Essbase Client 7.1.2 and Windows Vista

Dear all,
have anyone client 7.1.2 installed at Windows Vista? Is it possible?
Thank you.

Hi,
have you faced any installation problem ?
Yes , its possible .Ensure, while installing
right click on the executable
go to 'compatability'
then select other operating system like 2000 or XP
and run it as a administrator
Sandeep Reddy Enti
HCC

Similar Messages

Oracle 10g XE and Windows Vista

I bought a laptop with an excitement; and installed oracle 10g XE, now I can't run the oracle on this Windows Vista? Any guidance and suggestion would be much appreciated.
I couldn't dare to install linux fedora on this laptop which has Windows Vista for a dual boot sytem because I read all negative things in google about the dual bootying system of fedora and windows vista. Any suggestion and guidance would be one again would be very much appreciated.
[email protected]

I have a problem with Oracle XE installed on my laptop 1GB RAM with Windows Vista :).
It installed ok, but when I run my program (Visual Foxpro 9) it stays 30 seconds up to a minute to make a few selections.
The same program on my laptop works fine with other databases installed on windows xp or windows 2003 server.
Also, from other computers I can connect to Oracle XE on Windows Vista and make those selections fine.
I uninstalled Oracle XE from my laptop.
I downloaded Oracle Database 10g Release 2 (10.2.0.3) Enterprise/Standard Edition for Microsoft Windows Vista and I installed it.
It's the same problem.
On my laptop, my program (VFP9 - connects through ODBC) or PLSQL Developer freeze when I do a select from a table with 72053 rows (the result has 2000 rows).
If I connect from another computer, where I installed Oracle Instant Client from Oracle Database 10g Client Release 2 (10.2.0.3) for Vista, the select runs instantaneously :)
My head hurts very much at this time.
We bought the laptop with Vista OEM for presentations :) - it's unusable at this point :)

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

Is there a fix for the incompatibility between itunes and Windows Vista?

I'm having a problem with itunes and Windows Vista. When I download itunes it disables my dvd drive. I have found a fix for that by deleting some registry items, but when I do that itunes is disabled. Does anyone know of a solution to this problem?

Hey Don,
What exactly happens after you install iTunes? Do you see an error message?
This article describes device filter issues that can be caused by application conflicts:
http://docs.info.apple.com/article.html?artnum=305422
Jason

Is Magic Mouse compatible with PC and Windows Vista

Hello to everyone, I'm a new member of this forum, I hope someone will help me, please.
I'm taking a look at the latest beautiful Apple's product and I felt in love with Magic Mouse, I'd like to have it for ma PC (not a Mac) with OS Vista.
Is there anyboby who knows if this mouse is compatible with a Pc and Windows Vista OS?
Actually I don't have bluetooth thecnology on my pc but if Magic Mouse were compatible I'd buy an usb adaptor.
Thanks to everyone will help e!

I asked a similar question a few hours back and no answers yet. I think nobody knows since nobody has had the chance to test them. If previous releases are any indication, you'll probably get basic functionality because it is bluetooth, but for the advanced features or setting options you'll have to wait for a Windows driver, which can sometimes take a few months or more.
My thread: http://discussions.apple.com/thread.jspa?threadID=2205313

Ipod nano first generation and windows vista

I finally got everything to work right with Itunes and Windows Vista except one minor problem.
On my ipod, the blue "dot" does not show up when a podcast is new, so in a long lists of podcasts, I can't tell which ones I already listened to.
Is there a way to fix this?
Thank you, Debra

I have a new ipod nano and can not download iTunes to Winnows Vista.
Need all the help that i can get. Thanks,
Capt g

Fieldpoint Hardware Drivers that are compatible with LV 8.5 and Windows Vista

I trying to develop in LabVIEW for some Fieldpoint hardware. I was going to download the hardware drivers from NI, but only see drivers that are compatible with Windows XP and LV 8.2
Or, am I just misinterpreting this?
Also, are there any potential conflicts with me developing on Vista, if my end-user, is uding another OS?
Daddy-O
One should welcome adversity as an opportunity to excel.

Hi Daddy-O,
Thank you for contacting National Instruments. This is a little misleading, and unfortunately the driver you are looking for is currently not directly searchable. In order to use your FieldPoint hardware with LabVIEW 8.5 and Windows Vista, you will need the FieldPoint 6.0 driver. This can be found within the disk that is distributed with new FieldPoint hardware, and any Device Drivers CD from August 2007 forward. Unfortunately, a standalone installer is not available for this driver, and if you do not have a hard copy of the Device Drivers, you can download this here. From this installer, you should be able to select FieldPoint 6.0 and install this software.
I hope this helps! Let me know if there is anything else I can clarify. Have a great day!
Jason W.
National Instruments
Applications Engineer

I set up a playlist in itunes and when i tried to sync it to my iphone i get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occured. Using itunes 10.5.2.11 and Windows Vista 64

I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred. Using itunes 10.5.2.11 and Windows Vista 64. Any help? Thanks in advance!

I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

Share filing between Mac and Windows Vista

Hello,
I am trying to file share my iBook and Vista.
On my I book under Finder >>>Network>> I see my computer name "Computer-PC" but the icon is grayed out.
When I click on it it says:
The Alias "Computer-PC" Could not opened, because the original item cannot be found. Then it gives me 3 choices
Delete Alias, Fix Alias , OK
I hit OK it does nothing
I hit Fix Alias, Then it ask me to choose an item to open. I dont know what to open????
I do not want to Delete Alias.
Also I tried to connect Vista and it does see the IBook on the network, but then when I try to connect It asks for the user name and password of my iBook
I verified this by reading the support docs on the Apple website.
System Preference >>>Systems >>>Accounts >> verified and changed password.
Still no luck. Can someone give me some advice? Thanks!!

