 3:20:11 PM PST> <Error> <oracle.apps.pas.epc.framework.db.Cache> <BEA-000000> <java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)>
<Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.957/67.349 Oracle Coherence SE 3.6.0.4 <Error> (thread=[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Error while starting cluster: java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)
CONFIGURATION:
We have the following descriptor (epcis-coherence-cache-config.xml) in $DOMAIN_HOME/epc-config:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>distributed</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<distributed-scheme>
<scheme-name>distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme></local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
</caching-schemes>
</cache-config>
We also have tangosol-coherence-override.xml in the same dir:
<coherence>
<cluster-config>
<member-identity>
<cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>
</member-identity>
</cluster-config>
<configurable-cache-factory-config>
<class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>epcis-coherence-cache-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>
<license-config>
<edition-name system-property="tangosol.coherence.edition">SE</edition-name>
<license-mode system-property="tangosol.coherence.mode">dev</license-mode>
</license-config>
</coherence>
We have modified startWebLogic.sh by adding:
PRE_CLASSPATH="/slot/xyz/oracle/mwhome/oracle_common/modules/oracle.coherence_3.6/coherence.jar:${DOMAIN_HOME}/epc-config/:${PRE_CLASSPATH}"

As the error message says, your WebLogic server is trying to join a cluster that has a different cluster name.
This bit in your tangosol-coherence-override.xml file or the tangosol.coherence.clustername system property must be the same in all members of the cluster
<cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>JK

