Errors During sap 4.7 installation-kindly help

Hi friends,
I am getting 3 errors during sap 4.7 installation.kindly help.
i herewwith giving the error details:-
1. R/3 Basis System Initialization DB-Connect Failed, Return code 000256
2. R/3 Basis System: operating system call Recv failed error no. 10054
3. R/3 Basis System: Database connection Disconnected.
After i have strated the sap server(MMC) first it will goto yellow and then green and againg goes to yellow color. message and dispatcher turned to gray.
Pls help.your advise is considered very useful
Thanks and Regards,
willaim

William
What OS are you using please? (Windows I assume) On the surface, it sounds like a socket error. (i.e. the message server port is blocked by an existing application).
The dispatcher will fail as a result of the message server not being available. Would you check and post the contents of the 'dev_ms" file in the work directory? Also, contents of the dev_disp would be helpful here also.
Thanks,
Tim

Similar Messages

Error during sap r/3 installation at update databse statistics

Hi friends,
I am getting an error during sap r/3 installation almost at the last stage.
the error is at update database statistics.
my configuration is
os: windows 2000 server.
d/b: oracle 9i.
erp: sap 4.7 ee
During oracle installation stage the oui is asking for create a database, i am chechking it ok. Is that a problem ?.
I am sending the log file. Please can anybody help me, where i am going wrong-
The log file----
Click Browse and give location of export1, as shown in the bellow figure
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata4\drs620_5.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata4\drs620_5 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata5\drs620_6.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata5\drs620_6 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata5\drs620_7.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata5\drs620_7 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drs620_8.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drs620_8 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drs620_9.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drs620_9 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata6\drsusr_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata6\drsusr_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata2\roll_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata2\roll_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata3\temp_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata3\temp_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Creating directory D:\oracle\DRS\sapdata1\system_1.
INFO 2007-02-04 21:46:32
Creating file system node D:\oracle\DRS/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2007-02-04 21:46:32
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-02-04 21:46:33
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2007-02-04 21:46:34
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-02-04 21:46:35
Creating file c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 21:46:36
Creating file C:\oracle\ora90\database\initDRS.sap.
INFO 2007-02-04 21:46:37
Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/INITSID.DBA to: c:\oracle\ora90/database/initDRS.dba.
INFO 2007-02-04 21:46:37
Creating file c:\oracle\ora90\database\initDRS.dba.
INFO 2007-02-04 21:46:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:46:39
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-04 21:46:39
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 21:46:39
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-04 21:46:40
Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2007-02-04 21:46:45
See 'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2007-02-04 21:46:45
'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' returned with '0'.
INFO 2007-02-04 21:46:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:46:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 21:59:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:00:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:01:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:01:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:02:18
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:02:20
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:03:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:04:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:04:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:05:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:05:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:06:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:06:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:10
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:07:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:08:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:38
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:40
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:09:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:44
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-04 22:10:44
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-04 22:10:44
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-04 22:10:45
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-02-04 22:10:46
See 'c:\oracle\ora90/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-02-04 22:10:46
'c:\oracle\ora90/bin/lsnrctl stat' returned with '3'.
INFO 2007-02-04 22:10:46
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-02-04 22:10:48
See 'c:\oracle\ora90/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-02-04 22:10:48
'c:\oracle\ora90/bin/lsnrctl start' returned with '0'.
INFO 2007-02-04 22:10:48
Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2007-02-04 22:10:48
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2007-02-04 22:10:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
PHASE 2007-02-04 22:10:54
Database Load
INFO 2007-02-04 22:10:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:10:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:02
Task files created
INFO 2007-02-04 22:11:03
Command files created
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-04 22:11:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 00:06:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 03:43:19
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 04:55:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:17:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:39:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:45:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 05:57:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:00:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:03:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:05:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:07:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:08:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:09:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:24:46
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:24:46
Processes finished successfully
INFO 2007-02-05 06:26:23
Creating file C:\SAPinst ORACLE KERNEL\ddicora.sql.
INFO 2007-02-05 06:26:25
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:30
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:43
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-05 06:26:43
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
INFO 2007-02-05 06:26:43
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-02-05 06:26:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:55
Creating file C:\SAPinst ORACLE KERNEL\brconnect.log.
INFO 2007-02-05 06:26:55
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-02-05 06:26:55
See 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' output in 'C:\SAPinst ORACLE KERNEL\brconnect.log'.
ERROR 2007-02-05 06:26:55
MOS-01012 PROBLEM: 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' returned with '128' which is not a defined as a success code.
ERROR 2007-02-05 06:26:55
FJS-00012 Error when executing script.
kindly help me where i am going wrong.
Yours friendly,
Bharath.

