ESS Timesheet error with Clock Times

Hi everyone,
Has anyone seen this issue? (ERP 6.0, EP 7):
Timesheet data entry profile is configured 'With Clock Times' and WITHOUT 'Release on Saving'. On the daily view of the timesheet, when clock times are entered and Refresh or Review is depressed, the number of hours is populated and the following error displays:
"Number of hours not valid when Start Time and End Time are entered"
This only displays:
- when the profile is configured without 'Release on Saving' checked. When it IS checked, the error goes away.
- from the daily view (no clock times on the Weekly View)
- in the portal timesheet, not via CAT2 in ECC
Any suggestions?
Thanks!
Message was edited by:
Frederic Wood

<u>Without checking 'Release on saving':</u> The system checks the number of hours value with the corresponding hours mentioned in IT0007.
<u>On checking 'Release on saving':</u> It overwrites the number of hours stored in IT0007 in the back end system.
This happens because this option has dependency with 'With Clock times' option. For this option, the system automatically deducts unpaid breaks, as determined in the employees's work schedule, when calculating the number of hours.
If this helps, pl do reward.
Thanks
Narasimha

Similar Messages

About +ive Time Mgmt with Clock Time .

Hi SAP-HR Experts .
Plz give me idea about +ive Time Mgmt with Clock Time.
I maintained , Infotype 50 , (created from 01.04.2007)
When i tried to maintained Infotype 2011 . (from 01.04.2007) record is not created , it gives
warning (date is with in selection period) when i press Enter Key over it , No record is created in infotype 2011 .
I sat feature TMSTA = 1 .
In infotype 7 , i maintained Time Mgmt status = 1 .
I want to know what Time Evaluation Report (RPTIME00) will give to me ?
How do i confirm my self that now SAP-HR is running on +ive Time Mgmt with Clock Time.?
Please guide me ...
Regards : Rajneesh (9873607039)
Edited by: Rajneesh Kumar on Nov 18, 2008 6:02 AM

Hi Rajneesh,
When you run time evaluation through PT60 schema TM00 you will get the following:
1. Clock in and Clock out entry
All recorded time data documenting the actual attendance times or the actual absence times of employees.
Actual time has the opposite meaning of planned working time.
Example:
According to the work schedule, an employee is supposed to work from 8:00 a.m. to 5:00 p.m. on December 3, 1999 (planned working time). The actual time data (actual times) from this day is shown below:
8:00 a.m. to 2:30 p.m. Attendance
2:00 p.m. to 5:00 p.m. Absence - doctor's appointment
2. SKELETON TIME
skeleton time is a time account in which payment-related times of an employee are managed.
Skeleton time is determined in time evaluation.
Example:
Skeleton time in the standard SAP System consists of:
u2022     Attendance, absence, and off-site work within a contractual period (start and end of working time)
u2022     Overtime hours that exceed approved overtime
u2022     Paid break times
3. FLEXTIME
Working time pattern in which employees can individually determine their own start and end times, as long as a certain number of hours is worked within a defined period of time each day.
*4. FILL TIME
A specific period of working time described in time evaluation that lies within the contractual start and end of working time (excluding breaks).
If an employee works a flextime schedule and is also expected to be at work at certain times (core times), then fill time indicates the difference between the start and end of working time (without breaks) and the core times
5. PRODUCTIVE TIME
The usable working time for a resource. The system determines the productive time using the working time data and utilization rate for the resource as follows:
Productive time = (End of working time - start of working time - break
duration) x Rate of utilization / 100%.
You estimate the downtime at the resource using the utilization rate.
And the results of the following will depend on your settings...
Time evaluation will update the quotas and it will form time balances
I hope this information is enough to understand...for more clarifications revert to me..
Regards,
KPJ

HT3275 Can some HELP, I keep getting this error with my Time Machine Back up, "The backup disk image "/Volumes/JKPN Safe/JKPN IMAC.sparsebundle" is already in use.

