Esso logon manager client - Application List Blank

Hi
I have a scenario where the esso logon manager anf provisioning gateway clients are installed on the D drive of a client pc.This is due to the fact that a new batch of HP laptops have their system partition as C drive and their windows partion as the D Drive. So applications are automatically forced to install to the D Drive instead of the C drive as per default.
Upon rebooting the machine after installing the packaged esso msi packaged apps the esso application list is blank ?? However if the packages are installed to the C drive on another machine esso works fine.
Are there any tweaks or hacks or any solution to get this to work.
Your help would be greatly appreciated
Minesh

Check your Global Agent Settings. Specifically, I would check the one related to your synchronizer. This is a setting that exists in the registry of the client that points to the location of the dll file that it uses to do its synchronization with your chosen repository. You can find this setting in the Administrative Console under Synchronization-->[Synchronizer Name]-->Required-->Extension Location
There are some other DLL extension files that could be explicitly defined as well in the Global Agent Settings, I would go through your values and ensure they are set to the correct values, but the specific DLL that is preventing you from seeing templates is the one under your Synchronizer.

Similar Messages

  • Problem with the agent console created in the ESSO-Logon Manager 64 bits

    Friends,
    When I use the installer that I created in the console ESSO-Logon Manager for 32-bit, this I install it on the client side and when I synchronize with the console-Logon Manager ESSO brings me and I can see the agent all the templates I configured.
    I have a problem with the agent console created in the Logon Manager ESSO-64bit.
    When I use this installer on the client stations and then by the agent does not envision the applications that I have configured in the console.
    This causes you can not do single sign on to applications that I have configured in the client stations
    To generate this installer use the source name: ESSO-LMx64.msi
    Can someone please help me with this problem, this only happens when I use the msi installer on 64-bit client stations.
    Thanks.

    Jackson_Bill wrote:
    What IDE are you using and what platform?Read first.
    Moh Bob wrote:
    I'm using J2ME platform SDK 3.0
    db

  • ESSO Logon Manager not working with FireFox 3.5

    Hi,
    I am using Oracle ESSO Logon Manager (v.10.1.410) but it's not detecting my FireFox 3.5.3 browser.
    I am not able to Login using Logon Manager to any of web sites while browsing using FF3.5+
    regards,
    S.Vasanth Kumar.
    Edited by: vasanth.s.kumar on Oct 6, 2009 12:37 PM

    Hi,
    this is planned for a future release of Logon Manager. Currently 3.0 is the highest version supported.
    There is an enhancement request (8652660) logged for support of FF3.5
    Regards

  • [eSSO] Logon Manager doesn't autostart on Windows 7.

    I have installed the last Logon Manager version for my Windows 7, but I discovered that the application doesn't start automatically as Windows startups. I tried putting it under the Startup folder, but the results are the same. I also installed it in another Windows 7 of the company, and the scenario is the same. In other company's workstations (with XP), LM works fine (it startups with Windows).
    Anybody know if this is some bug with Windows 7?

    Hi
    ESSO-LM is designed to start up at user logon and is initiated in a Windows 7 Logon with the "userinit" registry key located at;
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
    The value of this key on a Windows 7 (64bit in this example) machine should have the following in the string somewhere - "C:\Program Files (x86)\Passlogix\v-GO SSO\wts\ssolauncher.exe" /startsso,
    If you select Windows v2 authenticator on install tghe installation should put this entry in automatically. If it is not present or is inhibited by a policy, for example, then ESSO will not start in the prescribed manner.
    It is possible to launch ESSO via an alternative method however the above is the designed method.
    Hope this helps

  • DAC Import Application List blank

    Hi,
    I am trying to import the Application List to DAC and the list is blank. Any idea why?
    Thanks!

    Anyone out there knows what is the step that causes the application list to be available for import from the DAC client? This is the step 4.9 "To import metadata into the DAC repository". I am not able to pick any application to import. Am I missing something?
    Appreciate any quick response.
    Thanks.