Hi Andreas,
many thanks to you for the timely help.
a.)I want to know why there is an error at brconnect ? why is it returning an error code (128) at UPDATE DATABASE STATISTICS stage.
I have read in this forum itself that the UPDATE STATISTICS need not be suceesfully completed and we can edit database.r3s
" ..on the other hand you can easily invoke the update statistics after the installation has ended (succesfully!)...edit DATABASE.R3S (or the appropriate template file you are using) by changing the status=ERROR to status=OK...this will let you finish the installation..-GreetZ, AH."
I have searched for this file (database.r3s) in my system in vain Where can i find this file database.r3s?.
Have i done any configuration mistake at the pre-installation stage. I have installed Oracle 9.0 using setup.exe of oracle. should i use sapserver.cmd to install oracle?.I havent applied any patch for Oracle 9.0
Should I apply any patch just the same way we do for Oracle 8.1.x ?. If so, where can i get the patch for Oracle 9.0 .?.
b.) You said there should not be any spaces in file path (ex: C:/SAPinst ORACLE KERNEL/) . But I havent specified file path, the r/3 setup itself has created the directory path.
c.) I want to know one thing- should we create a database before installing r/3. When we are installing Oracle 8/9. x what are the components that we are installing?
Your friend,
Bharath.

Getting "The product key is not valid. INS00140" error during Crystal Report 2013 installation

We are getting “The product key is not valid. INS00140” error during Crystal Report 2013 installation. We are trying to install crystal report on Windows 7 64 bit OS.
Can anyone help?

What is CrystalReportsJava-2013? Where did this come from - download link? CD?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

HT2292 I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

You might find this article helpful: http://support.apple.com/kb/TS3694
It has the error range of 3000's which states
Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes.

Execution of Reports phase error during SAP EHP4 upgrade with EHPi

I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor

Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard

Import ABAP error during ECC 6.0 installation on Win2003 with Oracle

Dear friends,
I am trying to install ECC 6.0 IDES version on Windows 2003 server with oracle 10g. In fact I had tried few days before and I was getting the same error message. I had posted a separate thread for this and after few suggestions I have moved the sorce data to internald HDD which was earlier on external HDD. Secondly the page file only 4096MB and now I have changed it to 24GB. But still it is giving errors. Only thing is that I have changed the page file size after istalling Oracle, will this effect installation? or is this because of any files corrupted source HDD?
Kindly help me to solve this problem. I would be very much thankful to you. Here I am attaching DOKCLU.log; PCL2.log; sapinst.log; and import_monitor.java.log.
Please let me know if you need any further information.
- Ravinder.
============================================
Error log from DOKCLU.log is as below:
++++++++++++++++++++++++++++++
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Apr 2 2006 23:26:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i DOKCLU.cmd -dbcodepage 4103 -l DOKCLU.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: DOKCLU created #20101202103735
(RFF) ERROR: invalid checksum in data file "D:\SAPDVD\IDES-Exp 2\EXP2\DATA\DOKCLU.001"
current table was "DOKCLU"
(DB) INFO: disconnected from DB
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
============================================
Error log from PCL2.log
+++++++++++++++++
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Apr 2 2006 23:26:45
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe -i PCL2.cmd -dbcodepage 4103 -l PCL2.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: PCL2 created #20101202103740
(RFF) ERROR: invalid checksum in data file "D:\SAPDVD\IDES-Exp 2\EXP2\DATA\PCL2.001"
current table was "PCL2"
(DB) INFO: disconnected from DB
C:\usr\sap\DEV\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
============================================
log from import_monitor.java.log
+++++++++++++++++++++++
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 1, waiting 2, completed 40, failed 16, total 59.
Import Monitor jobs: running 2, waiting 1, completed 40, failed 16, total 59.
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 41, failed 16, total 59.
Loading of 'SAPAPPL0_10' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 42, failed 16, total 59.
============================================
log from sapinst.log
+++++++++++++++
Import Monitor jobs: running 2, waiting 9, completed 32, failed 16, total 59.
Import Monitor jobs: running 3, waiting 8, completed 32, failed 16, total 59.
Loading of 'SAPSSEXC_1' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 33, failed 16, total 59.
Import Monitor jobs: running 3, waiting 7, completed 33, failed 16, total 59.
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running ...
ERROR 2010-12-03 05:43:19
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-12-03 05:43:19
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .

