Essbase : ess00001.inn not created ( aborting calculation) ?
Hi Experts !!
When I calculate the cube, the member formulas in the scenario dimension are not calculating:
Error is : [ D:\........\ess00001.inn file can not be created because it already exist [adIndNewFile] aborted].
SO ..as my understanding i only need to delete the file ess00001.inn ,and should retry calculation..
But i m worried to delete that bacause of any loss..
Please suggest me the right way if i m wrong !!
Thank you
First I would back up the application directory (with the application stopped). then delete the file. Inn is a temporary file that Essbase uses when it is restructuring an outline. It sounds like a restructure failed.
Similar Messages
-
Essbase install for 11.1.2.0 does not create opmn.xml
We are currently doing a test install of EPM 11.1.2.0 and are having a specific problem. Foundation services are all installed and running fine but the Essbase install seems to not create the necessary opmn files so we can't start it. No opmn.xml is created in
user_projects/epmsystem1/config/OPMN/opmn
in fact nothing at all is created in there and so opmnctl complains that it can't find opmn.xml.
OPMN is running and controls OHS without problems. We also noticed that the Essbase configuration creates an empty opmnctl.bat script in the scripts directory. This is not a permissions issue, we are running the installer as admin. We have tried configuring Essbase in a cluster and not in a cluster with the same problem.Yes, it is 2008 R2 and I know it's not officially supported yet. We're just running it to get some information for when we install if for real with 11.1.2.1 comes out ... I think it might be related to the fact that Essbase can't contact the Foundation services db or something like this - the installer logs seem to suggest that it aborts before getting to the opmn creation phase. I need to check the logs in more detail. Here is what is in the leasemanager_essbase_<hostname>.log which is written when running the configuration of Essbase:
[2011-02-14T12:22:14.101-11:22] ESSBASE / Info (1320009)
Attempt to connect to database failed with error [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]TNS-12514: TNS:listener could not resolve SERVICE_NAME given in connect descriptor].
[2011-02-14T12:22:14.554-11:22] ESSBASE / Error (1320010)
Database operation failed with error [[DataDirect][ODBC Oracle Wire Protocol driver]String data code page conversion failed. Error in parameter 1.].
It seems that Essbase tries to get an OPMN lease by writing to the Shared Services repository using the ODBC driver and this fails with the above errors. It then shuts down and doesn't get as far as writing the opmn.xml file. -
HPCM - Manage Database not creating outline in Essbase application
Hi,
I've created the HPCM application from EPM 11.1.2.1 and I have also created the Stages, POV , Drivers and assignments but I cannot do data entry since the Essbase cube outline itself is not created.
I've gone to Manage Database -> "Deploy Now" several times to no avail . The Application and the Database gets created in Essbase but when I open the outline it is Blank!
My taskflow keeps showing the Status as "Done" but result variable as "Failed". Can anyone suggest what I'm doing wrong here? Or is there any setting/configuration in HPCM or Essbase that I need to set before I Deploy the HPCM application Calulation database and Reporting database?
Below is the Taskflow message I get :
Taskflow Participant Summary
Id wf-1330001062632 Application HPCMCG
Taskflow HPCMCG_DeployCube_D20120223T074416_e3f Initiator user1
Started Feb 23, 2012 7:44:22 AM Status Done
Description Run Now button initiated workflow
Participant Stage Name Status Result Variable Status Message Completed
user1 CalcCube Done Failure Action failed Feb 23, 2012 7:51:16 AM
Edited by: user8540032 on Feb 23, 2012 5:28 AM
Edited by: user8540032 on Feb 23, 2012 10:24 PM
Edited by: user8540032 on Feb 23, 2012 10:28 PMHi,
I've got the solution. To solve this problem, you would need to configure the registry of the PC where HPCM client is installed with:
TcpTimedWaitDelay
Registry key=HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Data type=REG_DWORD
Default value=0xF0 (240 seconds = 4 minutes)
Valid values=0x1E to 0x12C (30 to 300 seconds)
MaxUserPort
Registry key=HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Data type= REG_DWORD
Default value=20000
Valid values= 5,000 to 65,534 (port numbers)
In order to do this , you would have to do the following :
1. Create a new REG_DWORD value named TcpTimedWaitDelay. Set the value to decimal 30, which is Hex 0x0000001e. This value sets the wait time to 30 seconds.
