Errors in ICM Log file

Hi,
My instance is 11.5.10.2...there is no problem with Concurrent Manager..they are working fine...
But I did find the following messages in the ICM Log file...why these errors are appearing in the ICM Log file...
======================================
Shutting down Internal Concurrent Manager : 21-JUL-2007 12:21:49
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01012: not logged on
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPCSQ encountered an ORACLE error. ORA-12154: TNS:could not
resolve service name
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
================================================

Does the above messages appear frequently in the log file or only once?yes it is frequently appearing...
Do you have a GSM setup at your application? What is the value >>of "Concurrent:GSM Enabled" profile option? It is enable and set to 'Y'
========================
Eventhough getting those errors in the ICM log file.... I am not facing any problem regarding Concurrent Request processing.
I Just want to know , why these errors are appearing...

Similar Messages

  • "Error opening installation log file" when installing Photoshop Elements 10

    I bought Photoshop Elements 10 , Premiere Elements 10 .... I got the Premiere to download no problem but i can't get the photoshop to download. This is the msg that I am getting when I try to dl it "Error opening installation log file. Verify that the specified log file location exsists and is writable". Not sure why I can download one and not the other since they are both on the same disc. Plus in the program that I purchased I has 5 DVD's. Any suggestions??
    Thanks
    Message title was edited by: Brett N

    Install Premiere Elements, Photoshop Elements
    Mylenium

  • 9.3.1- Not able to see more than 1 errors in application.log file

    Hi,
    In 9.3.1. version, I am not able to see more than 1 errors in application.log file during dataload without rules files.
    If anybody has faced this solution, pls let me know the cause.
    Thanks
    jazz

    Hey Jazz,
    in the first row add a rule file with no load file change the path to what you want. then insert a new row add your load file here. it should have the path from the previous row in the error file. Then delete the first row and run. I had to do this for a level zero load and was the only thing I could figure out so far

  • Errors in Alert log file

    Hi,
    I have encountered following errors in alrt log file, its strange to see FAST_START_MTTR_TARGET is out of valid and aksing to use another value and that value is changing every second, it should be in increasing order or it should be consistent. I think i have a serious problem, so anyone could help me out on this. I am getting this "FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 24381 instead" error regurarly.
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 24381 instead.
    Wed Jan 16 23:40:34 2008
    Completed checkpoint up to RBA [0x2aadb.2.10], SCN: 5473742880
    Wed Jan 16 23:45:51 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 24017 instead.
    Wed Jan 16 23:46:21 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 23647 instead.
    Wed Jan 16 23:46:52 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 23298 instead.
    Wed Jan 16 23:47:22 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 22906 instead.
    Wed Jan 16 23:47:52 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 22507 instead.
    Wed Jan 16 23:48:22 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 22133 instead.
    Wed Jan 16 23:48:52 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 21786 instead.
    Wed Jan 16 23:49:22 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 21443 instead.
    Wed Jan 16 23:49:52 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 21062 instead.
    Wed Jan 16 23:50:22 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 20698 instead.
    Wed Jan 16 23:53:53 2008
    Incremental checkpoint up to RBA [0x2aadb.31b4.0], current log tail at RBA [0x2aadb.3e38.0]
    Thu Jan 17 00:00:54 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 19582 instead.
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 16287 instead.
    Thu Jan 17 00:34:01 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 15902 instead.
    Thu Jan 17 00:34:31 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 14638 instead.
    Thu Jan 17 00:35:01 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 13600 instead.
    Thu Jan 17 00:35:31 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 12773 instead.
    Thu Jan 17 00:36:02 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 12460 instead.
    Thu Jan 17 00:36:32 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 12338 instead.
    Thu Jan 17 00:37:01 2008
    Process P187 died, see its trace file
    Thu Jan 17 00:37:02 2008
    FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 12248 instead.
    Thu Jan 17 00:37:02 2008
    Process P188 died, see its trace file
    Thu Jan 17 00:37:03 2008
    Process P189 died, see its trace file
    Thu Jan 17 00:37:04 2008
    Process P190 died, see its trace file
    Thu Jan 17 00:37:16 2008
    Process J000 died, see its trace file
    Thu Jan 17 00:37:16 2008
    kkjcre1p: unable to spawn jobq slave process
    Thu Jan 17 00:37:16 2008
    Errors in file /oracle/BP3/saptrace/background/bp3_cjq0_4788.trc:
    Process J000 died, see its trace file
    Thu Jan 17 00:37:22 2008
    kkjcre1p: unable to spawn jobq slave process
    Thu Jan 17 00:37:22 2008
    Errors in file /oracle/BP3/saptrace/background/bp3_cjq0_4788.trc:
    Thanks
    Jafar