Can some one HELP me , I keep getting this error with my Time Machine Back up, "The backup disk image “/Volumes/JKPN Safe/JKPN IMAC.sparsebundle” is already in use.

See > http://pondini.org/TM/C12.html

Payroll using time evaluation with clock times

Dear all,
I have configured an employee to have time management status 1, and my company would like to use attendance for time recording instead of time event since our clocking interface cannot provide exact clock times. I have also configured HRSIF to return 1 for all conditions.
I found every thing run correctly after creating the attendance records for all days of a payroll period while all attendance hours are equal to the planned work time. However, I have modified some of the days to attendance hours less than planned working hours (with no exact time inputted), I've noticed that the time evaluation can be processed successfully, but the attendance hours are not being calculated in the payroll result.
Does SAP actually support payroll for attendance with no exact clock time? If yes, what may I miss in my configurations?
Thanks
Steven

Hi,
Thanks for the advice.
For suggestion 1, yes, it can do I want if the attendance hours is actuall equal to the planned working hours. However, say I have a case that the planned working hours is 8, and a workman shows up for 6 hours and take 2 hours leave, the system still require me to enter the clock time in order to get the attendance and absence be calculated.
For suggestion 2, I understand that there's always be way if I do programming, however, my company decided not to do any customization, so I should first find if there's a default solution in SAP.
Thanks.
Steven

Timesheet Error with custom Line Classifications in Project Server 2013

We implemented Project Server 2013 last year and began using timesheets. We are a billable consulting group. In order manage our billing, we have created three custom line classifications, "Billable Onsite", "Billable Offsite",
and "Non-billable". We do not use "Standard" as a line where time is entered. We are using SEM. We have chosen no prepopulation on timesheets. Our system is updated through the March 2013 update.
The error we get is presented as "__error Loading" with the title bar of the pop-up reading "Message from webpage". This occurs when you attempt to add a new line to a timesheet and choose one of the custom line classifications.
A confusing aspect to this, while we have prepopulation turned off, the timesheet is populated with "Standard" lines for the tasks that are currently assigned to the user. We have come up with a workaround that works sometimes but not all the
time. When the user receives this error, they move away from the timesheet screen and then return. They add all of the applicable lines to the timesheet with "Standard" even if they already exist on the timesheet and save. Then
they add the lines with the appropriate line classification and the time. If they receive the "__error loading" error again, then the timesheet can not be corrected. You must delete the timesheet and recreate. We have been able
to recreate the problem in a vanilla install with a custom line classification added.
Just yesterday, I was able to find a error log entry that may help some of you identify the source:
General Unhandled Exception in _TimeSheet.GetTimesheetForGridJsonFromViewUid_ Attributes: System.ArgumentException: Assignment line already exists for assignment uid: d9afeb60-d589-e311-bd64-08edb9dd8afb     at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.VerifyLineIsUnique(Guid
assignmentUid, Guid taskUid, Guid projectUid, Guid lineClassUid)
at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.CreateAssignmentLine(Guid assignmentUid, Guid taskUid, Guid projectUid, Guid lineClassUid, String taskName, String projectName)     at Microsoft.Office.Project.Server.BusinessLayer.TimesheetSEM.CreateAssignmentLine(Guid
assignmentUid, Guid taskUid, Guid projectUid, Guid lineClassUid, String taskName, String projectName)     at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.AddTimesheetLine(Guid assignmentUid, Guid taskUid, Guid projectUid, Guid
classUid, ValidationType validationType, Guid lineUid, String taskName, String projectName, String comment)     at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.ImportTimesheetLine(NewTask importedLine)
at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.<>c__DisplayClass4c.<AddNewLines>b__49(NewTask line)     at Microsoft.Office.Project.Server.Library.PSUtility.Apply[T](IEnumerable`1 enumerable, Action`1 fn)
at Microsoft.Office.Project.Server.BusinessLayer.Timesheet.AddNewLines(IEnumerable`1 newLines)     at Microsoft.Office.Project.Server.BusinessLayer.TimesheetSEM.AddNewLines(IEnumerable`1 newLines)     at Microsoft.Office.Project.Server.BusinessLayer.TimesheetLoaderForGrid.Load()
at Microsoft.Office.Project.Server.BusinessLayer.TimeSheet.GetTimesheetForGridJsonFromViewUid(JsGridSerializerArguments gridSerializerArgs, Guid tsUid, Guid viewUid, String changesJson, String viewOptionsJson)     at Microsoft.Office.Project.Server.Wcf.Implementation.PWAImpl.<>c__DisplayClass2f5.<TimeSheetGetTimesheetForGridJsonFromViewUid>b__2f4()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions) . Standard Information: PSI Entry Point: Project User: i:0#.w|mayberry\nunderwood
Correlation Id: 91c4ca27-6492-e311-93ff-00155d149902 PWA Site URL: XXX SA Name: Project Services Application PSError: GeneralUnhandledException (42), LogLevelManager Warning-ulsID:0x00101622 has no entities explicitly specified.
We have not been able to find any similar timesheet issues here or on other boards. Our users, as you can imagine, are getting increasingly frustrated. A ny advice?
Thanks,
Nate

