Error : you are not assigned to a position

Hi Seniors,
I am getting below error though I have assigned proper position in R/3 and also I have linked this with communication info type 105 using PA30. I am not able to see my data in portal.
Please help...
Regards,
Ritu

Hi Ranjith/ Luke,
I re-checked the OM- PA configuration and again try to maintain A012 relationship as well... but again the same error ... " You are not assigned to a position "
Please help
Regards,
Ritu

Similar Messages

Incident management error: You are not assigned a Business Partner

Hi
I am facing a problem while creating message as below
error: You are not assigned a Business Partner
I created the BP. which has clear identification too.
Even this BP is maintained as Employee too.
Expecting ur valuable suggestions.
Regards,
Siva

Hi
Was this issue ever resolved?
I have the same problem.
I have business partners, also created as employees with their user id held in the Identification tab of the employee view in BP.
In the business partner Identification tab, they have the system ID>Installation No>client>user id maintained
When I go into solman_workcenter I see the message 'you are not assigned a business partner' and I cannot see any of the tickets assigned to me.
Has anyone had the same issue and resolved it?
Thanks for your help.
Ashley

ERROR: "You are not assigned to a role" in BEx

Hi,
I have a user BEXUSER. In PFCG, I have assigned this user to a role ZR_USER_ROLE.
However, when I tried to open a query in BEx Anlyzer through Open > Workbooks > Roles toolbar, I could not find any workbooks assigned to this user.
Next, I tried to open a query using Open > Queries toolbar, I chose a query and tried to click Enter in Role icon. However, I am prompted with a message saying "You are not assigned to a role".
How is this possible when I have already assigned this user to a role. I have checked PFCG and confirmed that the particular role contains this user. Can someone explain about this?
Thanks

I am getting this exact same error, and the values that I have set in my query developer's job role are the following :
S_USER_AGR
ACTIVITY = 01, 02, 06, 22
ROLE NAME = {list of roles that the user should be able to save queries to}
S_USER_TCD
TRANSACTION CODE = RRMX
The user still receives the "you are not assigned to a role" error message when pressing the "save to role" button for a workbook.
In the ST01 authorizations trace, I see that the user is FAILING the authorization check for S_USER_AGR, but is failing the check for role names that he / she not supposed to modify.
So those failures are good, but they seem to prevent from saving the workbook to any role ...
How can it be setup so that the user can save workbooks to roles that were inteded to be saved to, without getting the "your are not assigned to a role" error when trying ?

Error: You are not one of the possible agents of task 'WS99900032'

Hi frnds,
I have copied the std leave request workflow WS12300111 into WS99900032 and assigned in the SPRO setting. The approvers are determined using the workflow rule (PFAC) and its not determined from Org Management. But when i tried to apply leave, its throwing me the error You are not one of the possible agents of task 'WS99900032'.
Can anyone give me solution to solve it?
thanks,
Suganya.

You are not one of the possible agents of task 'WS99900032'
You need to refresh the organizational environment and then execute the workitem
1. First make the workflow tempalte as General task and then
Goto PFTC ---> enter the workflow tempalte number by selecting workflow template ---> open in display mode and on menu Addtional Data ---> agent assignment ---> Maintian ---> select General task
2. Goto SBWP -
> Seetings -
>workflow settings -
> refresh ornozational environment and then try to execute the workitem

Error: You are not a receiver of the work item in Leave Request Deletion

Hi All,
We are using customized leave request workflow which is the copy of standard leave request workflow.
All tasks are assigned as general tasks and assigned in SWFVISU.
But the employees are unable to delete the leave request with Sent status.
Scenario:
Employee applies leave.
Now when the employee tries to delete / cancel the leave request before approval (Status is SENT), the employee is getting the error
"You are not a receiver of the work item".
This issue is happening for only the leaves which are in "SENT" status and though the employee is able to delete the "REJECTED" leave requests. The employee is also able to change / modify the leave requests without an issue.
We are on EHP 7 with SP level 22 and running this on Portal 740.
I have gone through the threads related to this issue but did not get any success.
Please let me know if I am missing something that can resolve the issue .
Regards,
Anurag

Hi Sid,
As I mentioned above, we are on EHP 7 with SP 22 and hence the above note 1066288 does not apply in our case.
Moreover, we're using WDA based application and the above note seems to be the one for XSS based on WDJ.
Regards,
Anurag

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
dscl . read /Users/<username>
(where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
(where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

ESS : medical claims : error you are not authorised

Hi all ,
we have applied support pack all the way SAPKE47032 to SAPKE47070 ..,
ESS is working fine except medical claims i got error
" you are not authorised to view "
pl help .
anu

Hi Anu,
Please check the missing authorization in su53
Hope you are using the composite role SAP_EMPLOYEE_ERP for the employee
Thanks and Regards
Reshma

