Errors 105 and 106
I'm getting an increasing number of 105 and 106 errors from my external HD. I have it hooked up to the Performa by SCSI. The purpose of the external HD is backup. For a couple of years now my Retrospect 4.0 backup file has failed with one or the other error when the file got too big, say, after the second or third backup. Tonight I tried something different. The external HD is quite a bit bigger than the main, internal HD (which is partitioned), and I tried just dragging one partition's icon over to the external HD. The copying processs stopped after transferring maybe a fourth of the partition. (I'm guessing that partition currently holds 80 megs or so.) I found that the transfer could work if I dragged individual folders over, but that's slow. Does anyone have any guesses as to why transferring large amounts of data across SCSI causes a stall? TIA
I haven't had time to run Disk Test. But here is a sample log from an attempted back-up:
+ Executing Immediate Backup at 4/9/10 4:34 PM
To StorageSet StorageSet HD…
- 4/9/10 4:34:52 PM: Copying a) office
Trouble writing: “1-StorageSet HD” (15961600), error 206 (drive
reported a failure: dirty heads, bad media, etc.)
4/9/10 4:35:31 PM: Comparing a) office
4/9/10 4:35:54 PM: 1 execution errors
Completed: 256 files, 15.2 MB
Performance: 30.3 MB/minute (24.6 copy, 39.5 compare)
Duration: 00:01:02 (00:00:02 idle/loading/preparing)
+ Executing Recatalog at 4/9/10 4:36 PM
To StorageSet StorageSet HD…
Bad StorageSet Header found (0xffffffff at 15,589)
4/9/10 4:36:53 PM: 1 execution errors
Duration: 00:00:03
+ Executing Recatalog at 4/9/10 4:41 PM
To StorageSet StorageSet HD…
Device trouble: “1-StorageSet HD”, error 105 (unexpected end of data)
4/9/10 4:41:14 PM: 1 execution errors
Duration: 00:00:02
+ Executing Recatalog at 4/9/10 4:41 PM
To StorageSet StorageSet HD…
Device trouble: “1-StorageSet HD”, error 105 (unexpected end of data)
4/9/10 4:41:23 PM: 1 execution errors
Duration: 00:00:02
Does any of that look diagnostic? Thanks.
Similar Messages
-
I am trying to download photoshop elements 11, but I received error 105 - why?
I have Windows Vista and I am trying to download photoshop elements 11, but I received error 105 and the assistant wants to download PE 10. Why is this?
Please try completing solution 1 in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio n_1.
-
Hi expert,
i am getting below error in goldengate due to mount point full and i released the space and still the same error for all gg processes. i can see the *cpe cpr file become 0 bytes. so i deleted and re added the extract and repliacat and while adding the replcat i used add replicat checkpoint table because of that multiple entries of same replicat came in checkpoint table . my checkpoint details also present in ./GLOBALS. now my doubt is if add replicate with mentioning checkpoint table name will duplicate entry will be created or what is the work around for this.
MANAGER RUNNING
Invalid checkpoint for EXTRACT qqqq (error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXX)
Invalid checkpoint for EXTRACT qqq(error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXXX)
Invalid checkpoint for REPLICAT qqq (error 105, Could not read full block (2048 bytes) from checkpoint file XXXXXXXXXXX)Hi Kariyath
Increase the page size of your windows machine.Check for the recommanded page size.Remember that the recommanded page size should be the lower limit.If you have any issue feel free to ask.Your prob will be solved
Award suitable points -
Add-on connection error (-105) Access to company database is not permitted
Good day,
One of our clients have upgraded to 8.8 PL 11 (from 2007A PL 41).
Somehow the SBO-Common became corrupt and SAP suggested that we reinstall the SBO-Common.
The problem is that now the add-on (developed by us) is not connecting.
The add-on connects to UI API and DI API, but when trying to connect to the company with SAPbobsCOM.Company, an error is returned (error code: -105).
I am also confused about what the error actually is, bacause according to the SDK Help file, error -105 is "The observer.dll init has failed.", but the error message returned by the add-on is "Access to company database is not permitted; log on to SAP Business One and sign end user license agreement (EULA)"
I have tried resigning the EULA, but no success.
I have also tried deleting the content of the %temp%\SM_OBS_DLL, as suggested in another post.
