Evaluate the performance of EHP4 upgrade

Hello All,
We are upgrading our ERP 6 Systems to EHP4.
The process is going on smoothly in our landscape.
I want to know the tools/ utilitys/ support available to evaluate and analyse how did the upgrade went off? Was it perfromed as per the SAP' s best practices, was there any lapses in the upgrade process.
Any directions/ pointers welcome.
Thanks,
Antar

ENHp4 has been imporved much since it was released. EHP Installer is constantly updated to improve performance and fix any errors in the previous version of the installer.
If you really want to analyze this, test it on different system with different settings such as number of parrallel processes, tp process etc.,
You performance will also be determined by the version of R3trans you use.
Thanks!

Similar Messages

  • /ASU/UPGRADE after the ECC6.0 EHP4 upgrade Finalization step

    Hello all,
    Needed some information on the ASU step in Postprocessing phase of the upgrade. We are upgrading form 4.7 to ECC 6 EHP4 and we are in the Postprocessing phase. The current step is to perform the /ASU/UPGRADE, and I wanted to know if I need to stop te upgrade to perform this step or I can proceed with the rest of the Post processing and Finalization phase and still do the /ASU/UPGRADE step. Please advice ASAP.
    Thanks
    Deepak

    Hello,
    we are in upgrade to ECC 6.0 EHP4 too and now at phase ASU/UPGRADE.
    Note 1000009 advices to make adjusments in client 000, but we are working in client 100. And the procuced task list is client-dependent. So things like budget period or wage types are usually in working client.
    Which is the correct client to use?
    Regards,
    Julia

  • Poor System performance after EHP4 upgrade

    Hello Experts,
    We have just finished our Upgrade to EHP4 for ECC6 system. After the upgrade we are noticing awfully slow system response time.
    My SGEN is currently executing and it's showing another 45 hours before it is finished.  Are there specific post Upgrade activities that I am missing? Once I try to perform some action it takes ages to compile the program. I undesratand that since SGEN is not run yet so it will need some time to compile and generate load for the application but still the response is takinng agaes before I see the actual Application/Program active in GUI.
    Please suggest what I can do to boost up my system performance.
    Thanks,
    M

    Hi Sunny,
    Another Update
    I looked at SAP Note 146289 - Parameter Recommendations for 64-Bit SAP Kernel
    Following is the recommnedation:
    Implement the SAP profile parameters as follows:
    em/initial_size_MB 1024 up to 1TB (note 835474)
    em/blocksize_KB 2048, 4096 or 8192 (note 835474)
    ztta/roll_first 1
    ztta/roll_area 6500000
    The deafult value of the following parameters is 2000000000 (2GB).
    They can be changed depending on the HW (RAM) and the configured
    SWAP Space:
    ztta/roll_extension 2000000000 (2GB)
    abap/heap_area_dia 2000000000 (2GB)
    abap/heap_area_nondia 2000000000 (2GB)
    abap/heap_area_total 2000000000 (2GB)
    But same SAP Note refers for windows:
    For Windows 64Bit recommendations see note 88416:
    As per this note recommendations are as follows:
    Standard values for zero administration memory management
    [HS] = size of the physical main memory
    [PM] = value of the profile parameter PHYS_MEMSIZE (standard value=[HS])
    [BE] = maximum possible number of users (calculated from [PM])
    Profile parameter
    Standard 32-bit
    Standard 64-bit
    Unit
    em/initial_size_MB
        [PM]
        [PM]
    Mbyte
    ---    em/max_size_MB
    ---    20000
    ---   100000
    Mbyte
    em/address_space_MB
        512
       4096
    Mbyte
      ztta/roll_first
        1
        1
    Byte
    ---    ztta/roll_area
    ---  2000000
    ---  3000000
    Byte
    ztta/roll_extension
    2000000000
    2000000000
    Byte
    abap/heap_area_dia
    2000000000
    2000000000
    Byte
    abap/heap_area_nondia
    2000000000
    0
    Byte
    abap/heap_area_total
    2000000000
    [PM]*1048576
    Byte
    -    rdisp/ROLL_MAXFS
    [BE] * 100
    [BE] * 100
    8KB Block
    ---    rdisp/ROLL_SHM
    [BE] * 100
    [BE] * 100
    8KB Block
    ---    rdisp/PG_MAXFS
    ---    32768
    ---                          32768
    8KB Block
        rdisp/PG_SHM
    [BE] * 50
    BE] * 50
    8KB Block
    PLease note that ours is a 64Bit kernel for WIndows 2003
    x86_64
    So is it ok to change the value of abap/heap_area_nondia  ?
    Thanks,
    M