Error: You are not a receiver of the work item in Leave Request Approval

Hi all,
I have copied the standard leave request workflow and done the customization as per my requirement.
Agent assignment for all the tasks are General Tasks.
We are facing below error when we are trying to approve the leave request from MSS UWL.
"You are not a receiver of the work item.".
This started happening after implementing the note 1501377 which is for clearing the approved leave request
workitems from UWL .
i have gone through the threads related to this issue and tried given solution but no success .
Please let me know if anything else is missing since its happening after implementing the note.
Thanks,
Santosh

Able to resolve the issue :-).
i was using Fork since my workflow is a two level process.
so the workflow was travelling to both branches one was in ready state another was in waiting state(48hours deadline)
having different agents.
i debugged the 1501377 note code when leave is approved it is looking at last workitem of the request which is waiting state workitem in my case and I was trying to approve the leave from user who is in ready state. then it throws the error.
So i have changed the design of workflow. i have done below things for two level process.
i will have requested end for approval task with outcome in that branch i kept second level approver. My questions
1) i am planning to do write below code to post the entries into infotypes after approval by managers. is it ok or any suggestions?
   CALL METHOD cl_pt_arq_processor=>post
      EXPORTING
        im_request =
      RECEIVING
        ret_value = retrun
2) how to complete the WF if the 1st manager misses the deadline and WF goes to second manager?
Please let me know.
Thanks,
Santosh

UWL workitem error: you are not a receiver of the work item

I have created a workflow with 2 decision steps. When testing the workflow through the SAP inbox (SAP Business Workplace), when the first agent approve the workitem, it is forwarded to the second agent who can also approve or refuse the workitem, which then ends the workflow.
When testing the same process in the portal UWL, the first agent receive the workitem and approve it. The second agent receive then the workitem, but when I open it to approve it, I have this error message: "you are not receiver of the workitem" !!
How come I am the right receiver of the workitem in R/3 and not in the portal ? We are using a CUA so users in the portal and R/3 are the same, the webflow connector is working, SSO has been set up.
Thanks in advance for your help.
Thibault

I have registered a UserDecisionHandler to display the task. Now the error message is gone and I am the receiver of the workitem. But the new problem is that when I try to approve or reject the workitem, I get this new error message:
Function is obsolete (successor: SAP_WAPI_DECISION_COMPLETE). It looks like the handler is trying to use a former function but I have no idea where I can find which function is called to process the decision.
Any ideas ?
Thanks in advance for your help.
Thibault

Upload to ftp host - 503 error 'you are not logged in'

Really struggling with this one - my upload (to united hosting server) crashes at approx 60% giving the above reason. The site files are in total 232mb (big site) and my broad band upload speed is shocking (approx 30kb up...... yes kb!)
will the ftp 'time out'?
My other sites are loading fine but having problems with www.brookstreetschool.co.uk. I'd added somewhere in the region of 10 new slideshows that had quite a few images in them but they were all web optimised - before that the site was fine, now it won't upload - tried 4 times now over 2 nights.
Any help or advice would be gratefully recieved.
Alan

Looks like due to the slow upload speed (or higher latency), the FTP connection to your third party web host is breaking eventually logging you out (disconnecting from the FTP server) and resulting in a 503 (Service unavailable) error.
http://pcsupport.about.com/od/findbyerrormessage/a/503error.htm
Are you able to test this on a network with faster/stable upload speed possibly isolating the issue to your network? Or are you able to export the site as HTML and upload using a third party FTP client? Do take a look at the above article as well for common fixes to try in such cases.
Thanks,
Vinayak

Error: "You are not connected to a company" in deployment site

This error only occours in the deployment site, in development I have no such error.
In the deployment site all the software is installed in the same machine.
This is a WebService developed internally with VStudio .NET,in c# , and we are using SAP BO to connect to DB. In my machine it works just fine.
Any one can help?

Thanks any way,
I solved the problem by accessing then "Component Services", "Computers", on "My Computer" righ click on properties, then on the tab "Default Properties" I've selected "Enable COM Internet Services on this computer", and... on the "COM Security" I've granted access to "everyone" on both permissions settings.
Now its working just fine.

You are not authorized to logon to the target system (error code 1)

Dear Expert,
I met some problems that 'You are not authorized to logon to the target system (error code 1)' when I tried to do the auth. testing for RFC SM_CLNT<SID>_TRUSTED in satellite system.
Following SAP note 128447, I recreated the RFCs in SMSY in solution manager for satellite system using existing user.
It was still error ''You are not authorized to logon to the target system (error code 1)'.
In SMSY in solman, I checked the RFCs connection which I recreated using RFC wizard, they are ok(green).
I have already maintain the auth. obj S_RFCACL for user who is running this.
So, I am confused what authorization I did not maintain in user? Please help me out!
Thanks a lot!
Br,
Lucy
Edited by: lucy YANG on Mar 19, 2011 6:59 AM
Edited by: lucy YANG on Mar 19, 2011 7:01 AM

