Essbase Studio v11.1.x compatibility with Essbase v9.3.1

Hi
Does any one know if we could use Essbase Studio in version 11.1.x with Essbase 9.3.2 ?
Thanks for your answers...

From what I checked in the available support matrices, at least 11.1.1, 11.1.1.1, and 11.1.2 do not support 9.3.X. The matrix for 11.1.1.3 does not have information related to release compatibility.
The only version that supports a different release is 11.1.1.1, which says to support 11.1.1.X.
You can find the support matrices in:
http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
Regards.

Similar Messages

FINAL CUT STUDIO 5.1 (Universal) compatibility with Mac os 10.6.4

We have just purchased a brand-new Mac Pro running Mac OS 10.6.4 my question is this, are there any known incompatibilities with Final Cut Studio 5.1 (Universal) running on a Mac Pro with Mac os 10.6.4.

Try the Firewire Basic setting.
Also, your camera should be powered on and connected before the mac is turned on. Then, when you fire up the mac and launch FCP, close any projects that open with it.
Then, choose your Easy Setup before you open a new porject to capture into. Then it should work.
Message was edited by: Red Jacket Mike

Blue Ray Disk drive compatibility with DVD S Pro, Mac Pro

Ok, I'll make this an official question, where might I find info on BDR drive compatibility with DVD S Pro, Mac Pro, etc? I'm a little surprised that there doesn't seem to be much info available.
I can always use my Pioneer BDR-202 with a windows box, I have several, but I'm trying to get AWAY from them.
Any thoughts, links, etc. welcome, thanks
Les

Blu-ray offers a level of interacivity that is not possible with DVDs, so it isn't just an different drive that you are getting with Blu-ray. Seeing how Apple didn't upgrade DVD SP with the new FCP Suite 2, it is reasonable to assume they are working on a separate Blu-Ray Studio Pro, that is going to be completely different than DVD SP. Adobe Encore's support for Blu-Ray is extremely buggy, so obviously moving from DVD programming to Blu-Ray programming isn't just a simple tweak to the code.
Apple doesn't pre-announce software they are working on so this is all guess work, but it is reasonable to assume that they are working on a Blu-Ray programming application. Be patient. Do you really have the money to burn on the bleeding edge of new technology? A single Blu-Ray burnable disc sells for $20. Two months ago the exact same disc sold for $45. Prices will continue to fall as things stablize.

Mac compatibility with Autodesk

Hello,
As an architecture student, I'm working with programs such as Autodesk Autocad en Autodesk 3D Studio Max. Since my knowledge of these programs is fairly okay, I'm not thinking of switching to other programs. Now I'm planning to buy a Mac Book Pro and I was wondering what about the compatibility with Mac? I know Bootcamp and I know Parallels, and I know these are solutions to run the software on your Mac, but what about the performance? Similar to Pc or faster/slower?
And does anybody know if there is a Mac version of Autocad or 3DS in the pipeline?
Thanks in advance
ps im not sure this is the correct place to post, so excuse me if i'm wrong

Autodesk does not provide either AutoCAD or 3dsMax anymore. It's AutoCAD Mac version was an R. edition (primary to 2000) and from what I've just looked upon 3dMax v.9 is only Windows based. So, in order to have full compatibility-and save yourself the heavy burden of purchasing again-you'll have to run through BootCamp (or Parallels).The only report I've seen on this is here (and I think it's very good news):http://discussions.apple.com/thread.jspa?threadID=500994

Sun Compiler Compatibility with g++

I am new to C++ so I believe this is a basic question.
I was given the job of compiling a C++ program to be compatible with Sun compiler 5.5 Patch 113817-19 2006/10/13 on Solaris 9 Sparc. Since I did not have the Sun One Studio 8 I compiled the program using G++ 3.4.6. Question: will this program compiled with g++ 3.4.6 satisfy the requirements.
Any help would be appreciated.
--Acevez

You have to ask those imposing the requirement what they actually care about.
If you need binary compatibility, the answer is "No." Object code produced from C++ source code by any version of Sun C++ cannot be linked with object code produced from C++ source code by any version of g++.
If the requirement is that the source code be successfully compiled by Sun ONE Studio 8 (C++ 5.5), the answer is "maybe." Limitations include the following:
1. Every compiler has bugs. Code might trigger a bug in one compiler but not in a different compiler.
2. g++ has extensions not supported by Sun C++ 5.5. Source code that uses an unsupported extension probably won't work the same (and probably won't compile) with Sun C++ 5.5. If you write code for use with g++, you might not know when you are using a g++ extension.
3. The default version of the C++ Standard Library used by Sun C++ is libCstd, which does not fully conform to the C++ standard. Sun C++ also provides the STLport library as an option. Standard-conforming source code that works with g++ and its libstdc++ might not work with Sun C++ libCstd, but will probably work wtih STLport. If you are not allowed to use STLport with Sun C++ and write code for g++, you might write code that depends on features not supported by libCstd.
In summary, you are asking questions about portability. The short answer is that
A. C++ object code is in general not portable among C++ compilers, and
B. You don't know whether source code is portable until you port it.
That said, most programmers find most of the time that well-written code that has portability in mind works fine with Sun C++.
Finally, Sun Studio 8 is obsolete. It would be better to use the current release, Sun Studio 11, which is free. You can get it here:
http://developers.sun.com/sunstudio
Sun Studio 11 is source and binary compatible with Sun Studio 8, in the following sense:
Valid source code that works with Sun Studio 8 will also work with Sun Studio 11.
Object code produced by Sun Studio 8 can be linked into programs built by Sun Studio 11.
Good luck!

