ESSBASE - ARBORPATH to NAS very slow
Hello,
I installed latest ESSBAASE and point ARBORPATH to use NAS storage, the peroframce got veyr poor, copmare if I am using eesbase and ARBORPATH is ponting to local disk
Are there are any know issues I am using Winodws 2008 R2 64 bit
Thank you,
but you say you pointed the arborpath to the SAN. Saying that indicates to me that the software is installed there.
What software are you referring to? In 11.1.2.x the binaries should be installed under EPMSystem11R1 and under the arborpath it will be the apps, .sec , cfg
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
Mac Pro very slow with NAS (network attached storage) after OSX Update
*Hello,*
**I seem to have a rather unknown problem because after hours of google'ing I found nothing.**
**I'm working on a late 2008 Mac Pro with the 8 core Nehalem processor and 12 gigs of ram and some other hardware like a Blackmagic Decklink HD extreme.**
**(If you care to know the exact specs I can gives those to you, but right now I'm degrading the Mac Pro to 10.6.0.)**
**The Mac Pro connects via an ethernet cable > ethernet breakout > directly to an Mac Pro G5 PPC on a CAT5.E ethernet cable.**
**This G5 is running leopard and has our hard drives and RAID connected to it of which we work on our Mac Pro 2008. Normally this gives us the ability to read with over 100 mb/s and write at about 70 mb/s (Blackmagic diskspeed test).**
**But recently our drives got really, really slow. It wouldn't even play PAL footage realtime in our Final Cut timeline.**
**But as we downgrade to 10.6.0 this problem is gone. So we think that when we upgrade to 10.6.5, the problem initiates.**
**How does this happen and, more importantly, how do we get rid of this?!**
**Good to know; our 27" iMac or any other device in this building _does not have_ this problem. It's just the Mac Pro after an update.**
**Please help us out.**
**Kind regards,**
*W.*I have the same problem with any mac that has 10.6. On macs that I can go back to 10.5 on they work fine and fast. I install a used system at a client and that CPU is new enough to not be able to revert to 10.5 and their NAS is so slow that it is unless. So it's Apple's problem, they broke the protocol for NAS in 10.6 and will not fix it. My clients don't want to make the Move to 10.7 at this time,I am not eve sure if NAS will work well with 10.7 and I think Apple has to rethink its policy of forces us to upgrade to the lastest OS to get their problems fixed. Fix 10.6 to NAS protocol.
Maybe we don't need major system upgrades every year.. Fix the current system before you give us more problems with a major OS upgrade.
Now I might sound tainted, but I have been an Apple person since the first, Apple II came to market.. I sold many of them. So lets not go back to Apple 1980's when they couldn't get anything right.. They may be all powerful, now but they need to remember when there were rumors of them being sold and the stock sold for $11.00 a share.
I have searched for a fix, and many forums have stated the problem, but I just can't figure why they haven't relized that Apple mess up the protocol in 10.6. Its simple, everything works fine on 10.5 they forced us to upgrade to 10.6 and it's broke. go back to 10.5 and it's fixed. So logic states that Apple's 10.6 is different when it comes to NAS protocols... Simple... Fix go back to 10.5 Real fix.. Apple needs to fix it with a patch to 10.6
I have no problems with someone proving me wrong that it works fine, in 10.5 and is broken, very slow in 10.6.. -
Hi,
When copying large files (100GB) from my macbook air to my Qnap NAS the transfer is very slow (100kB/s). It becomes immediately much faster (10MB/s) when I lock my session.
The MBA is connected via the gigabit port of the thundrbold display and a gigabit switch to the gigabit port of the NAS.
There is negligible other network activity shown when monitoring NAS or MBA bandwith usage.
So what can limit bandwith of a mac while in unlocked session?
Is the a bug in thunderbolt display dramtically deminishing bandwith when used? Bandwitdth is already high when locked and display shows login screen. It does not need to fall asleep.
ThxI want to thank you for your help but I think I have to give up. I've been trying for days to get the MBP just to recognise the NFS share. I've tried adding a server in Finder with no luck. I tried Directory Utility with full R/W access setup on NAS, then tried accessing root NAS folder, then the specific share folders, then with specific user enabled on the specific share folders but whatever I try I get nothing. I've changed my local username and password and UID on the Mac to exactly the same one I use for my NAS but it still won't find it and none of the command line options that people suggest do anything at all. I've tried SMB and AFP but they're both sluggish and nowhere near the performance of XP on the same hardware. For an OS that supposedly 'Just Works' I've had a very complicated, tedious and fruitless experience (pun intended). Maybe it's just me because others seem to report no problems accessing their NFS shares or transferring at high speeds with AFP or even SMB but I've had no luck whatsoever. Very frustrating indeed.
Again, sincere thanks for your time and I'll tag the post as answered because for all intents and purposes you answered my question very well. Unfortunately, this Mac just doesn't like me and I don't think I'll be spending money on one anytime soon. -
Hello,
in my Office we're working with Macs and PCs and all the data is on a NAS.
Here is our configuration:
NAS <-link1->Switch<-Link2->Macs or PC.
Macs are connected with AFP protocol (because SMB is very slow).
We want to use Link Aggregation between the NAS and the switch (with 802.3ad procotol) but when we do that all the Macs have a very slow access to the NAS. But all is OK with the PCs.
What can we do? Is there a problem with macOS X and link aggregation?
Thank you for your help.
NicolasSorry, not sure what the question is exactly.
You must have an Xserve, or Ethernet cards capable of Jumbo Frames for one, I assume the Switch & NAS are capable?
Possible clues...
http://docs.info.apple.com/article.html?path=ServerAdmin/10.4/en/c3ha3.html
http://discussions.apple.com/thread.jspa?threadID=1715388&tstart=0
http://www.macnn.com/articles/04/06/21/link.aggregation.for.macs/
http://www.smallnetbuilder.com/content/view/30556/53/
http://www.afp548.com/forum/viewtopic.php?showtopic=8309 -
Essbase Cluster COPYAPP very slow
Hello,
I set the Essbase cluster version 11.1.2, and when I trying to copyapp using esscmd it very slow compare to preveouse version none weblogic v11
on version 11 copy application 1.2GB take 3 min
on new version 11.1.2 copy application takes more then 10 min
what could be wrong that I set, or area that I can take look
thank you,Hi Prateek ,
First and best way to see what is happening with this particular node would be to set the following trace sections with full verbose tracing :
folders*,requestaudit,systemdatabase,socketrequest
With these tracing sections set access from DIS 2nd node and wait till the final results come .
Once either the folders show up or operation times out navigate to View server output and refresh the section , capture the logs to see if there is any particular section that creates this bottleneck .
