ERRORS IN 3.0 (iTunes ENGLAND)
There are a couple of errors in iTunes on the iphone 3G,
1.VIDEO-FILMS-GENRES-ALL GENRES (there is a spelling mistake when you open up this All Genres is spelt ALLE.
2.MORE-AUDIOBOOKS (there is a tab at the top right which says FEATURED CATEGORIES,this wording is way too long for the tab,this is obviously a layout error (all other countries have wording CATEGORIES and fits into the space provided)
Anyone know why nothing is being done to resolve this ?,i have contacted APPLE several times about this but nothing is being done.... Great customer service !!
"Anyone know why nothing is being done to resolve this ?"
Does anyone know that nothing is being done about this?
If you've reported it then perhaps the next update will contain a correction, perhaps not, depending on what needs to be done that is more important to more users than correcting spelling mistakes and minor presentational issues. We'll have to wait for OS 3.1 and associated built-in apps updates to find out, I guess?
Similar Messages
-
When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?
Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
Error message when updating Itunes...can not open Itunes program
I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364) -
I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close
i don't know how they solved it, i'm having the same problem on Windows XP
EventType : BEX
P1 : iTunes.exe
P2 : 10.7.0.21
P3 : 504d85d9
P4 : unknown
P5 : 0.0.0.0
P6 : 00000000
P7 : 08920740
P8 : c0000005
P9 : 00000008 -
When I try to sync my iPad and iPhone it will get within the last 3 pictures then stop giving me an APPCRASH error message. Then iTunes will shut down. No matter what I do to increase or decrease the number of pictures it always stops 3rd from the last.
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.4.0.80
Application Timestamp: 4e262cfr
Fault Module Name: QuickTime.qts
Fault Module Version: 7.70.80.34
Exception Code: c0000005
Exception Offset: 00146b30
OS Version 1033
Locale ID:
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information4: 0a9e372d3b4ad19135b953a78882e789
Any assistance I can get will be greatly appreciated.Thank you iTunes for fixing the problem of downloading my pictures to my iPad and iPhone with the update 10.5.0.142
-
Here is a copy of the windows vista error report.
Product
iTunes
Problem
Stopped working
Date
4/19/2014 9:38 PM
Status
Report Sent
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 11.1.5.5
Application Timestamp: 53073d6a
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000005
Exception Offset: 00062086
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 8d13
Additional Information 2: cdca9b1d21d12b77d84f02df48e34311
Additional Information 3: 8d13
Additional Information 4: cdca9b1d21d12b77d84f02df48e34311
Extra information about the problem
Bucket ID: 95851104
I would appreciate any suggestions or ideas of where else to look for advice. Thanks!Hey jcaqualung,
Thanks for the question. I understand that you are experiencing issues with iTunes on your Windows Vista machine. The following resource may provide a solution. I would also recommend installing iTunes on the internal hard drive of your computer, as opposed to the external drive.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M. -
My iTunes program is giving me a message that says, "Runtime error" and wont open iTunes. How do I fix this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms are appreciated.
Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.
-
I cannot open itunes. Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
What do I need to do so I dont lose all my loaded music, etc.?
ThanksIf you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic! -
When I open iTunes, I receive an error that reads "iTunes has encountered a problem and needs to close. Sorry for the convenience." When I click to see the error, it reads "AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll" Why ? I am overly frustrated. Please help. Not exactly sure which operating system I have. It is a dell laptop with xp.
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72
AppName: itunes.exe AppVer: 10.5.2.11 ModName: msvcr80.dll
ModVer: 8.0.50727.6195 Offset: 00026b72Well I was able to successfully revert back to iTunes8. Here's my steps:
1. In Add/Remove Programs I deleted all Apple products (iTunes, QuickTime, Safari, Bonjour, etc.)
2. I then check C:\Program Files\ and made sure all folders were deleted (QuickTime, etc.)
3. I then ran a Registry Cleaner program to make sure all entries from Apple products were removed.
4. I then rebooted my PC
5. I then downloaded iTunes8.0.2 from here: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
6. After it installed it said it could use my iTunes library file because it was created with a newer version. So I re-created my library by following these steps: http://support.apple.com/kb/HT1451
It took some time but iTunes is now back up and running. And I have all my playlists, etc. I haven't tried to sync anything yet. I'm just thrilled to have my iTunes back! -
Error Message 2122 on itunes 6.0.2.23
I don't know if anyone else is having this issue or has had this issue, but why is it that I can import songs off my Music CD's into itunes (the lastest version), but none of my playlists or songs will burn onto a blank CD that I insert?