The version of the OBServer.dll is 8.80.229.0 - I believe that this is the correct version for 8.8 PL 11?
Please advise.
Kind regards,
RikardGood day all,
My apologies.
I have discovered what the problem was - and it was me.
I did not realise that the connection I was making was not to the same database that I was connected to.
Therefore, I had to log onto the other database and sign the EULA.
The error explained exactly what I needed to do, but I wasn't paying attention.
Regards,
Rikard -
Error 105 - while compiling with adt
I am getting this error "error 105: application.iPhone.InfoAdditions contains an invalid value"
while packaging my application with adt for ios.
The command I used is this "c:\Program Files\Adobe\Adobe Flash CS5.5\AIR2.6\bin\adt" -package -target ipa-ad-hoc -provisioning-profile VCPDevelopmentProvProfile.mobileprovision -storetype pkcs12 -keystore VCP.p12 -storepass PASSWORD vcp.ipa TestAir-app.xml TestAir.swf
while the contents of TestAir-app.xml are as mentioned below. Can someone please point out the problem as this is really hampering our work (Thanks in advance).
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<application xmlns="http://ns.adobe.com/air/application/13.0">
<id>in.co.canon.coe.vcp</id>
<versionNumber>1.0</versionNumber>
<filename>TestAir</filename>
<description/>
<!-- To localize the description, use the following format for the description element.<description><text xml:lang="en">English App description goes here</text><text xml:lang="fr">French App description goes here</text><text xml:lang="ja">Japanese App description goes here</text></description>-->
<name>TestAir</name>
<!-- To localize the name, use the following format for the name element.<name><text xml:lang="en">English App name goes here</text><text xml:lang="fr">French App name goes here</text><text xml:lang="ja">Japanese App name goes here</text></name>-->
<copyright/>
<initialWindow>
<content>TestAir.swf</content>
<systemChrome>standard</systemChrome>
<transparent>false</transparent>
<visible>true</visible>
<fullScreen>false</fullScreen>
<aspectRatio>landscape</aspectRatio>
<renderMode>auto</renderMode>
<autoOrients>false</autoOrients></initialWindow>
<icon/>
<customUpdateUI>false</customUpdateUI>
<allowBrowserInvocation>false</allowBrowserInvocation>
<iPhone>
<InfoAdditions>
<![CDATA[<key>UIDeviceFamily</key><array><string>1</string><string>2</string></array>]]>
</InfoAdditions>
<requestedDisplayResolution>standard</requestedDisplayResolution>
</iPhone>
</application>
Thanks and Regards,
NiteshHi,
Thank you for reply.
I provide files.
http://quq.jp/fb_project.zip
It's a flash builder project files. included swf,xml.
error screen shot: -
Error 105 on publishing - what does it mean?
I'm getting this in the publish logs when trying to publish a page:
EXCEPTION: Asset save failed for Content_A:1349711142754,1349711142764,1349711142734,1349711142774, Error saving an asset Asset.SaveAll : com.openmarket.basic.interfaces.AssetException: number-105 (No description provided)
what does error-105 mean? is there some list of error codes with their descriptions?Apparently it was due to inconsistent definitions between editorial and delivery server.
Cleaned out delivery server, publishing was fine after that. But it would be nice to find about the error codes. -
Error 105, download already in queue.
Error 105, download already in queue.
How do I clear the queue so I can start the download again.
This happened computer powered down half way through download. I powered it back up and tried to resume - did nothing (gave it an hour – zero progress on MB and % and no hard disk activity either).
Deleting the download folder and cookies did not help, still get the error that the download is in the queue – how do I clear the queue and start over.
Tried the direct download instructions and got an error that I do not have permission to do this.
Also tried typing in the question in the question field and it made me sign in and then presented me with an empty question box. ARRGGH.You can reset the download experience by completing solution 1 in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio n_1. I would recommend choosing the default location of your User folder to download the install files too.
Alternately you can try the directions again for initiating the direct download at http://forums.adobe.com/thread/981369. You will need to follow the directions exactly though or you will receive the access denied error. -
I have started to download CS6 Mater Collection but, Error 105 has came up. I have completed the trouble shooting solution 4 and 5, in the adobe assistant it will not let me click the pause or close buttons, when I try to download it again it says that I have already downloaded it and error 105. What should I try next?