11.5.10 Installation error on win2003 enterprise server with AMD sampron

Hardware :
AMD sempron 2200+ processor with MSI mother board,
120 gb hdd (Baracoda) ,
256 mb ram.
Software : windows 2003 server enterprise edition.
Installation Reqiurements for ora apps 11i. completed and checked.
Error showed at step 2 of 5. while running
There was an error while running the command - F:\oracle\proddb\9.2.0\temp\PROD_oracle\adrundb.cmd APPS APPS
D:\DOCUME~1\oracle\LOCALS~1\Temp>REM
D:\DOCUME~1\oracle\LOCALS~1\Temp>REM These steps only happen when dbseed is not "No Database"
D:\DOCUME~1\oracle\LOCALS~1\Temp>REM
D:\DOCUME~1\oracle\LOCALS~1\Temp>if "Fresh Install" == "No Database" goto :NO_DB
D:\DOCUME~1\oracle\LOCALS~1\Temp>REM UPDATE rollback segs in context
D:\DOCUME~1\oracle\LOCALS~1\Temp>if "Fresh Install" == "Fresh Install" goto :FI_DB
D:\DOCUME~1\oracle\LOCALS~1\Temp>set DRVNAME=gprod.drv
D:\DOCUME~1\oracle\LOCALS~1\Temp>if 0 == 0 goto :UPD_RBS_FI_OK
D:\DOCUME~1\oracle\LOCALS~1\Temp>if "F:\oracle\proddb\9.2.0\temp\PROD_oracle\adrundb.cmd" == "F:\oracle\proddb\9.2.0\temp\PROD_oracle\adrundb.cmd" (if not "runProcess_6" == "FALSE" (goto :runProcess_6 ) else (goto :runProcess_1 ) )
D:\DOCUME~1\oracle\LOCALS~1\Temp>echo "runProcess_6"
"runProcess_6"
D:\DOCUME~1\oracle\LOCALS~1\Temp>REM
D:\DOCUME~1\oracle\LOCALS~1\Temp>REM Perform the instance configuration
D:\DOCUME~1\oracle\LOCALS~1\Temp>REM
D:\DOCUME~1\oracle\LOCALS~1\Temp>echo "Statusstring InstantiateFile -d F:\oracle\proddb\9.2.0\appsutil\template\addbtmpl.drv"
"Statusstring InstantiateFile -d F:\oracle\proddb\9.2.0\appsutil\template\addbtmpl.drv"
D:\DOCUME~1\oracle\LOCALS~1\Temp>E:\11istage\startCD\Disk1\rapidwiz\jre\NT\1.4.2\bin\java -mx512M -classpath .;E:\11istage\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;E:\11istage\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\rt.jar;E:\11istage\startCD\Disk1\rapidwiz\jre\NT\1.4.2\lib\i18n.jar;E:\11istage\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;E:\11istage\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;E:\11istage\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;E:\11istage\startCD\Disk1\rapidwiz\jlib\jnls.jar;E:\11istage\startCD\Disk1\rapidwiz\jlib\acc.jar;E:\11istage\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;E:\11istage\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;E:\11istage\startCD\Disk1\rapidwiz\jlib\netcfg.jar;E:\11istage\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;E:\11istage\startCD\Disk1\rapidwiz\jlib\java oracle.apps.ad.autoconfig.InstantiateFile -e F:\oracle\proddb\9.2.0\appsutil\PROD_oracle.xml -d F:\oracle\proddb\9.2.0\appsutil\template\addbtmpl.drv -pwd APPS -log F:\oracle\proddb\9.2.0\appsutil\log\PROD_oracle\installdbf.log -verbose
D:\DOCUME~1\oracle\LOCALS~1\Temp>if 2 == 0 goto :CFG_OK
D:\DOCUME~1\oracle\LOCALS~1\Temp>echo "Unable to complete Instance Configuration"
"Unable to complete Instance Configuration"
D:\DOCUME~1\oracle\LOCALS~1\Temp>if "" == "TRUE" goto :CFG_OK
There was an error while running the command - F:\oracle\proddb\9.2.0\temp\PROD_oracle\adrundb.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
Executing script in InstantiateFile:
F:\oracle\proddb\9.2.0\appsutil\bin\ora8iinf.cmd
script returned:
ECHO is off.
ECHO is off.
Wed 08/10/2005 04:22 PM
LSNRCTL for 32-bit Windows: Version 9.2.0.5.0 - Production on 10-AUG-2005 16:22:47
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPROD))
The command completed successfully
adora8iinf.cmd exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Executing script in InstantiateFile:
F:\oracle\proddb\9.2.0\appsutil\install\PROD_oracle\adsvdlsn.cmd
script returned:
ECHO is off.
ECHO is off.
Wed 08/10/2005 04:22 PM
OpenService failed
ECHO is off.
The log information will be written to
"F:\oracle\proddb\9.2.0\appsutil\log\PROD_oracle\adsvdlsn.txt"
ECHO is off.
ECHO is off.
ECHO is off.
Wed 08/10/2005 04:23 PM
ECHO is off.
ECHO is off.
Wed 08/10/2005 04:23 PM
PROD_oracle.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : F:\oracle\proddb\9.2.0
LOCAL : PROD
ORACLE_SID :
PATH : F:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;F:\oracle\proddb\9.2.0\bin;F:\oracle\proddb\9.2.0\jre\1.4.2\bin;F:\oracle\proddb\9.2.0\jre\1.4.2\bin;E:\11istage\startCD\Disk1\rapidwiz\unzip\NT;D:\MKS\bin;D:\MKS\bin\X11;D:\MKS\mksnt;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem
LD_LIBRARY_PATH : F:\oracle\proddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"F:\oracle\proddb\9.2.0\appsutil\log\PROD_oracle\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process PROD ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 9.2.0.5.0 - Production on 10-AUG-2005 16:23:08
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPROD))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=oracle)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.5.0 - Production on 10-AUG-2005 16:23:09
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
Failed to open service <OraclePROD_db920_RDBMSTNSListenerPROD>, error 1060.
TNSLSNR for 32-bit Windows: Version 9.2.0.5.0 - Production
System parameter file is F:\oracle\proddb\9.2.0\network\admin\PROD_oracle\listener.ora
Log messages written to F:\oracle\proddb\9.2.0/network/admin\prod.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCPRODipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle.apps.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPROD))
STATUS of the LISTENER
Alias PROD
Version TNSLSNR for 32-bit Windows: Version 9.2.0.5.0 - Production
Start Date 10-AUG-2005 16:23:11
Uptime 0 days 0 hr. 0 min. 2 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File F:\oracle\proddb\9.2.0\network\admin\PROD_oracle\listener.ora
Listener Log File F:\oracle\proddb\9.2.0/network/admin\prod.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCPRODipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle.apps.com)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PROD" has 1 instance(s).
Instance "PROD", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.cmd exiting with status 0
ChangeServiceConfig succeeded
adsvdlsn.cmd exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
System error 1060 has occurred.
The specified service does not exist as an installed service.
.end err out.
Executing script in InstantiateFile:
F:\oracle\proddb\9.2.0\appsutil\install\PROD_oracle\afmkinit.cmd
script returned:
Wed 08/10/2005
04:23 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Executing script in InstantiateFile:
F:\oracle\proddb\9.2.0\appsutil\install\PROD_oracle\afdbprf.cmd
script returned:
Wed 08/10/2005
04:23 PM
ECHO is off.
ECHO is off.
Wed 08/10/2005 04:23 PM
PROD_oracle.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : F:\oracle\proddb\9.2.0"
" ORACLE_SID : "
" LOCAL : PROD"
" PATH : F:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;F:\oracle\proddb\9.2.0\bin;F:\oracle\proddb\9.2.0\jre\1.4.2\bin;F:\oracle\proddb\9.2.0\jre\1.4.2\bin;E:\11istage\startCD\Disk1\rapidwiz\unzip\NT;D:\MKS\bin;D:\MKS\bin\X11;D:\MKS\mksnt;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem"
" LD_LIBRARY_PATH : F:\oracle\proddb\9.2.0\lib"
"Running SQL script "
SQL*Plus: Release 9.2.0.5.0 - Production on Wed Aug 10 16:23:22 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.
Kindly Help.
Thanks