2. Create a new REG_DWORD value named MaxUserPort. Set this value to at least decimal 32768 or 65534.
3. Create a new REG_DWORD value named MaxFreeTcbs. Set the value to decimal 6250. (The default is 2000 so you are basically tripling this value.).
4. Reboot the machine for the new settings to take effect.
Regards,
Jonathan -
I am able to do configure using the options. But the files abort,atoi,atol,getcwd, are not created.
it is showing messages as
checking for abort ...no
checking for atoi ...no
checking for atol ...no
checking for getcwd ...no
But there are no errors..
While make is given
make: ***No rule to make target 'abort.o', needed by libdb-4.5.a'. Stop.
is the error
Do we need to add anything while configuration so that it creates .o files?
Please let me know if i need to edit the configure script
thanks and regards
elizabethHi Elizabeth,
If a line like the following:
"configure:3671: m68k-elf-gcc -O conftest.c >&5"
exists in your configuration log output than this is an indication that the compiler and the tools are not installed or configured properly. Try to reinstall the toolchain.
Have you tried to build a simple "hello world" with the m68k-elf-gcc on your machine ? (since you probably run uCLinux, make sure that if you have uC-libc installed this is found in the supplied path for the tools).
The command line parameters should be:
env CC="m68k-uclinux-gcc" CFLAGS="-m5200 -lc" LDFLAGS="-Wl,-elf2flt" ../dist/configure build=i386-linux host=m68k-uclinux --target=m68k-uclinux
If you still end up with errors, you will need to run make clean; make so that you won't mess up and mix a small build config with an ordinary one.
Let us know if the problem persists so we can help you further.
Best regards,
Andrei -
Can not create recovery discs on satellite C875D-S7330
Can not create recovery discs on satellite C875D-S7330. Drive runs and appears to be doing it thing, then aborts saying it has error to check disc for scratch or dust on media. Error code: OEO1B5-26-2AO3OC 00 . Tried 3 new discs all same results. Tried a 4th disc trying to continue on with disc 2 of recovery discs, got another error on this one. Error code: 020150-20-00000000.
Anyone have a fix for this? Had this machine less than 24hrs.
Thanks
Don B.Personally, I would get a 16gig USB thumb drive and put your recovery on it. It eliminates having to swap disks during recovery and it's easy to store. I've used mine several times and it's worked perfectly every time.
L875D-S7232 (Win 8.1) -
How to write the expression when create the calculated column?
Dear,
I want to create some calculated column in my attribute view, but I don't know how to write the code in the expression, is there any introduction about this part, how to use those function and how about the grammar in this expression code ? or is there any example about this calculated column?
Thanks for your sincerely answer.Hi Zongjie,
you can find some information about the creation of calculated columns in the HANA Modeling Guide (http://help.sap.com/hana/SAP_HANA_Modeling_Guide_for_SAP_HANA_Studio_en.pdf).
Within chapter 6.2.1 (Create Analytic Views) you can see under point 7 some basics and also a simple example. The same is also valid for Calculation Views.
Chapter 8.9 (Using Functions in Expressions) describes the different available functions.
You also can use the integrated search in the HANA Studio by clicking the "?" button in the button left corner. Then you get some links in the side panel with related information.
In general you can write your expression manually or you can just drag and drop the functions, elements, operators into the editor window. For example if you drag and drop the "if" function into the editor window you get "if(intarg,arg2,arg3)" inserted. The arguments can be replaced manually or also by drag and drop.
It is also worse to use the "Validate Syntax" button on top of the editor window. It gives you directly a feedback if your expression syntax is correct. If not you get some helpful information about the problem (ok, sometimes it is a little bit confusing because of the cryptic error message format ).
Best Regards,
Florian -
ORA-01180: can not create datafile 1 during RMAN restore.