More scenario testing today. Tested with both "No Prepopulation" and populate assigned task options! no difference in our instance. We are only updated through March 2013, waiting for IT support. We have previously tried the deactivation/reactivation
of custom classifications. Tried with and without template, no difference. So the new scenario and findings:
1. Create a project with 2 tasks, one assigned and one not. Save and publish.
2. Create a timesheet, do not use an existing timesheet. Here we found, in spite of population option chosen, the timesheet was populated with a Standard line for the assigned task. With no action taken other than creating timesheet, the reporting assignment
table showed the new entry.
3. Add an assignment to the other task in the project, publish.
4. Open the same timesheet period. Now I saw the other task appear on the screen. It did not show in the database. I could not save to make it appear in the database unless I did something else to the screen to make it "dirty". Once I did that,
I could save and the second Standard line appeared In the database.
If I tried to add a custom line class line to the TS when the Standard line was not in the database, I get the error. It doesn't matter if it shows on the screen.
If it shows on the screen but not in the db, and I attempt to add a non-standard line, it will error, unless I manually add the standard line first. The user would not know to do this.
You will not be able to reproduce if you make the assignments and then create the TS. You need to try in reverse order.
It appears as though there are issues with both the timesheet population options and the code that runs when the TS loads after it's initial creation. I'm wondering why on creation the standard line is created and committed to the db, but on reload with
new tasks it doesn't' do the same. Also when No Prepopulation is turned on, why my time sheets are always prepopulated.
Sorry for any typos, working from my ipad keyboard. Thanks for your help!

Windows 7 Blue Screen Errors (with Apple Time Capsule)

Can anyone tell me whether Apple has found a way to make the Apple Time Capsule work with Windows 7 without causing a blue screen error every time it is used? BTW, it works perfectly on Windows XP and Windows Vista.
Note: The Apple Time Capsule does not yet support Windows 7 (see specifications).

Can anyone tell me whether Apple has found a way to make the Apple Time Capsule work with Windows 7 without causing a blue screen error every time it is used? BTW, it works perfectly on Windows XP and Windows Vista.
Note: The Apple Time Capsule does not yet support Windows 7 (see specifications).

C903 error with Date & Time

Hi all,
First time posting here.
I have a S.E. C903, which has been great but recently developed a fault with the calender/date & time settings. Basically it wont let me set them to the correct time, wvery time I re-set it, it wont save. Ive tried taking the battery out & leaving it for a while, when I power on asks me to set it but wont save. I've tried resetting to factory defaults with the same results. software version is up to date (1214-617 5R1EA032 090501). Any ideas anyone?
Solved!
Go to Solution.