Hi,
Please can someone help me to get the Patch 4198954. Why don't you download it from MOS website? I believe no one is supposed to download the patch from MOS and send it to you by email as this violates Oracle support agreement policy.
Thanks,
Hussein

2032 error when connecting SQL server with Xcelsius

Hi,
Here are the short note about it
1)The dashboard is directly linked to database using aspx page
2)the data in the database refreshed using the aspx script.
3) we have a accordion menu and a 5 levels of filter and 10 charts
Problem Description
receiving 2032 error when the dashboard is kept idle for 5-10 min and if i select/change any option in the accordion menu or the filter i am receiving this error
Can anyone please help me out of this hell.

Itu2019s a security error message. Open your swf file and click with mouse right Button. Follow:
Settings/ Privacy/ Advanced/ Global Security Settings Panel/ Add Location.
Add your server address.
After select location, click u201CCloseu201D button and restart swf file.

PORTAL DOESN'T WORK (error:WWC-41439) after CHANGED DOMAIN NAME OF MACHINE.

machine transferred to other location and domain name got changed.I did following
1)changed the old domain to new domain name in jserv.properties file and also in the httpd.conf file.
2)I figured out that intable PORTAL30_SSO.WWSEC_ENABLER_CONFIG_INFO$,the value of column LSNR_TOKEN is= "old doamin "
and LS_LOGIN_URL is =
http://old.domain:7777/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
PLease let me know how I can change old domain values with new doamin in this table.I want to be sure that this change will not affect the old portal application.
PLease try to help resolve the issue ASAP.
Thanks