Hello,
I am trying to refresh one of our QA environments and I am getting this error message:
RMAN> run
2> {
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> restore database;
6> recover database;
7> }
allocated channel: c1
channel c1: SID=5 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 08-NOV-12
using channel ORA_DISK_1
creating datafile file number=1 name=+DATA1/alephpr/datafile/system.269.722874729
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2012 16:27:40
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATA1/alephpr/datafile/system.269.722874729' I created a new database from scratch with the same name as is in Production, later on I will proceed to rename it to the right one. I started the steps for refreshing the PRD copy:
RMAN> shutdown immediate
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
Total System Global Area 534462464 bytes
Fixed Size 2228200 bytes
Variable Size 176160792 bytes
Database Buffers 348127232 bytes
Redo Buffers 7946240 bytes
RMAN> set dbid=3573460394
executing command: SET DBID
RMAN> restore controlfile from '/restorealeph/c-3573460394-20121106-01';
Starting restore at 08-NOV-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
+output file name=+DATA1/alephpr/controlfile/current.260.798747585+
+output file name=+FLASH/alephpr/controlfile/current.276.798747585+
Finished restore at 08-NOV-12
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1Once the control file is restored, I need to crosscheck, delete expired and catalog the backups at the new server:
RMAN> crosscheck backup;
Crosschecked 48 objects
RMAN> delete noprompt expired backup;
Deleted 48 EXPIRED objects
RMAN> list backup summary;
specification does not match any backup in the repositoryI need now to catalog the backups we transferred from Prod into the QA server's directory /restorealeph:
RMAN> catalog start with '/restorealeph/';
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
4097 B F A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
4098 B A A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
RMAN> list backup tag="BACKUP_ALEPHPR.TUR_110712030000";
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4097 Full 178.04G DISK 00:00:00 07-NOV-12
BP Key: 4097 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9cnpm51u_1_1
List of Datafiles in backup set 4097
File LV Type Ckp SCN Ckp Time Name
1 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/system.269.722874729
2 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/sysaux.266.722874731
3 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.289.722874727
4 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.257.722874727
5 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/users.298.722874731
6 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/audit.299.723372305
7 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_datos.260.723372307
8 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_indices.261.723372307
9 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_hist.262.723372309
10 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_l.264.723372319
11 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_long.265.723372349
12 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_md.270.723372355
13 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.271.723372369
14 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_xl.272.723372375
15 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_l.273.723372401
16 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_md.274.723372427
17 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_sm.275.723372455
18 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_xl.276.723372473
19 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/tools.278.723372501
26 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.300.736088959
27 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_meta.301.746385117
28 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_pstore.302.746385119
29 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_cache.304.746385121
30 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.305.796391931
