Errors when saving contacts locally and syncing them between MacBook and iCloud

Last night I detected that the synchronisation of contacts between my MacBookPro (Yosemite, 13" Retina, late 2013) and iCloud is no longer working. Sync between iCloud and iOS devices (with iOS 8.1) works fine.
The problem effects the exchange of information from MBP to iCloud as well as the other way around. However, the issues are slightly different.
No matter what changes (changing existing contacts, creating new ones or creating/changing groups) I do directly in iCloud (which I usually don't do – I was just testing), none of them get synced to my MBP (though they do sync to all iOS devices).
If I do work on my MBP the situation is a bit different:
If I change any existing contact, those changes are not synced.
If I create a new contact in the "all contacts" group, it syncs to iCloud. If I make changes to that newly created contact, they are again not synced.
If I create a new contact in any other group, the contact does not sync.
If I create a new group, that group is displayed in iCloud as "new group", i.e. the name I gave it is lost on the way... If I add contacts to this group (again on the MPB), they do not sync.
If I create a new group using the option "create group from selected contacts" those contacts are synced to iCloud but the name of the group is again only "new group". Contacts added later to that group also don't sync.
Worst of all, everything that does not sync to iCloud, is lost once I close the Contacts app, meaning this information is not even stored on my MPB. OS X does not display any error messages. However, looking into the console, I found this message repeatedly whenever I was making changes to contacts etc (not only upon closing the app):
21.10.14 17:12:46,786 Contacts[532]: Error saving address book: Error Domain=NSCocoaErrorDomain Code=1560 "Bei der Überprüfung sind mehrere Fehler aufgetreten." [TRANSLATION: "Multiple errors occurred during verification"] UserInfo=0x600002e75500 {NSDetailedErrors=(
    "Error Domain=NSCocoaErrorDomain Code=1570 \"originalLine ist ein erforderlicher Wert.\" [TRANSLATION: "originalLine is a required value"] UserInfo=0x600003072180 {NSValidationErrorKey=originalLine, NSLocalizedDescription=originalLine ist ein erforderlicher Wert., [TRANSLATION: NSLocalizedDescription=originalLine is a required value.] NSValidationErrorObject=<NSManagedObject: 0x600000ab6ec0> (entity: ABCDUnknownProperty; id: 0x60000102b9e0 <x-coredata:///ABCDUnknownProperty/tFFBA3874-332E-45E1-AD9D-C743B61BD9148226> ; data: {\n    originalLine = nil;\n    owner = \"0x56b4002ab <x-coredata://606A6059-A9DE-42A2-91C2-BBCDADB20C77/ABCDContact/p5549>\";\n    propertyName = \"X-MS-OL-DESIGN\";\n})}",
    "Error Domain=NSCocoaErrorDomain Code=1570 \"originalLine ist ein erforderlicher Wert.\" [TRANSLATION: "originalLine is a required value"] UserInfo=0x600003462f40 {NSValidationErrorKey=originalLine, NSLocalizedDescription=originalLine ist ein erforderlicher Wert., [TRANSLATION: NSLocalizedDescription=originalLine is a required value.] NSValidationErrorObject=<NSManagedObject: 0x6000006bede0> (entity: ABCDUnknownProperty; id: 0x600000c3d300 <x-coredata:///ABCDUnknownProperty/tFFBA3874-332E-45E1-AD9D-C743B61BD9148152> ; data: {\n    originalLine = nil;\n    owner = \"0x56a0002ab <x-coredata://606A6059-A9DE-42A2-91C2-BBCDADB20C77/ABCDContact/p5544>\";\n    propertyName = \"X-MS-OL-DESIGN\";\n})}"
21.10.14 17:12:46,788 Contacts[532]: -[ABAddressBook save] failed. (<ABAddressBook: 0x6080020c4130>)
21.10.14 17:12:46,788 Contacts[532]: [CardDAVPlugin-ERROR] -doSyncWithServer: [syncAddressBook(<ABAddressBook: 0x6080020c4130>) save] FAILED
Does anyone have an idea how to fix this?
I am not sure about the relevance of these error messages but I found them as well in the console:
21.10.14 17:46:36,619 uxipm_ui[745]: WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.0 instead of 10.10.0. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
21.10.14 17:46:36,619 uxipm_ui[745]: 0   CarbonCore                          0x00007fff934f2dc3 ___Gestalt_SystemVersion_block_invoke + 113
21.10.14 17:46:36,620 uxipm_ui[745]: 1   libdispatch.dylib                   0x00007fff92302c13 _dispatch_client_callout + 8
21.10.14 17:46:36,620 uxipm_ui[745]: 2   libdispatch.dylib                   0x00007fff92302b26 dispatch_once_f + 117
21.10.14 17:46:36,620 uxipm_ui[745]: 3   CarbonCore                          0x00007fff9349b4da _Gestalt_SystemVersion + 987
21.10.14 17:46:36,620 uxipm_ui[745]: 4   CarbonCore                          0x00007fff9349b0c7 Gestalt + 144
21.10.14 17:46:36,620 uxipm_ui[745]: 5   QtCore                              0x000000010c089496 _ZN9QInternal16registerCallbackENS_8CallbackEPFbPPvE + 194
21.10.14 17:46:36,620 uxipm_ui[745]: 6   ???                                 0x00007fff64845ceb 0x0 + 140734879784171
And also this one:
21.10.14 17:46:35,098 CoreServicesUIAgent[322]: unexpected message <OS_xpc_error: <error: 0x7fff79579c60> { count = 1, contents =
  "XPCErrorDescription" => <string: 0x7fff79579f70> { length = 18, contents = "Connection invalid" }
}>
And this one:
21.10.14 17:42:42,115 com.apple.iCloudHelper[737]: objc[737]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
21.10.14 17:42:42,121 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
I have tried the troubleshooting listed here: Get help using iCloud Contacts (i.e. disabled and reenabled the sycn through iCloud in Preferences > iCloud and checked the login information etc)
And I also do not exceed any of the limits for contacts listed here: iCloud: Limits for Contacts, Calendars, Reminders, and Bookmarks
Any help is greatly appreciated!

