Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.
We restart the excel service app and it solves. Looking for permanent solution.
Regards,
Kunal

To resolved the issue do a simple restart.
Restart the server
Before restarting, verify that this problem occurs often. It may be an intermittent problem that is automatically corrected and does not require you to restart the server.
If the problem occurs often, restart the server running Excel Services Application.
If the problem continues to occur often, and restarting the server did not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Excel Services Application and re-add the server to the server farm.
Here's the article with the explanation: Error communicating with Excel Services
Application - Events 5231 5239 5240
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Similar Messages

Event Viewer ACPI error MBP mid09

Hi, I have installed Win 7 on my MBP 5.5 mid 2009 and although its running well I am getting an error message in event viewer saying:
Error
25/09/2014 00:00:32
ACPI
13
None
something about the embedded controller failed to start in a reasonable time. Would anyone with the same mac please check their event logs to see if they have this error please?
I had this and a HAL error under Win 7 ultimate x64 (used this as a test os) so I installed Win 7 Pro from a Genuine Disc (I do not condone piracy) and I am getting the ACPI error (only after all the drivers were installed, the error message didnt show prior to boot camp 4 install). So before I spend £100 on a Genuine Windows disc (I already purchased Windows 8 at £106 but it seems apple dont support it on this mac :-(...) I'd like to know if its a failing logic board or driver related.
Thanks in advance
Darren

I have been running OSX for around 1 hour and then I rebooted into windows 7, loaded the event logs immediately and found the ACPI error had been recorded precisely 1 hour before windows had booted, I am wondering if this could be a bug between Mac/Windows time feature. after more restarts the ACPI isn't being recorded and other events times are correct.
edit:
I have just disabled the Synchronise with internet time feature in windows. I'll keep a look out.

When I rest my mobile I try to restore from iCloud backup but I got a message saying the service unavailable .I am doing this from 2 days and the Broblem still what should I do ?

When I rest my mobile I try to restore from iCloud backup but I got a message saying the service unavailable .I am doing this from 2 days and the Broblem still what should I do ?
<Email Edited by Host>

Go to System Preferences/Accounts
Click on your name
Select 'Allow user to administer this computer'

HTTP request failed. Error code: "503". Service Unavailable in RWB and Cache Refresh

Dear Experts,,
We have MDM and PI in our landscape. We are using MDM Adapter for the integration between the two.
When we try to run the T Code SXMB_IFR, we are getting HTTP request failed error. i.e., “Error Code: 503 -- Service Unavailable”. And also the RWB communication channel is not working because of this error and we are unable to refresh the cache too because of this error.
We have checked from MDM side, and messages are flowing from ready folder but not coming into PI. We had monitored the messages using
SXMB_MONI.
We have restarted the Java Server but it’s taking too much time to restart around 12 to 15 hours & we checked after that but still facing the same issue.
Could you please help me to figure out this issue.
Thank you for your support in advance.
Thanks and Regards,
Priti.

Hi Priti,
You can check the suggestion of Jyothi Anagani
Because of J2EE application com.sap.aii.af.ms.app not active
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Runtime Workbench "503 Service Unavailable" Error After JSPM SP Update
Regards,
Nabendu.

Event viewer Issues "Error 0x80070005"

Hello this is the severity: warning i keep getting for a user in event viewer
"Error 0x80070005 occurred while creating known folder {3EB685DB-65F9-4CF6-A03A-E3EF65729F3D} with path 'C:\Windows\system32\config\systemprofile\AppData\Roaming'."
Is someone familiar with this warning/error message and how to stop it from coming up. Also if it helps the user pc is on a domain and im the admin for it.

Hi,
How is the current situation? Have you check its permission?
Please run chkdsk /f /r command to fix and recover the disk error:
Run Check Disk from a Command Line to Check for and fix Disk Errors
https://technet.microsoft.com/en-us/magazine/ee872425.aspx
Meanwhile, please refer to this familiar thread:
https://social.technet.microsoft.com/Forums/windows/en-US/047bdb94-9958-4e8e-a112-4555e1ee3ad4/known-folders-errors-in-event-viewer?forum=w7itproperf
Karen Hu
TechNet Community Support

Event viewer subscriptions error code 0x32

I’m using windows 7 home premium trying to configure event viewer subscriptions.
But getting error code (0x32) .
[hadi-TOSH] -
Error - Last retry time: 4/9/2014 6:28:35 PM. Code (0x32): <f:ProviderFault provider="Event Forwarding Plugin" path="%systemroot%\system32\wevtfwd.dll" xmlns:f="http://schemas.microsoft.com/wbem/wsman/1/wsmanfault"><t:ProviderError
xmlns:t="http://schemas.microsoft.com/wbem/wsman/1/windows/EventLog">Windows Event Forward Plugin failed to create subscription.</t:ProviderError></f:ProviderFault>
Next retry time: 4/9/2014 7:08:35 PM.