31 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.306.796392185
BS Key Size Device Type Elapsed Time Completion Time
4098 16.89G DISK 00:00:00 07-NOV-12
BP Key: 4098 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9enpm6lj_1_1
List of Archived Logs in backup set 4098
Thrd Seq Low SCN Low Time Next SCN Next Time
1 35722 6919870864350 06-NOV-12 6919871887697 06-NOV-12
1 35723 6919871887697 06-NOV-12 6919872372211 06-NOV-12
1 35724 6919872372211 06-NOV-12 6919872410158 06-NOV-12
1 35725 6919872410158 06-NOV-12 6919872447301 06-NOV-12
1 35726 6919872447301 06-NOV-12 6919872503332 06-NOV-12
1 35727 6919872503332 06-NOV-12 6919872551564 06-NOV-12
1 35728 6919872551564 06-NOV-12 6919872603881 06-NOV-12
1 35729 6919872603881 06-NOV-12 6919872655942 06-NOV-12
1 35730 6919872655942 06-NOV-12 6919872698722 06-NOV-12
1 35731 6919872698722 06-NOV-12 6919872741655 06-NOV-12
1 35732 6919872741655 06-NOV-12 6919872782284 06-NOV-12
1 35733 6919872782284 06-NOV-12 6919872872302 06-NOV-12
1 35734 6919872872302 06-NOV-12 6919872910206 06-NOV-12
1 35735 6919872910206 06-NOV-12 6919872945577 06-NOV-12
1 35736 6919872945577 06-NOV-12 6919872980056 06-NOV-12
1 35737 6919872980056 06-NOV-12 6919873013411 06-NOV-12
1 35738 6919873013411 06-NOV-12 6919873050761 06-NOV-12
1 35739 6919873050761 06-NOV-12 6919873084996 06-NOV-12
1 35740 6919873084996 06-NOV-12 6919873122049 06-NOV-12
1 35741 6919873122049 06-NOV-12 6919873521767 06-NOV-12
1 35742 6919873521767 06-NOV-12 6919873952773 06-NOV-12
1 35743 6919873952773 06-NOV-12 6919874258549 06-NOV-12
1 35744 6919874258549 06-NOV-12 6919874472213 06-NOV-12
1 35745 6919874472213 06-NOV-12 6919874744856 06-NOV-12
1 35746 6919874744856 06-NOV-12 6919875113086 06-NOV-12
1 35747 6919875113086 06-NOV-12 6919875733337 06-NOV-12
1 35748 6919875733337 06-NOV-12 6919876139061 06-NOV-12
1 35749 6919876139061 06-NOV-12 6919876707162 06-NOV-12
1 35750 6919876707162 06-NOV-12 6919877706313 06-NOV-12
1 35751 6919877706313 06-NOV-12 6919877919039 06-NOV-12
1 35752 6919877919039 06-NOV-12 6919878024429 06-NOV-12
1 35753 6919878024429 06-NOV-12 6919878107673 06-NOV-12
1 35754 6919878107673 06-NOV-12 6919878258511 06-NOV-12
1 35755 6919878258511 06-NOV-12 6919878308336 06-NOV-12
1 35756 6919878308336 06-NOV-12 6919878424419 06-NOV-12
1 35757 6919878424419 06-NOV-12 6919878488485 06-NOV-12
1 35758 6919878488485 06-NOV-12 6919878827092 06-NOV-12
1 35759 6919878827092 06-NOV-12 6919879350098 07-NOV-12
1 35760 6919879350098 07-NOV-12 6919879675556 07-NOV-12
2 35949 6919870864360 06-NOV-12 6919871494640 06-NOV-12
2 35950 6919871494640 06-NOV-12 6919871887487 06-NOV-12
2 35951 6919871887487 06-NOV-12 6919872410655 06-NOV-12
2 35952 6919872410655 06-NOV-12 6919872552468 06-NOV-12
2 35953 6919872552468 06-NOV-12 6919872698940 06-NOV-12
2 35954 6919872698940 06-NOV-12 6919872872690 06-NOV-12
2 35955 6919872872690 06-NOV-12 6919872980371 06-NOV-12
2 35956 6919872980371 06-NOV-12 6919873085902 06-NOV-12
2 35957 6919873085902 06-NOV-12 6919873569082 06-NOV-12
2 35958 6919873569082 06-NOV-12 6919873949096 06-NOV-12
2 35959 6919873949096 06-NOV-12 6919874404640 06-NOV-12
2 35960 6919874404640 06-NOV-12 6919875011814 06-NOV-12
2 35961 6919875011814 06-NOV-12 6919875631429 06-NOV-12
2 35962 6919875631429 06-NOV-12 6919876324885 06-NOV-12
2 35963 6919876324885 06-NOV-12 6919876363526 06-NOV-12
2 35964 6919876363526 06-NOV-12 6919876748508 06-NOV-12
2 35965 6919876748508 06-NOV-12 6919877741784 06-NOV-12
2 35966 6919877741784 06-NOV-12 6919878108943 06-NOV-12
2 35967 6919878108943 06-NOV-12 6919878424477 06-NOV-12
2 35968 6919878424477 06-NOV-12 6919879012111 06-NOV-12
2 35969 6919879012111 06-NOV-12 6919879260589 07-NOV-12
2 35970 6919879260589 07-NOV-12 6919879350086 07-NOV-12
2 35971 6919879350086 07-NOV-12 6919879464935 07-NOV-12
2 35972 6919879464935 07-NOV-12 6919879548399 07-NOV-12
2 35973 6919879548399 07-NOV-12 6919879675564 07-NOV-12
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ALEPHPR 3573460394 PARENT 1 13-MAY-10
2 2 ALEPHPR 3573460394 PARENT 2229467 28-JUN-10
3 3 ALEPHPR 3573460394 CURRENT 6918261828355 26-SEP-12The ASM structure is created...
