Errors when Starting Agents in PCo 15.0 SP3

We are in the process of upgrading to PCo 15.0 and are getting the following error when starting an agent.  We used the same configuration and setup using PCo 2.3 with no issue but we are having issues with PCo 15.0 SP3. This issue is happening on both DA and HDA agents.  Has anyone see this before:
1910     Manufacturing Fault: REASON = FileNotFoundException
Could not load file or assembly 'WebSocket, Version=15.0.3.2284, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.; SEVERITY = Fatal
STACK TRACE:
    at SAP.Manufacturing.Connectivity.Protocol.Custom.PCoQueryListener.Start()
   at SAP.Manufacturing.Connectivity.AgentBase.InitializeProtocol()
   at SAP.Manufacturing.Connectivity.AgentBase.Start()
Thanks,
George

HI George,
Re-apply the PCo Installer, expand the list of installation items, and scroll down to Additional Components to select Websockets, and deploy. That should correct your issue.
Regards, Steve
Message was edited by: Steve Stubbs

Similar Messages

  • Olympia error when starting Agent

    I am having this error when starting the agent on the new
    enterprise edition:
    lsnrctl dbsnmp_startLSNRCTL for Linux: Version 8.0.5.0.0 - Production on 13-MAR-99
    11:27:39
    (c) Copyright 1997 Oracle Corporation. All rights reserved.
    DBSNMP Discovery Error: couldn't read file
    "./oracle_olympia.tcl": no such file or directory
    The agent does start (as dbsnmp_status reports running). However,
    this error bothers me and I dont know what the impact is.
    Any idea?
    Thanks,
    Calixto.
    null

    S C Maturi (guest) wrote:
    : Calixto Melean (guest) wrote:
    : : I am having this error when starting the agent on the new
    : : enterprise edition:
    : : >lsnrctl dbsnmp_start
    : : LSNRCTL for Linux: Version 8.0.5.0.0 - Production on
    13-MAR-99
    : : 11:27:39
    : : (c) Copyright 1997 Oracle Corporation. All rights reserved.
    : : DBSNMP Discovery Error: couldn't read file
    : : "./oracle_olympia.tcl": no such file or directory
    : : The agent does start (as dbsnmp_status reports running).
    : However,
    : : this error bothers me and I dont know what the impact is.
    : : Any idea?
    : : Thanks,
    : : Calixto.
    : Calixto,
    : This file got into the distribution by mistake, ignore the
    : message.
    : Maturi
    I am getting the same olympia error message but my agent does not
    get started either. I am using Redhat 5.2 and 8.0.5.1EE of Oracle
    on Linux. Anything that I might be missing? Thanks ..
    Shub
    null

  • Multiple condition : Error when starting a SWITCH branch

    Hi,
    In our Z Leave Workflow,I am facing the errors listed below.
    Error when starting a SWITCH branch
    Error during CASE evaluation in SWITCH mode for node 0000000158
    Operator 'EQ': The value of the left operand cannot be determined
    Error in the evaluation of expression '<???>&REQ.STATUS&' for item '1'
    Unable to determine the value of component ''
    It gives error in Multiple condition Request Approved? which is similar to standard WF12300111 node number 158 (u can say copy of WF12300111
    This multiple condition works in some scenario But it gives dump at other scenario .
    I have checked the value of REQ.STATUS in runtime. It populates the value as 'POSTED' in runtime,
    Please suggest if any solution on this.
    Regards,
    Kalpesh