    This parameter, FAST_START_MTTR_TARGET ranges from 0 to 3600 seconds. It is important to specify your oracle version, since a similar issue is reported for the 10gR1 release.
    The solution for it would be to increase the value to the suggested one in the alert.log file, but it could be completely out of range from the valid values, so set it to zero and let the oracle instance calculate the value. You can check the output at the V$INSTANCE_RECOVERY view at the columns TARGET_MTTR, and ESTIMATED_MTTR prior to proceeding with modificaiton.
    On the other hand, I suggest you to read this metalink note
    Kkjcre1p: Unable To Spawn Jobq Slave Process, Error 1089
         Doc ID:      Note:344275.1
    for the Kkjcre1p error message.
    ~ Madrid

  • RMAN success, but errors in alert.log file

    My RMAN backup script runs well, but generates errors in alert.log file.
    Here is the trace file contents:
    /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_3990.trc
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server
    System name: Linux
    Node name: plockton
    Release: 2.6.18-128.2.1.el5
    Version: #1 SMP Wed Jul 8 11:54:54 EDT 2009
    Machine: i686
    Instance name: XE
    Redo thread mounted by this instance: 1
    Oracle process number: 26
    Unix process pid: 3990, image: oracle@plockton (TNS V1-V3)
    *** 2009-07-23 23:05:01.835
    *** ACTION NAME:(0000025 STARTED111) 2009-07-23 23:05:01.823
    *** MODULE NAME:(backup full datafile) 2009-07-23 23:05:01.823
    *** SERVICE NAME:(SYS$USERS) 2009-07-23 23:05:01.823
    *** SESSION ID:(33.154) 2009-07-23 23:05:01.823
    *** 2009-07-23 23:05:18.689
    *** ACTION NAME:(0000045 STARTED111) 2009-07-23 23:05:18.689
    *** MODULE NAME:(backup archivelog) 2009-07-23 23:05:18.689
    Does anyone know why? Thanks.
    Richard

    I'm not sure if this will answer your question or not, but I believe these messages can likely be ignored.
    I'm currently running 10.2.0.1.0 Enterprise Edition in pre-production (yes, I know I should apply the latest patchset and I plan to do so as soon as I get a development box allocated to me and can test it's impact). I see the same types of messages that you've reported with each of my regularly-scheduled backups:
    a) The alert_<$SID>.log reports that there are errors in trace files:
    Mon Aug 10 04:33:49 2009
    Starting control autobackup
    Mon Aug 10 04:33:50 2009
    Errors in file /opt/oracle/admin/blah/udump/blah_ora_32520.trc:
    Mon Aug 10 04:33:50 2009
    Errors in file /opt/oracle/admin/blah/udump/blah_ora_32520.trc:
    Mon Aug 10 04:33:50 2009
    Errors in file /opt/oracle/admin/blah/udump/blah_ora_32520.trc:
    Control autobackup written to DISK device
    handle '/backup/physical/BLAH/RMAN/cf_c-2740124895-20090810-00'
    b) The .trc files, when you look at them contain no errors - only these "informational" messages:
    *** 2009-08-10 04:33:50.781
    *** ACTION NAME:(0000105 STARTED111) 2009-08-10 04:33:50.754
    *** MODULE NAME:(backup archivelog) 2009-08-10 04:33:50.754
    *** SERVICE NAME:(SYS$USERS) 2009-08-10 04:33:50.754
    *** SESSION ID:(126.28030) 2009-08-10 04:33:50.754
    c) I've verified that LOG_ARCHIVE_TRACE is set to 0:
    SQL*Plus> show parameter log_archive_trace
    NAME TYPE VALUE
    log_archive_trace integer 0
    As best I can discern from my own experience, these should just be ignored and I trust (read: "hope") they will simply go away once the latest patchset is applied. As for you running Oracle XE, a patchset is not an option, unfortunately.
    V/R
    -Eric