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by shahid mateen ([email protected]):
machine transferred to other location and domain name got changed.I did following
1)changed the old domain to new domain name in jserv.properties file and also in the httpd.conf file.
2)I figured out that intable PORTAL30_SSO.WWSEC_ENABLER_CONFIG_INFO$,the value of column LSNR_TOKEN is= "old doamin "
and LS_LOGIN_URL is =
http://old.domain:7777/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
PLease let me know how I can change old domain values with new doamin in this table.I want to be sure that this change will not affect the old portal application.
PLease try to help resolve the issue ASAP.
Thanks<HR></BLOCKQUOTE>
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>my concern is I have a portal application which was pointing to old domain and I don't want to lose this application(content area,page,style etc).If I run the ssodatan ,then it will change the content in the table wsec_enabler_config_info$.Please let me know if still it would point to old portal application.<HR></BLOCKQUOTE>

ERROR: WWC-41439 ssodatan.cmd

Oh my word! I have read so many responses to this error. In
most, I have seen suggestions setting ORACLE_HOME to the Oracle
home for 9iAS, not your Oracle DB's home. As soon as I changed
it from my 9iAS home to the DB's home... it worked!
Regarding the bat file I mentioned previously. I put the
following script into a text file I named myssodatan.bat in the
same folder as ssodatan.cmd
C:\oracle\iSuites\portal30\admin\plsql
Of course change to your drive letters, paths, etc. And the
ORACLE_SID and "-c orcl" needs to reflect your DB name. If you
are using port 80 and 443, this should be okay. If not, don't
forget to use the port number after the .net in the script below.
Exp: http://yourhostname.yourdomainname.net:80/pls/portal30/
(everything after ssodatan.cmd is on one line)
Hope this helps out ...
set ORACLE_HOME=c:\oracle\ora81
set ORACLE_SID=orcl
ssodatan.cmd -w
http://yourhostname.yourdomainname.net/pls/portal30/ -l
http://yourhostname.yourdomainname.net/pls/portal30_sso/ -s
portal30 -p portal30 -o portal30_sso -d portal30_sso -e
portal30_sso_ps -c orcl

Alexandra. -
I edited the httpd.conf and replaced the hostname in uppercase to lowercase and everyhing works now !!. Appreciating your reply.
kp -
My 9iAS installation is in NT.
Thanks guys !!
Jayesh Mehta

Error in log file (WWC-41439)