Hi Rahul,
Thanks for your valuable inputs, but when tried giving the below sqlplus command it is asking for user name and password and there I got stuck. Could you please let me know what is the default user and password or is there anyway we can skip it?
Resolution
stop the all oracle services.all r automatic mode.
restart the system
==> When we restart system again all the automatic oracle services starts right, do we need to stop them again before executing the below command?
login through
goto command promt and type
sqlplus "/as sysdba"
==> after this command it is asking for user name and password
sql> startup
exit
c:---->lsnrctl (I do not understand this command, is it at C prompt or at SQL prompt?
lsnrctl>status (also do not understand how to give this command)
(look for the following message)
The command completed successfully
exit
now u start the installation.
Kindly help, it would be great if you could me your contact details, I will not disturb you but just in case of any help. Thanks once again. - Ravi.

Error during Live Cache Server Installation on SCM 4.1 system

Hi All,
I have an SCM 4.1 ABAP system running on MSSQL2005 and Win2003 server.I would like to install Live Cache Server on the same Server.Livecache client was installed as part of SCM 4.1 installation.
I have installed MAXDB software and now when im trying to install Live Cache Server Instance i get the below error
Im performing the installation with user root and it is an Administrator.
WARNING 2011-12-09 11:01:25
Execution of the command "change 'user' '/install'" finished with return code 1. Output: Install mode does not apply to a Terminal server configured for remote administration.
Installation start: Friday, 09 December 2011, 11:01:23; installation directory: G:\SCM_4.1_Media\Media_Live_Cache\New_Media\51031447_2\CD_SAP_SCM_4.1_liveCache_64bit\SAPINST\NT\AMD64; product to be installed: SAP SCM 4.1> Additional Services> Install a liveCache Server instance
Transaction begin ********************************************************
WARNING 2011-12-09 11:02:33
Error 3 (The system cannot find the path specified.
) in execution of a 'CreateProcess' function, line (265), with parameter (G:\SCM_4.1_Media\Media_Live_Cache\New_Media\51031447_2\CD_SAP_SCM_4.1_liveCache_64bit\NT\AMD64\SDBUPD.EXE -l).
Transaction end **********************************************************
WARNING 2011-12-09 11:02:34
The step Fill_sapdb_db_instance_context with step key LIVECACHESERVER|ind|ind|ind|ind|ind|0|LC_SERVER_INSTALL|ind|ind|ind|ind|ind|0|Fill_sapdb_db_instance_context was executed with status ERROR.
Has anyone seen this error before ? Any pointers would be helpful.
Regards,
Ershad Ahmed.

Subprocess starts at 20111209154957
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209154957
OK
> Subprocess starts at 20111209155027
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209155027
OK
> Subprocess starts at 20111209155221
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX db_enum
Execute Session Command : exit
> Subprocess stops at 20111209155221
OK
> Subprocess starts at 20111209155323
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209155324
OK
7.5.00.31    f:\sapdb\liv\db
7.6.06.10    f\sapdb\sdb\7606
7.6.06.10    C:\Program Files\sdb\7606
> Subprocess starts at 20111209155324
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209155324
OK
7.5.00.31    f:\sapdb\liv\db
7.6.06.10    f\sapdb\sdb\7606
7.6.06.10    C:\Program Files\sdb\7606
> Subprocess starts at 20111209161349
Execute Command : C:\Program Files\sdb\programs\pgm\dbmcli.exe -n XXXXXXXXX inst_enum
Execute Session Command : exit
> Subprocess stops at 20111209161349
OK
7.5.00.31    f:\sapdb\liv\db
7.6.06.10    f\sapdb\sdb\7606
7.6.06.10    C:\Program Files\sdb\7606
Regards,
Ershad Ahmed.