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 509282 507421 0 507421 0 N DATA1/
MOUNTED EXTERN N 512 4096 1048576 50641 42850 0 42850 0 N FLASH/
ASMCMD> cd DATA1/ALEPHPR/DATAFILE
ASMCMD> pwd
+DATA1/ALEPHPR/DATAFILEBoth source and target databases are 11.2.0.2 PSU 6 running on Linux x64. I cannot use RMAN Duplicate since there is no visibility among different environments (PROD - QA in this case).
Any idea?
Thanks
Martin
Edited by: martin.morono on Nov 8, 2012 11:19 AM
Edited by: martin.morono on Nov 8, 2012 11:49 AMThanks Levi,
I slightly modified your script to recatalog the backup pieces since they are note stored at the same location in PR and QA.
No luck. The error message is different but the result is the same... it keeps failing.
RMAN> run {
2> allocate channel c1 device type disk;
3> allocate channel c2 device type disk;
4> restore controlfile from '/restorealeph/c-3573460394-20121107-01';
5> startup mount;
6> catalog start with '/restorealeph/';
7> restore database from tag 'BACKUP_ALEPHPR.TUR_110712030000';
8> }
allocated channel: c1
channel c1: SID=191 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 09 NOV 2012 13:11:09
channel c2: skipped, AUTOBACKUP already found
channel c1: restoring control file
channel c1: restore complete, elapsed time: 00:00:15
output file name=+DATA1/alephpr/controlfile/current.260.798747585
output file name=+FLASH/alephpr/controlfile/current.276.798747585
Finished restore at 09 NOV 2012 13:11:24
database is already started
database mounted
Starting implicit crosscheck backup at 09 NOV 2012 13:11:31
Crosschecked 52 objects
Finished implicit crosscheck backup at 09 NOV 2012 13:11:39
Starting implicit crosscheck copy at 09 NOV 2012 13:11:39
Crosschecked 2 objects
Finished implicit crosscheck copy at 09 NOV 2012 13:11:40
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_1.279.795017193
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_34950.273.795014469
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_1.281.795017413
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_2.283.795017519
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_3.290.795018411
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_4.291.795018559
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_5.292.795018707
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_6.293.795018811
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_7.294.795018899
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_8.295.795020509
File Name: +flash/ALEPHPR/CONTROLFILE/Current.268.798725123
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YEs
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Starting restore at 09 NOV 2012 13:11:48
released channel: c1
released channel: c2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/09/2012 13:11:48
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>Just in case, I re-run this script including the crosscheck backup and the delete noprompt expired backups before restoring an the error messages were the same.
THanks again for your help.
Regards.
Martin
Edited by: martin.morono on Nov 9, 2012 7:21 AM -
Regarding OBD is not created for some materials
Hi,
I have created one STO using BAPI_PO_CREATE1 with 10 articles,for that STO,OBD is automatically created.In that OBD is created for 7 articles and for the remaining 3 articles OBD is not created.Can any one tell me,what is the reason?
ThanksDear Arun,
You wrote
=============
Cache is first in first out... if you exceute too many queries then cache might force out the first query for want of memory. Check the cache immediately after the query is ruin once then you should also check the cache settings for the query in RSRT to see if cache is enabled for the query. Ideally the option for cache should be " Main memory cache with swapping " in RSRT.
==============
I executed my query in question as the first query but no cache was created. The options for the cache mode was 'H Query reads data upon navigation' and 'main memory without swapping' along with a tick in the 'Query cache added to Delta' checkbox.
Just to check, i went on removing formulaes and calculated key figures and free characteristics from the query one by one and in the end the cache did get created for the same query. But I still could not pinpoint the exact reason for the query not producing cahce in its original form.
It only makes me think that there may be a particular scenarios or a peculiarity pertaining to the design of a query, that would prevent its cache being generated.
regards,
Kulmohan -
Application not appearing in Calculation Manager
Dear All,
I have created a new application on test environment, but it is not visible in Calculation Manager.