  • Errors in a log file /var/log/system.log

    I'm getting these errors in a log file /var/log/system.log
    Shutdown:
    Sep 21 12:41:38 Mac-mini.local WindowServer[86]: CGXGetConnectionProperty: Invalid connection 42243
    Sep 21 12:41:38 Mac-mini.local coreservicesd[58]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=145
    Sep 21 12:41:38 Mac-mini.local WindowServer[86]: CGXGetConnectionProperty: Invalid connection 42243
    Sep 21 12:41:38 Mac-mini.local coreservicesd[58]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to Sep 21 12:41:38 Mac-mini.local loginwindow[41]: DEAD_PROCESS: 41 console
    Sep 21 12:41:38 Mac-mini.local WindowServer[86]: CGXGetConnectionProperty: Invalid connection 42243
    Sep 21 12:41:38 Mac-mini.local coreservicesd[58]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=142
    Sep 21 12:41:38 Mac-mini.local shutdown[300]: halt by andrei:
    Boot & Working:
    Sep 21 12:42:11 localhost com.apple.launchd[1] (com.apple.automountd): Unknown key for boolean: NSSupportsSuddenTermination
    Sep 21 12:42:22 Mac-mini.local apsd[56]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    Sep 21 12:42:26 Mac-mini.local authorizationhost[121]: in od_principal_for_user(): failed: 7
    Sep 21 12:42:26 Mac-mini.local authorizationhost[121]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
    Sep 21 12:42:27 Mac-mini.local loginwindow[41]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    Sep 21 12:42:31 Mac-mini.local XProtectUpdater[24]: Ignoring new signature plist: Not an increase in version
    Sep 21 12:42:32 Mac-mini com.apple.launchd[1] (com.apple.xprotectupdater[24]): Exited with code: 252
    Sep 21 12:43:04 Mac-mini.local com.apple.security.pboxd[290]: Bug: 12C54: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
    Sep 21 12:53:49 Mac-mini.local CVMServer[98]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
    Sep 21 12:59:48 Mac-mini.local com.apple.security.pboxd[290]: kCGErrorFailure: CGSSetHideOnDeact: error getting window tags
    Sep 21 13:00:07 Mac-mini.local com.apple.security.pboxd[290]: _NXTermWindow: error releasing window (1000)
    Sep 21 13:00:07 Mac-mini.local com.apple.security.pboxd[290]: __block_global_2: connection failed unexpectedly; terminating process; delegate was (
    system.log - https://docs.google.com/open?id=0Bz5zKwys0GTcSzI5UFJRUzFxZjQ

    File a bug report with Apple.

