Ethernet has stopped working after installing "Security Update 2010-003"

I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange". The wifi still works.
Has this happened with anyone else? I am curious as to how I can either uninstall the update or make the ethernet work again..
Much thanks for any recommendations you may have.

Hussain Ameen wrote:
I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange".
Welcome to Apple's discussion groups.
I'm not having that problem after installing the security update.
If you open the Network panel of System Preferences and select the Ethernet connection item, is it set to "Configure" "Using DHCP"? Do you see reasonable values for "IP Address", "Subnet Mask", "Router", and DNS Server"?

Similar Messages

HT201366 CAC readers not working after installing security update 2013-003?

Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

For CAC issues, see:
MilitaryCAC's Mac OS X support landing page
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Applications crashing after installing security update 2010-003

Hi all, anyone else having this problem (and found a solution)? After installing security update 2010-003 on snow 10.6.3, entourage, firefox, and even itunes are crashing at launch. Safari seems stable, but haven't tried other apps yet. Verified permissions on my boot disk and repaired it but the problem persists. It started after rebooting after installing the security update. I'll reinstall the OS if needed but hoping this is a bug someone has solved. Thanks!

http://www.thexlab.com/faqs/multipleappsquit.html

HP Power Advisor has stopped working after installing latest updates

I have been using HP Power Advisor successfully on my Lenovo X230 running Windows 7. After installing the latest Power Advisor updates it no longer works. I can select a voltage from the dropdown on the Input Voltage screen but nothing happens when I click on the Go button, as if it is disabled. I've tried re-installing the download package which works fine but it stops working again as soon as I install the latest updates. Any ideas how to solve this?

Well on the website for HP power Advisor, it specifically says,
"Accurately estimate power consumption of your HP server and storage products"
There could be many different things interrupting your use of the program, but I'm going to say that maybe your largest problem with using the HP software designed for HP machines is your Lenovo.
Sorry,
Good Luck!
Did I help you? Please give me a Thumbs up to help let others know!

Mac mini server won't reboot after Installing security update 2010-003

This has already been posted and remaines "unanswered".
After updating to Snow Leopard Server 10.6.3 and attempting to reboot, the mac mini (HDMI) hangs on the gray apple logo with progress spinning. It takes me several times to force the mac mini to power down and try again, before it finally loads the login screen.
any suggestions?

Odd.
So it's hanging while starting services, it looks like, the firewall in particular, have you tried a safe boot?
If not, hold down the shift key right after you hear the power-on chime, keep holding it till you see a spinning gear.
This boots up without extra kernel extensions and fonts, clears font caches, and runs a disk verify and a repair if needed. If you still can't boot reliably in safe mode, you may need to run an archive/install.

Problem after install Security Update 2011-003

hi
after after install Security Update 2011-003
i can't open App like mail, safari and more.
any idea
Benny

Process:         Safari [400]
Path:            /Applications/Safari.app/Contents/MacOS/Safari
Identifier:      com.apple.Safari
Version:         ??? (???)
Build Info:      WebBrowser-75332101~1
Code Type:       X86 (Native)
Parent Process: launchd [212]
Date/Time:       2011-06-01 02:54:16.134 +0300
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Reason: no suitable image found. Did find:
          /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore. framework/Versions/A/WebCore: truncated fat file. file length=12320768, but needed slice goes to 35270944
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <39AC3185-E633-68AA-7CD6-1230E7F1CEF4> /usr/lib/dyld
q

HT1222 My internet speed has slowed to a crawl after installing security update 2015-003. Any ideas on how to fix?

I have a mini mac with 8GB ram and running yosemite OS. I recently installed security update 2015-003 and now my internet connectivity have slowed to a crawl. sometimes if I turn wi-fi off and then back on the speed returns to normal but sometimes it does not. Any ideas what may be causing the slow internet speed?

Please check the speed of your connection on this site.
Then start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Check again. Then restart as usual and post the results.