Hi,
When i installed Oracle Portal, i had the error WWc-41439 when i tried log in Oracle Portal. I revised the log file and i saw the following error.(I have isntalled Oracle Portal 3.0., Oracle Database 8.1.7 on windows NT).
STEP 24 : Installing SSO packages to public
INSTALL_ACTION : installSSOLayer()..\..\bin\sqlplus portal30_sso/portal30_sso@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=or8i))) @..\..\portal30\admin\plsql\sso\ssoinsg.sql
STEP 25 : Associating Login Server & Oracle Portal
INSTALL_ACTION :assocNewLoginServer: Portal Url Prefix: http://pablo/pls/portal30/
INSTALL_ACTION :assocNewLoginServer: SSO URL Prefix: http://pablo/pls/portal30_sso/
INSTALL_ACTION : assocNewLoginServer: ..\..\bin\sqlplus portal30_sso/portal30_sso@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=or8i))) @..\..\portal30\admin\plsql\sso\ssoseedl.sql portal30 http://pablo/pls/portal30/ portal30_sso http://pablo/pls/portal30_sso/ NO
INSTALL_ACTION : assocNewLoginServer: ..\..\bin\sqlplus portal30_sso/portal30_sso@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=or8i))) @..\..\portal30\admin\plsql\sso\ssoinsgp.sql portal30
INSTALL_ACTION : assocNewLoginServer:..\..\bin\sqlplus portal30/portal30@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=or8i))) @..\..\portal30\admin\plsql\sso\ssoseedw.sql portal30 portal30_sso http://pablo/pls/portal30_sso/ http://pablo/pls/portal30/
INSTALL_ACTION : STEP 19 : assocNewLoginServer:..\..\bin\sqlplus portal30/portal30@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=or8i))) @..\..\portal30\admin\plsql\wwc\secpsr.sql
INSTALL_ACTION : STEP 19 : assocNewLoginServer:..\..\bin\sqlplus portal30/portal30@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=or8i))) @..\..\portal30\admin\plsql\wwc\secps.sql portal30_sso_PS N N N N
INSTALL_ACTION : assocNewLoginServer:..\..\bin\sqlplus portal30_sso/portal30_sso@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=or8i))) @..\..\portal30\admin\plsql\sso\ssoinsrp.sql portal30
INSTALL_ACTION : assocNewLoginServer:..\..\bin\sqlplus portal30_sso/portal30_sso@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=or8i))) @..\..\portal30\admin\plsql\sso\ssoseedu.sql portal30
Installing and running diagnostics
INSTALL_ACTION:installDiagnostics() : ..\..\bin\loadjava -resolve -verbose -thin -user portal30/portal30@localhost:1521:or8i ..\..\portal30\admin\plsql\wwc\Diagnose.class
C:\ORACLE\iSuites\assistants\opca>REM
C:\ORACLE\iSuites\assistants\opca>REM $Header: runljava.bat@@/main/3 \
C:\ORACLE\iSuites\assistants\opca>REM Checked in on Fri Nov 17 15:32:36 PST 2000 by meoropez \
C:\ORACLE\iSuites\assistants\opca>REM Copyright (c) 2000 by Oracle Corporation. All Rights Reserved. \
C:\ORACLE\iSuites\assistants\opca>REM $
C:\ORACLE\iSuites\assistants\opca>REM
C:\ORACLE\iSuites\assistants\opca>Rem For running the Loadjava from the Configuration Assistant.
C:\ORACLE\iSuites\assistants\opca>..\..\bin\loadjava -resolve -verbose -thin -user portal30/portal30@localhost:1521:or8i ..\..\portal30\admin\plsql\wwc\Diagnose.class
INSTALL_ACTION : Running Diagnostics ..\..\bin\sqlplus portal30/portal30@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SID=or8i))) @..\..\portal30\admin\plsql\wwc\secdiag.sql
SQL*Plus: Release 8.1.7.0.0 - Production on Dom Abr 20 20:23:37 2003
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Conectado a:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Creating Table 'wwsec_diagnostic$'
Creating Sequence 'wwsec_diagnostic_seq'
Diagnostics Report v 1.01: Oracle Portal v 3.0.9.8.0
As of 20-Abr-2003 20:23:41 Schema Name: PORTAL30 SSO Schema Name: portal30_sso
Proxy Server Settings:
HTTP Server:
HTTP Server Port:
No Proxy Servers for Domains beginning with:
URL Connection Time-Out (seconds):
PORTAL30.wwsec_enabler_config_info$
Login Server URL : http://pablo/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
DAD : portal30_sso
Host connection : *** FAILED ***
Unable to find the Schema Name for the Login Server
Recommendations:
Please check the DAD settings for the Login Server
Desconectado de Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
INSTALL_ACTION : End of Installation.
How i resolve the problem?
Is there somebody in the same situacion?
Thank you

Did you promoted/demoted a server? ( like from consumer to master , master to consumer , hub to consumer/master OR disabled replication and re-enabled with another unique ID and recreated replication agreements again?
IF YES, find out the current Unique ID in all the related server and delete the old serverIDs in the nsslapd-rererral.
Also the error will tell you for which server it is trying to update the duplicate entry. Mostly , that entry will be the old value as I explained before.
I have seen this before and mostly by doing above it gets corrected. I recommend that you should think before doing it.
In any case dont forget to update us since this is a tricky situation to me.
-Kunal

Static IP-ed server with Airport Extreme 802.11ac

Howdy, y'all, In support of an app for remote users, we wanna expose a Win server using a static IP from our cable provider. The ISP has provided us with the static IPs, DNS IPs and a gateway IP. At the moment, the Win server is on a subnet routed by our new Airport Extreme 802.11ac receiving a reserved IP. If I configure the Win server with the static IP settings from the ISP, there's no Internet connectivity because the gateway IP is a different subnet. When I connect the Win server directly to the cable modem and bypass the Airport Extreme, the Win server has Internet connectivity. I suspect that I'll hafta use a separate switch between the cable modem and the Airport Extreme for the Win server. I think that we'll then have departmental Wi-Fi routed by the Airport Extreme. Any other suggestions? Thanks much.