Error during early phase of installation

Hello,
I am facing an error during an installation. Our setup is as follows:
empty Oracle 10.2.0.2 Database on HPUX
Installation of BO Enterprise Server on Linux
To meet expected performance issues and ressource consumption it should be a distributed installation.
When I start the installation script I can enter some values. After adding the database parameters I am getting this error:
Failure to validate the database credential has a potential to crash the database at a later stage. Enter the correct information. (STU00104)
The error log in the installation directory is not very helpful:
BusinessObjects Enterprise CMS: Unable to connect to the CMS system database ""B01"". Reason: ?Tj?A
Has anyone had an error like this? Do you know whether there are other logfiles that can be forced to show up somehow?
Thanks for hints or ideas,
André

Problem solved: The error has been caused by wrong versions of some database client libraries. Unfortunaly I was not able to find some helpful log entries so it has been a fluke...
Best regards
André

Error:Mini SAP 4.6D Installation

Hi
I was sucessfully installed the Mini SAP 4.6D.And when
I was trying to login to MINI SAP ,got a below mentioned error.
Details are:
Partner not reached(host name....,service sapdp00)
Component : NI(Network Interface)
Version : 34
Return code: -10
Module : ninti.c
system call: SO_ERROR
Error no :-2147467259
If someone was aware of the above problem, please let
me know how Ineed to fix it.
Regards
M.Madhav


Hi Ananda,
When i m trying to setup an entry in saplogon it gives me an error
partner not reached(host shivdikar,service sapdp00)
release 46d
component NI(network Interface)
version 34
return code -10
module ninti.c
line 1008
detail NipConnect2
system call so_error
error no 10061
error text WSAECONNREFUSED: Connection refused
counter 1
I m using windows XP as OS
Kindly help me out
Thanks Rajneesh

Error during SAP NW73 Installation in Create ICM userstore phase

Hello Experts,
I facing issue in new installation of SAP NW7.3 with oracle as database on Linux.
Getting error in phase Create ICM user store as , could not load SSF library /usr/sap//D00/exe/libsapcrypto.so, Though I have libsapcrypto.so in Kernel directory. Also I tried with new libsapcrypto.so from SMP. But nothing helping here.
I have tried with many solutions as per SCN, by changing kernel and all none of these are helping. Kinldy let me know if you have suggetions.
Thanks in advance,
Regards,
Shiva

Hi Shivan
Could refer the SAP Note with workaround solution on your kernel version
1926471 - Could not load SSF library libsapsecu.so
BR
SS

Fatal Error during SAP IK XI 3.1 Installation on HPUX IA 64 Machine

I installed BO Enterprise XI 3,1 on HPUX IA64 Machine and after BO installation I installed SAP IK XI 3.1.
After I ran install.sh, select language was Ok, License agreement was Ok, License Key was OK, Install Directory was OK..
but after that, the installation was terminated...
FATAL ERROR: Product's parent not found on tree: 1E7F3898-A4B8-42D0-89F0-A713FBDEBD64, parent id: 5418F914-1D31-4849-822C-314AC28B06BF
$
the error message was like above..
What is the reason and how can I solve it..
Please let me know..
THanks..

Hello,
I think I found out what the problem is:
In our case it seems that de installerDatabase.db file is corrupt.
If you move the file to installerDatabase.org and start the installation again the FATAL ERROR won't appear.
Unfortunately the installation of the integration kid can't continue because it misses several existing program items from the BO Enterprise.
Right now Iu2019m performing a new installation of the BO Enterprise.
I hope this inormation is helpfull.
Regards,
Hans Pol