Also check how good is the connection from DIS to the second node host machine ? That also might create a specific issue like this .
Thanks,
Srinath -
Hello guys,
I have a small problem. Our essbase server had gone extremely slow, to the pointwhere a simple datacopy from scenarioA to scenarioB takes 3 mins instead of 30 secs. Copying a database used to be 10 mins, now it's 45 mins.
The server was restarted yet the problem is not resolved. The RAM utilisation is low, no processes running with high memory. So not sure what can I do, I even tried restarting the Essbase services but no luck yet.
Regards,
N13Is it a virtual server or a Physical Server? I am just trying to get additional information to assist with troubleshooting.
some of the most common issues for slowdowns are:
1. Resource Starvation (this may not be readily apparent on a virtual server where you may not have actual RAM, it may be virtual memory allocated to your VM's RAM - which is devastatingly slow)
2. Fragmentation of your DB. I have seen Essbase DBs slow down by 400%-1000% overnight if many calcs were run, which causes immense fragmentation (hence the avg clustering ratio question)
3. Errant processes running on the essbase server. This should have been rectified by restarting the Essbase server
4. Someone did something to drastically increase the DB size.
If we aren't going to go into details, do a level 0 export, drop all the data, reload it. AGG up the cube, and restart the server/image.
That will fix most of the potential issues. -
WebAnalysis/WebAdminServicesConsole very slow (because of java applet)
Hello,
Context: Hyperion System 9.3.1
server1, Windows -> installed Administration Services e BI+ (Workspace, Web Analysis ecc)
server2, AIX -> installed Essbase
The client has externalized the software/hardware so we have:
network A =client's network
network B = Internet Service provider network
network C =network of the society to which client has externalized the hardware
The communication path is: network A -> network B -> network C
server1 and server2 are on network C.
From the client's computers in network A, Web Analysis Studio and Web Administration Services Console (both using java applets)
have very very slow response times. To give you an idea, an blank report in Web Analysis needs 10min to open. With Web Admin Console I can't do anything: in an empty outline, I added 2 dimensions with 1 member each, when I tried 'Save outline' after 20mins of waiting a response the system also freezed.
When I work in remote control directly on server1, Web Analysis studio and Web Admin Console are very very fast.
This happens only with these two components, the other web components not using java applet (Workspace ecc) don't have this problem.
That made me think there is a network issue. But ping and tracert to both servers (1,2) from the client machines gave me positive results.
I don't know what else to test/try.
Any help will be appreciated!
Thank you!
DanielaCiao,
It seems Web Analysis works well only with jre 1.5.0 update 11. I had java 1.6.0 update 4. I had disintalled java 1.6.0_4, installed 1.5.0_11 and now web analysis applet won't even load.
The java console makes me see the following messages (I replaced by hand the real server name with the server_name):
Java Plug-in 1.5.0_11
Uso della versione JRE 1.5.0_11 Java HotSpot(TM) Client VM
Directory principale utente = C:\Documents and Settings\Administrator
c: cancella finestra console
f: finalizza oggetti nella coda di finalizzazione
g: recupera spazio
h: visualizza questo messaggio di aiuto
l: esegui dump dell'elenco classloader
m: stampa utilizzo memoria
o: attiva registrazione eventi
p: ricarica configurazione proxy
q: nascondi console
r: ricarica configurazione criteri
s: esegui dump delle proprietà del sistema e dell'installazione
t: esegui dump dell'elenco thread
v: esegui dump dello stack del thread
x: cancella cache classloader
0-5: imposta livello di traccia su <n>
[WARN] HYABaseClient - -Analyzer Client Version=9.3.1.0.0.248
[WARN] HYABaseClient - -ServerURL=http://server_name/WebAnalysis/processor
[INFO] ProxyHttpClientHelper - -[PROXY_INIT] - Detect proxy settings using JavaPlugin Proxy Service...
[INFO] ProxyHttpClientHelper - -[PROXY_INIT] - Proxy settings missed or bypassed. Go to sever directly
[INFO] ProxyHttpClientHelper - -[PROXY_INIT] - Proxy settings are detected successfully.
java.net.UnknownHostException: server_name
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.checkProxySettings(HttpRequestProcessor.java:269)
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.checkProxySettings(HttpRequestProcessor.java:234)
at com.hyperion.analyzer.usersession_base.HYABaseClient.obtainProxySettings(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
[WARN] HYABaseClient - -Using Config: config_client.xml
[INFO] SessionScopeBindingToJVM - -Releasing services for session: Unbound/Undefined SessionId
[ERROR] ServiceManager - -Creating dummy lock.
[INFO] SessionScopeBindingToJVM - -Creating token for session: INITIALIZATION
[INFO] HttpRequestProcessor - -ServerURL=http://server_name/WebAnalysis/processor
[INFO] HttpRequestProcessor - -Connect to server DIRECTLY
[INFO] EventHandlerAsynchronous - -Created 3 worker threads.
[ERROR] NamingServiceProxy - -Could not retrieve root entry. <org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.>org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.atf.services.distributed.clientproxies.NamingServiceProxy.getRootEntry(NamingServiceProxy.java:1008)
at com.hyperion.atf.internal.services.naming.NamingServiceProxy.getRootEntry(NamingServiceProxy.java:119)
at com.hyperion.atf.internal.services.naming.NamingServiceProxy.initialize(NamingServiceProxy.java:102)
at com.hyperion.atf.internal.services.containers.UserSessionContainer.initialize(UserSessionContainer.java:119)
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:526)
at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:271)
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:503)
at com.hyperion.atf.services.ServiceManager.initServiceContainer(ServiceManager.java:463)
at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:661)
at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:480)
at com.hyperion.atf.services.distributed.DistributedRequestProcessorClient.process(DistributedRequestProcessorClient.java:115)
at com.hyperion.atf.services.distributed.clientproxies.NamingServiceProxy.getRootEntry(NamingServiceProxy.java:999)
... 13 more
Caused by: java.net.UnknownHostException: server_name
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:466)
... 15 more
[ERROR] UserSessionContainer - -java.lang.IllegalStateException: Root entry is null
[ERROR] UserSessionContainer - -Could not destroy container instance properly "com.hyperion.atf.internal.services.naming.NamingServiceProxy". <java.lang.NullPointerException>java.lang.NullPointerException
at com.hyperion.atf.internal.services.containers.UserSessionContainer.destroy(UserSessionContainer.java:336)
at com.hyperion.atf.internal.services.containers.UserSessionContainer.initialize(UserSessionContainer.java:127)
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:526)
at com.hyperion.atf.services.ServiceManager.getService(ServiceManager.java:271)
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:503)
at com.hyperion.atf.services.ServiceManager.initServiceContainer(ServiceManager.java:463)
at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:661)
at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
[ERROR] ServiceManager - --------------------------
[ERROR] ServiceManager - -Service "naming" was not initialized. Removed from registry.