    Hi There was some problem with task which was comprising class CL_PT_REQ_WF_ATTRIBS and APPROVE method. This method is to change the status of particular leave workitem.After running this particular task ,the status was not changin instantly.This method locks particular workitem and was releasing the workitem once the WF gets completed.Hence I was getting REQ.STATUS as sent.
    I have changed that task with following code in new task...
    DATA:
          REQUEST_ID TYPE PTARQ_DEDUCTION-REQUEST_ID,
    request      TYPE REF TO if_pt_req_request,
        new_status   TYPE tim_req_status.
      SWC_GET_ELEMENT CONTAINER 'REQUEST_ID' REQUEST_ID.
    CALL FUNCTION 'ENQUEUE_EPTREQ'
        EXPORTING
          mode_ptreq_header = 'E'
          request_id        = request_id
        EXCEPTIONS
          foreign_lock      = 1
          system_failure    = 2
          OTHERS            = 3.
      IF sy-subrc <> 0.
        MESSAGE w058(hrtim_abs_req) WITH request_id.
      ELSE.
    CALL METHOD ca_pt_req_header=>agent->get_request
          EXPORTING
            im_request_id = request_id
          IMPORTING
            ex_request    = request.
    execute state transition
        CALL METHOD request->initiate_state_transition
          EXPORTING
            im_transfer_event = 'APPROVE'
          IMPORTING
            ex_new_status     = new_status.
    COMMIT WORK.
        CALL FUNCTION 'DEQUEUE_EPTREQ'
          EXPORTING
            request_id = request_id.
    ENDIF.
    This will create new status for leave item during WF processing.
    Apart from that also added Wait for  2 minutes after that task....
    Thanks for your help.
    Regards,
    Kalpesh

  • Error when starting work item

    Hi
    We are having SRM5.0.
    Trying to create Contract. Workflow Without approval of contract(WS1400086)is activated and start conditions also no workflow activated.
    Contract is created and getting message Contract created.
    But when tried to release the contract it shows "Awaiting approval".
    In Workflow log (SWI1)it shows error."Error when starting work item xxxx".
    What could be the reason. Please let me know the solution if anyone of you come across such error.
    Thanks in advance
    Jagadish

    Masa
    It is maintained as General task already.
    It seems the workflow task WS14000085 does not have definition.
    When checked in SWDD for the above teask there are no steps defined for that workflow.
    SAP says that we need to define and action for workflow WS14000085.
    But what is the procedure to define the workflow.
    I presume this is the standard workflow and it should be defined by default when it comes along with the SRM package.
    Anyone of you know how to define the workflow and activate the same?
    Regards
    Jagadish

  • Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'

    Hello experts.
    When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
    Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
    We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
    This is what we've tried so far:
    replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64)  with the new version mentioned in Note 413708.
    tested the connection in SM59 - non successful
    tested the report query with transaction MDXTEST - non successful
    tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
    We have the following config:
    MS server 2003 SP2 x64 ed.
    SAP logon 7.20
    MS SQL server 2005
    CR 2008
    new librfc32.dll version 7200.1.39.6461
    Any ideas on what to try next would be highly appreciated!
    Cheers, IngA

    Hi Ingo.
    We have only one application server.
    I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
    Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
    --IngA
    Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM

  • Error when starting a SWITCH branch (8987)

    Hi,
    I am testing my workflow which starting with a multiple condition (switch). The workflow process is stopped with the error:
    Error when starting a SWITCH branch (8987).
    The workflow check shows no warnings or errors. What could be the problem?
    Thank you in advance.
    /Elvez

    Check the workflow container (of the started workflow instance) and see if you spot a problem with one of the container objects used in your switch conditions.

  • Error when starting Mercury Quicke Test Professional

    Hello,
    I am executing the QTP scripts through eCATT. During execution I got an error ' Error when starting Mercury Quick Test Professional'.
    Does anybody knows how to resove this?
    Thanks,
    Mahantesh

    Hi,
    This is a common problem if scripting is disabled either on server or on ur sapgui client.
    for enabling at server got rz11 tcode and enter sapgui/user_scripting profile and enable scripting there.
    Refer my sdn weblogs which shows minimum config for QTP and ECATT  and also how to create and run the scripts.
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    /people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2
    Please reward points.

  • Error when starting configtool.

    The installation is successful. But I am getting the following error when starting configtool:
    PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    com.sap.engine.frame.core.configuration.ConfigurationException: Error while conn
    ecting to DB.
    This is not during the installation as given in some of the other posts. The installation is successful and I am able to start and run the J2EE engine and the Portal. This error occurs when I try to start the config tool.
    Any help would be appreciated. Thanks.

