Errors on Oracle HTTP_Server

Receiving errors under the HTTP_Server component of a new Linux Grid install (patched to 10.2.0.2) relating to the following:
"Percentage of Requests that Were Failures" and "Percentage of Requests Resulted in Internal Errors" which according to the help are "The percentage of total number of requests routed for all the mount points that were failed requests" and "The percentage of total number of requests routed for all the Mount Points that resulted in internal errors" respectively. Any one know where to look to try to decipher the cause of these? This is the first install we've done using RAC. I've done a number of pervious installs with everything on one server and have never seen this issue before. Thanks.

Very curious if anyone has input to original question. I am in the same position - I've recently installed 10.2 GC and seeing the same alerts. I have not even been able to determine which log file is being parsed to raise these alerts. Perhaps if I knew that I would look at the errors and research from there.
Thanks in advance...

Similar Messages

Getting the following error in Oracle 10g B2B reports, need help where to look into for resolution!

Hi All,
I am new to B2B. I am getting following error in B2B Console please suggest what could be the reason and possible steps to resolve:
Machine Info: (fcgemapptest05)
Description: General Error
StackTrace:
Error -: AIP-50014: General Error
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1194)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:836)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:402)
at java.lang.Thread.run(Thread.java:534)
Regards,
Sujan

Can you tell me what's the status of components (value of "In sync" column) when you run "dcmctl getState" command?
Thanks
Shail

Error --REP-3000: Internal error starting Oracle Toolkit.

Hi
While submitting the concurrent request (active user) im getting error if i submit the active responsibilities
its completed successfully i have set display also still im getting error.
Xlib: connection to "omega:0.0" refused by server
Xlib: Client is not authorized to connect to Server
Xlib: connection to "omega:0.0" refused by server
Xlib: Client is not authorized to connect to Server
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.

Please verify the DISPLAY on the server as follows:
- Issue "xhost +" as root user
- Issue "xclock" as applmgr user --> Make sure you can display the clock
If the above does not work, please set the DISPLAY properly in the application context file and run AutoConfig.
More details can be found in the following note:
Note: 200474.1 - Comprehensive REP-3000 Troubleshooting and Overview Guide
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200474.1

Database Error: DBD::Oracle::db do failed: ORA-04030: out of process memory

Hi
I have a stored procedure that uses the XMLQuery function (SELECT XMLQuery( '......' RETURNING CONTENT) FROM dual; ) to extract data from 3 different tables and store the xml file in XML DB. This store procedure was running fine for a long time until 2 weeks ago where I started seeing the following error:
Database Error: DBD::Oracle::db do failed: ORA-04030: out of process memory when trying to allocate 92 bytes (koh dur heap d,qmxtkWriteXobToOpn:heap)
Currently I have 16,000 records. I am not sure what is going on, the size of the previous successful output xml file is about 2M. I also noticed when the stored procedure runs with 3G of system memory available, it basically used up all the memory and cpu time. The store proc consistently dies after 3.5 hour and spits out the ORA-04030 out of process memory error.
Does anyone have any suggestion what to look for or what parameters I need to set? Thanks

Unless your database is strictly a DSS-type of database, your AWR report exposes loads of issues with it. And I think none of the time during the AWR window was spent on database. Look at the DB time (with all those multi cores) compared with the elapsed time of the AWR.
As you are on 11g, why not make use of MEMORY_TARGET (a single parameter to manage both SGA and PGA)? If you are already on it, ignore this as I can't see it anywhere. If not, get rid of SGA_TARGET and PGA_AGGREGATE_TARGET and replace it with a single MEMORY_TARGET parameter. However you may have a minimum threshold set for different SGA pools so that they won't shrink beyond that point.
Having said that, setting MEMORY_TARGET is not a guarantee to avoid ORA-4030. Just a single bad PL/SQL code could go and exploit the untunable part of your process memory and even go and blow up the physical memory. If you are using FORALL and BULK load, see if you can cut it down into few chunks rather than running as a single process.
What does your V$PGASTAT say?