  • Errors tracking through log file(tomcat5)/jsp

    Hi All!
    Can anyone find out errors in this log file ..pls its urgent..
    I got to make jsp package run perfectly ...but its not finding out class files.
    log4j: Finished configuring.
    Oct 12, 2005 2:04:24 PM org.apache.catalina.core.StandardHostDeployer install
    INFO: Installing web application at context path from URL file:C:\Program Files\Apache Software Foundation\Tomcat 5.0\webapps\ROOT
    Oct 12, 2005 2:04:24 PM org.apache.commons.digester.Digester fatalError
    SEVERE: Parse Fatal Error at line 16 column 2: The markup in the document following the root element must be well-formed.
    org.xml.sax.SAXParseException: The markup in the document following the root element must be well-formed.
         at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
         at org.apache.xerces.util.ErrorHandlerWrapper.fatalError(Unknown Source)
         at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
         at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
         at org.apache.xerces.impl.XMLScanner.reportFatalError(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentScannerImpl$TrailingMiscDispatcher.dispatch(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
         at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
         at org.apache.commons.digester.Digester.parse(Digester.java:1548)
         at org.apache.catalina.startup.ContextConfig.applicationConfig(ContextConfig.java:263)
         at org.apache.catalina.startup.ContextConfig.start(ContextConfig.java:624)
         at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:216)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4290)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
         at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:277)
         at org.apache.catalina.core.StandardHost.install(StandardHost.java:832)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:701)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:432)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
         at org.apache.catalina.core.StandardService.start(StandardService.java:480)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
    Oct 12, 2005 2:04:24 PM org.apache.catalina.startup.ContextConfig applicationConfig
    SEVERE: Parse error in application web.xml
    org.xml.sax.SAXParseException: The markup in the document following the root element must be well-formed.
         at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
         at org.apache.commons.digester.Digester.parse(Digester.java:1548)
         at org.apache.catalina.startup.ContextConfig.applicationConfig(ContextConfig.java:263)
         at org.apache.catalina.startup.ContextConfig.start(ContextConfig.java:624)
         at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:216)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4290)
         at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
         at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
         at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
         at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:277)
         at org.apache.catalina.core.StandardHost.install(StandardHost.java:832)
         at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:701)
         at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:432)
         at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
         at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
         at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
         at org.apache.catalina.core.StandardService.start(StandardService.java:480)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
    Oct 12, 2005 2:04:24 PM org.apache.catalina.startup.ContextConfig applicationConfig
    SEVERE: Occurred at line 16 column 2
    Oct 12, 2005 2:04:24 PM org.apache.catalina.startup.ContextConfig start
    SEVERE: Marking this application unavailable due to previous error(s)
    Oct 12, 2005 2:04:24 PM org.apache.catalina.core.StandardContext start
    SEVERE: Error getConfigured
    Oct 12, 2005 2:04:24 PM org.apache.catalina.core.StandardContext start
    SEVERE: Context startup failed due to previous errors
    Oct 12, 2005 2:04:24 PM org.apache.catalina.core.StandardHostDeployer install
    INFO: Installing web application at context path /servlets-examples from URL file:C:\Program Files\Apache Software Foundation\Tomcat 5.0\webapps\servlets-examples
    Oct 12, 2005 2:04:25 PM org.apache.catalina.core.StandardHostDeployer install
    INFO: Installing web application at context path /tomcat-docs from URL file:C:\Program Files\Apache Software Foundation\Tomcat 5.0\webapps\tomcat-docs
    Oct 12, 2005 2:04:25 PM org.apache.catalina.core.StandardHostDeployer install
    INFO: Installing web application at context path /webdav from URL file:C:\Program Files\Apache Software Foundation\Tomcat 5.0\webapps\webdav
    Oct 12, 2005 2:04:26 PM org.apache.coyote.http11.Http11Protocol start
    INFO: Starting Coyote HTTP/1.1 on http-8000
    Oct 12, 2005 2:04:26 PM org.apache.jk.common.ChannelSocket init
    INFO: JK2: ajp13 listening on /0.0.0.0:8009
    Oct 12, 2005 2:04:26 PM org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/62 config=C:\Program Files\Apache Software Foundation\Tomcat 5.0\conf\jk2.properties
    Oct 12, 2005 2:04:26 PM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 9953 ms
    <ERROR> http-8000-Processor25:ConfigSharedMem.setConfigMem() \tomcat5\webapps\sms\smsconfig.xml (The system cannot find the path specified)
    java.io.FileNotFoundException: \tomcat5\webapps\sms\smsconfig.xml (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at java.io.FileInputStream.<init>(FileInputStream.java:66)
         at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:70)
         at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:161)
         at org.apache.xerces.impl.XMLEntityManager.setupCurrentEntity(Unknown Source)
         at org.apache.xerces.impl.XMLVersionDetector.determineDocVersion(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
         at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
         at com.eprimes.sms.config.ConfigSharedMem.setConfigMem(ConfigSharedMem.java:61)
         at com.eprimes.sms.config.ConfigSharedMem.<init>(ConfigSharedMem.java:44)
         at com.eprimes.sms.mvc.ServletFactory.executeCommand(ServletFactory.java:417)
         at com.eprimes.sms.mvc.ServletFactory.executeMVC(ServletFactory.java:325)
         at com.eprimes.sms.mvc.ServletFactory.doPost(ServletFactory.java:309)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:595)
    <ERROR> http-8000-Processor25:DaoLogin.login() Name smsdb is not bound in this Context
    javax.naming.NameNotFoundException: Name smsdb is not bound in this Context
         at org.apache.naming.NamingContext.lookup(NamingContext.java:768)
         at org.apache.naming.NamingContext.lookup(NamingContext.java:151)
         at com.eprimes.common.DBConnect.getConnection(DBConnect.java:30)
         at com.eprimes.sms.login.dao.DaoLogin.login(DaoLogin.java:45)
         at com.eprimes.sms.login.bizprocess.BizLogin.login(BizLogin.java:27)
         at com.eprimes.sms.mvc.login.LoginCmd.execute(LoginCmd.java:70)
         at com.eprimes.sms.mvc.ServletFactory.executeCommand(ServletFactory.java:507)
         at com.eprimes.sms.mvc.ServletFactory.executeMVC(ServletFactory.java:325)
         at com.eprimes.sms.mvc.ServletFactory.doPost(ServletFactory.java:309)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:595)
    <ERROR> http-8000-Processor25:ConfigSharedMem.setConfigMem() \tomcat5\webapps\sms\smsconfig.xml (The system cannot find the path specified)
    java.io.FileNotFoundException: \tomcat5\webapps\sms\smsconfig.xml (The system cannot find the path specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at java.io.FileInputStream.<init>(FileInputStream.java:66)
         at sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:70)
         at sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:161)
         at org.apache.xerces.impl.XMLEntityManager.setupCurrentEntity(Unknown Source)
         at org.apache.xerces.impl.XMLVersionDetector.determineDocVersion(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
         at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
         at com.eprimes.sms.config.ConfigSharedMem.setConfigMem(ConfigSharedMem.java:61)
         at com.eprimes.sms.config.ConfigSharedMem.<init>(ConfigSharedMem.java:44)
         at com.eprimes.sms.login.bizprocess.BizLogin.login(BizLogin.java:36)
         at com.eprimes.sms.mvc.login.LoginCmd.execute(LoginCmd.java:70)
         at com.eprimes.sms.mvc.ServletFactory.executeCommand(ServletFactory.java:507)
         at com.eprimes.sms.mvc.ServletFactory.executeMVC(ServletFactory.java:325)
         at com.eprimes.sms.mvc.ServletFactory.doPost(ServletFactory.java:309)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:595)
    <ERROR> http-8000-Processor25:ServletFactory.executeMVC() getAttribute: Session already invalidated
    java.lang.IllegalStateException: getAttribute: Session already invalidated
         at org.apache.catalina.session.StandardSession.getAttribute(StandardSession.java:975)
         at org.apache.catalina.session.StandardSessionFacade.getValue(StandardSessionFacade.java:118)
         at com.eprimes.sms.login.bizprocess.BizLogin.login(BizLogin.java:40)
         at com.eprimes.sms.mvc.login.LoginCmd.execute(LoginCmd.java:70)
         at com.eprimes.sms.mvc.ServletFactory.executeCommand(ServletFactory.java:507)
         at com.eprimes.sms.mvc.ServletFactory.executeMVC(ServletFactory.java:325)
         at com.eprimes.sms.mvc.ServletFactory.doPost(ServletFactory.java:309)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:595)
    regards