SDM deployment error during XI 3.0 installation

(nobody in the PI forum replied, so I'm reposting here)
I need to install a sandbox using this old version. Installation base is 6.40 WebAS plus Java addon SR1. System installs fine, however during final SDM deployment I get a problem during the J2EE engine restart:
errors:
service sld ================= ERROR =================
Cannot start service com.sap.aii.af.cpa.svc; it has hard reference to service sld which is not started.
and around 20 more services which have a dependency on sld
sld does not start because:
/Applications/SLD#sap.com/com.sap.lcr#com.sap.lcr.sagent.BuilderDirector#J2EE_
GUEST#328####e4cd3451819411dec19c001d72bd0666#SAPEngine_Application_Threadimpl:3_0##0#0#Error#1#com.sap.lcr.sagent.BuilderDirector#Plain###Can't access http store#
OR:
SAPEngine_System_Threadimpl:5_32##0#0#Error#1#com.sap.engine.core.service630.container.ServiceRunner#Plain###Service sld error. Nested exception is: com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='sld_3012', A
rguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key sld_3012
at com.sap.sldserv.SldServerFrame.start(SldServerFrame.java:109)
at com.sap.sldserv.SldServerFrame.start(SldServerFrame.java:78) ...........
further suspicious warnings:
Aug 5, 2009 12:51:17 AM Info: No action: Selected development component 'com.sap.aii.af.ms.svc'/'sap.com'/'SAP AG'/'3.0.0920041027171222.0000' will not be deployed because containing software component 'SAP-XIAFC'/'sap.com'/'SAP AG'/'1000.3.0.9.1.20041028052722' will not be deployed.
and this for around 20 more components from comp.sap.aii*
What went wrong, and, what can I do to fix this? Redeploy sld ? I could not find how.
Java version is latest 1.4.2 x86_64 from IBM (1.4.2_13) for my architecture (x86_64 Linux RHEL5), DB is maxdb 7.6
Any help is appreciated, Thanks.
Sanjay

Can you please check thet if you have given a central SLD then that SLD is up and running as you are getting the message.
Cannot start service com.sap.aii.af.cpa.svc; it has hard reference to service sld which is not started.
Please check this note it will solve your issue.
Note 994433 - XI AF on J2EE Engine terminates with OutOfMemoryError
you can manually start th services.
Thanks Rishi Abrol

Error during Step14 of Portal installation

Hi,
When I run Oracle 9iAS Portal 3.0 Configuration Assistant, I get the following error:
STEP 14 : Installing seed data for all layers
INSTALL_ACTION: installSeedData() : ..\..\bin\sqlplus portal32/ portal32@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROT
OCOL=TCP)(HOST=myportal)(PORT=1521)))(CONNECT_DATA
=(SID=ORCL))) @..\..\portal30\admin\plsql\wwc\wwcinsd.sql portal32 OP30_DEF TEMP wwcinsd.log OP30_DOC OP30_DOC portal32_NULL portal32_sso portal32_DEMO
INSTALL_ACTION:installSeedData() :..\..\bin\sqlplus portal32/ portal32@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROT
OCOL=TCP)(HOST=myportal)(PORT=1521)))(CONNECT_DATA
=(SID=ORCL))) @..\..\portal30\admin\plsql\wwv\wwvinsd.sql portal32 OP30_DEF TEMP wwvinsd.log OP30_DOC OP30_DOC portal32_NULL portal32_sso portal32_DEMO
ORA-03114: not connected to ORACLE
Errors encountered in the Install process. Installation Aborted.
I have got this error twice and during the second time, I made sure that I had started the listener using the lsnrctl and I was able to connect as internal, sys and manager through the svrmgrl . I was also able to run the query "Select * from global_name" which returned ORCL.WORLD.
Please help with this problem.
Thank you.
Shakti Saran

Hy
thank for your answer...you did me in the right way to solve the problem.
In my case the problem was the source ID . In configtool the box-number was the same that i have put in
cluster_switch.id properties but the problem still occurred.
I was sure about the name but following the OSS note 966752 there is an important sentence:
Note: The default value is crucial! If a custom value other than the default value was applied, we highly recommend that you restore the default value.
well....in configtool of source system ...File -> Configuration Editor and open Configurations -> cluster_data -> Property sheet instance.properties.IDXXXXXXX you have two click on instence.properties and a popup appears and you have to do attention to the default hostname that in my case was different from box number.
I've put the default hostname in cluster_switch.id properties following the note and the migration ended succesfully.
thanks a lot
nickk