Hello Lucy,
The error is pretty clear that the calling system is not a trusted system so I don't think you should bother with an authorization trace at this time, because authorizations is not quite the issue. The calling system is NOT a trusted system, authorizations or not.
Please refer to SAP Note 128447 Trusted/Trusting systems
The error is listed there:
Authorization errors that occur when using an RFC destination for which
the 'Trusted Systems' indicator is set are documented with the following
message:
"No authorization to log on as a trusted system (Trusted RC = #)."
In this case, the trusted return code # (# = 0, 1, 2, 3) has the
following relevance:
1 The calling system is not a trusted system, or the
 security key for the system is invalid.
 Solution: Recreate the trusted system (see
 documentation).
These are the links the Note provides for the documentation:
[http://help.sap.com
/saphelp_nw04/helpdata/en/22/042671488911d189490000e829fbbd/frameset.htm
] in accordance with the documentation
[http://help.sap.com/
saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm].
The Note states to recreate the Trusted system according to the Documentation (links above)
This is all in the Note. Please follow the Note to reslve this known error.
Regards,
Paul

You are not a receiver of the work item in ESS Leave

Hi,
We are using standard ESS leave application in our portal, where employee can raise leave and his manager can approve/reject his leave. But I want in case manager rejects the leave, the rejected leave should not come into MSS UWL of employee, we will send a mail to employee and he can again login to ESS leave application and where he will see the rejected leave and he can re apply/change/delete the rejected leave. We do not want rejected leave to come in UWL of employee as a work item.
As of now when manager rejects the leave rejected leave of an employee , it is coming in UWL of the employee which we do not want, so what we did, we went to standard leave work flow template WS12300111, in that we double clicked on Task (TS12300116, Process Request by Employee) and in that we clicked on agent assignment icon and than we clicked on attribute and we selected General forwarding not allowed radio button, by default general task radio button was selected.
After selecting General forwarding not allowed radio button, even when manager rejects employee leave, rejected leave is not coming in UWL of employee which we want exactly, but another error is coming when employee goes to ESS leave application again and change or delete this rejected leave he is getting the error You are not a receiver of the work item .
But if we select general task radio button in agent assignment in work flow , than eveything is working fine but employee is getting rejected leave in his UWL, that we do not want at all, so why after selecting different radio button this error is coming ?
Why employee is getting this error, why employee can not reapply/change his rejected leave. Is this portal error OR workflow error OR HR configuration error and what is the solution for this..

If you need this option then you need to change the WF Task.
General Forwarding Not Allowed
This indicator enables you to determine that work items for this task can only be forwarded to users who are agents for the task.
If this indicator is not set, a work item for this task can be forwarded to all users.
The best way to take care of User
Forwaring authorization is the Task Classification (PFTC -> Additional
Data -> Classification). Classify tasks with General Forwarding Not
allowed, will give you the oppotunity to let the user allow to forward
items JUST to the Possible Agents Assigned to the task
(Additional Data -> Agent Assingment -> Maintain)...
Clear that everything depends on How you have developed your workflows
definitions. In that cases the best think to do is
create Different Tasks definition (TSxxxxxx) and let they start
depending on Company Code (That can be driven via Conditions steps in
the workjflow definition, for example). This will allow you to define
Just the responsible Agents per each task, depending on the Companny
Code. This definitively Resolve the Forwarding frelated Question.

ESS- Leave : You are not one of the possible agent for the task ws9021212?

Hi ,
I have copied the standard workflow template wa12300111 and assigned the new template in the customizing. When i apply leave from ESS working time , it says an error " You are not one of the possible agent for the task ws9021212? " .
The similar kind of Error i have solved before in by making the workflow as GENERAL TASK in PFTC as follows.
PFTC -> Choose "Workflow Template" from the drop down -> Enter the workflow template id "ws9021212" in the text box -> now click on "change" button -> Now goto the menu addional data -> agent assignment -> maintain -> select the task text -> and set it as general task.
i have cleared the buffer also!
BUT STILL I AM GETTING THE ERROR ?
Please help me !
Richard A

hi Richard
Try to do this way. IN the workflow builder there is a button with hat. that is basic data. click on that and it will go to another screen and u can find a apple button that is agent assignment for a task click that.
It will open maintain agent assignment screen. click the text below that and click the attribute button and click the genral task. i think this will solve ur issue.
If helpful kindly reward points
Regards
vijay

You are not authorized to start the administration workset - GP

I'm trying to launch the Administration Workset for GPs, to release objects from the "Life and Work Events" GPs from ESS, assigned GP Administrator to user and get the error:
"You are not authorized to start the administration workset"
Also tried adding virtually all GP and CAF roles to used with no luck, any ideas??
Max points to the correct answer =)

try to add a role called CAFUIADMIN and provide your user with this role. Otherwise all you need is the GP Adminstrator role.
hope that helps
Abdul

Error : you are not assigned to a position

Similar Messages

Maybe you are looking for