Hi,
Please make sure the Windows Event Collector service is started. You must be a member of the Administrators group to start this service.
http://technet.microsoft.com/en-us/library/cc748890.aspx
Kate Li
TechNet Community Support

IPod 5G freezes iTunes, Event Viewer System Error

iPod 5G not playing nicely with iTunes, syncs iPod then freezes PC, unable to exit iTunes or disconnect iPod w/o rebooting system.
In Event Viewer>System, I found this:
Event Source: PlugPlayManager
Event ID: 256
Description: Timed out sending notification of device interface change to window of "program or service name and/or GUID."
thx-
c.

cronish
Have you been able to verify that your iPod is functioning properly by hooking it up to another computer?
If so, then here's a REAL shot in the dark.
Restart your computer and go into the Bios and turn off Hyperthreading if it's enabled.
If that doesn't work then re-enable it.
Jim

XI cache refresh error 'HTTP status code503 Service Unavailable'

We are running XI 3.0, SP 9
XI cache refresh stopped working today (red traffic light). Tried a Delta refresh. Got a program dump with error 'Access with ZERO object reference not possible'.
Activated all objects in Change lists of Repository, directory. Tried Delta refresh again. Same error again.
Re-started XI server.Now XI cache has error
'Unable to refresh cache contents'.
Detail says 'HTTP status code503 Service Unavailable'.
Tested RFC connection of INTEGRATION_DIRECTORY_HMI and other XI related destinations. Everything works fine.
Please let me know if anyone faced this before and what is the solution..
Thanks
Partha

Ok, well this note i am note able to handle because of missing poissibity to use the Visual Admin.
Another thing that came up: i still have probs with queues! Sometimes (today, and only today) a message runs through XI, so everything is fine.
Because of this i tried to deregister and register the queues once again - but the scheduler status is still on "inactive"....
what is the prob?!

Windows 8 Event Viewer reports errors

1) Error: Source DistributedCOM; The server {....} did not register with DCOM within the required timeout.
I have changed the service startup to Automatic with delay with no result.
2) Error: Source Service Control Manager; The HP Network Devices Support service terminated with the following error: The specified module could not be found.
I am unable to find a way to reinstall this module. Granted this may be an HP support issue.

Hello @OrygunGuy ,
Thanks for posting on the HP Forums!
I'm sorry to hear about your errors. To resolve all your issues, I would like you to reinstall the operating system. It will clear up any software conflicts and allow you to start fresh, likely on Windows 8.
First, please ensure you backup your files. Here is information on how to do this: Backing Up Your Files (Windows 8)
Once this is done, it is safe to reinstall the operating system. Performing an HP System Recovery (Windows 8)
Please let me know your results. Thanks!
Mario
I worked on behalf of HP.

"invalid web service URL" error for create web service system

Hi.
I want to call web service in visual composer and try to create Web Service definition.
When I push create button in visual composer, I got "invalid web service URL" error.
My web service is located in SAP ABAP System and I can check WSDL URL in web service homepage.
(http://mycompany.com:8000/sap/bc/srt/rfc/sap/ZTEST?sap-client=500&wsdl=1.1)
Any ideas for this error ?
Regards, Arnold.

Hi
Please can you create the web service in the portal as a portal system, this will work and you will be able to see the service in Visual Composer.
Jarrod Williams

BDoc Error for R/3 service category

Hello
Currently i am processing the inbound qRFC queue as it has blocked lot of data to flow from R/3 to CRM.
While processing, one of the master queue was stopped and the SYSFAIL error was displayed. Using Tcode SMW01 i looked for the error message due to which it was stopped.
Here is the error mesasge:
Category for R/3 service category CIWO does not exist
Message no COM_PRODUCT_API004.
This is very important to resolve as it holds thousands of data.
I will give you lot of points for the help.
Thanks

HI willie,
So as per what you said, first i need to download all the other object before i dowload the service_master one? RIght?
If yes, than i already did that. What is now happening is all the queues have drained except the service master queue which gives PRODUCT_SRV error.
It says that "Category for R/3 material group E22-52-01 does not exist"
so what should i do now?
Thanks

Cannot sign in to Elements 9 Get error message 400-photoshop services unavailable

Cannot sign into Elements 9. Get Error message 400-photoshop services unavailable

They're not available because photoshop.com is dead and gone, and any photos there are moved to revel, which you can't access through PSE versions prior to PSE 11. You should have received a bunch of emails about this back when it was happening.
http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/

Event Viewer: Export all events during timeframe

I would like to export all events in Event Viewer within a certain time. However, when I choose to select all event sources and I receive the error "Event Viewer cannot open the event log or custom view. Verify that Event Log service is running
or query is too long. The data is invalid (13)."
I can eventually view some events by unchecking a few items from event logs under Applications and Services Logs. Therefore it seems that the UI is unable to handle the query for all logs.
Looking for an easy way to export from all logs for a specific time period.