I don't know if this is applicable for you, but this solved it for me.
My initial situation was the following, Ipad, Iphone and iMac where syncing well. But not my Macbook Pro. So I did this Get help using iCloud Contacts - Apple Support and this Sync Services: Advanced troubleshooting for contact and calendar syncing - Apple Support . As result all my contacts, even the view I had where gone on my macbook. I tried rebooting and restartting but nothing helped.
Then I did the following. I backuped all the cards from contacts on my imac (by moving them into a folder) and backuped them by export as archive.
Afterwards I disconnected from icloud on my imac, then reconected and deleted all contacts from the addressbook. I double checked if they where gone on icloud.com too. Afterwards I just moved them back from the folder to the address book. again double checked on icloud.com and the my macbook started syncing properly.
Which of the things I finally solved it, I don't know for sure. But I assume it was the one with deleting and restoring everything on another machine.

Similar Messages

  • HT1631 How  can I share and sync passwords between  iMac and iPad

    I'm in password ****!!!!  My memory is not what I once was and managing passwords on my iMac and iPad is making me crazy.  The iMac is the home planet at work for the iPad and it use it all day... the iPad is my device of choice when at home. 
    The value of a strong password cannot be understated in these times!!!!
    Is there an easy way to sync passwords between the two.  I find I spend way to much time  resetting passwords because I simply cannot remember them.
    Again... and again... and again... is the story of my life.
    Help
    mike

    The following may help:
    If you are using Safari on both devices and you have iOS 7.0.3 or later on the iPad and OS X Mavericks 10.9 or later on the Mac, iCloud Keychain may be what you want: iCloud: Frequently asked questions about iCloud Keychain
    There are other options available with 3rd party software. Two popular ones are https://lastpass.com and https://agilebits.com/onepassword

  • Sync email between macbook and iphone

    When I delete emails on my macbook and then sync my iphone, why do emails deleted on my macbook still appear on my iphone?

