Errors were found when compiling the workflow

My company has consolodated many SharePoint sites into one with many subsites to save money. I ported my existing libraries from theold site to the new site (Same version of SP). The workflows did not go with the libraries, as expected. I re-created each
workflow, and every time have gotten the same error message: "Errors were found when compiling the workflow. The workflow files were saved but cannot run."
When I click Advanced I see some variation of the following:
(-1, -1) Compilation failed. Could not find file 'C:\Users\TEMP.*domain*\AppData\Local\Temp\ **and then a different .dll file every time'
I have not seen any other examples of this online. For some, creating a new task and history list for the workflow allowed it to compile, but not always.

Hi,
According to your post, my understanding is that Errors are found when compiling the workflow.
I recommend that you can check whether the file exists under the path 'C:\Users\TEMP.*domain*\AppData\Local\Temp\”.
If it exists, you can create a silmple workflow to check whether it works.
If it does work, you can add executionTimeout property in web.config file to increase the timeout interval(Make a copy of the web.config file before editing anything).
For more information, please refer to:
Manjuke's Blog: Fixed: SharePoint Designer Error - Unexpected error on server associating the workflow
SharePoint Designer 2010 Errors were found when compiling the workflow. The workflow files were saved but cannot be run. Unexpected error on server associating the workflow.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Similar Messages

Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

Greetings All,
I am having issues with a SharePoint Designer workflow. This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow. I'm developing this as a SharePoint 2010 workflow because I need to do
impersonation.
The environment and workflow have been running, in the past week, without issue. I went to add a couple steps and now I cannot publish the workflow. While in SharePoint Designer, I receive the error:
"Errors were found when compiling the workflow. The workflow files were saved but cannot be run." When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow."
That is all the error information I have available; nothing is in the log files.
I have investigated this error and tried the following:
Cleared the SharePoint Designer cache.
The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000. Restarted the servers (which may not have been necessary) and tried again receiving the same error. I then increased it to 30000 with the same error result.
Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
I reboot the servers and try again and now I can publish the small test workflow but not the original. However, neither will run. When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
An unexpected error occurs. I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
Also, now no workflows can be published in this web app. Not just the one I was working on but none of them!
Does anyone have a clue what has happened to the SharePoint 2010 workflow service? Or some suggestions for me to try?
Thank you in advance for your help!
Bob Mixon

try these links:
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
Hi Sagar,
I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
Your first link is specific to SharePoint 2013 workflows.
Your second link refers to the UserDefinedWorkflowMaximumComplexity. If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
Your third link also refers to large workflows with many approval activities. My workflow doesn't contain any approval activities.
And you fourth link refers to 2013 workflows not 2010.
My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
Thank you...

Errors were found when compiling workflow in SharePoint Designer 2010

Hello there,
I've run into a interesting issue in SharePoint Designer 2010 when publishing a workflow. I now get the below error
Normally when I get this message I simply clear the SharePoint Designer 2010 cache described in this
article, however, in this case the issue still continued. Hence I started the process of trial and error and quickly realized that the Update Item action was the culprit. In this action I am updating approximately 70 columns. Currently, I have two such
actions running in sequence. When I added the third Update Item action to do the same, I started getting this error.
Has anyone else experienced this before? In the workflow I am currently working on I am going to have to using the Update Item action several times and update approximately 70 columns hence I am open to other ideas to do the same.
Thanks in advance.

Hi Entan Ming,
Thanks for your reply, Hope you are aware that while we create any new workflow using SharePoint Designer 2013. There are two ways (We can say Platforms) to create the new workflow 1. SharePoint
2010 and 2. SharePoint 2013.
If I choose second one I. e SharePoint 2013, and try to create, save and publish workflow it`s working fine. But whenever I select option no. 1 i.e. SharePoint 2010 Platform to create
the workflow, I am able to Create it , save it , but while I try to publish it I got an error:
Errors were found when compiling the workflow. The workflow files were saved but cannot be run.
When I click on Advance I got message:
Unexpected error on server associating the workflow
My question is that, I am not able to publish any workflow in SharePoint 2010 Platform, using SharePoint Designer 2013.
Before publishing a workflow, I click on ‘Check for errors’ button, there was no any error found.
Thanks & Regards Mr. Bajirao Shinde

Errors when compiling the web service (SAP Web Service Design Tool)

After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PM

Hello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip]