    Hi Arul,
    Have you checked the parameters that the configtool is using to connect? (don't use default settings)
    What database is this on? In the case that it is oracle can you TNS ping the db? The listener is running?
    Regards
    Daniel

  • Error when Starting WAD in New System

    Hi
    We are getting the following error when starting the Web Application Designer.
    "Component 'BexWEbApplicationDesigner': available version 64 , Version 154 required bfore you can continue you have to run the front end "
    I understand that we are missing some fornt end patch.Where can i get this patch.
    Can i get this patch or version in SAPservice market place.
    Please help me
    How to correct this error.Any thoughts are welcome...
    Regards
    Pravallika
    Message was edited by:
            Pravallika Thammineni

    Hi Pravallika,
    Do you already have an answer to this problem. I am experiencing the same problem at the moment...
    Best Regards
    Marcel

  • Error when starting Java(TM) ME Platform SDK 3.0

    hey guys, I get this error when starting Java(TM) ME Platform SDK 3.0. When I installed it it installed 'successfully' and then I double clicked the file on the desktop (I'm using Windows Vista 32bit Home premium) and it gave me the following error when saying 'Starting Modules':-------------------------------------------------------------------------------
    Log Session: Sunday, February 13, 2011 1:52:25 PM GMT
    System Info:   Product Version         = Java(TM) ME Platform SDK 3.0
      Operating System        = Windows Vista version 6.0 running on x86
      Java; VM; Vendor        = 1.6.0_23; Java HotSpot(TM) Client VM 19.0-b09; Sun Microsystems Inc.
      Runtime                 = Java(TM) SE Runtime Environment 1.6.0_23-b05
      Java Home               = C:\Program Files\Java\jdk1.6.0_23\jre
      System Locale; Encoding = en_GB (cdctoolbar); Cp1252
      Home Directory          = C:\Users\Molten Ice
      Current Directory       = C:\Program Files\Java\Java_ME_platform_SDK_3.0\bin
      User Directory          = C:\Users\Molten Ice\javame-sdk\toolbar\3.0
      Installation            = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1
                                C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\ide10
                                C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\java2
                                C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\mobility8
                                C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\profiler2
                                C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9
      Boot & Ext. Classpath   = C:\Program Files\Java\jdk1.6.0_23\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\modules\jdk.boot.jar;C:\Program Files\Java\jdk1.6.0_23\jre\classes;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\dnsns.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\localedata.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunjce_provider.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunmscapi.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunpkcs11.jar
      Application Classpath   = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\boot.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-modules.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-util.jar;C:\Program Files\Java\jdk1.6.0_23\lib\dt.jar;C:\Program Files\Java\jdk1.6.0_23\lib\tools.jar
      Startup Classpath       = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\core.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\org-openide-filesystems.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1\core\locale\core_cdctoolbar.jar
    WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-javame-common.jar!/org/netbeans/modules/javame/common/resources/layer.xml
    WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-e2e.jar!/org/netbeans/modules/e2e/layer.xml
    WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
    WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
    [      0]   INFO - ootstrap.PropertyEditorManager - Registering custom property editors
    [    117]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
    [    217]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
    [    317]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
    [    417]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
    [    523]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
    [    627]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
    [    732]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
    [    832]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
    [    932]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
    [   1032]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [   2166]   WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [   2268]   INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
    [   3384]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [   5476]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [   7576]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [   9677]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  11777]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  13877]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  15977]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  18077]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  20177]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  22277]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  23379]  ERROR - un.jme.toolkit.bootstrap.Batch - Problem calling start() on DeviceManagerConnection
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
         at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
         at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
         at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
         at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
         at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
         at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
         at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
         at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
         at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
         at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
         at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
         at org.netbeans.core.startup.Main.start(Main.java:312)
         at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: java.io.IOException: Failed to retrieve RMIServer stub: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect]
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
         at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
         ... 24 more
    Caused by: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect]
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
         at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
         at javax.naming.InitialContext.lookup(InitialContext.java:392)
         at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
         at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
         ... 27 more
    Caused by: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
         at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
         at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
         at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
         at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
         ... 32 more
    Caused by: java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:529)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.<init>(Socket.java:375)
         at java.net.Socket.<init>(Socket.java:189)
         at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