    Synching mail on a computer and an iPhone doesn't synch the actual mail, but rather the account settings.
    As to why you're deleting emails on your macbook and yet still seeing them on your phone is that you most likely have a POP account, and not an IMAP or Exchange.  This is a function of the type of mail account you have, not of the synching between the phone and computer.

  • TS1627 Sync iCal between MacBook and iPhone5

    I have searched for weeks/months to be able to find a fix for sync'ing iCal between MacBook (Snow Leopard OS) and iPhone 5
    There are many workarounds that looked way too complicated to install.
    This fix is simple and works - recommended to anyone

    Synching mail on a computer and an iPhone doesn't synch the actual mail, but rather the account settings.
    As to why you're deleting emails on your macbook and yet still seeing them on your phone is that you most likely have a POP account, and not an IMAP or Exchange.  This is a function of the type of mail account you have, not of the synching between the phone and computer.

  • How to sync Ibooks between Macbook and iPhone?

    Hi, doesn't anyone knwos how to sync my library between Iphone and Macbook?
    Thanks
    Carlo

    I created an empty collection in iBooks on my MacBook, then synced with my iPad, and nothing seemed to happen.  I did the Home button double-click on the iPad, killed iBooks, then went back to the MacBook and synced again.  The new collection then showed up on the iPad.  Might help.
    ...and from another thread: Select a book or collection in iBooks and press the Delete key to delete it. There will be a warning/Cancel/OK dialog.

  • I had my 4S activated at the store, but when I got home to sync up my phone and get all of my contacts, nothing is happening. I backed up my 3GS before switching phones, so it's all on my computer. Any ideas?

    I had my 4S activated at the store, but when I got home to sync up my phone and get all of my contacts, nothing is happening. I backed up my 3GS before switching phones, so it's all on my computer. Any ideas?

    Launch iTunes. From the menu bar click Store / View My Account
    Click: Edit Payment Information
    Make sure you have the correct Security Code.
    Then click: Done
    And try resetting your Apple ID password.  https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa

  • Font licensing error when Saving?

    I use Illustrator CC and get a licensing error when saving designs with downloaded fonts.
    The designs look fine on my computer and fine when I open them from my drop box account.
    The problem comes when others open the design, the fonts change to Arial in most cases, which is causing design issues.
    This is even happening when the design is saved as a PDF.
    How do I solve this problem?
    Can I get licenced fonts?
    Where are they available?
    Many thanks for reading.

    You can have your other contacts download and install the same fonts
    or
    you can select all the text in your document and create outlines of the fonts, printers often ask for this option.
    or
    You can purcahse fonts from say Adobe and if I am not mistaken you can have those installed on five work stations, I do not know if you are allowed to consider a colleague as legal user of the fonts. And I do no recall if the number of seats for the fonts have changed but it used to be five seats. As I recall.
    or
    you can purcahse from My Fonts as well http://www.myfonts.com but again the other contacts ave to have the fonts installed as well check out how many seats for the fonts ypoouare entitled to and if that includes remoe sites for the seats.

  • Dozens of open tabs lost! Synced them, reinstalled Windows and Firefox, set up Sync, looked up "tabs on other devices" in history - Only a third or so listed.

    Dozens of open tabs lost! Synced them, reinstalled Windows and Firefox, set up Sync, looked up "tabs on other devices" in history -> Only a third or so listed.
    Usually, when I reinstall Windows, I manually backup my Firefox bookmarks and open tabs, but because Sync has worked perfectly for me in the past, I didn't do it this time. I backed up all my other files and settings and whatnot from the rest of my system, then in Firefox I hit the Sync button (put in on the GUI so I see if it's syncing or done) for the last time, waited until the green rotating dot was gone, closed Firefox, shut down the system, formatted the drive and reinstalled Windows and Firefox. After setting up Sync I waited a while to make sure everything is on my system.
    Then I wanted to have all the tabs and windows open as I had on the old system, so I went to the history and "tabs on other devices". I could already see from the small size of the list, that tabs were missing. I went through all of them, opened them and sorted them into windows.
    -> Maybe about two thirds of the tabs I had open on my old system are gone!
    Not just new tabs that might not have been synced (although the button showed sync was complete), but also old tabs (from weeks ago) that must have been synced before. Actually maybe especially or even only the old ones are lost. And the lost tabs are not just from one of the open windows, but from several.
    What can I do to recover my lost tabs?
    They contain important websites that I didn't bookmark yet, articles that I wanted to read, windows with dozens of tabs on a topic that I did some research for and stuff like that.
    What does the green circle mean? Does it indicate that the sync is complete (to the Firefox servers) or just that the changes have been saved locally and set up for some next scheduled sync with the Firefox servers?
    Further info:
    I always run the newest stable release of Firefox (v19 on both systems). Old system was Windows 8 Enterprise Evaluation, new system is Windows 8 Pro. My used Sync quota is about 10 MB. I had 4 Firefox windows open with different amount of tabs in each of them, from 10 to maybe 80 with an overall amount of 150-200. Most of them weren't loaded. Firefox start is set to "load last session" and tabs are set to "load when selected". Memory usage 500 MB - 1 GB.