Error in Oracle API HZ_CUST_ACCOUNT_V2PUB.create_cust_account

Error in Oracle API HZ_CUST_ACCOUNT_V2PUB.create_cust_account
Column account_number must have a value.
why?

What is the apps version ?
Have you gone through these notes:
Using TCA API's Including Examples [ID 201243.1]
How To Create A Customer Via TCA API [ID 159393.1]

Deployment Manager Error with Oracle Weblogic Server 10.3.1

I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AM

You are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing.

Error starting Oracle BAM active data cache service

Hi
after installing BAM every thing working fine ,but if restart my system Oracle BAM active data cache service throwing following error
"The Oracle BAM Active Data Cache service on Local computer started and then stopped.Some services stop automatically if they have no work to do,for example the performance logs and alerts service"
Database is running fine
Following is the ADC log file error
2007-12-07 17:19:29,640 [2928] ERROR - ActiveDataCache The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> System.DllNotFoundException: Unable to load DLL (OraOps10.dll).
at Oracle.DataAccess.Client.OpsTrace.GetRegTraceInfo(UInt32& TrcLevel, UInt32& StmtCacheSize)
at Oracle.DataAccess.Client.OraTrace.GetRegistryTraceInfo()
at Oracle.DataAccess.Client.OracleConnection..ctor(String connectionString)
at Oracle.DataAccess.Client.OracleConnection..ctor(String connectionString)
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleDataFactory.GetConnection()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
--- End of inner exception stack trace ---
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
2007-12-07 17:24:45,250 [1524] ERROR - ActiveDataCache Unable to load DLL (OraOps10.dll).
2007-12-07 17:24:45,265 [1524] WARN - ActiveDataCache Exception occurred in method Startup
Please help me in resolving this issue .Am getting this issue every time
Thanks
BS

Make sure the path to the ODAC used by BAM (C:\OracleBAM\ClientForBAM\bin) is the first item in the system PATH
environment variable. Restart your computer after fixing this.
If that doesn't fix it, please check the Troubleshooting section in the BAM Install Guide.
Regards, Stephen

Getting error in Oracle EDQP Webservice call using Soap UI

Hi ,
I am trying to use Oracle EDQP webservice : http://<<hostname>>:<<port>>/datalens/ws/Processor
when i trying to access the processOneLine or processList operation, i am getting the follwing error:
<faultstring>oracle.pdq.api1.minicore.SaDetailException: 1318: Invalid job step - Either you must specify a step name when there are multiple output steps or there are no output steps that return a result.
Code: 1318
Details: Either you must specify a step name when there are multiple output steps or there are no output steps that return a result.</faultstring>
Please help me to resolve this issue.
Thanks in Advance.
- Raj

Hi Raj,
Not sure if this is already resolved.
Seems your DSA has atleast 2 outputs. As of Version 11.1.1.6.1 the webervice allows calls to DSAs with only 1 output. So your options are:
Combine your outputs to single output
Use other integration methods
Hope this helps.
Thanks!
Anand Lonkar

ODBC error in oracle 11g

Hi all.
I have installed oracle 11g release 2 64 bit on my system and also installed Informatica powercenter 9.1. the informatica repository is in oracle database. I have configured informatica perfectly since i could run workflow when connecting to flat files etc. i am having problem when i am trying to connect informatica to oracle source system and receiving following error the oracle(tm) client and networking components were not found. I read in many forums posts and realized i should install oracle client. I am encountering issues once the client is installed on my system. the issue is that my repository and integration server stops in informatica powercenter. the error log says TNS could not be resolved. then i tried to log in to database server "sys as sysdba" i am receiving error "ORA-01031: insufficient privileges ". I have done following things to resolve my error
1) checked my user is in ora_dba group
2) checked sqlnet.ora file SQLNET.AUTHENTICATION_SERVICES= (NTS)
I dont know where to start to now fix this error. I have some questions Is there a problem installing both server and client on the same machine.
Your help will be greatly appreciated.
P.s I am not sure whether this to redirected to informatica forums or oracle forums so my apologizes if i am in a wrong place.
Regards
Rajkumar