         at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
         ... 37 more
    SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
    java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:529)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.<init>(Socket.java:375)
         at java.net.Socket.<init>(Socket.java:189)
         at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
         at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
    Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
         at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
         at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
         at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
         at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
    Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect]
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
         at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
         at javax.naming.InitialContext.lookup(InitialContext.java:392)
         at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
         at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
    Caused: java.io.IOException: Failed to retrieve RMIServer stub
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
         at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
    Caused: java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
         at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
         at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
         at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
         at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
    [catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
         at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
         at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
         at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
         at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
         at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
         at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
         at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
         at org.netbeans.core.startup.Main.start(Main.java:312)
         at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
         at java.lang.Thread.run(Thread.java:662)
    [  23598]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
    [  23698]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
    [  23798]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
    [  23898]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
    [  23998]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
    [  24098]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
    [  24198]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
    [  24298]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
    [  24398]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
    [  24498]   INFO - un.jme.toolkit.bootstrap.Batch - Objects started
    [  24600]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
    [  24700]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
    [  24800]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
    [  24900]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
    [  25000]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
    [  25100]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
    [  25202]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
    [  25302]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
    [  25402]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
    [  25502]   INFO - un.jme.toolkit.bootstrap.Batch - Objects started
    [  25602]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  26699]   WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  26799]   INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
    [  27914]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  30005]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  32106]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  34206]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  36306]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  38406]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  40506]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  42607]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  44706]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    [  46806]   INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
    SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
    java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:529)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.<init>(Socket.java:375)
         at java.net.Socket.<init>(Socket.java:189)
         at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
         at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
    Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect
         at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
         at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
         at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
         at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
         at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
    Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
         java.net.ConnectException: Connection refused: connect]
         at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
         at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
         at javax.naming.InitialContext.lookup(InitialContext.java:392)
         at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
         at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
    Caused: java.io.IOException: Failed to retrieve RMIServer stub
         at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
         at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
         at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
    [catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:53)
         at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:86)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
         at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
         at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
         at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
         at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
         at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
         at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
         at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
         at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
         at org.netbeans.core.startup.Main.start(Main.java:312)
         at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
         at java.lang.Thread.run(Thread.java:662)
    [  48018]   INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
    [  48118]   INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
    [  48218]   INFO - bootstrap.ObjectGraphProcessor - Calculating order...
    [  48318]   INFO - bootstrap.ObjectGraphProcessor - Calculated order
    [  48418]   INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
    [  48518]   INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
    [  48618]   INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
    [  48718]   INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
    [  48818]   INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
    [  48918]   INFO - un.jme.toolkit.bootstrap.Batch - Objects started
    [  49018]   INFO - bootstrap.ObjectGraphPI did install Nokia's SDK with NetBeans and this works perfectly.
    I went through with everything recommended here: http://blogs.sun.com/javamesdk/entry/first_aid_when_emulator_doesn
    But nothing worked.
    Any help appreciated!
    Thanks.

