Essbase component is not showing up in config utility after FR Config
Hi All,
I have succesfully installed and confgiured essbase on 11.1.2.2 version. My OS is AX 6.1 OS and DB is db2 9.7. Today when I installed and configured FR which was successfull. During the web server config I noticed that in my config utilty I only see Foundation and Reporting and Analysis LISTED..The essbase was missing. Essbase should be there with EAS, APS config info but the whole essbase component is missing. I stopped and restarted essbase from the scripts it worked fine..all the components are running as expected but not sure why Essbase is missing.
Can any one think of something??
Thanks for the help.
What is your OS?
After cloning EBS 11.5.10.2 with 10.2.0.4 DB single instance, When I use system administrator responsibility and lunch any form e.g. Concurrent Manager : Administrator, the form is coming blank and the responsibility tree/menu is missing. But from the Form menu --> File --> Switch Responsibility, I am able to select the responsibility tree. I have recompiled all the forms, menu, pl/sql lib, Generated Jar, flexfields using adadmin, recompiled apps schema using adadmin but no luck.Can you reproduce the issue from other clients/browsers?
Please clear the server cache and check then -- How To Clear Server Cache and Bounce Apache (Web Server)? [ID 295484.1]
Thanks,
Hussein
Similar Messages
-
HT3728 Time Capsule LED is solid Amber, will not show up in Airport Utility after any resets. Ideas?
Went to update my TC after adding my AppleID to the "Back to Mac" menu and in the Airport Utility screen a meesage popped up saying "An error ocurred while reading the configuration" and the TC disappeared from the Airport Utility screen. Now there is just a solid amber light. Unplugging the unit for over a minute and then plugging it back in has the same result. A soft reset does nothing, a hard reset does nothing, and a factory reset gets the amber light blinking but when I release the reset it goes back to solid amber. None of these resets gets the TC to show up in the Airport Utility.
I appreciate any help. Thanks.
Model: A1409 Time Capsule 2TBThe solid amber light is an indication that the TC cannot get out of startup mode, likely due to a power supply component failure.
Solid amber is not power supply.. it is a dead hard disk.. the TC cannot finish its boot if the hard drive is not working.
Jeepaxle
If the TC is in warranty or you have applecare on any computer Apple should replace it..
Otherwise it is the poor WD green drive they now use..
Open the TC and replace it.
Sometimes a low level format will revive them.. but I never trust a drive again that died.. Look for a 2TB hitachi or Toshiba.. (same thing). Far better than WD green.
http://www.ifixit.com/Device/Apple_Time_Capsule -
Essbase server is not showing in the windows services (11.1.2.1)
Hi All,
Essbase server is not showing in the windows services 11.1.2.1. when I checked the processes from task manager it is there.
Regards,The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/ -
I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydasOk... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options. -
HT1386 There are songs in my library that do not show up on the device after syncing
There are songs in my library that do not show up on my ipod after syncing.
Why would this happen ?Do they play in iTunes on the computer?
Are they from a different source or format that the ones that do sync? -
Western Digital drive not showing up in disk utility--Help please.
Hello all. This is my first post. I am having trouble with my WD 500GB external hard drive. It is not showing up in disk utility when connected either via the firewire or USB ports. I purchased the drive about 8months ago, brought it home and set it up as my Time Machine backup drive. It worked great for several months, until it got full. Then it stopped showing up on the desktop for no apparent reason. I discovered through reading support documents on the Apple web site that when I set the drive up initially I should have changed the partitioning protocol from master boot record to GUID, but I did not. I followed the apple web site instructions for making the change expos facto, but was instructed to press buttons that were "grayed out". As such, I couldn't do it. Perhaps foolishly, I thought that I would just start all over by reinitializing it, formatting it correctly (with my new found knowledge) and then do the time machine backup fresh. However, the drive no longer shows up in disk utility no matter how or in what order I connect it. When the drive is connected by firewire there is evidence of some recognition of the drive in system profiler, but it is listed as "External HDD Buttons and Lights". There is also evidence of the My Book showing up at a minimal level (eg. the firmware revision and a few other details are listed). On the front of the drive is a ring of blue lights that progress in a clockwise direction as soon as a connection is made via either firewire or USB. Before that it is solid blue. I have read through all the info that I can find on this site, and all the suggestions require the drive being recognized in disk utility. Without that, I am stuck. I know this must be a solvable problem, because the drive just a bucket of parts before it was manufactured. I just don't know enough to solve the problem or even know what qeustion to ask. I would really appreciate some help. Thanks in advance, and sorry for the long post.