[ERROR] ServiceManager - -java.lang.IllegalStateException: Could not initalize container for: ServiceRegistration (name=naming, scope=user_session, priority=99, class=com.hyperion.atf.internal.services.naming.NamingServiceProxy, cronned=null)
[ERROR] ServiceManager - --------------------------
[INFO] SessionScopeBindingToJVM - -Releasing services for session: INITIALIZATION
[WARN] SecurityContextManagerProxy - -Could not verify login...will try again. <org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.>org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.atf.services.distributed.clientproxies.SecurityContextManagerProxy.hasValidSecurityContext(SecurityContextManagerProxy.java:286)
at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.refresh(SecurityContextManagerProxy.java:73)
at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.hasValidSecurityContext(SecurityContextManagerProxy.java:162)
at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.getUser(SecurityContextManagerProxy.java:149)
at com.hyperion.atf.security.authentication.SecurityContextManagerProxy.toString(SecurityContextManagerProxy.java:195)
at java.lang.String.valueOf(Unknown Source)
at java.lang.StringBuffer.append(Unknown Source)
at com.hyperion.atf.internal.services.containers.UserSessionContainer.internalRelease(UserSessionContainer.java:259)
at com.hyperion.atf.internal.services.containers.UserSessionContainer.release(UserSessionContainer.java:219)
at com.hyperion.atf.internal.services.containers.UserSessionContainer.release(UserSessionContainer.java:229)
at com.hyperion.atf.services.ServiceManager.releaseServices(ServiceManager.java:354)
at com.hyperion.atf.services.SessionScopeBindingToJVM.destroy(SessionScopeBindingToJVM.java:34)
at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:682)
at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:480)
at com.hyperion.atf.services.distributed.DistributedRequestProcessorClient.process(DistributedRequestProcessorClient.java:115)
at com.hyperion.atf.services.distributed.clientproxies.SecurityContextManagerProxy.hasValidSecurityContext(SecurityContextManagerProxy.java:277)
... 17 more
Caused by: java.net.UnknownHostException: server_name
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:466)
... 19 more
[ERROR] HYABaseClient - -Error while initializing ATF <com.hyperion.atf.services.InitializationException: Could not initialize service manager: 1224512931093>com.hyperion.atf.services.InitializationException: Could not initialize service manager: 1224512931093
at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:678)
at com.hyperion.atf.services.ServiceRegistry.initialize(ServiceRegistry.java:126)
at com.hyperion.analyzer.usersession_base.HYABaseClient.initATF(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.atf.services.ServiceManager$ServiceRecursiveInitException: Could not start critical service: "appinit.tasks", all services are being rolled back.
at com.hyperion.atf.services.ServiceManager.setServiceContainer(ServiceManager.java:546)
at com.hyperion.atf.services.ServiceManager.initServiceContainer(ServiceManager.java:463)
at com.hyperion.atf.services.ServiceManager.initialize(ServiceManager.java:661)
... 5 more
org.apache.commons.lang.exception.NestableRuntimeException: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.analyzer.atf.service.clientproxies.HYALicensingServiceProxy.isFeatureEnabled(Unknown Source)
at com.hyperion.analyzer.usersession_base.AnalyzerClient.initShowHideParams(Unknown Source)
at com.hyperion.analyzer.usersession_base.AnalyzerClient.createGUI(Unknown Source)
at com.hyperion.analyzer.usersession_base.HYABaseClient.init(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: org.apache.commons.lang.exception.NestableException: An error occurred during network communications.
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:480)
at com.hyperion.atf.services.distributed.DistributedRequestProcessorClient.process(DistributedRequestProcessorClient.java:115)
... 6 more
Caused by: java.net.UnknownHostException: server_name
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(Unknown Source)
at org.apache.commons.httpclient.HttpConnection.open(Unknown Source)
at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(Unknown Source)
at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at org.apache.commons.httpclient.HttpClient.executeMethod(Unknown Source)
at com.hyperion.atf.services.distributed.http.HttpRequestProcessor.internalProcess(HttpRequestProcessor.java:466)
... 7 more
Any help will be appreciated! -
Dear all,
I have a big problem with my hyper-v server and network card. I've found a lot of topic around this question but none of them helped me.
I have a Win 2008 R2 Server with only Hyper-V installed. I have 3 NIC , one is reserved to the host management and the others two are reserved for virtual machine .
All NIC are Intel, one is integrated on the Intel motherboard and the others are Intel Gigabit ET Dual port .
Before installing the role of Hyper-V all NIC worked perfectly with speed around 1Gb (file transfer average 90 MB/Sec, of course I have a Gigabit LAN) .
After Hyper-V install, the host system is going very slow and the network file transfer using the dedicated NIC is about ten time slower (9-10MB /sec) . Same problem with all VM off and also if I remove all VM !
I tried all of suggestion found in old post (disabling TCP checksum / offload ...) but nothing happens.
What is really strange is that by removing all network card all the Host operating system seems to improve the speed... but, of course, I can't use my LAN :(
I need help because every night I must make a full backup of Virtual hard disk from the host to a backup server in my lan.
My configuration:
- Server Win 2008 R2 SP1 with Hyper-V and no others role
- 2 Virtual Machine (one Win 2008 R2 and one Win 7 Ultimate)
- NAS Linux (access via SMB with no problem)
- Various Windows 7 Pro client
Thanks in advance to everybody,
Luca M.I disabled the VMQ on the configuration of the HV physical machine, a LACP with 2 NICs, so i disabled on both.