    Thank you.
    But in the same time - when I see in alert log those error messages ora -12560, 12537,12535,12570 and so on - clients programs, whiie try to connect, hang up.
    For sql plus takes 20 minutes to connect.
    lsnrctl status gives the following
    LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 04-FEB-2013 16:01
    :46
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx-BD.mosxxx
    .elektra.net)(PORT=1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
    ction
    Start Date 01-FEB-2013 10:22:48
    Uptime 3 days 5 hr. 39 min. 54 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\Oracle\listener.ora
    Listener Log File c:\oracle\diag\tnslsnr\xxx-BD\listener\alert\l
    og.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxx-BD.mosxxx.elektra.net)
    (PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "XXX" has 2 instance(s).
    Instance "XXX", status UNKNOWN, has 1 handler(s) for this service...
    Instance "xxx", status READY, has 1 handler(s) for this service...
    Service "XXXDB" has 1 instance(s).
    Instance "xxx", status READY, has 1 handler(s) for this service...
    The command completed successfully
    To tell the truth I am confuse - I thought I have only 1 service "XXXDB" and 1 instance - "xxx".
    May be I have wrong entries in tnslsnr.ora?

  • How to check particular error in alert log file

    Hi all,
    How to check particular error in alert log file,for supose if i get error in batabase yesterday 4 pm & today i want to check alert log file to get basic idea..it might be a big file so how to check that particular error..
    Thanks & regards,
    Eswar..

    What's your oracle version?
    If you are in 11g you can use adrci tool
    1- set homes diag/rdbms/orawiss/ORAWISS/ : the rdbms home
    2- show alert -P "MESSAGE_TEXT LIKE '%ORA-%'" -term : to find all the ORA-% errors in the alert file
    3- show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-51 " -term : to find all the ORA-% errors in the alert file during the last 51 days,
    4- show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-1/24 " -term : to find all the ORA-% errors in the alert file during the last hour,
    5- show alert -P "MESSAGE_TEXT LIKE '%ORA-12012%' and originating_timestamp > systimestamp-1/24 " -term : to find the particular ORA-12012 error in the alert file during the last hour,
    Example:
    [oracle@wissem wissem]$ adrci
    ADRCI: Release 11.2.0.1.0 - Production on Wed May 4 10:24:54 2011
    Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
    ADR base = "/home/oracle/app/oracle"
    adrci> set homes diag/rdbms/orawiss/ORAWISS/
    adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-'" -term
    ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
    adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-%'" -term
    ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
    2010-12-11 19:45:41.289000 +01:00
    ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01152: file 1 was not restored from a sufficiently old backup
    ORA-01110: data file 1: '/home/oracle/app/oracle/oradata/ORAWISS/system01.dbf'
    ORA-1547 signalled during: ALTER DATABASE RECOVER  database until time '2011-01-21:10:48:00'  ...
    Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j000_5692.trc:
    ORA-12012: error on auto execute of job 29
    ORA-01435: user does not exist
    2011-03-15 11:39:37.571000 +01:00
    opiodr aborting process unknown ospid (31042) as a result of ORA-609
    2011-03-15 12:04:15.111000 +01:00
    opiodr aborting process unknown ospid (3509) as a result of ORA-609
    adrci>
    adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-51 " -term
    ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
    2011-03-15 10:19:45.316000 +01:00
    Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j006_5536.trc:
    ORA-12012: error on auto execute of job 26
    ORA-01435: user does not exist
    Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j000_5692.trc:
    ORA-12012: error on auto execute of job 29
    ORA-01435: user does not exist
    2011-03-15 11:39:37.571000 +01:00
    opiodr aborting process unknown ospid (31042) as a result of ORA-609
    2011-03-15 12:04:15.111000 +01:00
    opiodr aborting process unknown ospid (3509) as a result of ORA-609
    adrci>

  • Error opening installation log file.