Hi Rajkumar,
I suspect you're actually using 32 bit components, as I've only ever seen the error message you've posted "oracle(tm) client and networking components were not found" come from Microsoft ODBC or OLEDB provider for Oracle, and those only come in 32 bit. The fact that they got loaded in the first place and didnt find the client indicates the process is 32 bit.
You'll first need to determine for sure whether the process that needs connectivity is 32 bit or 64 bit, then install that bit-ness of Oracle client. You can also install both a 32 bit and a 64 bit client, and in some cases you need both. If you're running it ON the database machine and already have a 64 bit database, that already includes a 64 bit client.
In either case, you can probably just go with the 11201 client.. Here's the link, click "see all" to get to the client download:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Hope it helps,
Greg
Edited by: gdarling on Oct 15, 2012 7:40 AM

Error Message: oracle/jbo/html/databeans/Res

I have copied required JAR and ZIP files into the /lib directory of Java Web Server. Classpath is also pointed to that. I am getting the first screen of JSP with menu on left side but I am getting "Error Message: oracle/jbo/html/databeans/Res" if I am trying to run any JSP having NavigationBar WebBean..Any Ideas. Otherwise
null

This is a new library with Jdev 9.0.3,
bc4j_jclient_common.jar.
iAS 9.0.2 doesn't include this file.

Getting ORA-06512: at "APPS.FND_MSG_PUB", line 279 error in Oracle Sourcing

Hi,
We have recently applied Sourcing Rollup 2 J patch in our instance. After this, when the users change their timezone, the system behaves weirdly. The Server timezone and Client timezone are set to Dubai timezone (GMT+4) at site level. If the user is using this timezone, there is no issues. But when the user changes the timezone to something else (anything > GMT+4 or anything < GMT+4), he cannot publish auctions. He is getting error like:
oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "APPS.FND_MSG_PUB", line 279
ORA-06512: at "APPS.HZ_TIMEZONE_PUB", line 877
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "APPS.FND_MSG_PUB", line 279
ORA-06512: at "APPS.HZ_TIMEZONE_PUB", line 1088
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "APPS.PON_OEX_TIMEZONE_PKG", line 41
ORA-06512: at "APPS.PON_AUCTION_PKG", line 1052
ORA-06512: at line 1
We feel like this is some issues with the system. Some times, this works, sometimes different kind of errors are seen. When user is trying to log in, another error like the following is seen:
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: SQL_PLSQL_ERROR. Tokens: ROUTINE = AppsConnectionManager.appsInitialize(int,int,int,int,Connection):-1,-1,-1,0,oracle.jdbc.driver.OracleConnection@192a848; REASON = java.sql.SQLException: ORA-20001: Oracle error -6502: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
has been detected in FND_GLOBAL.INITIALIZE.
ORA-06512: at "APPS.APP_EXCEPTION", line 70
ORA-06512: at "APPS.FND_GLOBAL", line 64
ORA-06512: at "APPS.FND_GLOBAL", line 1028
ORA-06512: at "APPS.FND_GLOBAL", line 541
ORA-06512: at line 1
When we bounced server, this error went away. But the first error still persists. What could be the reason for this?
Regards,
Arun