Do you only have a single IP??
If so you cannot give that IP to the win server.. then you have no other network connection.. or internet from other clients.
But you can simply put the Win server with a static LAN ip set via dhcp reservations and then set the win server as the default host.. all packet incoming to the public IP are then passed to the Win Server.
DHCP reservation on the network tab of the airport utility.
Default host is under Network options.
You will still use the AE as main router and set wan to either dhcp which should work fine or the static IP.

I got the following error when I try to logon to oracle portal.WWC-41439:

Hi,
I got WWC-41439 error.Message is "You can't logon becuase there is no configuration information stored in ranabler confoguration table.
Any solution?
Regards,
TLN Reddy.

I got WWC-41439 error.Message is "You cannot login because there is no configuration information stored in the enabler configuration table. (WWC-41439)"I was having a similar problem. Assuming you are using R2 (really a 1.0 product - thanks marketing) here is what was going on in my case.
I have Infrastructure on host_01.domainName and Portal on host_01.domainName (what Oracle calls the "Mid_Tier" even though the Portal Installation took place on host_02).
Here is the error and the solution:
If I goto http://host_02.domainName:7778/pls/orasso/orasso.home which is the "Access Partner Applications" page and then try to login - get the WWC-41439 error just like you.
If you'll notice the login URL is
http://host_02.domainName:7777/pls/orasso/ORASSO.wwsec_app_priv.login?p_requested_url=http%3A%2F%2Fhost_02.domainName%3A7777%2Fpls%2Forasso%2FORASSO.home&p_cancel_url=http%3A%2F%2Fhost_02.domainName%3A7777%2Fpls%2Forasso%2FORASSO.home
Now if you click on the "The SSO Server (orasso)" hyperlink and then click-on the login URL - the url will be
http://host_01.domainName:7777/pls/orasso/ORASSO.wwsec_app_priv.login?p_requested_url=http%3A%2F%2Fhost_01.domainName%3A7777%2Fpls%2Forasso%2FORASSO.home&p_cancel_url=http%3A%2F%2Fhost_01.domainName%3A7777%2Fpls%2Forasso%2FORASSO.home
This works because ORASSO is a schema located in the databse on host_01.domainName.
Bill G...

Server error in printing in server using crystal report 2008 with VS2008

Hi,
We are using Crystal report 2008 in VS 2008. Everything working fine in local but when we deployed it in the server we are getting the below while print the report.
"An error occurred on the server. Printing will be stopped. Would you like to view the error information"
Anyhow the report is printing but I don't know why this error is occur and how to stop this. I had installed the CR runtime in the server. I dont know what is going wrong. The same we tested locally in a non crystal report installed PC.
Please help me to get rid out of this error.
Thanks
Natraj

Soemthing strange going on here.
Typically this Integrated vs Classic is an issue with images where Classic uses web.config tags between <system.web><httpHandlers><u2026 crystalimagehandler../></httphandlers></system.web>
Integrated uses tags between <system.webserver>u2026<handlers><..crystalimagehandler/></handlers></system.webserver>
Not sure why this would affect printing. Do you have tags that specifying where to download the printcontrol from? On the other hand, I would think that if images had anything to do with it, then you'd get red Xs when viewing. As far as I know, the printcontrol.cab doesnu2019t need to be specified in the <system.webserver> tags.
This one may be best resolved over the phone. Phone support can be obtained here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Ludek

Error WWC-41439 on server with ip static

Similar Messages

Maybe you are looking for