    ProblemYou are unable to install BlackBerry Desktop Manager and the following error message is displayed when you open the installation log file:
    Error opening installation log file verify that the specified log file exist and is writable.
    ResolutionTo resolve this issue, edit the system environment variables by completing the following steps:
    Warning: The following procedure requires modifying the computer environment variables. This can result in unexpected system behavior. Document the existing values prior to implementing any changes. To search for the Install.log file or files in the temp folder:
    On the Start menu, click Run and type %temp%.
    Click OK.
    In the Temp folder, click Search and then All files and folders. In the All or part of the file name field, type Install.log and set the Look in field value to Temp. 
    Click Search.
    If the Install.log file is found, delete it.
    In Windows® Explorer, go to the C:\ drive and create a new folder called TEMP2.
    Open the Control Panel and double-click the System icon.
    On the Advanced tab, click Environment Variables.
    In the User variables list, select TEMP and click Edit.
    In the Variable value field, change the file path to C:\TEMP2 and click OK.
    In the User variables list, select TMP and click Edit.
    In the Variable value field, change the file path to C:\TEMP2 and click OK.
    In the Environment Variables window, click OK.
    In the System Properties window, click Apply and then OK.
    Restart the computer for the changes to take effect. 
    Repeat the installation procedure for BlackBerry Desktop Manager.
    I have 8330

    hello,
    another solution is here :
    http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • TRYING TO INSTALL adobe photoshop elements8 AND IM GETTING error opening installation log file. verify that the specified location exists and is writable

    TRYING TO INSTALL adobe photoshop elements8 AND IM GETTING error opening installation log file. verify that the specified location exists and is writable

    Error opening installation log file | Windows

  • Configure Email through OEM when there is a error in alert log file

    Hi,
    I am using 10.2.0.4 on O/S RHEL5.0
    I want to configure email facility through OEM so that whenever there is a error in alert log file i should receive an email.
    Thanks and Regards
    Amith

    http://www.dba-oracle.com/oracle10g_tuning/t_oem_tuning.htm
    Please read above link.
    Regards
    Girish Sharma

  • Create database fails with error ORA-01505: error in adding log files

    hi all,
    hope someone can help me out, I'm trying to create a database using a SQL script, the content of the script is:
    create database testora
    user sys identified by oracle
    user system identified by oracle
    logfile group 1 ('/u01/app/oracle/oradata/testora/redo01a.log', '/u02/app/oracle/oradata/testora/redo01b.log') size 100m blocksize 512 reuse,
         group 2 ('/u01/app/oracle/oradata/testora/redo02a.log', '/u02/app/oracle/oradata/testora/redo02b.log') size 100m blocksize 512 reuse,
         group 3 ('/u01/app/oracle/oradata/testora/redo03a.log', '/u02/app/oracle/oradata/testora/redo03b.log') size 100m blocksize 512 reuse,
    maxlogfiles 5
    maxlogmembers 5
    maxdatafiles 100
    character set US7ASCII
    national character set AL16UTF16
    extent management local
    datafile '/u01/app/oracle/oradata/testora/system01.dbf' size 400m reuse
    sysaux datafile '/u01/app/oracle/oradata/testora/sysaux01.dbf' size 400m reuse
    default tablespace users
         datafile '/u02/app/oracle/oradata/testora/users01.dbf' size 500m reuse autoextend on maxsize unlimited
    default temporary tablespace tempts1
         tempfile '/u01/app/oracle/oradata/testora/temp01.dbf' size 20m reuse autoextend on maxsize 4g
    undo tablespace undotbs1
         datafile '/u01/app/oracle/oradata/testora/undotbs01.dbf' size 200m reuse autoextend on maxsize unlimited
    It fails in creating the database with the following output:
    SQL> @/home/oracle/Oracle_Scripts/testora_db_script.sql
    create database testora
    ERROR at line 1:
    ORA-01092: ORACLE instance terminated. Disconnection forced
    ORA-01501: CREATE DATABASE failed
    ORA-01505: error in adding log files
    ORA-01184: logfile group 1 already exists
    Process ID: 3486
    Session ID: 1 Serial number: 3