Before, i tried to disable VMQ on the Multiplex adapter (connected to the vswitch and dind´t worked
The ping times drop form 200ms to 6ms, normal in my environment
Before and after:
PS C:\Users\Administrator> Get-NetAdapter -Physical | Get-NetAdapterAdvancedProperty | Where-Object "DisplayName" -Like "*queue*"
Name DisplayName DisplayValue RegistryKeyword RegistryValue
SLOT 1 Port 2 Maximum Number of RSS Queues RSS 4 Queues *NumRssQueues {4}
SLOT 1 Port 2 Virtual Machine Queues Enabled *VMQ {1}
SLOT 1 Port 4 Maximum Number of RSS Queues RSS 4 Queues *NumRssQueues {4}
SLOT 1 Port 4 Virtual Machine Queues Enabled *VMQ {1}
SLOT 1 Port 1 Maximum Number of RSS Queues RSS 4 Queues *NumRssQueues {4}
SLOT 1 Port 1 Virtual Machine Queues Enabled *VMQ {1}
SLOT 1 Port 3 Maximum Number of RSS Queues RSS 4 Queues *NumRssQueues {4}
SLOT 1 Port 3 Virtual Machine Queues Enabled *VMQ {1}
PS C:\Users\Administrator> Get-NetAdapter -Physical | Get-NetAdapterAdvancedProperty | Where-Object "DisplayName" -Like "*queue*"
Name DisplayName DisplayValue RegistryKeyword RegistryValue
SLOT 1 Port 2 Maximum Number of RSS Queues RSS 4 Queues *NumRssQueues {4}
SLOT 1 Port 2 Virtual Machine Queues Disabled *VMQ {0}
SLOT 1 Port 1 Maximum Number of RSS Queues RSS 4 Queues *NumRssQueues {4}
SLOT 1 Port 1 Virtual Machine Queues Enabled *VMQ {1}
SLOT 1 Port 3 Maximum Number of RSS Queues RSS 4 Queues *NumRssQueues {4}
SLOT 1 Port 3 Virtual Machine Queues Enabled *VMQ {1}
SLOT 1 Port 4 Maximum Number of RSS Queues RSS 4 Queues *NumRssQueues {4}
SLOT 1 Port 4 Virtual Machine Queues Disabled *VMQ {0}
PS C:\Users\Administrator> Get-NetLbfoTeam
Name : TeamMGMT
Members : {SLOT 1 Port 1, SLOT 1 Port 3}
TeamNics : TeamMGMT
TeamingMode : Lacp
LoadBalancingAlgorithm : TransportPorts
Status : Up
Name : TeamVM
Members : {SLOT 1 Port 4, SLOT 1 Port 2}
TeamNics : TeamVM
TeamingMode : Lacp
LoadBalancingAlgorithm : HyperVPort
Status : Up -
For our planning forms we use to have a Calc Script run on save - since we did not yet use business rules we would specificy all children of a certain member in the calc script so it would run multiple members thorugh the calc script. We thought BR would save our lives as we could pass just that one child through the calc script on save and have it calc just the one child with the use of a business rule with run time prompt variable of the member of form. This does indeed work, but the calc script takes 30 seconds to calc ALL children and the BR takes 56 seconds to calc just the one child. Are business rules typically a lot slower? If so, is it the passing of the variable? Is there anyway to improve performance on them? Any feedback would be great! Thanks!
Hi,
BR are essentially calc scripts, which are sent to Essbase server. Although, you can expect some delay due to web interface, the delay should not be very significant.
I think you should start by looking at the way your BR is written. Just copy the calc script to the BR and make the 1 member change to pick up parameter.
Let me know if it is still very slow.
Cheers,
RS -
2.4GHZ clients very slow speeds with AP3600
5508 WLC (7.5.102)
AP36021
We currently have a test WiFi SSID setup that uses basic mac filtering on our WLC's
WLAN is configured with WPA and WPA2 L2 Security with WPA Policy and WPA2 Encryption.
For some reason we seem to be getting very slow speeds on clients with 2.4GHZ
for example speedtest.net I get 70mg upload and 65mg download on 5GHZ devices and about 1-3mg download and 1mg upload for 2.4GZ devices!
AP36021 are dual band with 4 channels (2 x 2.4Ghz and 2 x 5Ghz)
fyi - There are no dropped packets on the client stats via Prime mgmt that use 2.4GHZ
Any ideas here?Foreign Primary WLC (let me know if you need the Anchor controller ouput as well)
We have 3 ports configured as 0/12 trunked
interface GigabitEthernet0/12
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
load-interval 30
no cdp enable
channel-group 3 mode on
spanning-tree portfast
end
Building configuration...
Current configuration : 330 bytes
interface Port-channel3
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
logging event trunk-status
logging event bundle-status
load-interval 30
end
AP switch port config
Building configuration...
Current configuration : 617 bytes
interface GigabitEthernet4/32
description AP36021
switchport
switchport access vlan 30
switchport mode access
switchport voice vlan 20
load-interval 30
speed auto 10 100
wrr-queue bandwidth 5 90 5
wrr-queue queue-limit 5 80 5
wrr-queue random-detect min-threshold 2 70 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
wrr-queue cos-map 2 1 0 1 2 4
wrr-queue cos-map 3 1 3 6 7
no snmp trap link-status
mls qos trust cos
no mdix auto
spanning-tree portfast
end
show wlan 4
WLAN Identifier.................................. 4
Profile Name..................................... WLKPV
Network Name (SSID).............................. WLKPV
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
--More-- or (q)uit
Number of Active Clients......................... 21
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 7200 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... hellotest
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ new-byod
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
PMIPv6 MAG Profile........................... Unconfigured
PMIPv6 Default Realm......................... Unconfigured
--More-- or (q)uit
PMIPv6 NAI Type.............................. Hexadecimal
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
--More-- or (q)uit
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
--More-- or (q)uit
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
--More-- or (q)uit
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
--More-- or (q)uit
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
4 10.x.x.x Up
4 10.x.x.x Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled -
After updating to 10.6.8 internet browsing very slow
After doing the update 10.6.8 internet browsing became very slow on safari, chorme and firefox. Is there a solution to this problem.
Had the same problem
I then added some DNS servers to my network configuration and now speed is back to normal (pre 10.6.8)
This is how to add DNS servers
Find some IP address of a DNS server either from your Internet Provider or use one or more of these:
http://theos.in/windows-xp/free-fast-public-dns-server-list/
Test one or more DNS IP addresses by using nslookup
Open terminal (cmd + space type terminal)
In the terminal type
nslookup nasa.org 12.13.14.15
where 12.13.14.15 is the DNS IP server address you want to test
If it works it will respond:
Server: 192.168.1.1
Address: 192.168.1.1#53
Name: nasa.org
Address: 208.73.210.48
Now add one or more valid DNS IP address to the network settings:
In Systems settings / Network / Advanced choose the DNS tab
Press the + button and type the IP address of a valid DNS server
Press OK and then Apply
Now your browser should be back to its usual speed :-) -
Obiee 11g multidimensional cubes are very slow
Hi,
I've noticed that navigation in multidimensional cubes by obiee11g is very very slow, above all in comparison with the microsoft excel plugin.
I've Essbase 11.1.3 (I hope to remind well) and obiee 11.1.1.3.0.
Someone have the same problem?
ThanksHI Andy ,
Observer the similar kind of performance problem in OBIEE 11g with Oracle Cube build using AWM 11g version .
The same cube access using OBIEE 10g repository is very fast .
I have seen one of my 10g report coming within 30 secs where in 11g it is even hard to come on before 5 minutes .
Just have seen in SR that there are inherent problem of OBIEE 11.1.1.5 version regarding the performance and Oracle asked to apply couple of patch to fix the behavior .