    Note: This thread was originally posted in the [Sun Java Wireless Toolkit|http://forums.sun.com/forum.jspa?forumID=82] forum, but moved to this forum for closer topic alignment.

  • Error when starting weblogic server 10.3.6

    hi am having below error when starting my weblogic server am in window xp
    C:\mydomain\base_domain\bin>DIR
    Volume in drive C is WinXP
    Volume Serial Number is F086-F167
    Directory of C:\mydomain\base_domain\bin
    22/04/2011  11:10 PM    <DIR>          .
    22/04/2011  11:10 PM    <DIR>          ..
    22/04/2011  11:10 PM    <DIR>          nodemanager
    22/04/2011  11:10 PM    <DIR>          server_migration
    22/04/2011  11:10 PM    <DIR>          service_migration
    29/11/2011  10:14 PM            14,273 setDomainEnv.cmd
    29/11/2011  10:14 PM            16,221 setDomainEnv.sh
    29/11/2011  10:14 PM             3,322 startManagedWebLogic.cmd
    29/11/2011  10:14 PM             3,147 startManagedWebLogic.sh
    29/11/2011  10:14 PM             5,914 startWebLogic.cmd
    29/11/2011  10:14 PM             5,657 startWebLogic.sh
    29/11/2011  10:14 PM             2,528 stopManagedWebLogic.cmd
    29/11/2011  10:14 PM             2,391 stopManagedWebLogic.sh
    29/11/2011  10:14 PM             2,103 stopWebLogic.cmd
    29/11/2011  10:14 PM             2,081 stopWebLogic.sh
                  10 File(s)         57,637 bytes
                   5 Dir(s)   6,815,825,920 bytes free
    C:\mydomain\base_domain\bin>START startWebLogic.cmd
    C:\mydomain\base_domain\bin>
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
    128m  -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C
    :\PROGRA~1\Java\JDK16~1.0_2\lib\tools.jar;C:\wlserver\server\lib\weblogic_sp.jar
    ;C:\wlserver\server\lib\weblogic.jar;C:\modules\features\weblogic.server.modules
    _10.3.4.0.jar;C:\wlserver\server\lib\webservices.jar;C:\modules\org.apache.ant_1
    .7.1/lib/ant-all.jar;C:\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.
    jar;C:\oracle\Middleware\wlserver_10.3\sip\server\lib\weblogic_sip.jar;C:\Oracle
    \MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\wlserver\common\derby\li
    b\derbyclient.jar;C:\wlserver\server\lib\xqrl.jar
    PATH=;C:\wlserver\server\native\win\32;C:\wlserver\server\bin;C:\modules\org.apa
    che.ant_1.7.1\bin;C:\PROGRA~1\Java\JDK16~1.0_2\jre\bin;C:\PROGRA~1\Java\JDK16~1.
    0_2\bin;C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bi
    n;C:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PH
    P;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Commo
    n Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLSha
    red;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Co
    mmon Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Co
    mmon Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Share
    d\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C
    :\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program File
    s\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\
    jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\
    DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\
    forms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21;C:\wlserver\server\nati
    ve\win\32\oci920_8
    *  To start WebLogic Server, use a username and   *
    *  password assigned to an admin-level user.  For *
    *  server administration, use the WebLogic Server *
    *  console at http:\\hostname:port\console        *
    starting weblogic with Java version:
    java version "1.6.0_21"
    Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
    Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
    Starting WLS with line:
    C:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client   -Xms256m -Xmx512m -XX:CompileThr
    eshold=8000 -XX:PermSize=128m  -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer
    -Djava.security.policy=C:\wlserver\server\lib\weblogic.policy  -Xverify:none -ea
    :com.bea.wcp...   -da -Dplatform.home=C:\wlserver -Dwls.home=C:\wlserver\server
    -Dweblogic.home=C:\wlserver\server  -Dcommon.components.home=C:\Oracle\MIDDLE~1\
    ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.common
    s.logging.impl.Jdk14Logger -Ddomain.home=C:\mydomain\BASE_D~1 -Djrockit.optfile=
    C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Dorac
    le.server.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1\servers\AdminServer -D
    oracle.domain.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1  -Digf.arisidbeans
    .carmlloc=C:\mydomain\BASE_D~1\config\FMWCON~1\carml  -Digf.arisidstack.home=C:\
    mydomain\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:
    \mydomain\BASE_D~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\
    mydomain\BASE_D~1\servers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\-
    -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.os
    soiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djav
    a.protocol.handler.pkgs=oracle.mds.net.protocol  -Dweblogic.jdbc.remoteEnabled=f
    alse  -Dweblogic.management.discover=true  -Dwlw.iterativeDev= -Dwlw.testConsole
    = -Dwlw.logErrorsToConsole=  weblogic.Server
    Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
    Caused by: java.lang.ClassNotFoundException: weblogic.Server
            at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
            at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
    Could not find the main class: weblogic.Server.  Program will exit.
    my set is
    C:\mydomain\base_domain\bin>SET
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\Desmond\Application Data
    CLIENTNAME=Console
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=MADIMAD-B533821
    ComSpec=C:\WINDOWS\system32\cmd.exe
    FORMS90_PATH=C:\forms
    FP_NO_HOST_CHECK=NO
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\Desmond
    LOGONSERVER=\\MADIMAD-B533821
    NUMBER_OF_PROCESSORS=2
    ORACLE_HOME=C:\product\11.2.0\dbhome_1
    OS=Windows_NT
    Path=C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bin;C
    :\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PHP;C
    :\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common F
    iles\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared
    ;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Commo
    n Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Commo
    n Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Shared\D
    LLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C:\m
    ydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program Files\J
    ava\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\jdk
    1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\Dev
    SuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\for
    ms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PHPRC=C:\Program Files\PHP\
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=170a
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    SESSIONNAME=Console
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
    TMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
    USERDOMAIN=MADIMAD-B533821
    USERNAME=Desmond
    USERPROFILE=C:\Documents and Settings\Desmond
    windir=C:\WINDOWS
    aa__COMPAT_LAYER=EnableNXShowUI