    sorry to revive this thread but i have one more issue with this. I created a database with DBCA insetead of CREATE DATABASE command and selected option for Fast Recovery Area space. This automatically set initialization parameter db_recovery_file_dest and db_recovery_file_dest_size, but did not create a OMF redo log group, but instead created three redo log groups with 1 member each.
    select * from v$logfile returns:
    1          ONLINE     /u01/app/oracle/oradata/testdb2/redo01.log     NO
    2          ONLINE     /u01/app/oracle/oradata/testdb2/redo02.log     NO
    3          ONLINE     /u01/app/oracle/oradata/testdb2/redo03.log     NO
    Any idea why if creating a database with create database command and specifying db_recovery_file_dest creates an OMF redo log group and with DBCA it doesn't?

  • Error in UCM log file

    We are using ucm to save our documents. We found that there is one error appearing multiple times in UCM log files.
    Work-flow is not enabled but still it says wfStepCheckinType parameter not found.
    Here is the complete stack trace.
    Cannot find the parameter 'wfStepCheckinType'. stack trace [ Details ]
    An error has occurred. The stack trace below shows more information.
    !syParameterNotFound,wfStepCheckinType!$stack trace   
    !$stack trace   
        at intradoc.common.IdcLogWriter.doMessageAppend(IdcLogWriter.java:85)
        at intradoc.common.Log.addMessage(Log.java:279)
        at intradoc.common.DefaultReportHandler.message(DefaultReportHandler.java:508)
        at intradoc.common.DefaultReportDelegator.message(DefaultReportDelegator.java:140)
        at intradoc.common.Report.messageInternal(Report.java:172)
        at intradoc.common.Report.message(Report.java:145)
        at intradoc.common.Report.error(Report.java:408)
        at collections.CollectionUserHandler$8.getStringValue(CollectionUserHandler.java:5971)
        at collections.ResultSetWrapper.getStringValue(ResultSetWrapper.java:415)
        at intradoc.data.ResultSetUtils.getValue(ResultSetUtils.java:389)
        at collections.CollectionStructure.canWrite(CollectionStructure.java:4137)
        at collections.CollectionUserHandler.loadCollectionPermissions(CollectionUserHandler.java:6160)
        at sun.reflect.GeneratedMethodAccessor1576.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at intradoc.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:86)
        at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:324)
        at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
        at intradoc.server.Service.doCodeEx(Service.java:603)
        at intradoc.server.Service.doCode(Service.java:575)
        at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1643)
        at intradoc.server.Service.doAction(Service.java:547)
        at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1458)
        at intradoc.server.Service.doActions(Service.java:542)
        at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1391)
        at intradoc.server.Service.executeActions(Service.java:528)
        at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:737)
        at intradoc.server.Service.doRequest(Service.java:1956)
        at intradoc.server.ServiceManager.processCommand(ServiceManager.java:437)
        at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
        at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Any suggestions?
    Thanks
    Sanjeev.

    Hi Sanjeev ,
    This issue is seen on WCC 11.1.1.6.0 + patch 15922432 when non-admin users were checking in content items .
    It was fixed and new patch released for the same . You can access it from the following link : https://support.oracle.com/epmos/faces/PatchDetail?patchId=17319434
    Apply the patch and restart server to confirm the issue is fixed .
    Thanks,
    Srinath