"Mobile Device helper has stopped working" after installing most recent

OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
_*Steps I have taken :*_
I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
*The two messages that I continue to get when I open iTunes and connect my phone:*
1) "Mobile Device helper has stopped working"
2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
The most recent error message under "Problems Reports & Solutions" on my start menu read:
Product: MobileDeviceHelper
Problem: Stopped working
Date: 4/7/2010 3:42 PM
Status: Not Reported
Problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application Version: 16.691.14.1
Application Timestamp: 4ba3b8fe
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.17.21
Fault Module Timestamp: 4b8cb530
Exception Code: c0000005
Exception Offset: 0000db6b
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
This is the same message that I have received the last 10 times under Mobile Device Helper.
*Please PLEASE please*, does anyone know how to resolve this problem?
*Thank you SO MUCH for any insight.*
-signed, UGH!!!

Hi,
I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
Really frustrating and disappointing.

After installing Security Update 2010-006...

Hey guys,
After I run the Software Update and security update 2010-006 is installed,
the wifi service of my macbook is not working.
It cannon to any wifi network and also sometimes no network can be found.
What can I do?

Cheong! wrote:
After I run the Software Update and security update 2010-006 is installed,
the wifi service of my macbook is not working.
You might try resetting your connection settings using the steps listed in this message:
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
They're not guaranteed to solve the problem, but they'll only take a minute or so to try.
If those don't help, I'm not sure I have any other advice.

Clamd fails after installing Security Update 2010-004

A few months ago while running clamav-0.96, I began to get "Assertion failed" notices in my system log. But I applied a PowerPC patch available at clamav.net and that solved the problem. Later on, I updated to clamav-0.96.1 and everything continued running fine until yesterday when I installed Apple's Security Update 2010-004. Now I'm seeing the "Assertion failed" messages in my system log again just about every 10 seconds:
Jun 17 07:55:17 nagxserveg5 net.clamav.clamd[686]: Assertion failed: (ResultPtr
= -(1 << 23) && ResultPtr < (1 << 23) && "Relocation out of range!"), function
relocate, file llvm/lib/Target/PowerPC/PPCJITInfo.cpp, line 399.
Jun 17 07:55:19 nagxserveg5 ReportCrash[705]: Formulating crash report for
process clamd[686]
Jun 17 07:55:19 nagxserveg5 ReportCrash[705]: Saved crashreport to
/Library/Logs/CrashReporter/clamd2010-06-17-075517NAGXServeG5.crash using
uid: 0 gid: 0, euid: 0 egid: 0
Jun 17 07:55:19 nagxserveg5 com.apple.launchd[1] (net.clamav.clamd[686]):
Exited abnormally: Abort trap
Jun 17 07:55:19 nagxserveg5 com.apple.launchd[1] (net.clamav.clamd): Throttling
respawn: Will start in 1 seconds
I tried reinstalling clamav-0.96.1 (configure/make/make install) and
rebooted, but that didn't help. And attempting to reapply PowerPC patch, I just
get the message that the patch is already applied. I have had to turn off virus scanning in ServerAdmin/Mail service in order to send/receive any mail. Otherwise, everything fails in virus scanning and just ends up sitting in my Mail Queue.

Yes, but you also mentioned that you tried to apply the patch which is not needed
Looks like a freshclam update broke things then. Until they reliably sort it, you can safely rebuild ClamAV using --enable-llvm=no or --disable-llvm (don't remember which one is correct off the top of my head).

Web Sharing not working after installing security update

I have been using Web Sharing without problems for several months, but now, after installing the latest security update, my browser cannot find my server at macbook.local.
The console error messages read:
10/15/08 11:35:17
AM org.apache.httpd644
httpd: Syntax error on line 455 of /private/etc/apache2/httpd.conf: Syntax error on line 15 of /private/etc/apache2/extra/httpd-userdir.conf: Syntax error on line 8 of /private/etc/apache2/users/+entropy-php.conf: Cannot load /usr/local/php5/libphp5.so into server: dlopen(/usr/local/php5/libphp5.so, 10): no suitable image found. Did find:\n\t/usr/local/php5/libphp5.so: no matching architecture in universal wrapper
10/15/08 11:35:17 AM
com.apple.launchd[1]
(org.apache.httpd644) Exited with exit code: 1
I have read a number of other posts (and searched a bit on Google), but nothing I found seems to address this particular console error message.
What should I do?