    Tshifhiwa,
    Back again? Nothing learned?
    No jdev version?
    You should n^know by now that you have to give at least some basic information.
    A description of what you tried to do outside the listing would help too.
    Timo

  • Error when starting submethod -

    Dear Experts,
    we are using standard work flow for Appropriation Request(AR)  approving.
    Approvers are geting mail to SAP inbox.
    when double click on inbox->worlflow item for that particular AR, it goest AR display screen & when we click on balk(F3) goes to screen where we can click on "approve" , " Reject" buttons.
    now issue is once double click on inbox item gives infor message saying "Error when starting submethod"(Message no. SWF_RUN637) & goes to approval screen directly.
    Please help to correct this issue.
    Thanks & kind Regards,
    SL

    Hi,
    The issue might be with the secondary methods of the decision  step. Check if any secondary methods are included in the decision step. and make sure when you are using the secondary methods you should ahve the instance of the business object.. in the workflow container so that the methods that you want to execute parallel while or before executing the workitem.
    The secondary methods will be listed out under METHODS tab of decision step
    Regards
    Pavan

  • Windows error when starting iTunes 5.

    Hey.
    My iTunes suddenly started giving me a Windows error when starting it. I installed iTunes 5 instead of iTunes 4 recently, and it has been running. But today when I wanted to transfer some more music to my iPod iTunes wouldn't start. I just get the Windows Error... thing. What can I do? I already tried to reinstall it, but as you know, it's god d*mn impossible to completely delete Apple software without a format.
    I talked to a friend of mine who had experienced the same problem, but it was his firewall/antivirus (F-Secure) that was the problem, and I'm running PC-Cillin - which I tried to disable, but it didn't help.
    Help, thank you.

    Deffo a missing quicktime issue. See my post Chris Rocco, "itunes launching problem.", 07:20am Oct 2, 2005 CDT
    Itunes relies for some unknown reason on compression technologies in quicktime libraries. Crazy! No more quicktime alternative!

  • MissingResourceException Error when Starting Application

    I am getting the following error when starting an Enterprise application in weblogic 10.3.6:
    .MissingResourceException: Can't find bundle for base name resources.Messages, locale en
    A snippet from my faces-config.xml file:
         <application>
         <locale-config>
              <default-locale>en_US</default-locale>
    <supported-locale>ko_KR</supported-locale>
         </locale-config>     
              <message-bundle>resources.application</message-bundle>
    <message-bundle>resources.Messages</message-bundle>
              <resource-bundle>
              <base-name>resources.Messages</base-name>
              <var>msgs</var>
              </resource-bundle>
              <resource-bundle>
              <base-name>resources.ErrorMessages</base-name>
              <var>errorMsgs</var>
              </resource-bundle>     
              <resource-bundle>
              <base-name>resources.Labels</base-name>
              <var>labels</var>
              </resource-bundle>     
         </application>
    I have an Enterprise Application (.ear file) that contains one WAR file. The War file includes resources in the following structure:
    .war
    WEB-INF
    classes
    resources
    Messages_en_US.properties
    Messages_ko_KR.properties
    How can I correct this error?