  • Error in sql_engine_core_inst_Cpu64_1.log file for SQL Server 2012

    I was running SQL Server 2012 in Win 7 64 bit OS. Some how I found SQLSERVER server is not running and I was not able to run the service. Then I tried to unisntall and install again. And I found that some of the SQL Server
    features got failed,  like: Reporting Services - Native, Database Engine Services, Data Quality Services, Full-Text and Semantic Extractions for Search and SQL Server Replication. I checked the Summary.txt
    file from location C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log. It thsi logs referes to another log file location like: 
    Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          1639
      Component log file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140127_151409\sql_engine_core_inst_Cpu64_1.log
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=sql_engine_core_inst.msi%400x162A16FE%400x1639
    I did unisntall/install multipel times. But fhw to fix the issue that saying in sql_engine_core_inst_Cpu64_1.log file.: 
    === Verbose logging started: 1/27/2014  15:45:04  Build type: SHIP UNICODE 5.00.7601.00  Calling process: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\x64\ScenarioEngine.exe ===
    MSI (c) (C4:BC) [15:45:04:321]: Resetting cached policy values
    MSI (c) (C4:BC) [15:45:04:321]: Machine policy value 'Debug' is 0
    MSI (c) (C4:BC) [15:45:04:321]: ******* RunEngine:
               ******* Product: E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
               ******* Action: 
               ******* CommandLine: **********
    MSI (c) (C4:BC) [15:45:04:322]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (C4:BC) [15:45:04:322]: Grabbed execution mutex.
    MSI (c) (C4:BC) [15:45:04:323]: Cloaking enabled.
    MSI (c) (C4:BC) [15:45:04:323]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (C4:BC) [15:45:04:323]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (38:8C) [15:45:04:327]: Running installation inside multi-package transaction E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
    MSI (s) (38:8C) [15:45:04:327]: Grabbed execution mutex.
    MSI (s) (38:A0) [15:45:04:327]: Resetting cached policy values
    MSI (s) (38:A0) [15:45:04:327]: Machine policy value 'Debug' is 0
    MSI (s) (38:A0) [15:45:04:327]: ******* RunEngine:
               ******* Product: E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
               ******* Action: 
               ******* CommandLine: **********
    MSI (s) (38:A0) [15:45:04:452]: Machine policy value 'TransformsSecure' is 0
    MSI (s) (38:A0) [15:45:04:452]: User policy value 'TransformsAtSource' is 0
    MSI (s) (38:A0) [15:45:04:475]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (38:A0) [15:45:04:475]: Specified instance {18B2A97C-92C3-4AC7-BE72-F823E0BC895B} via transform :InstID01.mst;:InstName02.mst is already installed. MSINEWINSTANCE requires a new instance that is not installed.
    MSI (s) (38:A0) [15:45:04:475]: MainEngineThread is returning 1639
    MSI (s) (38:8C) [15:45:04:477]: User policy value 'DisableRollback' is 0
    MSI (s) (38:8C) [15:45:04:477]: Machine policy value 'DisableRollback' is 0
    MSI (s) (38:8C) [15:45:04:477]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (38:8C) [15:45:04:478]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 
    MSI (s) (38:8C) [15:45:04:478]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 
    MSI (s) (38:8C) [15:45:04:478]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (38:8C) [15:45:04:478]: Restoring environment variables
    MSI (c) (C4:BC) [15:45:04:481]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (C4:BC) [15:45:04:481]: MainEngineThread is returning 1639
    === Verbose logging stopped: 1/27/2014  15:45:04 ===
    Please advice. I searched many places and did not get actual solution that will resolve my case.
    Nusrat Akhter

    Hi Nusrat Akhter,
    According to your description, when installing the first install failed, and it looks like the instance did not uninstall completely. To solve the issue I recommend you changed the instance name in re-installing SQL Server, and check if it can work fine.
    There is a similar issue that the SQL engine will not start, and there is no method of uninstalling either it, or any of the components etc. You can review the following post.
    https://connect.microsoft.com/SQLServer/feedback/details/710892/sql-server-2012-rc0-install-fails-citing-invalid-drivers
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Error in analyzer Log file (/sapdb/data/wrk/ACP/analyzer--- DBAN.err)

    Hello All,
    I am getting the following Error message in analyzer Log file (/sapdb/data/wrk/ACP/analyzer---> DBAN.err).
    the details are as follows:-
    =====================================================
    <i>2006-07-24 08:55:59
    ERROR 5: Cannot execute SQL statement.
    [MySQL MaxDB][LIBSQLOD SO][MaxDB] General error;-4008 POS(1) Unknown user name/password combination
    SELECT YEAR(NOW()),MONTH(NOW()),DAY(NOW()),HOUR(NOW()),MINUTE(NOW()),SECOND(NOW()) FROM DUAL
    2006-07-26 12:15:39
    ERROR 20: Database Analyzer not active in directory "/sapdb/data/wrk/ACP/analyzer".
    2006-08-03 12:33:08
    ERROR 5: Cannot execute SQL statement.
    [MySQL MaxDB][LIBSQLOD SO][MaxDB] Communication link failure;-709 CONNECT: (database not running: no request pipe)
    SELECT YEAR(NOW()),MONTH(NOW()),DAY(NOW()),HOUR(NOW()),MINUTE(NOW()),SECOND(NOW()) FROM DUAL</i>
    =====================================================
    can you please tell me what does that mean for my Database.
    The main problem that I am facing is I am not able to start my SAP application. when I issue startsap from <SID>adm login then I get error messag saying not able to connect to the database. Although the database is already up and running.
    Please help me !
    Regards,
    Premkishan chourasia

    Hi,
    well, the error -4008 denotes that the user/password combination used by the DB Analyzer for accessing the DB are incorrect. The DB Analyzer tries to issue SQL commands with the SYSDBA user.
    Do you know the user/password combination of your SYSDBA user?
    Regards,
    Roland

Maybe you are looking for