If you can't boot from an OSX DVD, it sounds bad. Yet I think you said you were running Disk Utility from the DVD?
I got an external Firewire drive enclosure for 2.5 inch IDE drives from Other World Computing (OWC)
http://eshop.macsales.com/item/Other%20World%20Computing/MOTGFW400/ but similar items are available from many vendors like Newegg. About $60 for the basic model. More money can buy additional interfaces on the enclosure like FW800 and USB2; an AC adapter instead of letting the firewire bus power the drive (usually OK). -
My app. not showing on App Store anymore after using In-App purchase
It's more than a week that my app is not showing in it's category, after Apple released the new version, in the new version I used In-App purchase and both In-App purchase and the new version of the app are approved by Apple but they never showed up in their category since.
It seems it's happening to the new one which was approved yesterday and is disappeared from it's category under new releases section ( posted date was correct the same day it was approved )
Does any body else has this issue ?after Apple released the new version
Also know as an 'update'...
Looks like Apple has quietly changed the process where updated apps could be dated the day they were approved (more recent than the original release data) and show up at the top of the recently released apps all over again.
Updated apps will not appear at the top of the recently released list any longer, it seems.
If you search on your app by name, etc., it should still be there. If it is gone completely, use one of these email contacts...
Application Questions:
For general questions about applications or application requirements, contact:
[email protected]
Legal Questions:
For legal or contractual questions, contact:
[email protected]
Financial Reports (Monthly), Tax & Banking Questions:
[email protected]
new vendor setup, name changes, change of address
[email protected]
bank questions such as routing numbers, zengin codes, swift codes, etc.
bank account changes
[email protected]
submitting tax forms (W8, W9, Japan tax forms, etc.) year end tax questions re: 1042s (1099s go to A/P dept)
anything that says "tax" or "IRS"
[email protected]
missing payments, can't reconcile reports to payments, European Invoices
Sales and Trend Reports (Weekly and Daily):
For questions about weekly and daily reports contact:
[email protected] -
How to hide or do not show the receipt's name after miss called?
1. How to hide or do not show the receipt's name after miss called?
2. I do not want to show my message statement in the screen.I have also registered to this forum to inform that the problem with showing the MAC-address in the sidebar of the finder is still not solved.
The strange thing is that the Embedded Web Server says:
"This specifies the Bonjour domain name assigned to the device, in the form <host name>.local. If a user-specified host name has not been assigned, the default host name HPxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. This option cannot be modified."
But I did assign a user-specified host name and that name does show-up everywere (also within Bonjour), except in the sidebar of the finder (hp###xx##x####). Lots of people have the same issue, when searching on the interet, but not one has found the solution.
Please help with solving this issues? -
How to setup a guest network when the dialogue boxes do not show up in AirPort Utility 6.1
How do I setup a guest network when the dialogue boxes do not show up in AirPort Utility 6.1?
I see screenshots where there are boxes to 'enable' guest network but these simply do not apear on the Wireless tab in AirPort UtilityI now have a guest account, thanks to you!
I did the factory reset and was able to set up the guest account.
There were 3 problems, all of which I was able to solve.
The first problem was connect to Ethernet, which I selected by WAN port, as shown in the first screen shot. This page used to read just Ethernet and the Bridge Mode.
The second problem was whether to share a range of addresses or share a public IP address. I selected share a public IP address as shown in the first screen shot. I had tried the range of IP addresses in my earlier attempts, the ones that failed. Hopefully this will have no effect.
I have forgotten what the third problem was - only excuse is a few too many flavored drinks. I didn't have any problems solving it though.
What is really weird is I can log on to Guest and use on my iPad (first generation), my wife's iPod Touch (third generation), and my wife's 2011 MacBook Pro. I can't log onto Guest on my 2008 iMac, even after a restart. I get the image below.
Since I don't lug my iMac around a lot and it is connected by Ethernet, while my little make it right brain says figure this out, I am not going to worry about it.
Thank you again for your time and patience in helping me solve this.
Eric Root -
The approver does not show in the approval preview after saving sh. cart
Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1. Shopping created
2. The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3. Shopping cart is saved.
4. After saving , Check status transaction shows the shopping cart in status awaiting approval
5. The section approval shows No workflow started , application error occurred
6. T.Code SWI1 shows the workitem created for the shopping cart but in error.
7. The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
PawanHi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan -
I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
Any idea?Hello,
Can you tell us what versions of CUCM and CUxAC you are using? Just extensions alone in CUCM will not sync to the corporate directory within the attendant console application. You will at least have to have user's associated with those extensions and depending on your rule set within the console that should then bring those extensions into the console directory.