Regards,
DxP -
Indesign image display is very slow and jerky
good morning
I contacted Adobe Customer Service in Italy because I have big problems with the Creative Suite CS 5.5, in particular with Indesign and in general with the display of images of AI and Acrobat.
As I work with Indesign image display is very slow and jerky. Even with AI and Acrobat work experience is not good, the images are jerky and there are hesitations in the fluidity of view.
The software is installed on windows 7 64bit Utlimate, the workstation is very powerful: Supermicro motherboard, dual Xeon E5620 2.4ghz, 16gb ram, SSD OCZ vertex4, PNY Nvidia Quadro 4000.
The customer service has sent me several tips for email, I have followed all the instructions but I did not get results. In conclusion, when I pointed out that reading on the forums I was not the only one who showed this problem and after discussing about my hardware configuration, they told me that the problem is probably due to the fact that I have two Xeon processors!
In efects had observed that CS 5.5 on my notebook works better, but I never thought about having problems because the PC is powerful. I checked the CPU and GPU when using Indesign and I could see that uses a single CPU, and most "only 1 core"! But of CPUs in the system there are two for a total of 8 cores. Indesign seems to use only 1/8 of the available computing power ... In addition, practically does not use the GPU (only 10-15%).
From the customer service was suggested to disable or remove a processor from the system. All this seems to me incredible. I use the workstation for applications that can take advantage of the power of the machine, should I remove the processor whenever I have to use CS 5.5? If things are this way I'm thinking of asking if Adobe buy me a PC with a single processor only for use with CS 5.5 ...
Thank you.Interesting idea, I'll investigate in this direction, I should try to make a mirror of the ssd on a traditional hard drive, exchange them and see if the situation changes. It must, however, be a further factor in the eventual bad combination hardware ... on my laptop I have: windows 7 x64, intel core i7 processor, 16gb of ram, nvidia quadro 3000m, and .... a ssd ocz agility 3, but indesign is more responsive.
But why indesign should be influenced by the hard-drive? With 16gb of ram and working files on NAS because in design interacts with the hard drive? -
Time Machine Very Slow (321 Days) Please Help!
Hi all, I've got a 2012 MBP and have had problems with TM since day one.
I'm running all the latest software with a brand new Time Capsule and it states that it will take over 300 days to back up.
I originally used a NAS and TM was very very slow along with having to reformat and start again every few weeks so I gave in and got a TC thinking it would solve my problems but it's returned again.
I've tried reformatting, disabling spotlight, wired and wireless connections, different hard drives and still the problem persists. Occasionally it also fails to find the backup disk so I have to reformat and start again.
It's driving me absolutely insane because despite messing and messing, trying different solutions the problem always seems to return at random. It will work great for a week or 2 then it's back to square one.
Can someone please restore my sanity and help?To update, I got up this morning and it was still stating some 22 days after copying a few gb in 18 hours so I restarted (again). TM then stated it couldn't find the back up disk so I again pointed it to the right disk and it now appears to be stuck again after doing over a gb in a minute or two.
Here's the info requested.
31/01/2013 09:53:34.380 com.apple.backupd[398]: Starting manual backup
31/01/2013 09:53:46.000 kernel[0]: nfs server localhost:/jiWSkBZ-Y-Uq-EgHJVYVPN: not responding
31/01/2013 09:53:47.000 kernel[0]: nfs server localhost:/jiWSkBZ-Y-Uq-EgHJVYVPN: can not connect, error 61
31/01/2013 09:54:16.262 KernelEventAgent[46]: tid 00000000 received event(s) VQ_DEAD (32)
31/01/2013 09:54:16.263 KernelEventAgent[46]: tid 00000000 type 'mtmfs', mounted on '/Volumes/MobileBackups', from 'localhost:/jiWSkBZ-Y-Uq-EgHJVYVPN', dead
31/01/2013 09:54:16.000 kernel[0]: nfs server localhost:/jiWSkBZ-Y-Uq-EgHJVYVPN: dead
31/01/2013 09:54:16.263 KernelEventAgent[46]: tid 00000000 force unmount localhost:/jiWSkBZ-Y-Uq-EgHJVYVPN from /Volumes/MobileBackups
31/01/2013 09:54:16.263 KernelEventAgent[46]: tid 00000000 found 1 filesystem(s) with problem(s)
31/01/2013 09:54:22.198 com.apple.backupd[398]: Failed to get NSURLVolumeURLForRemountingKey for /Volumes/MobileBackups, error: Error Domain=NSCocoaErrorDomain Code=4 "The file “MobileBackups” doesn’t exist." UserInfo=0x7f9934a04da0 {NSURL=file://localhost/Volumes/MobileBackups/, NSFilePath=/Volumes/MobileBackups}
31/01/2013 09:54:22.198 com.apple.backupd[398]: Attempting to mount network destination URL: afp://Dave%[email protected]/AirPort%20Disk
31/01/2013 09:54:23.036 com.apple.backupd[398]: Mounted network destination at mount point: /Volumes/AirPort Disk using URL: afp://Dave%[email protected]/AirPort%20Disk
31/01/2013 09:54:23.000 kernel[0]: ASP_TCP asp_tcp_usr_control: invalid kernelUseCount 0
31/01/2013 09:54:23.000 kernel[0]: AFP_VFS afpfs_mount: /Volumes/AirPort Disk, pid 435
31/01/2013 09:54:23.000 kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff80946e1008 /Volumes/AirPort Disk (error = 0, retval = 0)
31/01/2013 09:54:48.061 mdworker[434]: Unable to talk to lsboxd
31/01/2013 09:54:48.000 kernel[0]: Sandbox: sandboxd(442) deny mach-lookup com.apple.coresymbolicationd
31/01/2013 09:54:51.281 sandboxd[442]: ([434]) mdworker(434) deny mach-lookup com.apple.ls.boxd
31/01/2013 09:54:51.000 kernel[0]: nspace-handler-set-snapshot-time: 1359626093
31/01/2013 09:55:28.923 mds[40]: (Error) Volume: Root store set to FSOnly with matching create! (loaded:1)
31/01/2013 09:55:29.892 com.apple.backupd[398]: Disk image /Volumes/AirPort Disk/Dave’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
31/01/2013 09:55:29.937 com.apple.backupd[398]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
31/01/2013 09:55:30.908 com.apple.backupd[398]: Forcing deep traversal on source: "Macintosh HD" (mount: '/' fsUUID: 74A87C50-39EA-3B75-AACA-0647768C78F6 eventDBUUID: 539B3BBD-544C-444D-9C2C-14001A19F631)
31/01/2013 09:55:32.032 com.apple.backupd[398]: Didn't get valid migration dates.