    I have most of the items bookmarked. Having 200 - 300 tabs open saves time, since I don't have to go to the bookmarks, if the tabs are already open. One problem has been crashes, but as long as I can restore a previous session, I can still get to the data. I had quite a few tabs open when I was planning to purchase a new computer. I also follow the stock market, and the weather. I was also looking at various VIrtual Private Networking (VPN) sites. At one time, I probably had 20 - 50 tabs open, just for those. I did bookmark a few, but unfortunately lost the VPN tabs, when Firefox crashed. Even if I don`t go to a particular group of tabs very often, leaving it open is faster, especially since I will know where they are. I often put the computer in standby mode, rather than shutting it off, especially if I will remain in the same location.

  • My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can i fix this without turning off iCloud?

    My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can I fix this without turning off iCloud?
    I am at a new office that uses Outlook (not Outlook Exchange) which does not sync with my mobile... I just got iCloud set up on my PC to sync my contacts, calendar, reminders, etc... The sync worked (not without flaws, but the other issues seem solvable... I think), so that i can now see all my appointments on both my phone and on my PC. The problem I am having is that iCloud moved all of my calendar items from Outlook into iCloud calendar and now when I send out meeting/calendar invites the recipients may accept them, but the meeting does not get added to their calendar. This is a huge problem and may mean that i need to turn off iCloud.
    Does anyone know how to fix this?
    Thanks!

    I am replying to my own post here as I seem to have fixed the problem.
    I do have some calendars that are shared. Some of those are shared with users who have time zone support turned on. So i activated time zone support on my iphone, then deleted my icloud subscription. I then signed in to icloud again and voila... problem solved.
    It is a weird one as the other calendar views were always fine and when you opened an event that appeared in the wrong day (on list view), the correct date of the event was shown in the information...
    one more bug in a complicated system I guess

  • HUH? Error when saving

    We are getting a HUH? Error when saving certain files. Once this error shows up, it will save the document, but will a
    lways come up when you resave.  It only happens on some documents
    We are on a network and share files, but everyone is working in CS4

    I have been having this issue on one system. I get an "Unexpected Error cannot save file" when trying to save in any format.
    This happens when saving across the network or locally.
    (CS3 Vista)
    We have been living with this problem since the beginning.  We simply do not work on this computer in Illustrator for this reason.

  • I downloaded hundreds of CDs to iTunes on my old computer and synced them to both my iPad and classic ipod.  We purchased a MacBook air and I noticed the previously downloaded CDs were not in my library.  How can I find them?

    I Downloaded hundreds of CDs to iTunes on a previous laptop and synced them with my iPad and classic ipod.  We recently purchased a MacBook Air, and I started downloading more CDs to iTunes.  When I went to sync my iPod, it removed all my old music and only included the music that I had just downloaded.  When I went to my iTunes library, the old music was missing.  The old music is still showing up on my iPad.  How do I get it back into the library, or do I have to download everything again onto the MacBook air?

    rosefromlatrobe wrote:
    I Downloaded hundreds of CDs to iTunes on a previous laptop and synced them with my iPad and classic ipod.  We recently purchased a MacBook Air, and I started downloading more CDs to iTunes.
    When I went to my iTunes library, the old music was missing.
    You mean on the old computer, the music is missing?
    Or on the new computer the old music that you transferred from old computer, is now missing?
    Did you transfer the iTunes library from the old computer to the new computer?