I traced through the packages. Here is the result:
1. PON_AUCTION_PKG line 1052;
x_newstarttime := PON_OEX_TIMEZONE_PKG.CONVERT_TIME(p_open_bidding_date,x_oex_timezone,x_timezone);
'x_oex_timezone' is the 'Server Timezone' profile value at site level. 'x_timezone' is the user's timezone. If the user's timezone is not a valid zone (checking done in PON_OEX_TIMEZONE_PKG.VALID_ZONE procedure), this param is assigned the value of 'x_oex_timezone'.
2. The PON_OEX_TIMEZONE_PKG.CONVERT_TIME procedure calls the procedure HZ_TIMEZONE_PUB.Get_Time(), and I hope here the issue starts. The OUT parameters to this procedure are toDate, status, msg_count and msg_data. Note that here the msg_data is defined as VARCHAR2(100).
3. Within the procedure HZ_TIMEZONE_PUB.Get_Time(), the error is raised from line 877. This is a WHEN OTHERS case of this procedure. This is from the API ;
FND_MSG_PUB.Count_And_Get(
p_encoded => FND_API.G_FALSE,
p_count => x_msg_count,
p_data => x_msg_data);
4. Next error from FND_MSG_PUB is from line 279. This is within the procedure FND_MSG_PUB.Count_And_Get, when executing the following statement:
p_data := Get ( p_msg_index => G_FIRST ,
p_encoded => p_encoded );
5. The 'GET' procedure, sets the value from global table 'G_msg_tbl( G_msg_index ).encoded_message ' to the p_data variable, and here is a potential slippage. The global variable can hold a value of upto 2000 characters. But the p_data is originally defined to be of size VARCHAR2(100). I think this can cause the issue. I am not sure what is the message getting assigned to the global variable here.
Could this be the problem? Inside the code, some assignments to fnd_mesage are done. But some of those messages are not present in our database (fnd_new_messages). Any clue on this would be greatly helpful.
Thanks,
Arun

Error in Oracle 10g (10.0.3) in Servlet Filtering

Hi
I found this error on oracle 10g (10.0.3) Version. my same code is working on 9.0.4 can you please tell what is the problem? I am using servlet filtering.
Mine is swing base application which will call applet and this will call Servlet.
500 Internal Server Error
java.lang.IllegalStateException: dispatcher chain is empty
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.EvermindHttpServletRequest.getCurrentDispatcher(EvermindHttpServletRequest.java:3975)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.EvermindHttpServletRequest.getParameters(EvermindHttpServletRequest.java:1393)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.EvermindHttpServletRequest.getParameter(EvermindHttpServletRequest.java:2126)
     at com.fmr.cfit.security.IdentityAgent.getUserIdFromParameter(Unknown Source)
     at com.fmr.cfit.security.IdentityAgent.getUserId(Unknown Source)
     at com.fmr.cfit.security.IdentityAgent.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.FileRequestDispatcher.handleWithFilter(FileRequestDispatcher.java:130)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.FileRequestDispatcher.forwardInternal(FileRequestDispatcher.java:210)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:824)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:291)
     at java.lang.Thread.run(Unknown Source)

I am able to resolve the issue:
The mistake I was doing was creating ORACLE_HOME in the enviornment variable, as I have Oracle 10 G database and SOA suite on the same machine, so it was creating a clash, the right approach is setting the ORACLE_HOME through command prompt, I was setting ORACLE_HOME because while executing the configure_oid.bat file it requires ORACLE_HOME to be set.
-Yatan

JDeveloper Error ! oracle.xml.sql.OracleXMLSQLException: Cannot map Unicode

Hi All,
I have 2 identical table structures with different data in Oracle.
I am using following xsql and XSLT sheet to produce xml files with these tables. ( have to run twice xsql file by changing the Table names )
When I run the xsql file with Table1, it works fine, produced the xml file on the browser.
But when I run the xsql file with Table2, it gives following error message:
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://192.10.1.14:8988/Workspace_ONIX-ONIX2-context-root/untitled1.xsql'. Line 1, Position 1
oracle.xml.sql.OracleXMLSQLException: Cannot map Unicode to Oracle character.
^
These two are my xsql and xslt files:
- - - - xsql file - - - -
<?xml version = '1.0' encoding = 'windows-1252'?>
<?xml-stylesheet type="text/xsl" href="TT14.xsl"?>
<xsql:query connection="Connection1" id-attribute="" tag-case="lower"
rowset-element="LIST" row-element="DEPA"
xmlns:xsql="urn:oracle-xsql">
SELECT * from TT26
</xsql:query>
TT14.xsl file
<xsl:stylesheet version="1.0" encoding="UTF-8" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method ="xml" indent= "yes" encoding="UTF-8"/>