Checked the application process, its the same i use to create applications previously.
I have done the same for creating applications on multiple times with no issues. Any thoughts what can go wrong
Note: A few days back the Calculation Manager stopped responding when we try to open the calculation manager through workspace we raised an Sr, Oracle support suggested to re-deploy the
calculation manager configuration with database schema and increased the jvm xms size from Operating System Registry for calculation manager.
Regards
AceDeployed with Default Application Group, And For Rules its deployed with calculation manager,
we have done these all steps, but when we open calc manager to import business rules in new created application, it doesn't show us our new created application.
While Planning shows newly created application.
Regards.
Ace -
Logical Volumes Not Creating w lvcreate? Install??
After following the arch raid guide i have gotten all tge way down to creating logical volumes and i get this
lvcreate -L 20G VolGroupArray -n lvroot
/dev/VolGroupArray/lvroot: not found: device not cleared
Aborting. Failed to wipe start of new LV.
device-mapper: remove ioctl on failed: Device or resource busy
here is vgdisplay
-- Volume group ---
VG Name VolGroupArray
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 17
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 97.75 GiB
PE Size 4.00 MiB
Total PE 25024
Alloc PE / Size 0 / 0
Free PE / Size 25024 / 97.75 GiB
VG UUID rP0ooH-VdCy-fMZM-sB0g-90zi-Gv2o-gBZWC1
pls help i am now stuckmattbarszcz wrote:So I went back to the live cd, I ran efibootmgr with no arguments, and sure enough there was only 1 entry for the Windows Boot Manager. It seems that efibootmgr commands don't seem to take effect.
Because of bugs in efibootmgr and/or EFI implementations, efibootmgr doesn't always work. Using bcfg from an EFI shell or bcdedit in Windows can be more effective on some systems. That said, if efibootmgr worked for you before, I'm not sure why it would stop working, or why an existing entry might disappear. (Some EFIs do delete entries that they detect are no longer valid. This shouldn't have happened with a whole-disk dd copy, but if you duplicated the partition table and then used dd to copy partitions, it might well have happened to you. I suppose it's conceivable that the firmware detected the change from one physical disk to another, too, and deleted the original entry because of that change.)
I referenced the rEFInd page here: http://www.rodsbooks.com/refind/installing.html#windows and followed the procedure to install an entry for rEFInd from Windows. I was able to add an entry no problem through windows.
Does anyone have any suggestions as to why this doesn't work? Nothing has changed about the system other than the disk.
It's unclear from your post whether the entry you created in Windows now works. If it does, then don't sweat it; just keep using that entry, and if you need to make changes and efibootmgr doesn't work in the future, plan to use either Windows or the bcfg command from an EFI version 2 shell. -
Withlding tax invoice is not creating
HELLO
withholding tax invoice is not generating at the time of payment but it is calculating only.
Steps
Create standard invoice Rs 100
Attach payment withlding tax on line 6%
Validate and approve
Crate payment with Rs 94(deduct Rs 6%)
Check withlding tax line on standard invoice line and it is available there with negative Rs6
But system doesnt create withholding tax invoice for Rs 6?
Setup is withlding tax at the time of payment and create withlding tax at paymentHi,
I checked the difference b/w normal standard invocie and generating invoice from recurring and found the difference only in header PAYMENT WITHHOLDING TAX GROUP.
When i not to choose payment wihthloding tax group in invoice header and select only in line,and validate and payment,it deduct withholding tax OK but not create withholding tax invoice?
But when i select payment withholding tax group on INVOICE header level,than it create withholding tax invoice as well as deduct on payment amount.
Is it mandatory to select withholding tax group on header level? -
How to create a calculated field
Hi. I'd like to know how to create a calculated field for a master- detail form. For example: having two db fields price and quantity, i created a the total item (price * quantity) as pl/sql function like this:
begin
:p13_item_total := :p13_price * :p13_quantity;
end;
However, the item is not calculated. It is not and instant calculation. I mean if i modify either price or quantity, how to recalculate item total immediatelyYou must submit the page to do it with PL/SQL. If you do not want to submit the page, you must do it with JavaScript.