31/01/2013 09:55:32.040 com.apple.backupd[398]: Found 806587 files (286.4 GB) needing backup
31/01/2013 09:55:32.041 com.apple.backupd[398]: 343.68 GB required (including padding), 1.99 TB available
31/01/2013 09:56:15.000 kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
31/01/2013 09:56:15.000 kernel[0]: macx_swapon SUCCESS
31/01/2013 09:56:43.954 com.apple.usbmuxd[27]: _handle_timer heartbeat detected detach for device 0x1b-192.168.0.13:0!
31/01/2013 09:56:51.626 mdworker[488]: Unable to talk to lsboxd
31/01/2013 09:56:51.746 sandboxd[489]: ([488]) mdworker(488) deny mach-lookup com.apple.ls.boxd
31/01/2013 09:56:52.000 kernel[0]: Sandbox: sandboxd(489) deny mach-lookup com.apple.coresymbolicationd
31/01/2013 09:57:06.212 CVMServer[83]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
31/01/2013 09:57:06.406 launchctl[493]: launchctl: Dubious ownership on file (skipping): /Library/LaunchAgents/com.davdaerve.UpdatePodcastsAgent.plist
31/01/2013 09:57:07.174 CVMServer[83]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
31/01/2013 09:57:14.580 Folder Sync[495]: Growl.framework loaded
31/01/2013 09:57:14.645 Folder Sync[495]: Using existing log dir: /Users/davedaerve/Library/com.destek.foldersync
31/01/2013 09:57:20.128 Folder Sync[495]: Scheduler: Run Check for 9:57
31/01/2013 09:57:26.027 mDNSResponder[41]: ERROR: handle_resolve_request bad interfaceIndex 1
31/01/2013 09:57:26.129 mDNSResponder[41]: ERROR: handle_resolve_request bad interfaceIndex 15
31/01/2013 09:57:26.258 mDNSResponderHelper[497]: do_mDNSSendWakeupPacket write failed Device not configured
31/01/2013 09:57:26.259 mDNSResponderHelper[497]: do_mDNSSendWakeupPacket write failed Device not configured
31/01/2013 09:57:26.261 mDNSResponder[41]: ERROR: handle_resolve_request bad interfaceIndex 16
31/01/2013 09:57:26.285 mDNSResponder[41]: ERROR: handle_resolve_request bad interfaceIndex 24
31/01/2013 09:57:27.132 mDNSResponderHelper[497]: do_mDNSSendWakeupPacket write failed Device not configured
31/01/2013 09:57:37.838 iTunes[496]: AVF KeyExchange Version from driver for Certificates 1
31/01/2013 09:57:46.991 Twitter[498]: font ChicagoBold loaded
31/01/2013 09:57:47.054 Twitter[498]: font pixChicago loaded
31/01/2013 09:57:48.244 Twitter[498]: could not fetch oAuthTokenSecret, this account will get removed
31/01/2013 09:57:51.623 Mail[499]: Using V2 Layout
31/01/2013 09:57:52.921 com.apple.SecurityServer[16]: Session 100012 created
31/01/2013 09:57:56.499 com.apple.launchd[1]: (com.apple.qtkitserver[258]) Exited: Killed: 9
31/01/2013 09:57:56.000 kernel[0]: memorystatus_thread: idle exiting pid 258 [com.apple.qtkits]
31/01/2013 09:57:57.000 kernel[0]: memorystatus_thread: idle exiting pid 242 [cfprefsd]
31/01/2013 09:57:58.338 librariand[500]: MMe quota status changed: under quota
31/01/2013 09:57:58.350 com.apple.usbmuxd[27]: _handle_timer heartbeat detected detach for device 0x1c-192.168.0.6:0!
31/01/2013 09:57:58.998 com.apple.usbmuxd[27]: _handle_timer heartbeat detected detach for device 0x1d-192.168.0.5:0!
31/01/2013 09:57:59.088 Mail[499]: *** -[IADomainCache init]: IA domains cache is out of date.
31/01/2013 09:58:00.137 Folder Sync[495]: Scheduler: Run Check for 9:58
31/01/2013 09:58:00.147 com.apple.launchd.peruser.501[141]: ([0x0-0x14014].com.apple.inputmethod.ironwood[223]) Exited: Killed: 9
31/01/2013 09:58:00.000 kernel[0]: memorystatus_thread: idle exiting pid 223 [DictationIM]
31/01/2013 09:58:19.718 Mail[499]: Couldn't contact spell checker for Multilingual
31/01/2013 09:58:48.777 com.apple.launchd[1]: (com.apple.iCloudHelper[232]) Exited: Killed: 9
31/01/2013 09:58:48.000 kernel[0]: memorystatus_thread: idle exiting pid 232 [com.apple.iCloud]
31/01/2013 09:58:49.895 com.apple.launchd.peruser.501[141]: (com.apple.tccd[213]) Exited: Killed: 9
31/01/2013 09:58:49.000 kernel[0]: memorystatus_thread: idle exiting pid 213 [tccd]
31/01/2013 09:58:49.937 WindowServer[106]: CGXRegisterWindowWithSystemStatusBar: window b already registered
31/01/2013 09:58:50.000 kernel[0]: memorystatus_thread: idle exiting pid 211 [xpcd]
31/01/2013 09:58:50.453 com.apple.launchd[1]: (com.apple.xpcd.F5010000-0000-0000-0000-000000000000[211]) Exited: Killed: 9
31/01/2013 09:58:54.351 com.apple.launchd.peruser.0[278]: (com.apple.distnoted.xpc.agent[300]) Exited: Killed: 9
31/01/2013 09:58:54.000 kernel[0]: memorystatus_thread: idle exiting pid 300 [distnoted]
31/01/2013 09:58:54.000 kernel[0]: memorystatus_thread: idle exiting pid 240 [distnoted]
31/01/2013 09:58:54.920 com.apple.launchd.peruser.501[141]: (com.apple.accountsd[210]) Exited: Killed: 9
31/01/2013 09:58:55.000 kernel[0]: memorystatus_thread: idle exiting pid 210 [accountsd]
31/01/2013 09:58:55.559 com.apple.launchd.peruser.501[141]: (com.apple.CalendarAgent[187]) Exited: Killed: 9
31/01/2013 09:58:55.000 kernel[0]: memorystatus_thread: idle exiting pid 187 [CalendarAgent]
31/01/2013 09:58:58.000 kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
31/01/2013 09:58:58.000 kernel[0]: macx_swapon SUCCESS
31/01/2013 09:59:00.149 Folder Sync[495]: Scheduler: Run Check for 9:59
31/01/2013 09:59:06.000 kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
31/01/2013 09:59:06.000 kernel[0]: macx_swapon SUCCESS
31/01/2013 09:59:08.759 launchctl[512]: launchctl: Dubious ownership on file (skipping): /Library/LaunchAgents/com.davdaerve.UpdatePodcastsAgent.plist
31/01/2013 10:00:00.158 Folder Sync[495]: Scheduler: Run Check for 10:00
31/01/2013 10:00:01.180 launchctl[525]: launchctl: Dubious ownership on file (skipping): /Library/LaunchAgents/com.davdaerve.UpdatePodcastsAgent.plist
31/01/2013 10:00:09.000 kernel[0]: memorystatus_thread: idle exiting pid 515 [cfprefsd]
31/01/2013 10:00:33.665 mdworker[639]: Unable to talk to lsboxd
31/01/2013 10:00:34.000 kernel[0]: Sandbox: sandboxd(640) deny mach-lookup com.apple.coresymbolicationd
31/01/2013 10:00:34.311 sandboxd[640]: ([639]) mdworker(639) deny mach-lookup com.apple.ls.boxd
31/01/2013 10:01:00.171 Folder Sync[495]: Scheduler: Run Check for 10:01
31/01/2013 10:01:10.060 Folder Sync[495]: objc[495]: Object 0x10bc05ab0 of class NSUserDefaults autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
31/01/2013 10:01:14.200 com.apple.launchd.peruser.501[141]: (com.apple.tccd[647]) Exited: Killed: 9
31/01/2013 10:01:14.000 kernel[0]: memorystatus_thread: idle exiting pid 647 [tccd]
31/01/2013 10:01:31.206 lsboxd[228]: @AE relay 4755524c:4755524c
31/01/2013 10:01:31.502 WindowServer[106]: CGXRegisterWindowWithSystemStatusBar: window b already registered
31/01/2013 10:01:57.362 CalendarAgent[660]: *** -[IADomainCache init]: IA domains cache is out of date.
