Errror while loading data from dso to info cube....
Hi All,
When i am running dtp from dso to cube i get a error i.e :
1. Data package processing terminated
Message no. RSBK229
2. 'Processed with Errors'
Message no. RSBK257
3. Error while updating to target 0FIGL_C10 (type INFOCUBE)
Message no. RSBK241.
So these are the errors i am getting , i am new to BI so how could i solve this errors....
All the transformation are active with no errors.
Thanks in Advance
Regards,
Mrigesh.
Edited by: montz2006 on Dec 7, 2009 8:45 AM
Hi All,
Now i deleted data from dso and data source and again run the dtp,
this time i got data from data-source to dso but , when i am running dtp between dso and cube , i am not finding an error.
Now when i go to cube and see the data the request has came but data has not transferred .....
The Request Status is green in cube but data is not cuming....
Regards,
Mrigesh.
Similar Messages
-
Error While loading data from 8 DSOname to Cube.
Hi All,
while loading data from 8<DSONAME> to CUBE , the data is Sucessfully loaded data into Cube, but the Request Status is shown in Yellow,why it is showing, please tell me how to make it Sucessfull.
Thanks and Regards,
santosh.HI All,
In ST22 i'm getting Short Dump, the Error massage is
MESSAGE_TYPE_X
WHAT HAPPEN
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error Analyis is:
Short text of error message:
Generic process chain
Long text of error message:
Technical information about the message:
Message class....... "RSMPC"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
"MESSAGE_TYPE_X" " "
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM005"
"IF_RSPC_EXECUTE~EXECUTE"
there is any Patch Problem...
Please let me Know how to resolve this issue.
thanks and regards,
santosh. -
Job cancelled While loading data from DSO to CUBE using DTP
Hi All,
while i am loading data frm DSO to CUBE the job load is getting cancelled.
in the job overview i got the following messages
SYST: Date 00/01/0000 not expected.
Job cancelled after system exception ERROR_MESSAGE
wt can be the reason for this error as i have successfully loaded data into 2 layers of DSO before loading the data into the CUBEhi,
Are u loading the flat file to DSO?
then check the data in the PSA in the date field and replace with the correct date.
i think u r using write optimised DSO which is similar to PSA it will take all the data from PSA to DSO.
so clear the data in PSA and then load to DSO and then to CUBE.
If u dont need a date field in CUBE then remove the mapping in transformation in cube and activate and make DTP activate and trigger it it will work. -
ERROR : "Exceptions in Substep: Rules" while loading data from DSO to CUBE
Hi All,
I have a scenario like this.
I was loading data from ODS to cube daily. everything was working fine till 2 days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error "Exceptions in Substep: Rules" after some package of data loaded successfully.
I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again "Exceptions in Substep: Rules".
Can any one tell me how to come out from this situation ?
Regards,
Komik ShahDear,
Check some related SDN posts:
zDSo Loading Problem
Re: Regarding Data load in cube
Re: Regarding Data load in cube
Re: Error : Exceptions in Substep: Rules
Regards,
Syed Hussain. -
Error while loading data from DSO to Infocube
Hi all,
I'm loading data from flat file to the cube via a DSO. I get an error in the DTP.
The data loads to the DSO, i'm able to see the contents in the active data table.
Transformation from DSO to Cube is activated without any errors. Its a one to one mapping. No routines used.
When i execute the DTP ( i use full load option as it is a one time load) i get the following error in DTP: All of which are Red.
Process Request
Data Package 1: Error during processing
Extract from DSO XXXXX
Processing Terminated
The long text of the error gives the msg: Data package 1: Processed with errors RSBK257
ThanksHi,
You can check the below forums.
DTP with error RSBK257
- Jaimin -
Issue while loading data from DSO to Cube
Gurus,
I'm facing a typical problem while loading Cube from a DSO. The load is based upon certain conditions.
Though the data in DSO satisfies those condition, but the Cube is still not being loaded.
All the loads are managed through Process Chains.
Would there be any reason in specific/particular for this type of problem?
Any pointers would be of greatest help !
Regards,
Yaseen & SoujanyaYaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a> -
While loading data from DSO TO CUBE.(which Extraction option)
hi friends,
my questin is that when we load the data from one data target to another data target then we have four options to extract the data in DTP screen from (1.active data table (with archive) 2.active data table (without archive) 3.change log table. and fourth i dont remember.so my question is when we update data like from DSO TO CUBE. Then which option we should choose. 2nd or 3nd.?
<removed_by_moderator>
Edited by: Julius Bussche on Jan 4, 2012 9:26 AM- If you want to do a full load always select 2nd option i.e. Active Data Table (without archive).
- If you wand to do a delta load, you can select either of 2 or 3
Active Data Table (without archive) - first load will be full from active table and after that it will be delta from change log
(ii) Changelog table - you will have to do a full load using a full DTP and then delta can be done using this DTP (but you will need to an init as well using this DTP)
- if you have done using a full DTP and now just want to run delta, select 3rd option and do an init before running delta
I hope it helps.