It used to burn CD's before this update of itunes but now I can't. Why is that? Why can't I burn anything with itunes? I can burn data CD's with Roxio..I did that as a test to see if the Driver was corrupted and that's why I can't burn..but it turns out I can burn a CD just not with itunes anymore. What is this unknown error message 2122 that itunes keeps popping up whenever I try to burn any songs onto a blank CD with the software?
Please do tell me..because I have over 300 songs in itunes, some of which I bought at the music store and now I can't burn those songs on a CD...what is the point of itunes if the Burner is failing to Burn a CD???? If anyone has any idea about this, please share.
Thank You
I ran the CD Diagnostics and this is what I got:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 8500
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), iomdisk (5.0.1636.1), Pfc (2.5.0.201), Cdr4_xp (5.3.4.21),
UpperFilters: pwd_2k (5.3.4.59), Cdralw2k (5.3.4.21), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce4 4200 Go (Dell Mobile)\GeForce4 4200 Go
IDE\DiskIC25N080ATMR04-0______________________MO4OAD0A, Bus Type ATA, Bus Address [0,0]
IDE\CdRomPHILIPSDVD+RW_SDVD6004_________________1.03___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: PHILIPS DVD+RW SDVD6004, Rev 1.03
Audio CD in drive.
Found 15 songs on CD, playing time 73:11 on Audio CD.
Track 1, start time 00:02:30
Track 2, start time 01:38:44
Track 3, start time 05:40:35
Track 4, start time 11:32:26
Track 5, start time 15:48:22
Track 6, start time 20:33:74
Track 7, start time 26:05:01
Track 8, start time 31:29:24
Track 9, start time 36:44:21
Track 10, start time 41:30:70
Track 11, start time 50:16:13
Track 12, start time 54:50:52
Track 13, start time 60:33:42
Track 14, start time 63:38:00
Track 15, start time 68:58:37
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 16.
The drive CDRW speeds are: 16.
The drive DVDR speeds are: 16.
The drive DVDRW speeds are: 16.
The last failed audio CD burn had error code 2122(0x0000084a). It happened on drive D: PHILIPS DVD+RW SDVD6004 on CDR media at speed 0X.Savita,
Let's start with the support site for your computer. Go there and click on the "Show All" link.
Download and install the updates labeled "Intel Mobile Chipset", "Philips SDVD6004 2X Slim DVD+RW", and "nVidia GeForce4 4200 Go".
If that doesn't fix the problem, come back and we'll try something else.
Error 2122 is a "bad write speed for media" error. You might also try deliberately setting your burn speed in the iTunes preferences to 16x and see if that helps. But iTunes should already be doing that if you have it set to maximum possible speed. -
Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in
Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in
-
When I try ot open iTunes on my computer I get an error message stating "The iTunes Library.itl file cannot be found or created" and the program fails to open. How can I fix this issue?
Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden -
Can't install itunes - error message "the folder "itunes" cannot be found
Help. I just bought a new Iphone and can't get itunes to load. I had itunes on my computer for several years for my nano - haven't synced up in about a year. Went to open it and got the following error message
The folder "itunes" cannot be found or created and is required. The default location for this folder is inside Mu Music folder"
I have uninstalled everything - quicktime, apple mobile, every single file. I have rebooted, run searches to make sure there were no files at all left - did it through control panel, search etc., rebooted and downloaded it again (this make about 5 times now) and still get that same message that the folder cannot be found. Help! I just blew about $400 in the Apple store!
Can anyone help me?For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
How to I get the the Wacom tablet's pen sensitivity to work on Photoshop when it works in Flash?
Hi Everyone! Alright so I did some looking around to see if I could use other threads to help solve my issue before I came here to ask. A lot of them seem to be related to surface pro and some of the instructions I followed was to remove USB drivers
-
Hi all. I've hit a problem here and I was hoping somebody could point me in the right direction. Here's the sitation. I have a Wrt160N v3 router and I have 2 wired connections out of it.. one to my main computer and one upstairs where my ps3 used t
-
Which DAQmx Version is sutiable for Labview 8.2.1
Hai Guys, I am Thiyagu. I have one Doubt in DAQmx. If One year before my senior create One VI. The VI Labview Version 8.2.1. Lastweek running VI Harddisk was crased. I have only source code. I pasted that source code in another PC. I op
-
Regarding IDOC posting to create sales order
Hi Friends, when we are trying to post Idoc to create sales order, Idoc status is showing error as "Enter requested delivery date" with status 51. and error message no is V1394. we found that user is trying to post the Idoc with two delivery dates. K
-
How do you convert Word 2010 file to PDF? Adobe Reader XL fails to perform with error message ...not supported file type..