<xsl:template match ="list">
<BBMessage>
<<xsl:for-each select="depa">
<Product>
<RecordReference>
<xsl:value-of select="wai"/>
</RecordReference>
<NotificationType>
<xsl:value-of select="wantype"/>
</NotificationType>
</Product>
</xsl:for-each>
</BBMessage>
</xsl:template>
</xsl:stylesheet>
All comments are highly welcomed...
Thanks

Hi Deepak
Thanks for the post, but I am afraid that's not the issue with the error.
I changed both encoding to "UTF-8" still i get the problem.
I tried even without the XSLT sheet, still I have the problem..
- - - - xsql file ---
<?xml version = '1.0' ?>

<page xmlns:xsql="urn:oracle-xsql" connection="Connection1">
<xsql:query max-rows="-1" null-indicator="no" tag-case="lower">
select * from Table2
</xsql:query>
</page>
- - - - Result ----
<?xml version="1.0" ?>
- 
- <page>
<error>oracle.xml.sql.OracleXMLSQLException: Cannot map Unicode to Oracle character.</error>
</page>
Any Comment ???
Thanks

Get more info about the last errors in Oracle

Hi all,
There is a log in a live system where it is possible to see every minute the following error:
Sweep Incident[48073]: failed, err=[1858]
I know that error can happen mainly when:
1. Trying to insert caracter field in a numeric column
2. Using in the wrong way the function to_date()
I need more information about that error, what can be causing the error in the system and why. Is it possible to see more information about the last errors in Oracle? For example, if a query produces an error... is it possible to see in Oracle the error and the query that caused the error?
Hope you can help me.
Thanks in advance.

Thanks Niall.
I'm not sure if I got you...
What I found is that MMON makes snapshots of the database 'health' and stores this information in the AWR. So, it seems like in the database there could be a numeric column that is storing character fields, and when MMON works, it finds that error... is that right?
I found the following information:
SQL> select substr(s.username,1,18) username,
2 substr(s.program,1,22) program,
3 decode(s.command,
4 0,'No Command',
5 1,'Create Table',
6 2,'Insert',
7 3,'Select',
8 6,'Update',
9 7,'Delete',
10 9,'Create Index',
11 15,'Alter Table',
12 21,'Create View',
13 23,'Validate Index',
14 35,'Alter Database',
15 39,'Create Tablespace',
16 41,'Drop Tablespace',
17 40,'Alter Tablespace',
18 53,'Drop User',
19 62,'Analyze Table',
20 63,'Analyze Index',
21 s.command||': Other') command
22 from
23 v$session s,
24 v$process p,
25 v$transaction t,
26 v$rollstat r,
27 v$rollname n
28 where s.paddr = p.addr
29 and s.taddr = t.addr (+)
30 and t.xidusn = r.usn (+)
31 and r.usn = n.usn (+)
32 order by 1;
USERNAME PROGRAM COMMAND
oracle@airvs1b (MMON) No Command
SQL> select addr, pid, spid, username, serial#, program,traceid, background, latchwait, latchspin from v$process where program='oracle@airvs1b (MMON)';
ADDR PID SPID USERNAME SERIAL# PROGRAM
000000044A4E48A8 24 15372 oracle 1 oracle@airvs1b (MMON)
TRACEID B LATCHWAIT LATCHSPIN
---------------- ---------- ------------------------ --------------- 1
SQL> select
2 substr(a.spid,1,9) pid,
3 substr(b.sid,1,5) sid,
4 substr(b.serial#,1,5) ser#,
5 substr(b.machine,1,6) box,
6 substr(b.username,1,10) username,
7 b.server,
8 substr(b.osuser,1,8) os_user,
9 substr(b.program,1,40) program
10 from v$session b, v$process a
11 where
12 b.paddr = a.addr
13 and a.spid=15372
14 order by spid;
PID SID SER# BOX USERNAME SERVER OS_USER PROGRAM
15372 1082 1 airvs1 DEDICATED oracle oracle@airvs1b (MMON)
Is there any way I can see what MMON is doing and when is failing?
Thank you very much.
Edited by: user11281526 on 19-jun-2009 5:18

