Establish a connection with the user peerID?

Hello ,
Know that a user's peerID, how to establish a connection with the user and send a message
With netGroup.sendToNearest (message, GroupAddress) do?
Seems to not realize?

You can simply publish to the RTFMP stream both are connected to. Ryan Stewart once came up with this: http://tv.adobe.com/watch/tech-talk-with-ryan-stewart/build-a-chat-application-with-adobe- stratus/
But besides you could of course only use a netgroup and send messages to neighbors with notifies.

Similar Messages

Why does itune keep telling me it could not establish a connection with the software update server

i have an iphone 3g running on 3.1.3 firmware and every time i plug into my pc running windows 7 it says that it is contacting the software update sever then after about ten seconds it says that update failed could not establish a connection with the server i have tried to disable my firewalls completely and it seems that nothing works nothing is wrong with the iphone it sync's properly and works fine someone plz help me so i can update

Everybody is tryng to connect to apple,s servers. Try tomorrow, it will be quieter

Establish a connection with the serial port on ST2510

Hello guys,
I have one question about connection on ST2510 with the serial port.
Is it possible to get the following command prompt during connection on ST2510 through serial port (as described in the document 820-0015-11):
"Enter password to access shell:"
instead of
"Enter password to access Service Interface (60 sec timeout):"
?

stapler wrote:
Thanks a lot,
...and how is it possible to get "Enter password to access shell:" instead of "Enter password to access Service Interface (60 sec timeout):" (wrong cable connection, etc.)?
I ask about it, because one guy said me, that he tried to establish a connection according to the document 820-0015-11.
But instead of "Enter password to access Service Interface (60 sec timeout):" he has got "Enter password to access shell:" and the default password kra16wen is incorrect.I won't indicate how to get "Enter password to access shell" because this is a special access as indicated in my previous post. However in order to get "Enter password to access Service Interface (60 sec timeout):" you need to press "S" (capital S) within 5 sec and then the password is "kra16wen".

Could not establish secure connection with server

Hi ,
We are not able to access our web service URL from Ipad Application on some of the network. We are receiving “could not establish secure connection with the server” message. We are able to access the same URL from other networks. Can you please suggest what can be possible Root cause and their suggested solution? We would appreciate your quick response..

hi Alfonso,
Editing the hosts file is easy. just need to use the CAS/CAM CLI and the vi test editor. You can google for instructions on how to use Vi.
To start assume we have a CAM and CAS with the hostname cam1 and cas1 respectively. the domain is mycompany.com and the ip addresses for the CAM and CAS is 192.168.10.1 and 192.168.15.2 respectively.
start with the CAM and view the hosts table
cat /etc/hosts
To check what domain u used to setup the CAM
cat /etc/resolver.conf
edit the hosts file so appears like so
192.168.10.1 cam1.mycompany.com cam1
192.168.15.2 cas1.mycompany.com cas1
Verify with 'cat /etc/hosts'
Make sure you can ping 'cas1' and 'cas1.mycompany.com' from cam1
Next edit the hosts file for cas1 so that it appears like so
192.168.15.2 cas1.mycompany.com cas1
192.168.10.1 cam1.mycompany.com cam1
Make sure you can ping 'cam1' and 'cam1.mycompany.com' from cas1
HTH
George

JMX Connectivity with the Adminstration Server - Weblogic 9.x

When using the java naming provider url in Managed Server startup script, or in server start tab when using node manager, or loading it from properties file (for deployment) we see below JMX Warning message in Managed Server startup log saying JMX connectivity exception with Admin Server. This is BUG in Weblogic 9.x release and there is CR open on this issue.
<May 19, 2009 10:35:25 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.149.181.55:20001
for protocols iiop, t3, ldap, http.>
<May 19, 2009 10:35:25 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManagedServer1_1
" for domain "wls923_domain1" running in Production Mode>
<May 19, 2009 10:35:25 AM EDT> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster
successfully. Log messages will now be broadcasted to the domain log.>
<May 19, 2009 10:35:25 AM EDT> <Warning> <JMX> <BEA-149509> <Unable to establish JMX Connectivity with the Adminstration
Server AdminServer at service:jmx:t3://AdminServer:20000/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.m
beanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:151)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:326)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnec
tion(RegisterWithDomainRuntimeService.java:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblog
ic.management.mbeanservers'; remaining name 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<May 19, 2009 10:35:26 AM EDT> <Notice> <Cluster> <BEA-000102> <Joining cluster Cluster1 on 239.192.23.2:7001>
- - Tarun