You can try updating or re-installing the software using the SE update service on your PC.

Errors with Time Machine (not completing backup, and needing to erase the ".inProgress" package)

I have in a previous discussion been talking about errors with my Time Machine backup. The errors were with a problem with Indexing a file, it fails and stops the whole backup. Each time it attemps another backup, it fills my ".inProgress" package with a (nearly) whole backup, filling my Time Machine hard drive, and thus errasing my previous good backups. The error occurs after about 95% completion.
In my last post of a similar disscussion, the problem was indexing the Preference Pane files and this caused the whole backup to fail. This was my last post there: (below in some additional info of my situation)
I did exclude the MobileMe.prefPane. And I got:
12/16/11 9:24:50.468 PM com.apple.backupd: Starting standard backup
12/16/11 9:24:50.556 PM com.apple.backupd: Backing up to: /Volumes/3 TB GoFlex Drive/Backups.backupdb
12/16/11 9:25:14.418 PM com.apple.backupd: Waiting for index to be ready (101)
12/16/11 9:27:02.366 PM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|
12/16/11 9:27:02.366 PM com.apple.backupd: Finished scan
12/16/11 9:33:37.119 PM com.apple.backupd: Deep event scan at path:/Volumes/Mac OS Lion GM reason:must scan subdirs|
12/16/11 9:33:37.119 PM com.apple.backupd: Finished scan
12/16/11 9:36:15.650 PM com.apple.backupd: 758.92 GB required (including padding), 830.32 GB available
12/16/11 10:25:14.873 PM com.apple.backupd: Copied 22.8 GB of 630.5 GB, 782749 of 2357620 items
12/16/11 11:25:15.335 PM com.apple.backupd: Copied 86.6 GB of 630.5 GB, 1167675 of 2357620 items
12/17/11 12:25:16.227 AM com.apple.backupd: Copied 152.2 GB of 630.5 GB, 1393795 of 2357620 items
Dec 17 01:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 305.2 GB of 630.5 GB, 1413946 of 2357620 items
Dec 17 02:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 457.1 GB of 630.5 GB, 1419190 of 2357620 items
Dec 17 03:19:07 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 1736865 files (568.3 GB) from volume Macintosh HD.
Dec 17 03:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 572.1 GB of 630.5 GB, 1848939 of 2357620 items
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Indexing a file failed. Returned 200 for: /Volumes/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane, /Volumes/3 TB GoFlex Drive/Backups.backupdb/Tom iMac/2011-12-14-171406.inProgress/7DB524DD-EFB9-42A6-8A21-0A2A312EDA6D/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Aborting backup because indexing a file failed.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Stopping backup.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 2164998 files (581.1 GB) from volume Mac OS Lion GM.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copy stage failed with error:11
Dec 17 03:40:50 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Backup failed with error: 11
This time it was the Mouse.prefPane that caused the error. I'd like to exclude the entire PreferencePanes directory.
This was my error message this time:
I just realized this was on my small Developers partition. Perhaps there is an error with the build, OR an error with the initial restore. I'd like to perhaps exclude the entire /Volumes/Mac OS Lion GM. I expect that Time Machine is working fine with my main partition and the error happens when it's almost done with the Mac OS Lion GM partition.
The problem now is that I only have 265 GB of 3 TB available on my Time Machine HDD. If attempt another backup, it'll surely erase about 410 GB of my past saved backups. I've already lost 6 months, and I only have two months left of backups. I need to erase the ".inProgress" package again. That'll take time, and it's impossible to do from this main partition, even at root access. This ".inProgress" has a total of two (nearly) full backups; it didn't cleanup the first full backup attempt while starting the second,perhaps it would have had it finished. But I fear even if I exclude the whole "Mac OS Lion GM" partition, It'll create a third full backup before cleanup and erase ~400 GB of previous good backups. Then, I'll have a total of 4 (nearly) full backups! 3 TB is just enough without any past backups.
Maybe I'll just copy my documentations of my 'errasing the ".inProgress" package' last time (from the Mac OS Lion GM partition) and do a full restore of just that partition. Thus erasing the errors all together. If it doesn't fix the errors then this could be a bug in the build that doesn't allow Time Machine to work. I've always included this partition in Time Machine before, even with other Lion builds, so I suspect that it was an error in the initial restore. (I may be answering my own questions, and that the inital restore (of the small partition) is the problem, and I just need to re-restore the small partition)
Again, I'm going to have to erase the ".inProgress" file to regain 1.53 TB of space before proceeding.
Also, I gave myself permission to read the ".Backup.345781513.887697.log", the log that was created last night when I first started Time Machine this last time. It was interesting, but didn't show the error I could see from the console.
Right now, mds and mdworker appear to be going crazy even after I just now turned off Time Machine. I think I'll let it go for the rest of the night. Then I'll work on erasing the ".inProgress" package from the other partition boot up.
That was my entire last post. To add some information, I have two OS X partitons, both Mac OS X Lion. One is my large main partition, the other is one I don't mind testing with. I recently replaced my internal hard drive in my iMac and restored from Time Machine both partitions. This appeared to go smoothly. But I have yet to create a single successful Time Machine backup since. At first it was doing a Full Backup, which I didn't like, but now it just aborts around 95% completion. Each, time, it tries it fills the Time Machine hard drive with duplicate (nearly) full backups errasing my older good backups. I would like to erase the ".inProgress" file to save space.
My main question in this new discussion is does anyone know of a good way of erasing the ".inProgress" file? This is so I can preseerve my previous backups. ACLs and other permissions seem to make it impossible to erase from this startup partition, the one I'm running Time Machine from. Even at root level, if I give myself permission to change permissions or delete a file, it'll say Operation not Permitted instead of Permission Denied. I have been able to delete this ".inProgress" package before when booting from the other partition, but with great difficulty. I have had much help from another Member in this Support Community when it comes to solving my Time Machine problems. I think I have found the problem (indexing files in my small OS X partition), as stated in my copy& pasted post above, but I really need to delete this inProgress package first to save space before continuing!