SP2-0027: Input is too long error during Apex 4.0 installation

I have come across an error while installing Apex 4.0.
The installation reached the point where it gave a SP2-0027 error
...PAGE 72: Workspace Schemas
...PAGE 73: &PRODUCT_NAME. Workspace Creation
...PAGE 74: Page Views By Day Report
...PAGE 75: Page Views by Application and Page
...PAGE 76: Hourly Usage
...PAGE 77: Usage by Application, for selected hour
...PAGE 78: Page Performance Dashboard
...PAGE 79: Database
SP2-0027: Input is too long (> 2499 characters) - line ignored
wwv_flow_api.create_report_region (
ERROR at line 16:
ORA-06550: line 16, column 1:
PLS-00703: multiple instances of named argument in list
ORA-06550: line 16, column 1:
PL/SQL: Statement ignored
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Following this, I looked up Apex help, and so checked dba_registry
C:\apex>C:\oraclexe\app\oracle\product\10.2.0\server\BIN\sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Jul 13 15:40:05 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect sys as sysdba
Enter password:
Connected.
SQL> SELECT STATUS FROM DBA_REGISTRY
2 WHERE COMP_ID = 'APEX';
STATUS
LOADING
Please help
Edited by: user4477408 on Jul 19, 2010 3:35 PM
Edited by: user4477408 on Jul 26, 2010 11:29 AM

Did you keep any kind of external references to your pages/reports? From what it looks like, one of your report regions exceeds 2500 characters and APEX is having a hard time crunching it. See if you can find that page, then export that page, delete the region, and import the page on it's own later.
Not sure why it would be such a small area, though. I usually don't have any trouble until I hit 32K characters.

Error during R/3 IDES installation -

Dear All
I am trying to install SAP R/3 4.7E IDES on Windows 2003 Enterprise with Oracle 10.2.0.4 version.
During the database load phase, i am encountering a problem during creation of D010LINF view which is using T0001 table and mentions that the table doesnot exist. I am copying the relevant log here. Also i see a error mentioning that could not access SAPUSER table. Please help
Log file - SAPVIEW.log
F:\usr\sap\R47\SYS\exe\run/R3load.exe: START OF LOG: 20100302102935
F:\usr\sap\R47\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
F:\usr\sap\R47\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
F:\usr\sap\R47\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPVIEW.cmd -l C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPVIEW.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP VIEW "D010LINF")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "D010LINF" ( "PROG" , "R3STATE" , "MACH" , "UNAM" , "UDAT" , "UTIME" , "L_DATALG" , "Q_DATALG" , "SDAT" , "STIME" , "MINOR_VERS" , "MAJOR_VERS" ) AS SELECT T0001."PROGNAME", T0001."R3STATE", T0001."MACH", T0001."UNAM", T0001."UDAT", T0001."UTIME", T0001."L_DATALG", T0001."Q_DATALG", T0001."SDAT", T0001."STIME", T0001."MINOR_VERS", T0001."MAJOR_VERS" FROM "REPOLOAD" T0001)
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
F:\usr\sap\R47\SYS\exe\run/R3load.exe: job finished with 1 error(s)
F:\usr\sap\R47\SYS\exe\run/R3load.exe: END OF LOG: 20100302102937
The line showing the SAPUSER error
DbSl Trace: ORA-1403 when accessing table SAPUSER
Lokesh

I am now not receiving the SAPUSER error. The only error i am receiving now is this as per SAPVIEW.log
F:\usr\sap\R47\SYS\exe\run/R3load.exe: START OF LOG: 20100302121409
F:\usr\sap\R47\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
F:\usr\sap\R47\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
F:\usr\sap\R47\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPVIEW.cmd -l C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPVIEW.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP VIEW "D010LINF")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "D010LINF" ( "PROG" , "R3STATE" , "MACH" , "UNAM" , "UDAT" , "UTIME" , "L_DATALG" , "Q_DATALG" , "SDAT" , "STIME" , "MINOR_VERS" , "MAJOR_VERS" ) AS SELECT T0001."PROGNAME", T0001."R3STATE", T0001."MACH", T0001."UNAM", T0001."UDAT", T0001."UTIME", T0001."L_DATALG", T0001."Q_DATALG", T0001."SDAT", T0001."STIME", T0001."MINOR_VERS", T0001."MAJOR_VERS" FROM "REPOLOAD" T0001)
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
F:\usr\sap\R47\SYS\exe\run/R3load.exe: job finished with 1 error(s)
F:\usr\sap\R47\SYS\exe\run/R3load.exe: END OF LOG: 20100302121410
Can i create teh T0001 table manually or suggest a solution guys
Lokesh

Errors During sap 4.7 installation-kindly help

Similar Messages

Maybe you are looking for