  • Oracle ESSO, Logon Manager Console couldn't connect to repository ORA-01017

    I installed Logon Manager Console on my Windows XP SP3 and try to connect to repository (Oracle DB 11g) with instanse name:
    Provider=OraOLEDB.Oracle;Data Source=MYDB;User Id=user;Password=password;
    Repository type: Oracle Database
    And get following error: ORA-01017: invalid username/password; logon denied
    But i can connect to database with sql developer. Same DB, user and password
    Please help, what i'm doing wrong?
    Edited by: LITBe on Sep 2, 2010 4:25 AM

    Update:
    If I attempt to connect with instanse name:
    Provider=OraOLEDB.Oracle;Data Source=myOESSO;User ID=system;Password=oracle;Integrated Security=no;
    Repository type: Oracle Database
    I get another error: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
    If
    instanse name: Provider=OraOLEDB.Oracle;Data Source=myOESSO;User ID=system;Password=oracle;
    Repository type: Generic Database
    I get another error: ORA-00942: table or view does not exist
    ORA-00942: table or view does not exist
    Maybe this help someone to understand what happening because i don't understand...

  • ESSO - Logon Manager Wizard Failed

    From any workstation, when we try to install LM, the last step of the wizard remains freezed for a long while and doesn´t return back (in the last step, we press the finish button and when we expect the AD Auth screen, is where the wizard crash). The LM is never installed but the weird thing is that we can see in AD, below the user, the container with the LM objects (and without the credentials objects).
    Help me!
    thanks!

    Hi,
    this is planned for a future release of Logon Manager. Currently 3.0 is the highest version supported.
    There is an enhancement request (8652660) logged for support of FF3.5
    Regards

  • ESSO LM Agent Capturing application credential problem

    Hi all,
    In my test environment Am having the following
    Oracle ESSO Logon Manager
    ESSO-LM Administrative Console Version 11.1.1.5.1
    IN Active Directory having two Organizational Units(OU) says
    ESS , IMS
    In both OU's am having 2 users.
    In ESS says <font color="red">essuser01, essuser02</font>
    and in IMS says <font color="red">imsuser01, imsuser02</font>
    Domain Name : example.com
    I have installed Admin Console in Windows 7 pro.
    and LM Agent have been installed in another system also having Win 7.
    In Left pane of my Admin console
    Under
    Global Agent Settings > Live > Synchronization > ADEXT
    Base Location for Configuration Objects sets to
    <font color="red"><li>OU=ims,DC=example,DC=com</li></font>
    <font color="red"><li>OU=ess,DC=example,DC=com</li></font>
    Location for storing user credentials sets to
    Under respective directory user objects
    Having Applications
    ESS_yahoo - For yahoo mail login
    IMS_Gmail - For Gmail login
    Have published ESS_Yahoo(Application) and Live(Global Agent Settings) to target repository
    OU=ess,DC=example,DC=com[example.com]
    Similarly,
    IMS_Gmail(Application) and Live(Global Agent Settings) to target repository
    OU=ims,DC=example,DC=com[example.com]Problem is while login as IMS or ESS users LM Agent is capturing both applications.
    Even I set
    Global Agent Settings > Live > User Experience > Application Response > Initial credential Capture > Limit response to predefined applications for
    All application Types & Web Applications set to
    <font color="blue">Predefined applications only</font>My need:
    For ESS users Agent must capture only Yahoo credentials,
    same as IMS user it must capture only Gmail not yahoo.
    What i have to do. Am newbie to ESSO.
    Response will be appreciated.
    Bala:)