  • EHP4 upgrade - win 32 bit

    Hello All,
    SAP is running om win 32 bit with oracle 10.2.0.5. pls check the below SP and kernel details .
    Can you pls advise any prechecks i have to perform before ehp4 upgrade as well sap note and sap standard document .
    Kernel release    700
    Compilation       NT 5.2 3790 Servic
    Sup.Pkg lvl.      353
    Database system      ORACLE
    Release              10.2.0.5.0
    Component version    SAP ECC 6.0
    Unicode System       Yes
    SAP_BASIS
    700
    0027
    SAPKB70027
    SAP Basis Component
    SAP_ABA
    700
    0027
    SAPKA70027
    Cross-Application Component
    PI_BASIS
    2006_1_700
    0017
    SAPKIPYM17
    Basis Plug-In (PI_BASIS) 2006_1_700
    ST-PI
    2005_1_700
    0006
    SAPKITLQI6
    SAP Solution Tools Plug-In
    SAP_BW
    700
    0029
    SAPKW70029
    SAP NetWeaver BI 7.0
    SAP_AP
    700
    0028
    SAPKNA7028
    SAP Application Platform
    SAP_APPL
    600
    0022
    SAPKH60022
    Logistics and Accounting
    SAP_HR
    600
    0086
    SAPKE60086
    Human Resources
    EA-IPPE
    400
    0022
    SAPKGPID22
    SAP iPPE
    EA-APPL
    600
    0022
    SAPKGPAD22
    SAP Enterprise Extension PLM, SCM, Financials
    EA-DFPS
    600
    0022
    SAPKGPDD22
    SAP Enterprise Extension Defense Forces & Public Security
    EA-FINSERV
    600
    0023
    SAPKGPFD23
    SAP Enterprise Extension Financial Services
    EA-GLTRADE
    600
    0022
    SAPKGPGD22
    SAP Enterprise Extension Global Trade
    EA-HR
    600
    0086
    SAPKGPHD86
    SAP Enterprise Extension HR
    EA-PS
    600
    0022
    SAPKGPPD22
    SAP Enterprise Extension Public Services
    EA-RETAIL
    600
    0022
    SAPKGPRD22
    SAP Enterprise Extension Retail
    FINBASIS
    600
    0022
    SAPK-60022INFINBASIS
    Fin. Basis
    ECC-DIMP
    600
    0022
    SAPK-60022INECCDIMP
    DIMP
    ERECRUIT
    600
    0022
    SAPK-60022INERECRUIT
    E-Recruiting
    FI-CA
    600
    0022
    SAPK-60022INFICA
    FI-CA
    FI-CAX
    600
    0022
    SAPK-60022INFICAX
    FI-CA Extended
    INSURANCE
    600
    0022
    SAPK-60022ININSURANC
    SAP Insurance
    Thanks

    Hi John,
    Few checks before you start the upgrade
    1) Check PAM for checking OS and DB compatibility with EHP4
    2) I could see apart from core ECC , you have HR module being implemented and used.
       So check upgrade release info for HR module if there is any dependecy
    3) For EHP4 related information refer SAP upgrade guide.
    Hope this helps.
    Regards,
    Deepak Kori

  • EHP4 Upgrade ABAP+JAVA stack

    Hi SDN Team,
    We are in the proceess of EHP4 upgrade,now we are at the road map configuration where we got stuck,I is looking for JAVA sca files in XML file but could not found the same and it throw an error,
    Trouble Ticket Log
    ===============
    Trouble Ticket Report
    Installation of enhancement package 1 for SAP NetWeaver 7.0
    SID................: SE1
    Hostname...........: NA00SAPSAND02
    Install directory..: g:/usr/sap/SE1
    Upgrade directory..: G:\EHPI\EHPI\java
    Database...........: Microsoft SQL Server
    Operating System...: NT
    JDK version........: 1.6.0_07 SAP AG
    SAPJup version.....: 3.4.29
    Source release.....: 700
    Target release.....: 700
    Start release SP...: $(/J2EE/StandardSystem/SPLevel)
    Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
    Current usages.....:
    ABAP stack present.: true
    The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
    The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
    More information can be found in the log file G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
    Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
    com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
    com.sap.sdt.ucp.phases.PhaseException
    The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
    PREPARE_JSPM_QUEUE
    INIT
    NetWeaver Enhancement Package Installation
    SAPJup
    Java Enhancement Package Installation
    We have added the system  in SMSY and download the stack properly and I could see SCA files listed in XML file but still iam stuck the above error
    PREPARE_JSPM_QUEUE_CSZ_02
    ===========================
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[2.0.7.1006]/>
    <!NAME[G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
    <!PATTERN[PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
    Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
    Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]:   Parameter inputFile=EHPComponents.xml
    Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack  queue preparator.
    Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
    Jul 27, 2010 3:48:22 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
    Jul 27, 2010 3:48:22 AM [Info]:                  com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
    Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml.
    Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
    Jul 27, 2010 3:48:22 AM [Info]:                   com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
    Jul 27, 2010 3:48:22 AM [Warning]:    com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system  SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
    Jul 27, 2010 3:48:22 AM [Warning]:    com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system  SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
    Jul 27, 2010 3:48:22 AM [Info]:                      com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
    Jul 27, 2010 3:48:22 AM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
    Jul 27, 2010 3:48:22 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
    Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
    Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/07/27 03:48:22.
    Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/07/27 03:48:22.
    Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.141.
    Jul 27, 2010 3:48:22 AM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
    Not sure what to do now.please advise.
    Regards
    Uday