Errors occured when compile the bpel process

Errors occurred when compile the bpel process using bpel designer for Eclipse:
(com.oracle.bpel.designer_0.9.13)
using PM: bpel_jboss_101200
More error infomation following:
Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
main:
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.collaxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.collaxa.cube.engine.types.bpel.CXPartnerLink.
[bpelc] __pl.setPartneLinkBinding(getProcessDescriptor().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
[bpelc] __setOutgoingLinks(__sc, __ctx);
[bpelc] ^
[bpelc] 4 errors
BUILD FAILED
E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml:28: ORABPEL-01005
Error in java files auto-generated when compiling ,why?
Thanks!

when compiled again without any change, the same errors like above are not occurs
more info.
Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
main:
BUILD SUCCESSFUL
Total time: 9 seconds
BUT, some errors occurs in BPEL PM server and in Console the process is not available
more Info: Because I using Chinese version,some chinese Info occurs in the error infomation ,so i have translated some character into English.
process "AboutTest" (version "1.0") compiled sucessfully
15:49:15,718 INFO [STDOUT] <2007-05-11 15:49:15,718> <INFO> <default.collaxa.cu
be.engine.deployment> process "AboutTest" (version "1.0") loaded sucessfully.
16:25:25,265 INFO [STDOUT] <2007-05-11 16:25:25,250> <INFO> <default.collaxa.cu
be.compiler> validating "E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0.jar\
AboutTest.bpel" ...
16:25:35,015 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
16:25:35,015 INFO [STDOUT] retun true;
16:25:35,015 INFO [STDOUT] ^
16:25:35,031 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
16:25:35,031 INFO [STDOUT] retun true;
16:25:35,031 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.col
laxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.colla
xa.cube.engine.types.bpel.CXPartnerLink.
16:25:35,859 INFO [STDOUT] __pl.setPartneLinkBinding(getProcessDescript
or().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
16:25:35,859 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
16:25:35,859 INFO [STDOUT] __setOutgoingLinks(__sc, __ctx);
16:25:35,859 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] 4 errors
16:25:36,343 INFO [STDOUT] <2007-05-11 16:25:36,312> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessFactory::generateProcessClass>
process "AboutTest" (version "1.0") compiled failed.
16:25:36,359 INFO [STDOUT] <2007-05-11 16:25:36,359> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessLoader::create> can not compile the class .
can not compile the bpel class generated from "AboutTest".
16:25:36,375 INFO [STDOUT] <2007-05-11 16:25:36,375> <ERROR> <default.collaxa.c
ube.engine.deployment> process "AboutTest" (version "1.0") loaded failed!!
16:25:37,281 INFO [STDOUT] <2007-05-11 16:25:37,265> <ERROR> <default.collaxa.c
ube> <BaseCubeSessionBean::logError>
if you have installed patched in server, please check whether the proriety "bpelcClasspath" contained the patch class.
16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.bind(CubeProcessHolder.java:1257)
16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.loadAndBind(CubeProcessHolder.java:870)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.loadArchive(CubeProcessHolder.java:812)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.CubeEngine.loadProces
sArchive(CubeEngine.java:985)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.ejb.impl.BPELDomainManagerBe
an.loadProcessArchive(BPELDomainManagerBean.java:390)
16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke0(
Native Method)
16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke(N
ativeMethodAccessorImpl.java:39)
16:25:37,421 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
16:25:37,421 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
24)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer$Conta
inerInterceptor.invoke(StatelessSessionContainer.java:683)
16:25:37,421 INFO [STDOUT] at org.jboss.resource.connectionmanager.CachedCo
nnectionInterceptor.invoke(CachedConnectionInterceptor.java:186)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.StatelessSessionInstanc
eInterceptor.invoke(StatelessSessionInstanceInterceptor.java:72)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.AbstractTxInterceptor.i
nvokeNext(AbstractTxInterceptor.java:84)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.runWit
hTransactions(TxInterceptorCMT.java:282)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.invoke
(TxInterceptorCMT.java:148)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.SecurityInterceptor.inv
oke(SecurityInterceptor.java:111)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.LogInterceptor.invoke(L
ogInterceptor.java:191)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.ProxyFactoryFinderInter
ceptor.invoke(ProxyFactoryFinderInterceptor.java:122)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer.inter
nalInvoke(StatelessSessionContainer.java:331)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.Container.invoke(Container.java
:709)
16:25:37,437 INFO [STDOUT] at sun.reflect.GeneratedMethodAccessor81.invoke(
Unknown Source)
16:25:37,437 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
16:25:37,437 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
24)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.ReflectedDispatcher.dispa
tch(ReflectedDispatcher.java:60)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
ation.java:62)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
ation.java:54)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.invoke(Invocat
ion.java:82)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.AbstractMBeanInvoker.invo
ke(AbstractMBeanInvoker.java:197)
16:25:37,453 INFO [STDOUT] at org.jboss.mx.server.MBeanServerImpl.invoke(MB
eanServerImpl.java:473)
16:25:37,453 INFO [STDOUT] at org.jboss.invocation.local.LocalInvoker.invok
e(LocalInvoker.java:97)
16:25:37,453 INFO [STDOUT] at org.jboss.invocation.InvokerInterceptor.invok
e(InvokerInterceptor.java:90)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.TransactionInterceptor.invoke
(TransactionInterceptor.java:46)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.SecurityInterceptor.invoke(Se
curityInterceptor.java:55)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ejb.StatelessSessionIntercept
or.invoke(StatelessSessionInterceptor.java:100)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ClientContainer.invoke(Client
Container.java:85)
16:25:37,453 INFO [STDOUT] at $Proxy146.loadProcessArchive(Unknown Source)
16:25:37,453 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sMonitorWork.run(CubeProcessMonitorWork.java:129)
16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.jca.work.WorkerJob.go(W
orkerJob.java:51)
16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.common.ThreadPool.run(T
hreadPool.java:267)
16:25:37,453 INFO [STDOUT] at java.lang.Thread.run(Thread.java:534)
16:25:37,453 INFO [STDOUT] <2007-05-11 16:25:37,453> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessMonitorWork::run> Error while loading process
archive E:\OraBPELPM\domains\default\deploy\bpel_AboutTest_1.0.jar
why?
thanks