    A few key element :
    In the admin console : Navigate to Global Agent Settings -> Live -> Synchronization
    Disable role/group security support.
    Note : Database Synchronization will not work with this option enabled
    Then :
    Navigate to Global Agent Settings -> Live ->
    Synchronization->DBEXT ->Required
    Specify the database servers with one of the following values:
    Provider=OraOLEDB.Oracle;Data Source=orcl;Extended
    Properties='OSAuthent=1';
    Provider=OraOLEDB.Oracle;Data Source=orcl;User
    Id=SYSTEM;Password=Manager1;
    orcl
    Then : Navigate to Global Agent Settings-> Live -> Synchronization
    -> DBEXT -> Advanced and enable Append Domain when naming objects
    To connect to the DB to distribute Application Use :
    Connection String : Provider=OraOLEDB.Oracle;Data
    Source=orcl;User Id=SYSTEM;Password=Password1;
    Repository Type : Generic Database
    Then you can deploy application the the DB, using the configure SSO support....
    Good luck

  • How can I rename the "name" on "Web Application List " page

     I have a quesiton need your kindly help . I'm novice in this field
    on "Central Administration" website
    "Administration management"--->"Sharepoint Web Application Management"--->"Web application list"
    here will show all of web application mapping information
    Name                                             URL
    SharePoint - 24824                          http://home:8081/
    SharePoint - 80                               http://home/
    SharePoint Central Administration v3   http://home:8080/
    I want to change "SharePoint - 24824" as "SharedServicePortal", how can do it

    Unfortunately by central admin UI you cannot change a web application name.
    So there are two ways to do this
    First as suggested above you have to delete web app and recreate again.
    2nd one you can use powershell script to modify webapp name as below
    $a=Get-SPWebApplication | where {$_.Name -match "Old web app name"}
    $a.Name
    $a.Name="New web app name"
    $a.Update()
    Get-SPWebApplication | where {$_.Name -match "New web app name"}
    Hope that's helps you.
    Regards
    Soni K

  • Esso Agents 11.1.1.2.0 with Legacy Logon manager and PG

    Hi
    I have many applications that fail on single sign-on.Although the eso services are started I have many pcs having to be re-installed because of esso not working. I have tried the troubleshooting methods on repair and un/re-installation of the esso software with no success
    The components I have currently installed are:
    1. Esso Server
    Logon Manager Console 10.1.410 (unpatched)
    Provisioning Gateway server 10.1.410 (unpatched)
    Microsoft ADAM repository on windows
    2. Windows XP esso Client
    Logon Manager Agent 10.1.410 (unpatched)
    Provisioning Gateway Client 10.1.410 (unpatched)
    My question is can I upgrade the clients to the latest version 11.1.1.2.0 now while having the Esso server version software remain the same. The upgrade of the Esso server will happen only during the latter half of the year.
    Will the esso clients still continue to work connecting to the legacy software on the esso server.
    We have a few sites that have been upgraded fully ( server and clients) to the 11.1.1.2.0 version and esso has been stable there ever since .
    Thanks
    Minesh

    This is an SSL handshake problem of Websphere - has nothing to do with AM.
    Websphere�s JDK does not trust the Signer / Cert of AM�s deployment container.
    Either configure a truststore (or use an existing webshpere truststore) where you import the Cert of the Signing CA of your AM DC�s cert.
    Other option - import the mentioned cert in cacert file of IBM JDK - but be aware that this might get lost when applying an Websphere fixpack/refreshpack.
    BTW what have you configured for server.port,server.host and server.protocol in your AMConfig.properties?
    If you have not changed that settings agent will use the port/protocol specified to communicate with AM.
    -Bernhard

  • How to generate an msi in Logon Manager ESSO

    Friends,
    How to create a msi in the administrative console logon manager to install it on a pc client to access automatic.
    Very grateful

    Hi
    In version ESSO-LM 11.1.1.5 the agent customised MSI can be created completely in the admin console.
    Copy ESSO-LM MSI from the original software, load it into the generate customised MSI wizard. Select the features you want including the correct synchroniser, select next, add the global agent settings set that you know function. Name the new MSI and generate.
    Run it with a command similar to this for a silent install:
    msiexec.exe /i "<install path>\ESSO-LM_XP_23Sepr11.msi" /qn
    Hope this helps
    S