Pondini wrote:
Gator TPK wrote:
Now I'll have to fix the small partition? How's the best way to do this? There could be thousands of files that won't index fine.
See if there's anything you haven't done, that applies, in the pink box of #C3 in Time Machine - Troubleshooting
Otherwise, since most (or all?) of the indexing errors are in OSX, you might want to just reinstall it. Something may have gone wrong sometime, that damaged those files.
I reviewed #C3 in Time Machine - Troubleshooting and I have already done most of those things. I have just learned something new though:
When I included my Main OS X partition again, I got an indexing error for the first time for that partition. I might be interesting to note that the _spotlight process was running, and it's running again (the magnifying glass has a dot and it generically says "Indexing Tom's iMac"). mdworker, mds and backupd processes really are working hard, one moment they used over 500% of my CPU. It's nice to know for once quad core is good for something other than video encoding. (Now if they could just get the Finder to do more than 100.1%, only 1 thread is doing 100%, I'd like to see file size calculations 8 times quicker!)
I never got an indexing error once in the past 2 weeks for that large Mac OS X v10.7.2 main volume, and it had appeared to finish that partition backup before running into problems with my smaller test partition. Also, I had just updated the smaller test partition with a later build of Mac OS X. But It appears that the beta builds are clearly not the problem. I thought I could just restore again (from the December 4th backup) the small partition and both would be fine.
I'll finish reviewing all the suggestions on Time Machine - Troubleshooting and go from there. Hopefully, the _spotlight indexing simutaniously was the only problem. It's strange that the indexing hasn't happened since the original restore last week untill I finally got a good clean complete partial Time Machine backup. Why would the first Time Machine backup trigger indexing again?
For now, I'm going to exclude the Main Partition again, and let another good backup run. And try your suggestions. (And wait till mds, mdworker, etc. to finish!)
I have the logs of the first two sucsessful backups and the last two failed backups from the last 3 hours, if that would help.?