31/01/2013 10:02:00.182 Folder Sync[495]: Scheduler: Run Check for 10:02
31/01/2013 10:02:14.579 CalendarAgent[660]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=503 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 503.)" UserInfo=0x7fc9524481d0 {AccountName=Yahoo!, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7fc9520cc0c0 [0x10aa25fd0]>{type = immutable dict, count = 11,
entries =>
0 : Case Insensitive Key: Connection = <CFString 0x7fc9520b7470 [0x10aa25fd0]>{contents = "keep-alive"}
1 : Case Insensitive Key: Content-Type = <CFString 0x7fc9520bc410 [0x10aa25fd0]>{contents = "text/html; charset=UTF-8"}
2 : Case Insensitive Key: Retry-After = <CFString 0x7fc952086140 [0x10aa25fd0]>{contents = "3600"}
3 : Case Insensitive Key: Via = <CFString 0x7fc9520cb850 [0x10aa25fd0]>{contents = "HTTP/1.1 calgate003.cal.ac4.yahoo.com (YahooTrafficServer/1.19.11 [c s f ])"}
4 : Case Insensitive Key: Age = <CFString 0x10a9fa110 [0x10aa25fd0]>{contents = "0"}
5 : Case Insensitive Key: P3P = <CFString 0x7fc952086050 [0x10aa25fd0]>{contents = "policyref="http://info.yahoo.com/w3c/p3p.xml", CP="CAO DSP COR CUR ADM DEV TAI PSA PSD IVAi IVDi CONi TELo OTPi OUR DELi SAMi OTRi UNRi PUBi IND PHY ONL UNI PUR FIN COM NAV INT DEM CNT STA POL HEA PRE LOC GOV""}
6 : Case Insensitive Key: Date = <CFString 0x7fc95209e440 [0x10aa25fd0]>{contents = "Thu, 31 Jan 2013 10:02:14 GMT"}
7 : Case Insensitive Key: Server = <CFString 0x7fc9520b7490 [0x10aa25fd0]>{contents = "YTS/1.19.11"}
8 : Case Insensitive Key: Transfer-Encoding = <CFString 0x10bf826f8 [0x10aa25fd0]>{contents = "Identity"}
11 : Case Insensitive Key: Cache-Control = <CFString 0x7fc9520cff40 [0x10aa25fd0]>{contents = "private"}
12 : Case Insensitive Key: Vary = <CFString 0x7fc9520b67f0 [0x10aa25fd0]>{contents = "Accept-Encoding"}
31/01/2013 10:03:00.193 Folder Sync[495]: Scheduler: Run Check for 10:03
31/01/2013 10:03:23.921 iTunes[496]: _NotificationSocketReadCallbackGCD (thread 0x10717e180): Unexpected connection closure...
31/01/2013 10:03:23.923 ath[665]: _NotificationSocketReadCallbackGCD (thread 0x101b21180): Unexpected connection closure...
31/01/2013 10:03:25.439 mds[40]: (Warning) FMW: event:1 had an arg mismatch. ac:2 am:51
31/01/2013 10:03:29.551 com.apple.launchd.peruser.501[141]: (com.apple.CalendarAgent[660]) Exited: Killed: 9
31/01/2013 10:03:29.000 kernel[0]: memorystatus_thread: idle exiting pid 660 [CalendarAgent]
31/01/2013 10:03:45.425 iTunes[496]: _NotificationSocketReadCallbackGCD (thread 0x10717e180): Unexpected connection closure...
31/01/2013 10:03:45.427 ath[665]: _NotificationSocketReadCallbackGCD (thread 0x101b21180): Unexpected connection closure...
31/01/2013 10:04:00.203 Folder Sync[495]: Scheduler: Run Check for 10:04
31/01/2013 10:04:13.627 CalendarAgent[673]: *** -[IADomainCache init]: IA domains cache is out of date.