There are more than a few threads on the topic across the web; so I guess a search
would be in order and some sorting of results to enable a wise choice from them.
There's also the Apple Help built into OS X and some ideas present themselves.
Firewall changes would probably be necessary, and the Sharing (system preference)
panel has some access settings for some of this sort of thing.
(The closest I have been to sharing between a Windows machine and a Mac, is when
I let a few Windows machines mistakenly given to me to troubleshoot & repair, were
brought into my space and they temporarily shared a workbench. I found out what
was wrong with them (outside of the poor quality & shabby OS) -- and out they went!)
•Networking Mac OS X and Windows Vista - google search
http://www.google.com/search?hl=en&q=NetworkingMac+OS+X+and+WindowsVista&btnG=Search
•File Sharing between Mac OS X and Vista - google search
http://www.google.com/search?hl=en&q=FileSharing+between+Mac+OS+X+and+Vista&btnG=GoogleSearch
•Networking Windows Vista and Mac OS X - google search
http://www.google.com/search?hl=en&q=NetworkingWindows+Vista+and+Mac+OSX&btnG=Search
•File Sharing between Windows Vista and Mac OS X
http://www.google.com/search?hl=en&q=FileSharing+between+Windows+Vista+and+Mac+OS+X&btnG=GoogleSearch
edited.

HotSynch Connection gets lost between TE2 and Windows Vista

I'm trying to hotsync (by bluetooth) between my Tungsten E2 and Windows Vista. I got them speaking to each other, but the hotsync starts and never gets past the Calendar. The laptop looks like it's still running, but the TE2 hotsynch log says the connection was lost.
Is there a way to keep them connected long enough to sync?
The TE2 is running Palm OS Garnet v. 5.4.7 and HotSync v. 5.0P
The laptop is running Windows Vista 7 64 bit, HotSync Manager 7.0.2 and Palm Desktop 6.2.2.
Thanks!
Post relates to: Tungsten E2

Oh, yeah, one more thing..the hotsync works fine by USB cable on the desktop PC running Windows XP, so I don't think there's any corrupted databases on the TE2 (because if there was, then the USB cable hotsync wouldn't work)

I'm using photoshop elements 2.0 and window vista. when i want to crop i cannot enter any values in

I'm using photoshop elements 2.0 and window vista. when i want to crop i cannot enter any values in the width and height boxes. the cursor won't enter. same thing with resolution. what did i do? what's wrong?

The first thing you might try is resetting the Crop Tool by right clicking on the crop icon in the tool options bar and choosing Reset Tool.
If that doesn't work then the next thing is to reset the photoshop elements 2 settings file by holding down
the Shift+Ctrl+Alt keys just after clicking or double clicking on the pse 2 shortcut.
Keep holding the keys until a dialog appears ask if you want to delete the photoshop elements settings file
and click yes in the dialog.

Is there an external hard disc that will work with Mac OS10.4.11 and Windows Vista?

Is there an external hard disc that will work with both Mac (OS10.4.11) and Windows (Vista)?

For NTFS on Mac, there are both open-source and commercial solutions. See:
http://www.macupdate.com/find/mac/NTFS
For HFS+ Drivers for Windows, there is only one:
http://www.mediafour.com/products/macdrive
Regards.

Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2?

Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2? Earlier when checking for updates there were compatibility issues. Were these issues resolved to allow me secure operation with Firefox 4.0?

I also am a zone alarm user and was not to happy about the issue with 4.0
I use sky .fm for music and was not happy when it would not play. required update to latest flash,which didn't work no matter what. even the suggestion in another thread.

JRE v 1.6.0_21 on Windows XP and Windows Vista

I run an applet on JRE v 1.6.0_21 on Windows XP and Windows Vista, and it behaves differently on these 2 platforms. There is a servlet that sends date information using java.sql.date and the applet that receives these dates casts the date into java.util.date. (That can be corrected, and I just want to know if there are others who might be experiencing this behavior.)
On Windows XP with Internet Explorer v7, the date is displayed correctly by the applet. With Vista and Internet Explorer v7, the date displayed is one day before. My theory is in Vista the date with 0000 timestamp is considered the day before, while in XP a date with timestamp (all zeroes) is displayed as that date. When does a new day start - is it exactly at break of midnight, or a split second later? Seems like one would get 2 different answers from Vista and XP. Any thoughts? Thanks.

Appears to me like this issue is related to:
http://forums.sun.com/thread.jspa?threadID=5353667
My Windows XP box shows timezone = America/New_York while my Windows Vista shows timezone = GMT-05:00 with 'Automatically adjust clock for DST' already checked. Should be the same right? Possible that JRE is not reading the adjust clock for DST setting?
On Vista, when I set -Duser.timezone=America/New_York for the JRE settings in Java Control Panel, the applet behaves as I expected. Thanks.

Photoshop CS6 upgrade and Windows Vista

I own Photoshop CS5 and Windows Vista Home Premium 32-bit platform. Can I upgrade to CS6 ? Your upgrade ad and recent published info says that only platforms using Windows XP or Windows 7 are upgradable. What happened to Windows Vista ?

It works on Vista, even if it is not officialyl supported. Just be prepared that things like OpenGL support, tablet drivers etc. may act funny and some features may not work at all.
Mylenium

Essbase Client 7.1.2 and Windows Vista

Similar Messages

Maybe you are looking for