Thanks,
Tyler -
Classic Scenario PO not creating, only PR
Hi,
I'm using SRM 5.0, in classic scenario to R/3 4.6C. My Shopping Carts to R/3 are complete, but is not creating a PO. It creates a PR. If i run, ME57, assign and process, PR is already assigned a Fixed vendor, and PO is created without any further data being added. (Vendor, price, etc)
I'm confident my number ranges and Doc Type settings are correct.
In SRM customising, my 'Define Objects in BE Sys, has vaild P.Group, Cat Id, R/3 Source sys, Always external and PO if item data complete'.
When I trace RFC, RSRFCTRC, it is calling BAPI_REQUISITION_CREATE. Not BAPI_PO_CREATE1. Vendor master, set to auto create PO, not using material masters. Mat group and Vendor replicated from R/3 to SRM. Tax is calculated in R/3.
Any help appreciated. Is there a FM in SRM to test why its not creating a PO?
regards AdamHi
Couple of reasons might be possible ->
1) Try de-activating all the Custom BADI Implementations using SE19 Transaction (name starting with Y or Z) in SRM System for the time being, and then try out again.
Seems to be some BADI - BBP_TARGET_OBJECTS
BBP_TARGET_OBJTYPE might be over-riding the back-end documents creation.
2) Incase above step, does not help, Try creating a PO or PR directly into R/3 system (using ME21N or ME51N Transactions with the Document typeused in SRM), with the same data that is passed in the RFC call (you traced earlier) then see, what is happening in that case ?
Do let me know.
Regards
- Atul -
Help in creating MDX Calculated Member using attributes from multiple Dimension
Hi All,
First of all my knowledge on MDX is basic. In one of our projects, there is a requirement to create calculated member (similar to derived fields in SQL) which is more of a dimension attribute and not really a calculated member. Due to IP issues I cannot paste
the actual queries but I will provide an SQL Query equivalent to what I am trying to achieve:
Select P.Product, Case When ISNULL(FS.ArtistName,'') = '' Then P.ArtistName Else FS.ArtistName End Artist
From
dbo.FactMusicSales FS
Join dbo.dimProduct P
on P.DimProductKey = FS.DimProductKey
We are trying to replicate the logic for derving the "Artist" field using MDX script.
We are running into issues while trying to build an MDX expression using the above logic. The main issue being that the new field/member "Artist" would not be calculated unless its elements are selected (FS.ArtistName, P.ArtistName). Besides this
we are also unable to place this new member in a different folder other than a sub folder under the measures. Any pointers to solving this would be really helpful.
Thanks in Advance,
VenkiHi Venki,
According to your description, you need to create calculated member (similar to derived fields in SQL) which is more of a dimension attribute and not really a calculated member, right?
In your scenario, you needn't to achieve this requirement by using MDX. You can use a named query on your data source view. A named query is a SQL expression represented as a table. In a named query, you can specify an SQL expression to select rows and columns
returned from one or more tables in one or more data sources. So in you scenario, you can use your query on the DSV, and then use the modified table to create a dimension.
http://msdn.microsoft.com/en-IN/library/ms175683.aspx
Regards,
Charlie Liao
TechNet Community Support -
Hello,
Scope: JVM error during initial install of SAP HANA Studio Developer Edition v1.00.80, Win86/32bit
Source: installation files pulled from HANA Studio tab at https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/, which is a link from the main HANA site of http://scn.sap.com/community/developer-center/hana. zip folder: "sap_hana_win32_studio_rev80"
Targeted O/S: Windows 7, 32-bit, local Java is SE 7, update 67. Java environment has been confirmed via checks provided at http://www.java.com/en/download/manual.jsp
Actions taken:
Attempted to update the installation's eclipse.ini file by reducing the -Xmx value; see details below.
Read thru postings such as http://scn.sap.com/thread/3390626 and the threads it recommended.