Regards,
Gaurav -
Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3
Hi All,
We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good,
first time i have loaded the data it is full update.
Second time i init the data load. I pulled the delta from DSO to Cube . DSO is standard where as Cube is partition with the help of semantic partition. What i can see is the records which are updated in Latest delta are shown into the report rest all are ignored by the system.
I tried compression but still it did not worked.
Can some has face this kind
ThanksYaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a> -
Error while loading data from DSO to Cube
Dear Experts,
I have change update routines of the update rule for DSO & update rule between DSO & cube. when i uploading data in DSO , working fine. But when uploading from DSO to cube , it giving error.
Error Message :
DataSource 8ZDSO_ABB does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 30.09.2010 14:05:17.
The time stamp in the BW system is 09.05.2008 16:41:10.
I executed program RS_TRANSTRU_ACTIVATE_ALL , still giving same error.
Regards,
Anand Mehrotra.Dear Experts,
Thanks for help.Problem solved.
Regards,
Anand Mehrotra. -
Error while loading data from DSO to Infocube for 0Fiscvarnt
Hi All,
Could you please help me any one to resolve the below error.
*"Fixed value discrepancy with InfoObject 0FISCVARNT value 'K4 ', expected 'K2 " (MessageClass RSAU).
We have two Staging DSO's upto Second level DSO FiscalyearVariant both K2 and K4 updating, but second level DSO to infocube data loading we had a above problem. all are direct mapping, no routiunes or constants at all transformation level.
But we checked R/3 side both K2 and K4 variants are available.
Thanks,
RameshHi,
It's a constant issue I met before. I guess you have assigned a constant value K2 in your target ODS.
Please change the constant back. Go to RSA1, change target ODS, find 0FISCVARNT, right click it and choose 'Provider-specific Properties', remove K2 from 'Constant'.
Now try the reload and I'm sure no more issues. If you really want the constant then you have to change data or transformation.
p.s. Don't forget re-activating transformations and DTP
Regards,
Frank
Edited by: Frank Lee on Jul 14, 2009 3:13 PM -
Data load failed while loading data from one DSO to another DSO..
Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
SnehaHi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR -
Error while loading data from R/3 into DSO
Hi,
While loading data from 2lis_02_s012 into a DSO the following error occured:
=============================================
Diagnosis
Updating for the information structure is still activated in client 150
(and possibly also in other clients).
System Response
o It is not possible to upload data in the initial mode.
o Generation of the delta update was terminated.
Procedure
1. Switch off updating in all system clients.
2. Repeat the relevant activity.
=============================================
Anyone plz help me in solving the issue.
Thanks & Regards,
VN.Hi VN,
1. Incase you do full update , system will allow you to load without any error.
2. In case you want to do init then
Lock users
Stop the update in the system .
Load init Package
Start the update
Unlock users.
Load delta package.
Hope it helps.
Regards
Mr Kapadia -
Delta records are not loading from DSO to info cube
My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
ShammaData is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue. -
Error while loading data from application server
Hi all,
Am facing a problem while loading data from application server.
The error i get is ....
*" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
when i copy these values into a CSV onto a desktop and load,load is successful.
Please let me know your views.
Thanks&Regards,
PraveenIt looks like the system is trying to convert Rental/Lease to a number format. Is the info object type CHAR or NUMC or ??? I would look there.
Also, make sure / is in RSKC.
Brian -
Unable to load data from DSO to Cube
Good morning all,
I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
Thank you so much!Hi BI User,
For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
So..first do the initialization and perform delta upload into the cube.
Regards,
Subhashini.
Maybe you are looking for
-
Is there a way to change the font in iTunes 10 back to how it used to be?
I don't like the new text font in iTunes 10 at all - is there a way to change it back to how it was? Thanks
-
hi I developed forms using Oracle Developer Suite 10g (9.0.4) and it is work correctly then I install Oracle Developer Suite 10g(10.1.2.0.2) and I compile it their is no error when I run it the browser a bear as gray screen and in the states bar writ
-
In acrobat 8 how do you ungroup objects? The ungroup icon is grey and unusable.
I used Acrobat 8 to convert pdf to a pdf form. The fields were made by the acrobat 8 program. On the form there is a set of yes / no questions with radio buttons. All of the "no" buttons are in one group and all of the "yes" are in another group.
-
Apple TV & Regular TV Listings vs TIVO - HELP!
Maybe this is an obvious answer, but *how do regular TV listings and shows work with Apple TV*? I would like to have Apple TV for movies, Youtube videos, etc..., but I also want to watch my regular TV listings when I choose to - news, some daytime sh
-
Tips for Users with Audio Issues in MPEG Files
I have seen a lot of users expressing issues with getting audio to export correctly in their videos, and I thought I would share what's worked for me. Whenever I'm converting MPEG videos, I have found it useful to open the video with an audio editor