Euipment or Function location field Mandatory in Work Order

Hi
How to make either Equipment or Function location ( either of the one) mandatory in Work Order.
Thanks ini advance
Thiyagarajan

Hi ,
The field equipment or f.loc can be made mandatory using transaction variants  -- but it would be applicable for all order types .....
1.use tcode SHD0 , give IW31 in Transaction code and ZIW31 in transaction variants and press create ..
2.this would take you to IW31 initial screen and enter planning plant and order types and press enter this would give the dialog box of screen variant .Here press continue and this would take you to inside screen .
3.Here you again press enter and by entering some required data you can finally reach to screen variant of reference object
and can mark the equipment or f.loc field mandatory as required .
4.Once this is finished you can you can select local object and save ... and come back and test the same ... now this trans varint ZIW31 can be assigned to user group ...
go thru the documentation of SHD0 for bette information
regards
pushpa

Similar Messages

  • Making Storage Location field mandatory in Work Order

    Hi
    As per our proces, if PR is created from work order and if there is no storage location in work order then PO will have warehouse address as a shipping address. So it is expected that PR must have storage location details when it is created from work order to avoid incorrect shipping address in PO.
    So, I want to make storage location field mandatory in components tab of work order.
    Also I want to avoid the users to deliberately removing the storage location and making it blank.
    Regards
    Prakash

    Hi,
      You will have to use one of the below mentioned user exits  to accomplsih this requirement.
    CNEX0026 Maintenance order: General check for material
    CNEX0027 Maintenance order: Determination of plant or storage location for component
    Thanks
    Narasimhan

  • Assign functional location to operations of work orders

    Hi PM experts,
    I want to assign a different funcional location to each operation of a work order.
    Is it possible??? How can I do that???
    Thanks in advance.

    Do the config in IMG => PM & CS => Maintenance & Service Processing => Maintenance & Service Orders => Functions => Define Notification & Order Integration
    There for your order type, Select Assignment of Technical Objects to Operations Active.
    Note: One operation can be assigned to only one functional location. If you want to assign one operation for 2 FLs, its not possible. You should define 2 different operations.
    In maintenance order, in Objects tab, select the FLs. Select first FL & click Assignment button at the bottom. In pop up window, you will get the list of operations. Select the operation & assign that for the FL.

  • How to display field Functional Location Field in Asset Master Data

    Dear Experts,
    I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
    I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
    I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
    Thank you
    Best regards,
    Frans

    Dear Frans,
    I am sorry this is not possible.
    Note 140482:
    The field was created as a precaution. However, it is not being used at 
    present and consequently is not supplied.                               
    In particular, you cannot use the field as a criterion for a selection  
    in Asset Accounting reporting. This is still true even if this field has
    been included in the selection view delivered for the dynamic selections
    by modification.                                                        
    regards Bernhard

  • Storage location field mandatory in PR

    Hi ,
    We want to make "Storage location" field mandatory in PR for  "_Document Type and Account Assignment" Combination._
    Like we have a PR document Type ZDM for raise a PR for materials, we want to make STORAGE LOCATION field mandatory if ACCOUNT Assignment in line item is BLANK.
    In case Account assignment is K then this field should be NON-MANDATORY and preferrably should be greyed out.
    Is there is any standard SAP settings for that
    Regards
    Shrey

    Hi,
    Use the user exit -> MEREQ001
    Hope the above helps.
    Regards,
    Vivek

  • Functional Location field is Grayed out in change mode

    Dear Experts ,
    I have created an equipment automatically  through serial number managed material .
    But the equipment created has no functional location assigned to it .
    Also when in change mode of the equipment the functional location field is grayed out & there is no provision to dismantle & reassign the same .
    Pls tell me how can i assign a functional loaction to this automatically created equipment ??
    Regards
    Anis

    Hello Thyagrajan ,
    In IMG ...
       Equipments --> Equipment Uasge Period --> Define Installation at functional Location
    I have put a tick for the checkbox " Inst . at Func. Loc" against the said equipment category
    Is ther anywhere else in IMG that i need 2 assign/check .
    while trying 2 assign a functional location for this equipment the system give the error :
    No InstallLocation entered: Data transfer not possible
    Message no. IA036
    Regards
    Anis
    Edited by: anis bazmi on Oct 26, 2009 9:48 AM

  • Activation of Function Location field in Fleet Objects

    Dear All
    In Fleet Management, the Function Location field is inactive by standard. How can we make the Function Location field active for usage?
    Regards
    BK

    hi
    For your equipment category mark the installation at functional location in T code OIEP
    regards
    thyagarajan

  • How to make all fields mandatory in sales order T- code VA01 initial screen

    Dear all,
    how to make all fields mandatory in sales order T- code VA01 initial screen itself
    The fields are
    Sales Organization
    Distribution Channel
    Division
    Sales Office
    Sales Group
    Regards,
    Amar Reddy

    Hi,
    You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
    [Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
    Regards,
    Phani Prasad

  • How to make tax classification field mandatory in sales order ?