Direct Download Links for Adobe Software
Mylenium -
WWhen I set up family sharing i did it with me as family organizer, but as my spouse is the organizer I had to leave the "family" I created and join his. But while setting it up an error occurred, and the screen went blank. Now I tried to join his family sharing again, and my phone keeps telling me I can't because accounts can only join families twice a year.
I Don't really want to wait 364 days from now, is there a way in which I can reset my accoint so I can join family sharing again?
Apple support doesn't have a solution for me yet!
KInd regardsThis morning I looked at my family sharing account again an IT WORKS NOW! Think Apple has done a reset to my account, though I'm not exactly sure why! So I hope it works for you guys as well!
-
My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes -
I am using action script 3. I have html codes from ccbill that I am trying to make work with flash. Here is the script I am trying to use:
import flash.net.URLRequest;
var url:String = 'http://www.lexiefyfe.com/ccbill9001/index.htm';
myButton.addEventListener(MouseEvent.CLICK, onOrderClick);
function onOrderClick():void
var request:URLRequest = new URLRequest(url);
try {
navigateToURL(request, '_blank');
} catch (e:Error) {
trace('An error occurred');
Here is the code from ccbill:
<A HREF="http://www.lexiefyfe.com/ccbill9001/index.htm"><img src="ccbutton.jpg"></A>
This is the error report I am getting:
Scene=photogallery, layer=buttons, frame=1, Line 1 Statement must appear within on handler
Scene=photogallery, layer=buttons, frame=1, Line 3 Statement must appear within on handler
Scene=photogallery, layer=buttons, frame=1, Line 5 Statement must appear within on handler
Scene=photogallery, layer=buttons, frame=1, Line 7 A type identifier is expected after the ':'.
Scene=photogallery, layer=buttons, frame=1, Line 9 The class or interface 'flash.net.URLRequest' could not be loaded.
Scene=photogallery, layer=buttons, frame=1, Line 7 Statement must appear within on handler
If anyone can help me with this issue I would be most grateful.
Thank you for any consideration,
ThomasYou have a mixture of things going on... AS3 code in an AS2 setting. Those are all AS2 error messages, and they are indicating you have placed the code on the buttons. To use that code, it must be placed on the timeline, and your Flash Publish Settings need to have AS3 specified instead of AS2. AS3 does not allow code to be placed on objects like AS2 does.
-
I have just bought an iPhone 5 and it won't sync to iTunes. It says it needs iTunes 10.7, which I have downloaded and installed. I still get the error message and looking at "about iTunes" it says 10.6.3. What do I do??
Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X -
i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!
Hello AlexCornejo,
Thanks for using Apple Support Communities.
The screen you're seeing on your iPhone indicates it is in recovery mode. Now since the device is not appearing in iTunes on your PC, first follow the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
After following those steps, you should be able to restore your iPhone.
Take care,
Alex H. -
Help. Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do? What does it mean? I bought Elements 10 at a retail store. It did work for a while.
Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?
I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.
Maybe you are looking for
-
Alerts for recurring events in iCal no longer display on iPhone after iOS5 upgrade
That pretty much says it. I have a daily meeting in my iCal, with two alarms set, one for 15 minutes before and one for 5 minutes before. The alerts no longer display on my phone after the upgrade. (They appear on my Mac no problem.) Has anyone e
-
Migration from Oracle OC4J to Weblogic 10.3 and CLOB ClassCastException
I am migrating a web application from Oracle OC4J to Weblogic 10.0.3. In this application there are number of java files which uses the following piece of code and I can't change that: oracle.sql.CLOB clob = (oracle.sql.CLOB)rs.getClob(columnNumber);
-
Error with CTC users at Solution Manager 7.1
Error during Inital Setup at Solution Manager 7.1 hello SAP Experts, I have an error during the Initial setup Solution manager 7.1 SPS3. I get it at SAP Solution Manager Configuration: System Preparation step 6.1 'Select SLD'. I filled host, port and
-
Why can't I download or update apps running IOS 8.1.1
help
-
Will DBMS_STATS impact the NCHAR in a table ?
will DBMS_STATS impact the NCHAR in a table ? few jobs running slow after DBMS_STATS gathered statistics, why its so?