How is compatibility with creative cloud products (Photoshop and Illustrator) with Macbook Pro? I am making a big purchase and would love some feedback

how is compatibility with creative cloud products (Photoshop and Illustrator) with Macbook Pro? I am making a big purchase and would love some
feedback

Hi Frederick,
You're spending a lot of money. I will add my 2¢ -- -- but you must, as I assume you know, fully research your options.
Environment:
Start with your workspace (inc. lighting) and your clothes.
Screen:
The iMac screens are lovely, but not, from what I hear, monitor-grade accurate. For critical color work, use NEC or Eizo monitors. I use NEC, with their SpectraView II software and an X-Rite ColorMunki photospectrometer. At the time, this was the least expensive color-calibrated workflow.
Printer:
Epson's are great, imho. I use a 3880 in my studio and rent a 9900 by the hour when needed. I have read of problems (iirc) with one of the printers in the 7000 line, however. The take-home lesson that I filed in my brain was, "If you're going to spend the money on the 7000 line, just get the 9000 line."
Aperture workflow:
Aperture is a fantastic workflow tool. Since you are adept with PS, you should set PS as your external editor. Use Apertures formidable tools for storing and organizing your Images, and its robust editing tools for either all your proofing, or all but your most demanding editing needs. That said, allow a good bit of time to get the feel of Aperture. It is not at all like Bridge. But your important choice is which RAW converter you want to use. There is, imho, no reason to use Aperture if you are going to use Adobe's (or anyone else's) RAW converter.
Good luck!
--Kirby.

Is PE7 compatable with windows 7 64bit?

are there any versions of Adobe Premiere Elements besides PE8 that are compatable with Windows 7 64bit? I have heard of lots of problems with PE8 and I would prefer using PE7 if possible. Actually I use PE3 with XP home 32 bit and love and don't really want to upgrade but it seems like i might have to. thanks

i downloaded the PE8 trial and have worked with it for a couple of hours and had only one glitch so far. while capturing it froze after about 10 minutes, i had to capture the rest and splice it in. i added some titles and a 2nd audio track that was mono and used audio effects to copy left track to right track, i faded in video and audio and so far everything seems to be working fine.
i have an intel MB D975XBX2
dual core processor,
4 gigs of RAM
win7 pro 64bit
it's taking a little getting used to but probably not as hard as trying to learn a whole other program like sony studio for example. i've got 30 days and i'll keep using it and see how it goes but so far, so good.

Crystal Report XI compatibility with VS 2008

Hi,
I have read varying anwers on this. Is Crytal report XI 3.0 is compatible with VS 2008 or crystal report 2008 will be required in case we use VS 2008 for web application.
Thanks
Kajal

Is it correct the version of crystal report (XI Release 2) that comes bundled with Business Object XI Release 2 is not compatible with VS 2008? If yes, then with which version of visual studio is it compatible.
Yes, that is correct. XI R2 is compatible with VS.NET 2002/2003/2005
There is a latest release of Business Object under version number XI 3.0 (if I am not wrong). Which version of crystal report will come bundled with it? Will that be crystal report 2008? If yes, then in addition to this we will need Service pack 0 for it to be compatible with VS 2008.
Yes, Crystal Reports 2008 is the comparable Crystal Reports release to XI 3.0. Yes, you will need Service Pack 0 to allow Crystal Reports 2008 to be compatable with VS.NET 2008
NOTE: There currently is no Enterprise .NET SDK for XI 3.0. It should be out with Service Pack 1 of XI 3.0
Jason

Crystal Report 2011 compatibility with dot net 1.1

Hi,
WE have a .dot net application in framework 1.1 where we were using crystal reort 9. we are now upgrading to crystal reports 2011 .
1) is crystal reports 2011 runtimes compatable with dot net 1.1
2) Where can i find the runtimes for crystal reports 2011. for this i was ealier given a Visual studio 2010 crystal reports runtime. ths file was called CRRuntime_32bit_13_0_1.msi. but when i install this it has a readme file which says the following.
If you have installed Crystal Reports 2011 or any of the SAP BusinessObjects XI 4.0 products,
you may notice that their installation contains the same "Crystal Reports 2011" and "SAP
BusinessObjects Enterprise XI 4.0" folders as you see in this folder. Please note that the
folder/files names may be the same but most files have a different version, and are not
compatible with the Crystal Reports 2011 or SAP BusinessObjects XI 4.0 products.
the way i am reading this seems that the runtime i have is not the one i want for Crystal reports 2011
Thanks
Ravinder Akkaraju