    I successfully installed SAP NetWeaver 7.01 ABAP Trial Version on Vista home edition.  I was able to start the application server by following the steps outlined by Marcelo Ramos at the following link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0c0bdf1-3440-2b10-db8a-ae16f614745d
    I hope this helps someone else as well.
    Barbara

  • Security Error when starting the server - WPLS 7.0

    Security Error when starting the server - WPLS 7.0
    what may be the reason ...
    console :
    BUILD SUCCESSFUL
    Total time: 3 seconds
    Starting WebLogic Server...
    <May 30, 2005 4:22:15 PM IST> <Notice> <Management> <140005> <Loading configuration C:\cpDomain\.\config.xml>
    <May 30, 2005 4:22:18 PM IST> <Info> <Logging> <000000> <FileLogger Opened at C:\cpDomain\portalServer\weblogi
    c.portalServer.log>
    <May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The RoleMapper provider has preexisting LDAP data.>
    <May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The Authorizer provider has preexisting LDAP data.>
    <May 30, 2005 4:22:21 PM IST> <Info> <Security> <090143> <The weblogic keystore provider DefaultKeyStore in re
    alm cprealm cannot be used for private keys because its configured private key keystore file wlDefaultKeyStore
    .jks does not exist.>
    <May 30, 2005 4:22:21 PM IST> <Info> <Security> <090142> <The weblogic keystore provider DefaultKeyStore in re
    alm cprealm cannot be used for trusted (root) CAs because its trusted (root) CA keystore was not configured.>
    <May 30, 2005 4:22:21 PM IST> <Notice> <Security> <090082> <Security initializing using realm cprealm.>
    <May 30, 2005 4:22:21 PM IST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Excep
    tion:java.lang.SecurityException: Authentication for user weblogic denied
    java.lang.SecurityException: Authentication for user weblogic denied
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
    agerDelegateImpl.java:411)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
    ateImpl.java:539)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
    at weblogic.Server.main(Server.java:32)
    >
    <May 30, 2005 4:22:21 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal in
    itialization exception
    Throwable: java.lang.SecurityException: Authentication for user weblogic denied
    java.lang.SecurityException: Authentication for user weblogic denied
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
    agerDelegateImpl.java:411)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
    ateImpl.java:539)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
    at weblogic.Server.main(Server.java:32)
    >
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.SecurityException: Authentication for user weblogic denied
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
    agerDelegateImpl.java:411)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
    ateImpl.java:539)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
    at weblogic.Server.main(Server.java:32)
    Reason: Fatal initialization exception
    Throwable: java.lang.SecurityException: Authentication for user weblogic denied
    java.lang.SecurityException: Authentication for user weblogic denied
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
    agerDelegateImpl.java:411)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
    ateImpl.java:539)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
    at weblogic.Server.main(Server.java:32)
    C:\cpDomain\bin>
    Thanks
    Thanks & Regards,
    Siva VP,
    [email protected]

    Looks like you cannot connect to LDAP. Are you configured correctly?

Maybe you are looking for

  • Windows 7 / Arch Linux Dual-Boot - win7 keeps changing the boot flag!

    Greetings! Its been a long while since I had to dual-boot with windows on the same machine. I 've installed windows 7 and then arch linux and installed GRUB on my sda1 where the /boot partitions is located at. I've managed to boot into arch successfu

  • How to maintain gap between table and graph in a report

    HI, I have a report in which a graph is placed below a table  and data in the table gets increased with time , then how to maintain the gap as constant between table and the graph ?? Like i have 50 rows in a table and then next day 10 rows are added

  • Examples on values to be given for bapi_entrysheet_create

    hi , just have a problem through the bapi i am able to create the entry sheet but the material , i mean the line items are not created.

  • Time Machine - Time Capsule Username/ Password Error

    Hey all, I have this intermittent problem...It seems when I am not using my computer and Time Machine goes to do a backup it gets the following error: Time Machine could not complete the backup. The network backup disk could not be accessed because t

  • Non-destructive layer mask editing?

    I just finished sweetening a mult-layered texture I was creating and suddenly had a thought - I create my texture in overlaid layers so that I can endlessly tweak, and my process is non destructive, but when I create layer masks for each layer, those