  • [eSSO] Profiles in Logon Manager

    People!
    We have Logon Manager, and are going to make the custom MSI so we can deploy it through ZenWorks. The question is, we have three profiles of users (managers, users and builders). The first uses the entire pool of apps we included in Logon Manager. The second type uses a subset of these, and the third one, only 3 or 4 apps of the set.
    We generated several versions of the MSI with the configurations, but although each MSI reflect these profiles of people, when installed ALL users (belonging to the three profiles) have the entire set of apps in their LM app pool.
    The LM is using AD for storing credentials. Let me know how this can be done.
    Thanks!

    Hi Octavion,
    I am trying to connect MS AD which is on SSL from eSSO LM Manager.
    AD is running on 636 SSL port - this is already tested with Softerra LDAP Browser.
    I am getting connected on (SSL checked) 636 if I select "LDAP Compliant Directory" while connecting.
    It is ot getting connected if I choose "Microsoft Active Directory" from Drag Drop Repositories list.
    I am getting an error Service not Operational,iIf I provide IP Address of AD Server. If I provide Fully Qualified DOmain Name of LDAP Server I am getting an error "Log On Failure-Unknown Username or Bad Passowrd".
    - Mangesh

  • Java client application + SAP Logon Tickets (SSO)

    Java client application + SAP Logon Tickets (SSO)
    Hello
    I have the following question, it is about connection between SAP Enterprise Portal and Java Application.
    After registration in Enterprise Portal (with Internet Explorer Browser) request is passed on to SAP backend system - cFolders (SSO methode)
    With internet browser functioned everything.
    How can one get, however, this Logon tickets with Java application and then be of use later for SOAP connection
    (everything with client java application)
    Thanks for quick help
    Edo

    Hi Edo,
    look at this https://media.sdn.sap.com/javadocs/NW04/SPS15/um/com/sap/security/api/ticket/TicketVerifier.html
    Best Regards
    Oliver

  • Word opening in Client Application in SharePoint document library when feature is not activated in manage features in site collection

    Hello, I wish for all Word documents to open in the browser for my SharePoint document library on my team site.
    The feature 'open in client application' is not activated in Features for the site collection and the setting in the document library is set on 'Use the server default (open in the browser)
    When I select File > new> from the ribbon in the document library - it still opens Word in the client application?
    Any ideas on this?
    Is there a general Office 365 setting over riding SharePoint somewhere?
    Regards
    kegan1

    Okie don't open up a ticket. Can you please open internet explorer...See if its the latest version. Once you have done that can you login to the SharePoint site. Then go to the internet wheel option  in top right corner > select manage add on >
    Click on toolbars and extensions on left > then click on SharePoint open documents in client and disable it. Close the browser completely now for the changes to take effect. Open internet explorer once again and then try to go to site collection click on
    file and create new. The word will open up in browser now. This has to be done on each and every machine in your firm so that users will be able to open up only in browser. Out of the box there is only one way is to customize the ribbon and remove the new
    option from there or creating an all together new ribbon for your SharePoint from visual studio.

  • In cluster Manager there are no services and application listed on a node.. what does this mean?

    In Cluster Manager I can see two nodes listed.
    When I click on the first it lists the two SQL Server instances.
    On the other node there are no services and application listed....what does this mean?
    Mr Shaw

    Yes Instance A and Instance B will also be installed in the second node.
    Just go to configuration manager in the other node, you will see those instances in stopped state.
    Assume I install Instance A in a 2 node cluster with node A and Node B, it installs instanceA binaries in both nodes, What it does when failover is shutdown Instance A in Node A, move the disks to node B and start the instance A in the node B. Its basically
    the same instance.
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com
    Oh I get you.. 
    The missing bit on the puzzle is that the binaries are installed on both nodes at the same time.
    Thanks,
    Ben
    Mr Shaw

Maybe you are looking for