Java.sql.SQLException: Internal Error: at oracle.sql.ARRAY.getArray(ARRAY.j

hi all,
I am getting the below exception
Basically i am registering an out parameters like this
cs.registerOutParameter(4, Types.ARRAY, "ISSUESECTION_LIST");
my database version: oracle 11.1.0.7.0.
I have created a synonym and given the execute privileges ,but also it comes up with the below exception
java.sql.SQLException: Internal Error
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.initCollElemTypeName(OracleTypeCOLLECTION.java:1026)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.getAttributeType(OracleTypeCOLLECTION.java:1056)
at oracle.jdbc.oracore.OracleNamedType.getFullName(OracleNamedType.java:110)
at oracle.jdbc.oracore.OracleTypeADT.createStructDescriptor(OracleTypeADT.java:2262)
at oracle.jdbc.oracore.OracleTypeADT.unpickle81(OracleTypeADT.java:1656)
at oracle.jdbc.oracore.OracleTypeUPT.unpickle81UPT(OracleTypeUPT.java:466)
at oracle.jdbc.oracore.OracleTypeUPT.unpickle81rec(OracleTypeUPT.java:416)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.unpickle81_imgBody_elems(OracleTypeCOLLECTION.java:979)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.unpickle81_imgBody(OracleTypeCOLLECTION.java:923)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.unpickle81(OracleTypeCOLLECTION.java:743)
at oracle.jdbc.oracore.OracleTypeCOLLECTION._unlinearize(OracleTypeCOLLECTION.java:242)
at oracle.jdbc.oracore.OracleTypeCOLLECTION.unlinearize(OracleTypeCOLLECTION.java:208)
at oracle.sql.ArrayDescriptor.toJavaArray(ArrayDescriptor.java:963)
at oracle.sql.ARRAY.getArray(ARRAY.java:370)
at com.db.gmr.eds.sm.jdbc.IssueSectionStoreJDBC.getResources(IssueSectionStoreJDBC.java:69)
at com.db.gmr.eds.handler.GetResources.handle(GetResources.java:126)
at com.db.gmr.eds.servlet.PageController.handle(PageController.java:138)
at com.db.gmr.eds.servlet.PageController.doGet(PageController.java:80)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:627)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at com.db.gmr.core.servlet.filters.TomcatParameterBugFix.doFilter(TomcatParameterBugFix.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:172)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.valves.FastCommonAccessLogValve.invoke(FastCommonAccessLogValve.java:500)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:200)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:291)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:775)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:704)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:897)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
at java.lang.Thread.run(Thread.java:619)
If i use cs.registerOutParameter(4, Types.ARRAY, "SCHEMA_OWNER_NAME.ISSUESECTION_LIST"); Then i wont be getting the error.
COULD ANYONE LET ME KNOW THE WORK AROUND OTHER THAN THE ABOVE SOLUTION LIKE ADDING THE OWNER SCHEMA NAME WITH THE USER DEFINED COLLECTION TYPE.

There couold be two reasons:
1) it depends how u have defined type. if ISSUESECTION_LIST is defined in type SCHEMA_OWNER, then you have to call this ways only 'SCHEMA_OWNER_NAME.ISSUESECTION_LIST'
2) You might have defined using schema_owner_name like scott.<TYPE_NAME>. if its so, then drop it and again define type without using schema owner.
For detail help post your type declaration.

Errors on Oracle HTTP_Server

Similar Messages

Maybe you are looking for