Time valuation with and without clock times --- Plzz help

hi experts
Please help me by explaining the following.
1) Please explain me the differnces between time valuation with
   clock times(T555Z) and time evluation without clock time(T555Y).
2) Please explain the differences in time types and processing types and functions procedure used in time                evaluation with clock time and in time evaluation with out clock times.
3) What is the major differences in the schema between time evaluation with clock times and with out clock   time?
Thanx in advance for help and Points will be rewarded in full.
regards,

WITH CLOCK TIME
It processes time data that has been imported to the SAP system from time recording subsystems and data that has been recorded online. Those time events (in/out timing) will be stored in 2011 which will be used in schema processing.
Without clock time
to evaluate the time data of employees who enter only exceptions to the work schedule. Processing in this component assumes that times are expressed as the duration of work, and not the start and end times of work times and employee absences
Clock times are not required for evaluation of time data
T555y is used for processing work times (function Types)
T555z is used for breaks processing in time schemas (function Types)
2. NO difference in the way they are used
3. Schema TM00 (clock times) is a standard schema, used to evaluate employee time data that has been recorded at time recording terminals and that specifies clock times.
Schema TM01 is a standard schema used to evaluate the time data of employees for whom only deviations from the work schedule are recorded.

Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK

Hello,
We use timesheet (CATS) in a separate SAP system from the SAP system in which HR resides.
I found out how the loosely coupled scenario with CATS works with a SAP HR system. We transfer the workschedule and absence data with report RPTIMEOVERVIEW_REPLICATE to the SAP system in which CATS is used. This data is then available in the PTIMEOV1 table to perform time checks in CATS. The distribution model for ALE takes care of the fact that the data is posted into table PTIMEOV1. With BD97 I set up that the BAPI: PTMGREXTATTABS.CHECK has RFCdestination for synchronous calls = LOCAL_EXEC.
When I want to record on an attendance code without clock times then the above works fine. The SAP system in which CATS resides looks into table PTIMEOV1. So far so good.
However, when I want to record hours WITH clock times then I cannot save the data. The error message HRTIM00CATS667 shows up:
"Communication error with the LOCAL_EXEC Function BAPI_PTMGREXTATTABS_CHECK is no t available system"
Diagnosis
An error has occured during communication with the HR System. The HR data in the time sheet cannot be validated.
From the error message description it seems that it wants to check the SAP HR system instead of looking for the check in the SAP system in which CATS resides.....
When I change the value from LOCAL_EXEC to the system in which HR resides then the error disappears, but then it really checks into the SAP HR system (synchronous check with that SAP HR system) and that is not what the customer wants. The check should be local on the PTIMEOV1 table (in case the SAP HR system is down).
I did not find any OSS notes on the topic....or other info on SDN.
Can anyone help me out concerning this starnge error message, at least for me?
Thanks very much in advance,
Kind regards,
Mirko

"A point to add"
I just noticed that following message is being continously receiving in the database alert_log:
Sat Oct 9 16:04:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:05:32 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:06:30 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:07:10 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:09:35 2010
Incremental checkpoint up to RBA [0x1d.1f9928.0], current log tail at RBA [0x1d.1f9a79.0]
Sat Oct 9 16:11:52 2010
WARNING: inbound connection timed out (ORA-3136)
Sat Oct 9 16:29:40 2010
Incremental checkpoint up to RBA [0x1d.1f9b87.0], current log tail at RBA [0x1d.1f9bf4.0]
~
Please help.

Register exact clock times (4 digits) instead of half-hour increments in Record Working Time (Calendar User Interface)?