This page fixed the problem. For me this is the part that I had to run:
Problem 2: Apache is 64 bit, entropy is 32 bit.
The only solution to this that I've seen is to force Apache to be 32 bit. For intel based machines:
Code:
sudo cp /usr/sbin/httpd /usr/sbin/httpd-fat
sudo lipo /usr/sbin/httpd -thin i386 -output /usr/sbin/httpd
that will strip everything except the 32 bit intel code from httpd (after making a backup), forcing it to be 32 bit. For PPC, the command will be similar.
This fix is a bit tacky, but shouldn't cause any problems.
After running this everything worked as normal. Thanks to everyone that helped.

2010 Mini superdrive has stopped working after Mountain Lion update - anyone else?

After updating to 10.8 the superdrive on my 2010 mini has completely stopped working. It will not accept any disks. Disk Utility sees the drive as a working drive. Anyone else having this issue? If yes and you've resolved it, how??

Same thing happened to me with Mountain Lion. It seems that at the moment there's no solution. I've tried to burn a DVD with Toast Titanium, iDVD and the SimplyBurn. All of them failed.
It's a shame that Apple did this because we pay for a computer with a drive that could burn DVD discs. I´m very, very disappointed with Apple!

Time capsule stopped working after installing software update, no lights and reset did nothing. What do I do?

I can't get my time capsule to turn on after a software update. Reset button does nothing and it is pluged in to a live outlet. Is my time capsule dead?

Welcome to Apple Discussions, Freepisces
I have all the latest updates on my Macs, and I have no problem at all.
If you applied the latest (7.4.1) QT update, your problem may be due to the fact that the System Requirements for QuickTime 7.4.1 for Tiger include Mac OS X 10.4.9 or later, and you show that you are using Mac OS X (10.4.3). You can check which QT version you have installed using the QuickTime Player > About QuickTime Player menu command.
If your QT version is an older one that is compatible with your Mac OS, and if you have not done so since you applied the QT update, repairing permissions may help you.
If the problem is somehow related to your iSight rather than to your QT software, Apple's How to Troubleshoot iSight may help you identify and fix your problem.
Unless you have a compelling reason for not doing so, you should consider updating to the latest version of Tiger (10.4.11). To find out what improvements you are missing by staying with 10.4.3, see some of the "About the Mac OS X 10.4.xx Update" documents for updates later than 10.4.3. A couple of examples are:
• About the Mac OS X 10.4.6 Update (combo) and
• About the Mac OS X 10.4.11 Update
If you are interested, other "About..." documents are linked in this search list.
Because System Requirements for the latest combo applicable to your MacBook, Mac OS X 10.4.11 Combo Update (Intel), are for Mac OS X 10.4.4 or later, you will need at least two steps to upgrade from your Mac OS X (10.4.3), so pay careful attention to the System Requirements of any updates you plan to apply.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight

Secure Empty Trash Problem After Installing Security Update 2010-005

Some items in trash were locked, selected option to remove all items and nothing was deleted. Rebooted twice, no change. Unsecure empty trash works fine. Any ideas?

Hello, i have the same problem. After security update the Mailprogram is polling my imap accounts (which requires SSL) endless. My workarround was to install Thunderbird. TB did the job. Any solution?
thh001

HELP Spotify has stopped working after installing Mac OS X 10.10.3

Spotify keeps crashing since installing Mac OS X 10.10.3 yesterday. Unstalling and reinstalling again won't work...Does anyone know what I should do?The error message says "Check with the developer to make sure Spotify works with hte version of OS X. You may ned to reinstall the application. Be sure to install any available update for hte applicaion and OS X." ughhh

Hello there and welcome to the community,
Can you try to remove complety Spotify with the program ccleaner (you have to download it. It's a great tool, safe and working perfectly).
After it's done, you can download and reinstall Spotify with this link :
Mac: http://download.spotify.com/SpotifyInstaller.zip

Ethernet has stopped working after installing "Security Update 2010-003"

Similar Messages

Maybe you are looking for