  • Error 500 -Internal Server Error when I click on browse catelog button on Reports and Analytics in Fusion

    Hi
    I am unable to access Reports and Analytics . It throws a Error 500 -Internal Server Error when I click on browse catelog button on Reports and Analytics in Fusion
    I have all the required roles and also BIADMINISTRATOR ACCESS still I am unable to login to Reports and Analytics. I have cleared the cache also.
    My collegue who has the same roles is able to access it.
    Regards
    Avinash

    I created the showModule.xhtml in the web.view.module\src\main\resources folder and test the application and Now I'm getting the error in both deployment ways.
    a) Local deployment: Same result
    Error 500--Internal Server Error
    com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
    at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
    at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
    b) Remote server:
    Error 500--Internal Server Error
    com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
    at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
    at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
    Please check the below screenshots for the mappings captured in the properties window.
    http://imageshack.us/photo/my-images/5/srwebviewmodule.png/
    http://imageshack.us/photo/my-images/811/eclipseexplorer.png/
    http://imageshack.us/photo/my-images/521/cdiandrichfacesear.png/
    http://imageshack.us/photo/my-images/90/cdiandrichfaces.png/
    Thanks,
    Vijaya

  • Error when saving

    Hello BW Experts,
    I am getting this error while saving a query in Bex.
    'The query could not saved due to a problem in transport'.
    I am actually creating a test query production. I am not sure why it is refering to the transport. From what i understand there is nothing to deal with transports.
    Anyone experienced a similar problem before.
    Suggestions appreciated.
    Thanks,
    BWer

    OSS NOTE 194051
    Symptom
    An error occurs when you save a query:
    Error when saving
    "The query could not be saved due to a problem in transport".
    Other terms
    Business Explorer, query, transport, save, R9 124
    Reason and Prerequisites
    There are 4 possible reasons for this problem:
    1. The BEx default transport request or the development class-dependent transport request is not maintained or released in the Administrator Workbench.
    2. The system is set to "cannot be changed". Refer to Note 337950 (as of 2.0b SP 11), which describes how query objects can be edited in systems that cannot be changed.
    3. You are not authorized to write to Workbench requests.
    4. The BEx default transport request or the development-class-dependent transport request in the Administrator Workbench has another target system than the query (the transport destination of the query is determined via the transport layer of the query's development class (as of 3.0: of the package)).
    The error only occurs for query objects which already have a development class, that means, which were already placed on a transport request.
    Solution
    Solution for Cause 1:
    a) Start the Administrator Workbench
    b) Choose 'Goto' to change to Transport connection
    c) Choose "Request BEx" or "BEx development classes" in the toolbar.
    d) Create a (new) request.
    e) All changes in the BEx are now written to this request.The end user is no longer confused by 'Transport' dialog boxes.
    Solution for Cause 2:
    See Note 337950
    Solution for Cause 3:
    Authorize user to write to Workbench requests.
    Solution for Cause 4:
    Create a request for each target system. Assign the request suiting the target system of the transport layer of the development class (of the package) to each development class (as of 3.0: to each package) used for BEX objects.
    If this does not change the situation, further information is useful for error analysis.
    Go to Transaktion SE16, Table RSZCOMPDIR. In field COMPID, select the technical name of your query. Read the COMPUID of your query.
    Go to SE37, function module rso_elem_get_related. Parameter I_IOBJNM is set to the COMPUID, and parameter I_OBJVERS (object version) is set to A. Only the export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT are of interest.
    These entries are then entered in function module rs_tr_objects_check_insert in import parameter I_T_TR_OBJECT. In this parameter, fill field PGMID fixed with 'R3TR' and field OBJECT fixed with 'ELEM'. Field OBJ_NAME is filled with the contents of field OBJNM from export parameters E_T_OBJ_EXISTENTIAL and E_T_OBJ_DEPENDENT. The other fields are not relevant.
    The export parameters of this function module are required for further error determination. Add this information to your OSS message. The table of messages E_T_MSG is important in particular.