Checked OSS (ie Note 1859686 - HANA Studio does not start)
Description of installation error:
Shortly after executing "hdbinst", it fails with the error "Could not create the Java Virtual Machine". I've verified that there is nearly 3G of memory free. What I did notice, as shown in the attached files, is that Eclipse is part of this installation and it's pre-loaded with the "eclipse.ini". I firmly believe the solution could be to reduce parameter "-Xmx1024m" to "-Xmx512m" but it's a catch-22 because even after updating eclipse.ini (in installation folder C:\Program Files\SAP\hdbstudio\tmp_p2director2014.08.13_13.36.44\director), the install program requires that the "hdbstudio" folder to be empty upon restarting it.
Since the installation is basically a package with a lot of .jar files, there is no eclipse.ini file available in the source install folder; otherwise, updating it there would be the easiest solution if that option were available. The file is only available in the targeted deployment folder above.
If you have encountered this same error and were able to resolve it, I would be grateful to know of your solution. Thanks very much.
FYI: the HANA Client installed with no issues.
Jim Cleek
FYI: the images below reflect the sequence of images produced during the installation.
after clicking OK above, the screen below gets updated (see the "is not empty" msg).
Below is the eclipse.ini file located in the deployed/target folder:
Message was edited by: Jim Cleek
FYI: Using information from the SAP HANA Database - Studio Installation and Update Guide, I tried to override the installation's use of its eclipse.ini file by passing my own modified version (with "-Xmx512m") of that file that was placed in a separate folder. The cmd used via DOS window was "hdbsetup.exe -a studio --configfile=C:\Users\Admin\Downloads\eclipse.ini" and even though it successfully launched the SAP HANA Lifecycle Management gui, it failed on the first step with the same JVM create error as above because it appears to have used its own eclipse.ini file, which has "-Xmx1024m".Update: a message was opened with SAP but unfortunately they could not provide a resolution for this particular scenario. They admitted that the eclipse.ini file cannot be updated since it is bundled as part of the installation package. One point to make that I did not make before was that this was being attempted on an Oracle VirtualBox (4.3.10); the SAP HANA contact said he assumed that SAP has not tested this particular scenario, thus it could not be supported.
Resolution: the end result was to abort trying to install SAP HANA Client and Studio on the Oracle VirtualBox but to install it locally on my own desktop, which runs on Windows 7 Enterprise 64-bit with 8G of memory. The SAP HANA files below were downloaded, extracted and installed successfully in the order shown.
FYI: the Studio installation detected that a 64-bit version of Java was not installed so I installed that and then adjusted the User environmental variable JAVA_HOME to point to that new path, leaving the System variable still pointing to the pre-existing 32-bit Java path.
SAPCAR 7.20 -> Windows on x64 64bit: SAPCAR_315-20010453.EXE
IMDB_CLIENT100_80_0-10009664.SAR Revision 80 for SAP HANA CLIENT 1.00
Support Package SAP HANA CLIENT 1.00 Windows on x64 64bit
IMC_STUDIO100_80_0-20007647.SAR Revision 80 for SAP HANA STUDIO 1.00
Support Package SAP HANA STUDIO 1.00 Windows on x64 64bit
jre-7u67-windows-x64.exe - http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html
Jim Cleek
HP Enterprise Services
Maybe you are looking for
-
How do you transfer music from one computer to another
I purchase a new desktop PC and now want to transfer music purchases and imported music from my old desktop to my new desktop. What's the easy way to do this?
-
Now that my Sony HD5 seems to be on its last legs I'm thinking of biting the bullet and getting an iPod. I have a (probably very noobish) question about the PIM functions though: how do I get my data into them? Is it a question of syncing with MS Out
-
Merge of planned orders from the same product
Hi Experts, We have some lines where we process materials with different properties so setup time/costs between ones and anothers are very important. If we run the PPDS Optimizer or scheduling based on setup groups for a period of 2 weeks then depend
-
Hi Everyone, I want to create a powershell script file 1) Check a directory and upload all termset csv files into the SharePoint local taxonomy. 2) Input paramaters - directory that containss termset csv files, Local Termstore to import to, 3) Prior
-
I'm running Windows 8.1. I had to create a new account identity because of some corrupted files. Now I can't open Reader V9. Message comes up saying it's part of a Suite (CS4 Web Design) and I need to open other module first. I tried opening Dream