When using the java naming provider url in Managed Server startup script, or in server start tab when using node manager, or loading it from properties file (for deployment) we see below JMX Warning message in Managed Server startup log saying JMX connectivity exception with Admin Server. This is BUG in Weblogic 9.x release and there is CR open on this issue.
<May 19, 2009 10:35:25 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.149.181.55:20001
for protocols iiop, t3, ldap, http.>
<May 19, 2009 10:35:25 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManagedServer1_1
" for domain "wls923_domain1" running in Production Mode>
<May 19, 2009 10:35:25 AM EDT> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster
successfully. Log messages will now be broadcasted to the domain log.>
<May 19, 2009 10:35:25 AM EDT> <Warning> <JMX> <BEA-149509> <Unable to establish JMX Connectivity with the Adminstration
Server AdminServer at service:jmx:t3://AdminServer:20000/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.m
beanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:151)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:326)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnec
tion(RegisterWithDomainRuntimeService.java:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblog
ic.management.mbeanservers'; remaining name 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<May 19, 2009 10:35:26 AM EDT> <Notice> <Cluster> <BEA-000102> <Joining cluster Cluster1 on 239.192.23.2:7001>
- - Tarun

Can't establish a sftp connection with the finder

Hi, I'm trying to establish a sftp connection with the finder (using the "Connect to server" feature) between my (recently purchased) Mac Mini (mid 2011: i5, 2.3 GHz, 2 GB, running 10.7.3) and a Debian Testing box and I can't, I get the following error:
'There was a problem connecting to the server "ip.address"
This file server will not allow any additional users to log on. Try to connect again later.'
However if I try establishing a connection from the terminal (either ssh or sftp) it works flawlessly:
SSH:
victoria:~ RonIn$ ssh [email protected]
[email protected]'s password:
Linux clementine 3.0.0-1-486 #1 Sat Aug 27 15:56:48 UTC 2011 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
You have new mail.
Last login: Sat Apr 28 21:52:18 2012 from ukamy.local
ronin@clementine:~$
SFTP:
victoria:~ RonIn$ sftp [email protected]
[email protected]'s password:
Connected to ip.address.
sftp>
I've searched for a fix or alternative on the internet and I haven't found one that works; The one that keeps coming up is to try: "ftps" as the protocol instead of "sftp" with the remaining information the same (it doesn't work, it gets the same error message afterwards).
The IP address and login information works (corroborated by the fact that I can log in from the terminal from the Mac Mini) so the only issue is with the finder capabilities for establishing the connection. I have looked for apple related documentation or How Tos but I haven't found anything useful.
I don't want to use any third party app or tweak because of the sensitive information that is going to be transfered, I would like to be using strictly the tools from the OS.
If you need any more information please let me know, any help is deeply appreciated.

I have the same issue although i kind of fixed it. I have two admin accounts and one of the account's safari did the same thing as yours, except, it was the startpage and everypage i tried to visit. I reseted safari, as in the erase all data safari in the toolbar, safari-Reset Safari... But safari still didn't work. I logged out and went to my other account and opened safari. Now it works fine on both accounts. This meant safari had to logout before actually working better. I have this a few times these days.

SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme

Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type:        Error
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              17806
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type:        Failure Audit
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              18452
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

JDBC receiver error Cannot establish connection with the registered driver

Hi Expert,
I am constructing a proxy to JDBC scenario. And I am getting error saying "
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection with the registered driver. oracle.jdbc.driver.OracleDriver returns: The Network Adapter could not establish the connection. : SQLException: The Network Adapter could not establish the connection"
I can get into my Oracle database using TOAD with same IP address, user name and password. Could anybody tell me what should I do? Thanks a lot!
Charles

Hi,
Check with your network team, network conenction between PI and Data base not working , Network team have to open Data base system ports inorder connect PI System.
check with Basis team about network connectivty,like they are bale to ping Data base server ip or not.
please go through below thread,
SQLException: Io exception: The Network Adapter could not establish the con
regards,
ganesh.

I used to be able to email photos from my Lightroom software quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoi

I used to be able to email photos from my Lightroom software 5.7 for MAC quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
I have been trying to get help from Adobe for 3 days. I have sent a message through "Get Support", 2 days ago, but no one has contacted me. I have tried by phone, but no one will help me. When I purchased Lightroom in May, 2014, I was able to receive phone help. I am now told that I don't qualify because I am not a Creative Cloud customer. I have been assigned a case number 186291729.
PLEASE HELP ME FIX THIS PROBLEM

I, too, have this problem. I see no one is responding with a solution? Hello? Can someone please advise?
Oh, and, yes, I have manually verified repeatedly that the information I gave to Lightroom is correct, and I still get the same error message when I try to validate.

How to establish connection with the outgoing email server?

Cannot set up Lightroom 5 email capability with Google Mail. Have confirmed proper smpt address, email and password and error message still comes up:
"eFailed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
How can I clear this up. Help, Adobe!