  • Permission error when saving as pdf

    I am using 10.6.7 on a Mini and I get a error when saving a documetn as a PDF.  It says I don't have permission to save the file.

    Hi Arnis,
    I have also posted this separately.
    Following is the ditamap i am using to create the PDF. This has booktitle, front matter, toc, chapter and backmatter. I am able to generate a PDF (complete with title page, toc, chapter, backmatter, index) using fop 0.25. However, when I try to create a pdf in FM 9.0, I get only the chapter. How can get the others through FM 9.0. Please provide a solution.
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE bookmap PUBLIC "-//OASIS//DTD DITA BookMap//EN" "bookmap.dtd" [
    <!-- Begin Document Specific Declarations -->
    <?Fm Validation Off?>
    <!-- End Document Specific Declarations -->
    ]>
    <?Fm Condition DITA-Topicref Blue NO_OVERRIDE show?>
    <?Fm Condition FM8_SYSTEM_HIDEELEMENT AsIs NO_OVERRIDE hide?>
    <?Fm Condition FM8_TRACK_CHANGES_ADDED Forest%20Green SINGLE_UNDERLINE show?>
    <?Fm Condition FM8_TRACK_CHANGES_DELETED Red STRIKETHROUGH show?>
    <?Fm BoolCondExpr "" State 0?>
    <?Fm TrackChange Off PreviewState PREVIEW_OFF_TRACK_CHANGE?>
    <bookmap
        xmlns:ditaarch = "http://dita.oasis-open.org/architecture/2005/">
    <booktitle><mainbooktitle>Management</mainbooktitle>
    <booktitlealt>Version 4.0</booktitlealt>
    <booktitlealt></booktitlealt></booktitle>
    <frontmatter><notices></notices>
    <booklists><toc navtitle = "Contents"/></booklists>
    <preface id = "preface">
    <topicref navtitle = "Preface" href = "nm\concepts\nm_Preface.xml"
        type = "concept"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></topicref></preface></frontmatter>
    <chapter navtitle = "Management" href = "nm.ditamap"
        format = "ditamap" id = "chapter"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></chapter>
    <backmatter><booklists><indexlist navtitle = "Index"/></booklists></backmatter></bookmap>

  • OS 10.6.8, Macbook Pro 3.1 error when saving monitor calibration, cannot save.

    Macbook pro 3.1 OS 10.6.8, error when saving monitor calibration profile.  Tried to name new profile, or save as an older profile, still got error when attempting to save.

    Try a NVRAM reset, and then go through the monitor calibration again.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the third time.
    Release the keys.

Maybe you are looking for

  • Did the regular 15" MBP receive the upgraded fans?

    OK, we all know that the regular 13" and 15" MBP's were upadted and are just as capable, acually other than the display they are more capable and more flexible machines than the Retina MBP.  The only thing that hasn't been talked about anywhere is th

  • What happened to the dock icon in safari 6.04

    The most recent Mountain Lion update included Safari 6.04. All of a sudden the dock icon looks as bad as google's chrome. When using the magnify option it pixelates all ugly. Did we finally sell out? Is this the way Tim is going to run things? Someon

  • How do I turn off 'additional plug-ins' pop-up reminder? I don't want them installed! Audio and video ads are annoying.

    How do I turn off 'additional plug-ins' pop-up reminder? When I'm surfing websites or Facebook, for example, I keep getting the little pop-up, that reduces my screen size, saying additional plug-ins are available to play all content. I don't want the

  • I randomly get this: name of your computer is already in use

    Does anyone know how to fix this? I have comcast that is IPv6 and probabnly IPv4 as well. I have the tower Airport Extreme, firmware updated MacPro, 10.9.2, Airport card turned off, using only ethernet. One Trendnet Gigabyte Green switch. I have been

  • Shutter Glitch

    apparently there is this camera glitch http://nexus404.com/Blog/2010/06/24/users-report-iphone-4-camera-problems-virtua l-shutter-wont-open-on-iphone-4-youre-not-the-only-one-as-users-report-camera-is sues/ which I seem to have inherited. Bought the