Hi,
à
However, when I choose to select all event sources and I receive the error
"Event Viewer cannot open the event log or custom view.
Verify that Event Log service is running or query is too long.
The data is invalid (13)."
I’m a little confused with the operation that you described. Would you please let me know more details of it?
Sorry for it.
By the way, for the error message, please refer to following KB and check if can help you.
Error message when you use Event Viewer to open an event log
on a Windows Vista or a Windows Server 2008-based computer: "Event Viewer cannot open the event log or custom view"
Just my guess, you want to Create Custom View for all event logs and then click “Save All Events in Custom
View As…” to save those all events. In the Filter tab in Create Custom View panel, if you check too much items from Event logs, it will be empty. I suggest that firstly create custom view for Windows Logs and export it. Then do same operation for other event
logs (under the item number limitation). Meanwhile, please also refer to following article and check if Wevtutil command can help you.
Wevtutil
Query and Manage Event Logs with the Windows
Events Command Line Utility
à
Therefore it seems that the UI is unable to handle the query for all logs.
I will agree with you.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Error when adding new service invoice with DI Server, error -1114

Hi everybody.
I'm trying to add an serviceinvoice (DocType = 'Service Transaction') with DI Server AddObject method.
The xml-request document looks like this:
<?xml version='1.0' encoding='UTF-16' ?>
<env:Envelope xmlns:env='http://schemas.xmlsoap.org/soap/envelope/'>
<env:Header>
<SessionID>........</SessionID>
</env:Header>
<env:Body>
<dis:AddObject xmlns:dis='http://www.sap.com/SBO/DIS'>
<BOM>
<BO>
<AdmInfo>
<Object>oInvoices</Object>
</AdmInfo>
<Documents>
<row>
<DocNum>1241</DocNum>
<HandWritten>1</HandWritten>
<DocDate>10/08/2005</DocDate>
<DocDueDate>10/08/2005</DocDueDate>
<CardCode>V1010</CardCode>
<DocType>S</DocType>
</row>
</Documents>
<Document_Lines>
<row>
<Currency>USD</Currency>
<LineTotal>7500,00</LineTotal>
<AccountCode>_SYS00000000001</AccountCode>
<TaxCode>LA</TaxCode>
</row>
<row>
<Currency>USD</Currency>
<LineTotal>-7500,00</LineTotal>
<TaxCode>LA</TaxCode>
</row>
</Document_Lines>
</BO>
</BOM>
</dis:AddObject>
</env:Body>
</env:Envelope>
...But I get error eveytime I try to do it, the response document as follows:
<?xml version="1.0"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
<env:Body>
<env:Fault>
<env:Code>
<env:Value>env:Receiver</env:Value>
<env:Subcode>
<env:Value>-1114</env:Value>
</env:Subcode>
</env:Code>
<env:Reason>
<env:Text xml:lang="en">Schema Validation Failed</env:Text>
</env:Reason>
<env:Detail>
<ErrorList>
<Error>System Id = 193271344, Line Number = 1, Column Number = 359, Description = Datatype error: Type:InvalidDatatypeFacetException, Message: Invalid chars encountered..</Error><Error>System Id = 193271344, Line Number = 1, Column Number = 488, Description = Datatype error: Type:InvalidDatatypeFacetException, Message: Invalid chars encountered..</Error>
</ErrorList>
<Object>13</Object>
<ObjectIndex>1</ObjectIndex>
<Command>AddObject</Command>
<SessionID>............</SessionID>
</env:Detail>
</env:Fault>
</env:Body>
</env:Envelope>
Why? Which fields are missing or which field values of those I'm sending might be wrong?

Did you try to set the AccountCode also for the 2nd line?
HTH,
Frank

Screen View has changed to plain text and I don't know why or how to get it to return to a normal view

My screen view has changed to a plain text yesterday and I do not understand why. I did not make any changes. I did not install any new programs. I did install to updates from Neat Works and Quick Time. Also ran PC clean up by AVG.

-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to View Menu -> '''Zoom''' -> click '''Reset''' -> '''Page Style''' -> select '''Basic Page Style'''
-> go to Tools Menu -> Clear Recent History -> '''Time range to clear: select "EVERYTHING"''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache, Site Preferences''' -> click '''Clear Now'''
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries
-> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
-> Click OK on Options window -> Restart Firefox
Check and tell if its working.

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

Similar Messages

Maybe you are looking for