Have you checked your Gmail in-box? See if this helps:
https://forums.adobe.com/thread/1642613

Whenever I go to webpages there are a few that come up with: "Unable to connect Firefox can't establish a connection to the server.."? What do I do?

Whenever I go to some websites there are a few that come up with: "Unable to connect Firefox can't establish a connection to the server.." and the problem occurs with the same websites on other browsers. What might be the problem?

If you get the same problems with two browsers, the problem is
outside of them. Check you computer for blocking programs.
Separate Issue;
Your System Details shows;
Installed Plug-ins
Shockwave Flash 15.0 r0
Shockwave Flash 16.0 r0
Having more than one version of a program may cause issues.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash Player '''v16.0.0.257 https://www.adobe.com/products/flashplayer/distribution3.html'''
http://www.ehow.com/how_11385212_troubleshoot-reset-connection-firefox.html
https://support.mozilla.org/en-US/kb/server-not-found-connection-problem

Firefox says it can't establish a connection with any website I try I uninstalled and reinstalled it and get the same message

firefox says it can't establish a connection with any website I try. I uninstalled and reinstalled it and get the same message .tryed running it with the addons diabled that didn't work. so I uninstalled it again this time uninstalling all the settings and addons too. reinstalled it and got the same message.

See:
* http://kb.mozillazine.org/Error_loading_websites

Time Machine - Problem with establishing a connection to the server

Using LionMac OS X Version 10.7 and when attempting to setup Time Machine to make backupto my ReadyNas Duo, the setup fails and I receive the following message(translated from Danish):
“There wasa problem with establishing a connection to the server ”SERVERNAME”.
The versionof the server that you attempt to establish connection to, is not supported.Contact the system administrator to solve the problem.”
Any ideasfor a solution?

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

Excel SSAS Tabular error: An error occurred during an attempt to establish a connection to the external data source

Hello there,
I have an Excel report I created which works perfectly fine on my dev environment, but fails on my test environment when I try to do a data refresh.
The key difference between both dev and test environments is that in dev, everything is installed in one server:
SharePoint 2013
SQL 2012: Database Instance, SSAS Instance, SSRS for SharePoint, SSAS POWERPIVOT instance (Powerpivot for SharePoint).
In my test and production environments, the architecture is different:
SQL DB Servers in High Availability (irrelevant for this report since it is connecting to the tabular model, just FYI)
SQL SSAS Tabular server (contains a tabular model that processes data from the SQL DBs).
2x SharePoint Application Servers (we installed both SSRS and PowerPivot for SharePoint on these servers)
2x SharePoint FrontEnd Servers (contain the SSRS and PowerPivot add-ins).
Now in dev, test and production, I can run PowerPivot reports that have been created in SharePoint without any issues. Those reports can access the SSAS Tabular model without any issues, and perform data refresh and OLAP functions (slicing, dicing, etc).
The problem is with Excel reports (i.e. .xlsx files) uploaded to SharePoint. While I can open them, I am having a hard time performing a data refresh. The error I get is:
"An error occurred during an attempt to establish a connection to the external data source [...]"
I ran SQL Profiler on my SSAS Server where the Tabular instance is and I noticed that every time I try to perform a data refresh, I get the following entries:
Every time I try to perform a data refresh, two entries under the user name ANONYMOUS LOGON.
Since things work without any issues on my single-server dev environment, I tried running SQL Server Profiler there as well to see what I get.
As you can see from the above, in the dev environment the query runs without any issues and the user name logged is in fact my username from the dev environment domain. I also have a separated user for the test domain, and another for the production domain.
Now upon some preliminary investigation I believe this has something to do with the data connection settings in Excel and the usage (or no usage) of secure store. This is what I can vouch for so far:
Library containing reports is configured as trusted in SharePoint Central Admin.
Library containing data connections is configured as trusted in SharePoint Central Admin.
The Data Provider referenced in the Excel report (MSOLAP.5) is configured as trusted in SharePoint Central Admin.
In the Excel report, the Excel Services authentication settings is set as "use authenticated user's account". This wortks fine in the DEV environment.
Concerning SecureStore, PowerPivot Configurator has configured it the PowerPivotUnnattendedAccount application ID in all the environments. There is
NO configuration of an Application ID for Excel Services in any of the environments (Dev, test or production). Altough I reckon this is where the solution lies, I am not 100% sure as to why it fails in test and prod. But as I read what I am
writing, I reckon this is because of the authentication "hops" through servers. Am I right in my assumption?
Could someone please advise what am I doing wrong in this case? If it is the fact that I am missing an Secure Store entry for Excel Services, I am wondering if someone could advise me on how to set ip up? My confusion is around the "Target Application
Type" setting.
Thank you for your time.
Regards,
P.