A bit of a historical review;
VS2010 came out
We created a version of CR that integrates with VS2010. This is Crystal Reports for Visual Studio 2010 (v 13.x), also refered to as CRVS2010
At a later time CR 2011 was released. This version has no SDK.
However, any report created in CR 2011 can be run with CRVS2010, as well as the CR 2008 (v. 12.x) runtime.
As CRVS2010 is for VS2010 only, and VS2010 does not support framework 1.1, CRVS2010 does not support framework 1.1
If you want to use report create in CR 2011 with framework 1.1 based application, you will need to obtain CR 2008 which will install the correct runtime.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Windows 8 and itunes 11 compatibility with an ipod

I have itunes11 and Windows 8. I've called Apple and I've talked to Microsoft. This was months ago. I can download itunes and run it from my laptop but am unable to sync my ipod. I get an error and it automatically reboots my computer. I was told there were known compatibility with itunes and Windows 8. This was months ago.
I know how to downgrade itunes to XP or Win 7. This is not the issue. I can download to my laptop and place, it will not sync to my ipod device (which is a fear years old), but when I did talk to support I was told that it was supported. The ipod was not the issue.. It was the incompatibility between the programs.
I see recent updates in the support community in the past month about production resolution but this still has not resolved my issue. I don't believe purchasing a new ipod is going to resolve the issue either.
If anyone has successfully developed a workaround or recently downloaded itunes11 w/ Windows 8 and can sync to an apple ipod I would love to know how you did it.
Kia
[email protected]

Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

Is adobe photoshop cs2 compatable with windows 8?

Is adobe photoshop CS2 compatable with windows 8?

I have removed and re-installed CS2 twice now and still get the same library application error.
DO NOT INSTALL WINDOWS 8 ONTO YOUR COMPUTER IF YOU WANT TO KEEP CS2!
Telling us to spend more money to upgrade our software to meet OS does not show trust to the users. CS2 should be able to work with new OS systems and if not users should be allowed to update their current program for free to be able to use it on the new OS.
Thank you,
Eric

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

I have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?

i have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?
i had the facebook app but i could never upgrade it and i was ok with using the outdated version but when i reset the ipod so i could gift it to a friend it obviously got rid of the app and now i cant downloaded because it says its not compatable, how can i download the version i had before i reset it?

Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

Itunes 9.1 not compatable with XP?

Tried to download 9.1 and keep getting error message that says: The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. Continuing installation of this software may impair or destabilize operation of your system either immediately or in the future.
I have reboot computer several times, etc. Have never had a problem with any updates to itunes or iphone till now.
Thoughts?

Itunes 9.1 is definitely NOT compatible with Windows XP at this time. The culprit appears to be the Bonjour services package. I recently attempted to install via 3 methods: through Apple Update, via direct download over wireless and via direct download over wired connection. The result was the same in all three instances: when attempting to start itunes 9.1, it would immediately crash with a message "Itunes has encountered a problem and needs to close...". Upon checking the application event viewer (control panel > performance & maintenance > administrative tools > event viewer) I was able to determine that the itunes crashes were due to Bonjour in all but one instance. Bottom line: steer clear of itunes 9.1 until Apple gets their comparability issues corrected.

HELP printer compatability with computor.

Help...Have hp psc 1310 hp officejet 4200 series......Got a new gateway which is Vista and my old one was XP......my printer will print, but can not scan and tried to program the cd in again and computor would not accept it. Will I need to get a new printer that is compatable with Vista? Any thing to update of just have to get new?
thanks enhelder
Message Edited by enhelder on 07-07-2009 10:51 AM

Hello Highcountryhike,
Thank you for posting your request. You should have no issues updating to 10.10 Yosemite. Below are a couple links that should help.
If you run the Software Updates from the Apple Menu, to check for updates. Some have had issues not seeing updates, so simply click on "Store" from the top menu, and then click on Reload Page". Select to install HP Updates to ensure you have the latest drivers.
In some instances, the printer can be updated in the printer queue to resolve other issues, so check to make sure that the printer is listed with the HP Printer Series driver and not just AirPrint. System Prefernces/Printers & Scanners/ select your printer on the left and check on the right side under "Location:" that Kind: is the printer series. You can also click the "-" symbol to remove and then re-add the printer queue again, choosing the HP Printer series name to install the drivers.
Installing the Full Feature HP Printer Driver in OS X v10.10 Yosemite
Mac OS 10.10 Yosemite and HP Printer Support
Please post back with any further issues/questions.
Thanks,
Double-U-Dee
Don't forget to give Kudos where Kudos is Due - OR - if a Response Resolved your Issue, Click the "Accept as Solution"
I am an HP employee, but my posts and replies are my own and do not reflect the opinion of HP.

Essbase Studio v11.1.x compatibility with Essbase v9.3.1

Similar Messages

Maybe you are looking for