Thanks,
Tony -
Hello LR 5 is not showing me the Radial Gradients after I use them, it's been apply but I can't edit them since I can't click on them. (Linear gradients work fine)
[ H ] key to Hide/Unhide
-
HAAALP!!! AIRPORT EXTREME NOT SHOWING UP ON AIRPORT UTILITY
I have two airport extremes one to make network and one to expand it. the one i have to make the network is working fine and is a FINE peice of machinery. but the second one i have to extend my network will not show up on airport utility. and no i am not a stupid and didnt plug in the wires right everything is in perfectly and i use to be able to configure it then one day it just stops so i reset and configure it with airport utility. but after it restarts the airport and updates it. it will not show up on airport utility. PLZ help i have tried everything reset it a millions time and some times it will show up then i will change the settings again!! and it will not show up again!!!!! plzz plzz HELP
they are already in the same room and i am doing it on the same computer and it feels like it has gone into a land it can not come back from. also i just realized that it stays amber constantly like its in its startup process. and after a while the light just goes OFF. so idk and i have hard reset it and isnt it supposed to flash lights (cause it doesnt) when i hard reset it. well idk its weird its like it take forever to startup or something cause all of the sudden it will show up on airport utility but after i configure it again it restarts and can not be found again. ;{
-
a movie i purchased does not show up in the download after it suddenly stopped while downloading over half way through.. help!
I totally agree, I am not going to discredit your comment as everyone is entitled to their opinion as I am BUT, I will not bad mouth other members, especially since may have not have written my initial statement in a logical manner so Ill try and answer them in order to your response.
1. I DO LIKE iTunes in general and on the whole BUT I dislike the new update, iTunes 11, it has completely buggered everything up.
2. Prior to the update, everything worked brilliantly, including Apple TV. It was user friendly and was easy to use. The new update is counter-intuative and is hard to find, fix anything and as I have had to find out at my cost, reset my Apple TV and start downloading all over again. So let me reaffirm, it is iTunes11 I find hard to fathom, not the old iTunes.
3. No I am not a developer but I have been using PC's for over 20 years so I do know how one works.
4. Good Question about who would help me, again, it is someones opinion against someone elses. One day, I may write something that generally people agree with, another they may not, depends on the subject.
5. " I do not love Apple" ?yet I have an iPhone 4s, iPad and Apple TV, find that an illogical comment!
6. I have made a General Search on the forums on the subject and the general consensus is that the new update is one update to far.
7. Oh, I am not a genius otherwise I would have solved the issue in the first place!
Just to re-iterate, I am not bad mouthing Apple in general, all I am saying is that iTunes 11 is one update to far and I am not the only one saying it.... some have gone a lot further than I have, again, their opinion and who am I to argue with them as I have an opnion as you do and I will most deffinatly not bad mouth a member because I disagree with them for the above reason, debate it, yes, not belittle them.
Hope these have cleared up my initial statement? -
HT4623 my phone does not show up in my computer after update
my phone does not show up in my computer after update
Hey there, i got the same Problem with my MacBook Pro (Mavericks 10.9.4) and two iPhone´s 5 with the iPad 2 and the iPad Air, (all with iOS 7.1.2) since 2months. SOLUTION???
Since the change of Snow Leopard on Mavericks, the entire system of the MacBook is much slower. This is already noticeable at the beginning (start the MacBook Pro). It runs through the entire software. z.Bsp. Open Safari / Outlook, iTunes and more. for about 2months absolutely no back-up of my devices is possible!!
Every time when you connect the hardware (iPhone 5 / iPad 2 / iPad Air) iTunes stops responding and needs to close above EXIT NOW!! No back-up's my hardware (see above) possible!!!
but iPhoto is running with the devices and at least I can transfer the images.
Maybe you are looking for
-
i will try several times to create apple id when i verify my account it display your account is not verified.
-
Setup wireless for external hard drive?
I know that this is not mentioned in the manual at all, but I wondered if I would be able to set up my external hard drive to the AirPort Express and have it transmit those files wirelessly. It's annoying having to drag the external drive around and
-
Hi Experts, I want to add map of india like world by continent in my dashboad. Please help me on this. Thanks, Rishit
-
ORA-00600: kglgtbo1 and kcfrbd_3
Hello, I am running into two different ORA-00600 errors performing the same basic Insert statement. The insert is happening through our Java application. The process copies data from one database to another. There are clob values involved. We are
-
Restore deleted photo album in ipad
How do i recover photos deleted in error from iPad?