Hi Rameshwar,
PowerPivot workbooks contain embedded data connections. To support workbook interaction through slicers and filters, Excel Services must be configured to allow external data access through embedded connection information. External data access is required
for retrieving PowerPivot data that is loaded on PowerPivot servers in the farm. Please refer to the steps below to solve this issue:
In Central Administration, in Application Management, click Manage service applications.
Click Excel Services Application.
Click Trusted File Location.
Click http:// or the location you want to configure.
In External Data, in Allow External Data, click Trusted data connection libraries and embedded.
Click OK.
For more information, please see:
Create a trusted location for PowerPivot sites in Central Administration:
http://msdn.microsoft.com/en-us/library/ee637428.aspx
Another reason is Excel Services returns this error when you query PowerPivot data in an Excel workbook that is published to SharePoint, and the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis
Services (PowerPivot) service is stopped. Please check this document:
http://technet.microsoft.com/en-us/library/ff487858(v=sql.110).aspx
Finally, here is a good article regarding how to troubleshoot PowerPivot data refresh for your reference. Please see:
Troubleshooting PowerPivot Data Refresh:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
Hope this helps.
Elvis Long
TechNet Community Support

XE error - "can't establish a connection to the server at 127.0.0.1:8080"

I installed XE on my laptop, os windows xp prof. v2002 sp2.
Database works fine, I can access with sql command line.
But can not access to database home page and apex.
Tried both links with both IE and Firefox;
http://localhost:8080/apex
http://127.0.0.1:8080/apex
Same error I get; "can't establish a connection to the server at 127.0.0.1:8080."
SQL*Plus: Release 10.2.0.1.0 - Production on Cmt Kas 17 22:44:04 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
Connected.
SQL> SET SERVEROUTPUT ON;
SQL> select dbms_xdb.gethttpport, dbms_xdb.getftpport from dual;
GETHTTPPORT GETFTPPORT
       8080          0
SQL> DECLARE
2      l_dad_names DBMS_EPG.varchar2_table;
3 BEGIN
4      DBMS_OUTPUT.put_line('DADs');
5      DBMS_OUTPUT.put_line('==========');
6
7      DBMS_EPG.GET_DAD_LIST (l_dad_names);
8
9      FOR i IN 1 .. l_dad_names.count LOOP
10        DBMS_OUTPUT.put_line(l_dad_names(i));
11      END LOOP;
12   END;
13 /
DADs
==========
APEX
PL/SQL procedure successfully completed.Any comments will be great, thank you.

Really thank you all for your support, but this time when I changed to hostname I experience TNS-12547 error as following;
D:\>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-KAS-2007 08:58:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is D:\oraclexe\app\oracle\product\10.2.0\server\network\ad
min\listener.ora
Log messages written to D:\oraclexe\app\oracle\product\10.2.0\server\network\log
\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=TC03540225.turkcell.entp.tgc)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 18-KAS-2007 08:58:30
Uptime 0 days 0 hr. 0 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File D:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Listener Log File D:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=TC03540225.turkcell.entp.tgc)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
D:\>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Paz Kas 18 08:59:32 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup force
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1288820 bytes
Variable Size 163579276 bytes
Database Buffers 432013312 bytes
Redo Buffers 2904064 bytes
Database mounted.
Database opened.
SQL> alter system register ;
System altered.
SQL> conn hr/hr@xe
ERROR:
ORA-12547: TNS:lost contact
Warning: You are no longer connected to ORACLE.
SQL> exit
D:\>tnsping xe
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 18-KAS-2
007 09:00:24
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
D:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = TC03540225.turkcell.entp.tgc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
TNS-12547: TNS:lost contact
D:\>ping TC03540225.turkcell.entp.tgc
Pinging TC03540225.turkcell.entp.tgc [169.254.121.46] with 32 bytes of data:
Reply from 169.254.121.46: bytes=32 time<1ms TTL=128
Reply from 169.254.121.46: bytes=32 time<1ms TTL=128
Reply from 169.254.121.46: bytes=32 time<1ms TTL=128
Reply from 169.254.121.46: bytes=32 time<1ms TTL=128
Ping statistics for 169.254.121.46:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
D:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\log\listener.log ->
Started with pid=5796
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=TC03540225.turkcell.entp.tgc)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
18-KAS-2007 08:58:31 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=TCHASYILMAZ))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
18-KAS-2007 08:59:41 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
18-KAS-2007 08:59:41 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
18-KAS-2007 09:00:12 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
18-KAS-2007 09:00:18 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
18-KAS-2007 09:00:24 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
18-KAS-2007 09:01:12 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
18-KAS-2007 09:02:15 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client

Establish a connection with the user peerID?

Similar Messages

Maybe you are looking for