Hello
Is it possible to register the exact working times in the HRESS_A_CATS_CALUI WDA instead of half an hour increments?
Now:
choose between 0800 to 0830
Need:
0810 to 0825

In calendar interface, standard is 30, but if you need 15 etc you need to a modification etc, use the normal interface with clock times or in details screen you can enter clock times enable fore the cats profile using CAC1 http://scn.sap.com/thread/3678682

CATS rounding difference using clock times

Hello!
We are facing rounding differences during CATS recording with clock times. E.g. we record multiple entries with 5 minutes in transaction CAT2:
Clock Time -> CATS-hours
9:00 - 9:05 -> 0,08
9:05 - 9:10 -> 0,08
9:10 - 9:15 -> 0,08
9:15 - 9:20 -> 0,08
Sum of Minutes entered = 20
Sum of CATS-hours displayed = 0,32 which equals to 19 Minutes
As the number of entries increases the rounding difference get bigger.
Our company requires to-the-minutes time recording and by the way the employees get confused by the sum displayed.
Do you have any ideas to solve this issue?
Thanks in advance and best regards
Reinhard
Edited by: Reinhard Paizoni on Dec 2, 2010 10:10 AM

Hello,
You should use enhancement (user-exit) CATP0001 to validate this. You should write your coding for that as well.
Link below is not that of good use but I am putting for your reference.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/64/400463470211d189720000e8322d00/frameset.htm
REgards,
Bentow.

Error: 0271: Real Time Clock Error - Check Date and Time settings.

Hello all,
I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
Any advice would be appreciated.

Thanks to everyone for the help. Just want to close this out. I had a IBM/Lenovo technician here today and he replaced the CMOS battery. Upon the change, the computer is fine being reconnected to the dock (the three times I tried it). So it has been resolved with the battery. Surprised by the incompatibility claim because I am not having issues now. Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
Thanks!

Error in recording time sheet in ESS

Hi friends
i have encountered a problem while recording working time in ESS . when i click on review button its giving error:"08.10.2008: Enter relevant working time attributes"
i am using weely view.
But In the CAT2 transacton it is working fine i.e i am able to save my data against activity type
looking forward for your valuable guidance.
Regards
Sam

Hi Patlolla Mallik...
Thanks for your reply. But selection of attendance/absences is not required as CATS(ESS) is integrated with Cprojects. it is workign fine using CATS transaction.
But problem occurs in ESS only.
Regards
Samrat

Consumer Proxy Time Account ESS Timesheet

Hi Folks,
On the ESS timesheet, we have been facing a recurring Error message saying: "System error: No receiver could be determined".
I've been looking over the whole web, found some hints about how to make this message disappear, and it seems that the key transaction is SOAMANAGER.
Unfortunately, after loads of test configuring Service definitions and Consumer proxies i can't make it go away.
I'm not sure i'm using the right Service definition and Consumer Proxies, I've did my tests on the followings:
Service --> EETMECAL_WTS_EE_QR
Consumer --> CO_CATS_EMPLOYEE_TIME_CALENDAR
Does anyone already did this configuration and could lead me to a solution?
Just a quick recall, this message appeared after checking the foloowing checkbox in CAC1:
Thanks in advance for any kind of help you could provide me.
Jules Letombe

Hello,
Do you still have an issue with this? If not never mind.
I happened to read this to configure our own scenario. I am able to get this resolved. We are not using PI so it was easier. But if you are then I see couple of issues.
In the above image, set the role to Application System. Create a HTTP type RFC connection and name it as INTEGRATION_SERVER. In the RFC the path prefix should be "/sap/xi/engine?type=entry".
To answer your error messages below
System NOt yet configured : System error: System not configured as XI Integration Engine - NA
Application system : System error: URL to call the Integration Server is missing on t - see below
Integration Server :System error: Proxy calls are not permitted on sender or receiver - NA
In the Configuration URL enter http://hsape06db:8006. System error "URL to call" error will be gone.
There might be more issues depending on whether you have all the PI configuration in place.
thanks

ESS Timesheet error with Clock Times

Similar Messages

Maybe you are looking for