Error when compiling the upload program (Message no. RSAR233)

Hello,
I tried to upload data from a flatfile but I did modified the Comm.Structure, Trans.Structure and Transfer Rules.
After <u><b>activating</b></u> the all changes, I check data from InfoPackage by previewing it. Unfortunately, I got the follow messages from the popup window:
Error 8 when compiling the upload program: row
227, message: Data type /BIC/CCABTWJI_STK01 was
found in a newer
I got this kind of problems many times. I solved it by create a new infosource and everything again. I don't think it's good idea to do this way.
Any better solution would be sincerely appreciated?
-WJ-

Another solution:
go out the transaction RSA1 ans return to the transaction RSA1 again.
This would help for me without restarting anything.
Thank you very much for all suggestion.
-WJ-

Error 8 when compiling the upload program: row

Error 8 when compiling the upload program: row
248, message: Data type /BIC/CCAWSAI_CID_TEXT was
found in a new
kindly help me out pls

Hi Raghu,
Error 8 Implies
The last words should be read as "was found in a newer version".
The system says that the active version of your Infosource is older then another version.
I'd recommend to delete Infosource - Source system assignment (with PSA tables etc.).
Then save (activate) the Infosource (communication structure). Then assign source system, create infopackage and load data again.
else..
Goto se38 and Run the program RS_TRANSTRU_ACTIVATE_ALL and relogin..
Plz look the link.
[Error when compiling the upload program (Message no. RSAR233) ]
Hope this helps...
Regards,
NR
Assign points if helpful...

Error 8 when compiling the upload program

When loading data to the Infocube it gives the following error
"Error 8 when compiling the upload
227, message: Data type /BIC/CCFBZ
found in a ne "
It doesnot go any further from thr infopackage also..

Error when compiling the upload program (Message no. RSAR233)

Idvd5.01 Errors were found during the burning process (Burned Finished)

I've never had this problem before, but i'm trying to burn a dvd after all the media and dvd are ready for burning and when I click on the burn icon the following message pops up: Errors were found during the burning process. I've check to make sure nothing is hanging outside the title safe area. Any suggestion to why I'm getting this error.

Hello, Oscar,
This message can mean several things.
First, are you burning an iMovie or a slideshow or both?
Do you have chapter markers in your movie? Are they on or withing 2 seconds of any transition or at the beginning of your movie?
Does everything encode properly?
Are you able to 'save as disk image'?
Post back with some more details about your project.

"Developer Error. The following errors were found in your file:

I reinstalled my OS and I am trying to install ?LabVIEW properly for the past two days and whenever I run the setup I am getting this error
""Developer Error. The following errors were found in your file:
1. Specified file not found: [Utilities] UpgradeManagerPostProcessor = Bin\niPie.exe
Correct the ini file and try again.""
Mathan Suggested me this thread .
In that thread Brain.T had given a zip file i put it in my bin folder and I am now able to install LabVIEW.But I am not able to install device drivers,vision,vision assistant.Help Please

So you are intentionally creating duplicate posts. You know as well as I do the difficulty in following threads when people post in several different places the same question, and not knowing which one to follow and respond to. In your case you posted the same question in 3 places.