31/01/2013 10:04:16.750 Twitter[498]: will terminate
31/01/2013 10:04:16.789 Twitter[498]: Error: no oAuthTokenSecret set for account
31/01/2013 10:04:23.078 CalendarAgent[673]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fca11285a50 {AccountName=Yahoo!, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7fca1160a910 [0x10f5b6fd0]>{type = immutable dict, count = 11,
entries =>
0 : Case Insensitive Key: Connection = <CFString 0x7fca13581410 [0x10f5b6fd0]>{contents = "keep-alive"}
1 : Case Insensitive Key: Content-Type = <CFString 0x7fca11607420 [0x10f5b6fd0]>{contents = "text/html; charset=UTF-8"}
2 : Case Insensitive Key: Server = <CFString 0x7fca11607450 [0x10f5b6fd0]>{contents = "YTS/1.19.11"}
3 : Case Insensitive Key: Via = <CFString 0x7fca1160a8b0 [0x10f5b6fd0]>{contents = "HTTP/1.1 calgate007.cal.ac4.yahoo.com (YahooTrafficServer/1.19.11 [c s f ])"}
4 : Case Insensitive Key: Age = <CFString 0x10f58b110 [0x10f5b6fd0]>{contents = "0"}
5 : Case Insensitive Key: P3P = <CFString 0x7fca11610b00 [0x10f5b6fd0]>{contents = "policyref="http://info.yahoo.com/w3c/p3p.xml", CP="CAO DSP COR CUR ADM DEV TAI PSA PSD IVAi IVDi CONi TELo OTPi OUR DELi SAMi OTRi UNRi PUBi IND PHY ONL UNI PUR FIN COM NAV INT DEM CNT STA POL HEA PRE LOC GOV""}
6 : Case Insensitive Key: Date = <CFString 0x7fca135f2890 [0x10f5b6fd0]>{contents = "Thu, 31 Jan 2013 10:04:22 GMT"}
7 : Case Insensitive Key: Transfer-Encoding = <CFString 0x110b206f8 [0x10f5b6fd0]>{contents = "Identity"}
9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7fca135f28c0 [0x10f5b6fd0]>{contents = "Basic realm="Zimbra""}
11 : Case Insensitive Key: Cache-Control = <CFString 0x7fca116d2810 [0x10f5b6fd0]>{contents = "private"}
12 : Case Insensitive Key: Vary = <CFString 0x7fca135f28f0 [0x10f5b6fd0]>{contents = "Accept-Encoding"}
31/01/2013 10:04:27.512 iTunes[496]: _NotificationSocketReadCallbackGCD (thread 0x10717e180): Unexpected connection closure...
31/01/2013 10:04:27.514 ath[665]: _NotificationSocketReadCallbackGCD (thread 0x101b21180): Unexpected connection closure...
31/01/2013 10:04:27.851 Dock[156]: trying to take pid 499 out of fullscreen but it is not the current space
31/01/2013 10:04:27.972 Mail[499]: CGSGetWindowTags: Invalid window 0x0
31/01/2013 10:04:27.972 Mail[499]: void _NSMoveWindowToSpaceUnlessSticky(NSInteger, CGSSpaceID): CGSGetWindowTags(cid, win, tags, kCGSRealMaximumTagSize) returned CGError 1000 on line 1247
31/01/2013 10:04:27.977 WindowServer[106]: CGXSetWindowListTags: Invalid window 0
31/01/2013 10:04:33.945 iTunes[496]: 2013-01-31 10:04:33.944722 AM [AVSystemController] Stopping AirPlay
31/01/2013 10:04:34.218 WindowServer[106]: CGXGetConnectionProperty: Invalid connection 82119
31/01/2013 10:04:34.218 WindowServer[106]: CGXGetConnectionProperty: Invalid connection 82119
31/01/2013 10:04:34.219 WindowServer[106]: CGXGetConnectionProperty: Invalid connection 82119
31/01/2013 10:05:07.671 mdworker[671]: Unable to talk to lsboxd
31/01/2013 10:05:08.000 kernel[0]: Sandbox: sandboxd(680) deny mach-lookup com.apple.coresymbolicationd
31/01/2013 10:05:08.457 sandboxd[680]: ([671]) mdworker(671) deny mach-lookup com.apple.ls.boxd
31/01/2013 10:05:21.289 com.apple.SecurityServer[16]: Killing auth hosts
31/01/2013 10:05:21.289 com.apple.SecurityServer[16]: Session 100012 destroyed
31/01/2013 10:09:59.228 WindowServer[106]: CGXRegisterWindowWithSystemStatusBar: window b already registered
31/01/2013 10:10:15.787 mdworker[697]: Unable to talk to lsboxd
31/01/2013 10:10:16.000 kernel[0]: Sandbox: sandboxd(810) deny mach-lookup com.apple.coresymbolicationd
31/01/2013 10:10:16.708 sandboxd[810]: ([697]) mdworker(697) deny mach-lookup com.apple.ls.boxd -
Upgrading to iTunes 9 -- /VERY/ slow now..
So when I "updated" to iTunes 9.0, all of a sudden, it's running excruciatingly slowly for me. When I first installed 9.0, it took about 8 hours to "update my library". Any time that I click on a song to play it, there's a good 10-second beachballing before it plays. Switching to a different song causes the same issue. I didn't have that problem at all in iTunes 8. Always ran smooth as silk.
I rolled back to the latest version of iTunes 8. When iTunes 9.01 was released, I once again "updated" iTunes. Same exact issue.
Currently, I have my iTunes library file stored on my local HDD and my music/videos/etc stored in a shared folder on a NAS. Apparently, other people have had issues with music stored on external drives. I'd done a search and the only real "solution" that I could find was to delete the iTunes preference file. I tried that and it worked.. until I added more music to the library. After more music was added, it was back to the same VERY slow behavior as before.
Is there a more permanent solution to this and I am just not finding it? Is this a known issue that Apple is working on? Going to roll back to iTunes 8 once again.
Thanks in advance for anyone's help.Hi there,
I downgraded to iTunes 8.2 as well and haven't looked back (forward). I saw iTunes 9.0.1 come out but thought I'd wait to hear if it had sorted out any of the problems. But sounds like it hasn't.
iTunes 8.2 was the sweet spot I think. Not only does 9 not work well, but it looks and feels awful too. It's such a shame they've messed up what was a great piece of software. I really hope they address all these issues, but I doubt it. RIP iTunes!
Maybe you are looking for
-
Script is taking long time to finish...Need Optimization Suggestion.
Hi All: I have written below script and this script is successfully executing and deriving the correct results. But this script is taking 4 hours to complete, can you please suggest on how to improve its performance. The requirement is to run this sc
-
I've always used PC and I'm planning on making the transition to Mac. That's why I'm considering buying an iPad. Today I went to Best Buys and the Mac guy told me that it isn't possible to connect the iPad to an Infocus and a remote for ppt presenta
-
Beekeeper display issues in recent firefox versions
We noticed that recent versions of Firefox will cause display problems in beekeeper (like a search field not being displayed). While user facing clients are still supported with current versions in Beehive 2.0.1.x, this is a case where Oracle will no
-
Charging issues- how do I know it's charging?
Just picked up my Droid X today. Turned it off, plugged it in to charge it. All that appears is the motorola symbol, but no battery icon or anything like shows up- then it disappears. So I unplug it, try to turn it on by pressing the power button, an
-
Dear all, I have to develop a BW Implementation Roadmap for a BI Project. Can anyone give me materials about it? For example, Preparation phase: Purpose Task1 Task2 Blueprint Phase: Purpose Task1 Task2 Thank you in advance.