    Hi,
    while creating sales order, " how to make tax classification field mandatory ".
    Please tell me the procedure.
    In tcode OVA2. what are the entries for fields,table.
    Regards,
    sapsduser

    Dear ,
    Could you please share why you want to make tax Classification field mandatory in sales order.
    Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
    Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
    While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
    Tax is calculated based on the ship to party.
    Hope this will help you.....
    Regards,
    Manoranjan.

  • Making a field mandatory in purchase order wrt account assignment

    Hi,
       I want to make a field mandatory in purchase order wrt a patricular account assignment category.Can any one of u help me?

    Hi
    Using a BAdi  you can acheive this.
    Create a New Field selction key with Order Acknowledgement as mandatory field
    The Business Add-In (BAdI) ME_PROCESS_PO_CUST enables you to extend the business logic of the Enjoy purchase order on an individual basis.
    Typical applications for this BAdI include:
    Processing of own objects
    Processing of additional data on standard objects
    Implementation of additional checks and derivations
    Change of data in standard fields
    Change in field selection
    Use one of the the methods
    Field selection At item level method FIELDSELECTION_ITEM_REFKEYS
    Special rules at item level method FIELDSELECTION_ITEM
    This method enables you to change the display properties of fields at item level by supplementing or swapping the field selection reference key. You can thus restrict the processing options for certain groups of users, for example.
    The following parameters are available:
    IM_ITEM
    This import parameter contains the item data of the outline agreement.
    The interface reference is of the category IF_PURCHASE_OUT_ITEM.
    CH_KEY0 to CH_KEY6
    These change parameters contain the field selection reference keys.
    Please go through the BAdi Document tation for more details
    Please take hepl of ABAP er in implementing the BAdi
    Thanks & Regards
    Kishore

  • Use of field 'StartPoint' in work order operation's 'Dates' tab

    Hi,
    Can someone please explain me on the uase of field 'StartPoint' on work order operation's Dates tab.
    Regards.

    Start point will be used in case of scheduling for the operation.
    By mentioning the condition & date, while doing automatic scheduling, system will change the start date of the operation & correspondingly finish date.
    Note: This will work only when Automatic scheduling is ticked for the control key.
    Regards,

  • Functional Location Field In AS02 (Time dependent)

    Hi All,
    I need to know if it is possible to add or show functional location in time-dependent tab(tcode AS02), because i found TPLNR(functional location) in table ANLZ. Fyi, ANLZ is the source table of time-dependent tab in tcode AS02.
    Really appreciate your help
    Thanks

    Dear:
              First see  layout assigned to your class through OAOA and then go to the path SPRO....Financial Accounting...Asset Accounting...Master Data....Screen Layouts...Define screen layout for master data...select layout...logical field group...select time dependent data...field group rules.. There you will find 89 (functional area)... Make its status optional or mandatory whatever you require.
    This will show the field in AS01 for data input.
    Regards

  • Making storage location field mandatory at contract level

    Dear All,
    I want to make the field storage location mandatory at contract level.Is there any configuration setting to make storage location mandatory at the time of contarct creation.
    please suggest.
    thanks in advance
    ravi k

    sapuser k 
    1. IMG --> SD --> BF --> Log of Incomplete Terms --> Define Incompleteness procedure (Double Click)
    Choose "A - Sales Header", Click New Entries, Create say 55 -  Contracts
    Click "New Entries", Enter Table = VEDA, Choose Field (Storage Location Field ) and Status.
    Click Save
    2. IMG --> SD --> BF --> Log of Incomplete Terms --> Assign Incompleteness Procedure
    Assign Procedure to sales document Types
    WK1 = 55
    Then Click save
    Regards
    Sathya

  • Equipment & Function Location Fields

    Hi All
    Can any one help me out.
    Fields Equipment and Function Location are not refelecting in operation tab of general task list..in my Dev system
    but when i test the same in IDES its refelcting there
    I try to sort out this issue via Task List Field Selection.. but still helpless.. couldn't find these fields here also to make it unhide.. 
    Thanks in advance
    Regards
    AK

    Hi Kapil,
                 As I know there is no field for Equipment or FLock, as this is the general Task List and can be used in any Equipment.
    If you are using IA05, there wont be any Equipment or FLock field in the same.
    In IA01 you can Definitely find the same as this is the Equipment Specific Task List.
    and IN IA11 you can find the field for the Functional Location.
    Please check again.
    Regards,
    yawar Khan

  • Need to Make end customer field mandatory in sales order form.

    I need to make end customer field mandatory when sales channel entered as some value...
    for this i have used when validate record on order form
    when i enter a value in sales channel as desired value the form is getting saved automatically and the field is getting mandatory
    but my requirement is to make field mandatory and then to save the order.
    let me know the sequence how it works if any one knows.

    Sanni,
    >
    when i enter a value in sales channel as desired value the form is <b>getting saved automatically</b> and (then) the <b>field is getting mandatory</b>
    but my requirement is to make field mandatory and then to save the order.
    >
    Which trigger are you using to do the "getting saved automatically'?
    Does this trigger fire before the trigger that is making the field mandatory?
    Regards,
    PS: Is this an Oracle EBS query? If yes, this is the wrong forum
    Edited by: Prabodh on Jun 14, 2012 4:48 PM

Maybe you are looking for