CS4: "Critical errors were found in setup. Please see the setup log for details" !!

I am using Win XP Pro SP3. I have CS3 installed, and successfully installed Dreamweaver, Fireworks and Flash from CS4 Design Premium. Then I successfully uninstalled DW, FW and FL CS3.
When I tried to open a SWF in Illustrator it failed to open, and then I tried to create a really simple SWF (a rectangle) by exporting from Illustrator and tried to open that and it also failed. Whenever I tried to open or place ANY SWF into Illustrator I get a "file *** is in an unknown format and cannot be opened" error.
I decided there must be a corrupt file, maybe the upgrade must have affected some Illustrator files, so I tried to repair the CS3 installation. After over 2 hours of INTENSE FRUSTRATION having to constantly switch CS3 and CS4 disks many MANY times, the installation failed, listing "common files" that were missing from non-existent folders such as "C:\Documents and Settings\[username]\Desktop\Adobe CS4\Fireworks CS4\payloads\etc
When I tried to repair the CS4 installation after loading all the profile settings it errors before the installation window comes up, with "Critical errors were found in setup. Please see the setup log for details". Then it shuts down the installer. I then tried to do a system restore and system restore failed on all restore points!
Please help:
1. Where is "the setup log"?
2. Will creating and populating the folders mentioned in the failed CS3 installation from the CS4 disk allow it to work?
3. How can I uninstall CS4 if I can't even get to the installation window?
4. Has Adobe just DESTROYED MY REGISTRY BEYOND REPAIR!!!???

im haveing a huge irritation useing illustrator cs4 live paint bucket because i can use everything else apart from the paint bucket which should be the easyiest tool to use sometimes it works with the white arrow sometimes it doesnt i sometimes get this below message
the selection contains objects that cannot be converted. live paint groups can only contain paths and compound paths. clipping paths are not allowed
the lines which i have drawn are connected which i believe have to be in order to use the paint bucket and i have no clipping paths so i am am baffled
i presume it is because the line is set to 0.01 it seems the live paint bucket wont notice thin lines, but i tried makeing the line thicker so i could use the paint bucket and it still doesnt work.

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

It means that iDVD has found a problem with one of the movies added to the project. Did you edit the movie after it had been added to the project.
Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

ERROR: DW050: The following payload errors were found during install: ERROR: DW050: - Adobe Muse:

Having no luck installing anything. Even reinstalled Windows 7 Ultimate.
Starting out with Muse since it seems to be a small file size. No luck...anyone have any ideas?
This is what I get:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Muse: Install failed
-Jason

Sounds like it's a fairly common error across the suite - try this:
http://helpx.adobe.com/creative-suite/kb/installation-error-dw050-dw020-cs5.html

Excel extractor produces error "Error 8 when compiling the upload program"

I am trying to test a new Excel extractor I've created but when I do so I get the following error:
RSAR233
Error 8 when compiling the upload program: row 446, message: A newer version of data type /BIC/B0000788000 was
I've tried reactivating transfer structures and transfer rules but with no success. When I activate the transfer structures I can see in the status bar briefly a message refering "Activating Structure /BIC/B0000788000". I am assuming it's the technical name of the structure which supports the extraction.
Any ideas?
Thanks for the help.

OK, I can see your point. The Communication structure fields have data types, CHAR, CURR and DATS (those are the data types for the info-objects I am trying to load).
But if I try to assign the same data types to the objects of the transfer structure which match the flat file I get errors like "Invalid data type (DATS) for source systems of type Ext. System.". What I understand this means is that I cannot use data types other than CHAR in the flat file structure so how can I assign data from a CHAR flat file to a DATS destination object? Do I need some kind of conversion? How? Do I really need a routine in the transfer rules?

Error 8 when compiling the upload program: row 436

Hi all,
pls let me know how to solve this error
Error 8 when compiling the upload program: row 436, message: A newer version of data type /BIC/B0000582000 was
Thanks
Prashant

Hello SAP gurus.
I know it's a very long time the question was asked, but who cares if it can someday help somebody?
So i just faced the same issue, the solution was sample, i relaunch RSA1 and the problem was solved.
Hope i would be helpful
Salah

Errors were found when compiling the workflow

Similar Messages

Maybe you are looking for