    Hi Uday,
    > Jul 27, 2010 3:48:22 AM [Warning]:    >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system  SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
    > Jul 27, 2010 3:48:22 AM [Warning]:    >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system  SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
    > Jul 27, 2010 3:48:22 AM [Info]:                      >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of >stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
    > Jul 27, 2010 3:48:22 AM [Error]:                       >com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception >has occurred during the execution of the phase.
    > Jul 27, 2010 3:48:22 AM [Error]: >com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) >[Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no >components for this system.
    I can see in the log that stack xml you are using is not for the system to whom  you are upgrading. That is the reason system is rejecting stack file. Please check above extract of logs.
    I would suggest you to please generate stack xml file for this system from MOPZ after correctly configuring SMSY and use it. Then your problem will be resolved.
    Thanks
    Sunny

  • I have a mac 15" non retina and i didn't upgrade it to mavericks .. when i run photoshop my pc becomes very slow and i don't know why!! the performance on photoshop is up to 70% so i think is good .. what is the problem?

    i have a mac 15" non retina and i didn't upgrade it to mavericks .. when i run photoshop my pc becomes very slow and i don't know why!! the performance on photoshop is up to 70% so i think is good .. what is the problem?

    All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

  • EHP4 upgrade Error - phase MAIN_SHDINST/RUN_RSVWSCPY were negative

    Hello
    Currently I am doing EHP4 upgrade on Oracle 10g with Sun Solaris 5.10 , During preprocessing phase ( The EhP Installation program builds the shadow system from the original one.)
    I am getting following error
    Checks after phase MAIN_SHDINST/RUN_RSVWSCPY were negative!
    Last error code set: BATCH JOB RSUPG_COPY_SHD_VIEWS FAILED: Error(s) found in the log(s), accumulated in "RSVWSCPY.ELG".
    Log file for RSVWSCPY.ELG as below
    cat RSVWSCPY.ELG
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Clone shadow views ERRORS and RETURN CODE in RSVWSCPY.<SID>
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1EETGCLN ORA-12154: TNS:could not resolve the connect identifier specified
    1EETGCLN Unable to open connection to shadow system.
    1EETGCLN Use function module CREATE_SHDDBCON to adjust the settings for connection UPGSHD.
    cat sqlnet.ora
    ===========
    AUTOMATIC_IPC = ON
    TRACE_LEVEL_CLIENT = OFF
    NAMES.DEFAULT_DOMAIN = WORLD
    05.01.06 unsorported parameter now
    #NAME.DEFAULT_ZONE = WORLD
    05.01.06 set the default to 10
    SQLNET.EXPIRE_TIME = 10
    05.01.06 set to default
    #TCP.NODELAY=YES
    05.01.06 set to 32768
    DEFAULT_SDU_SIZE=32768
    cat tnsnames.ora
    =============
    <SID>.WORLD=
      (DESCRIPTION =
        (ADDRESS_LIST =
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = <hostname>)
              (PORT = 1527)
        (CONNECT_DATA =
           (SID = <SID>)
           (GLOBAL_NAME = <SID>.WORLD)
    ===
    Could you please help me to fix the issue.
    Thanks , BM

    Hello Orkur,
    Like bharath reddy and others, I´m facing with the same error, but in my case the platform is OS/400 (V7R1M0) database DB4!
    I´m doing an EHP5 upgrade and it stopped in phase MAIN_SHDINST/RUN_RSVWSCPY, the following error is show me:
    Checks after phase MAIN_SHDINST/RUN_RSVWSCPY were negative!
    Last error code set: BATCH JOB RSUPG_COPY_SHD_VIEWS FAILED: Error(s)
    found in the log(s), accumulated in "RSVWSCPY.ELG".
    In that RSVWSCPY.ELG file it have the following details:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Clone shadow views ERRORS and RETURN CODE in RSVWSCPY.PRD
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1EETGCLN
    1EETGCLN Unable to open connection to shadow system.
    1EETGCLN Use function module CREATE_SHDDBCON to adjust the settings for connection UPGSHD.
    I performed what you mentioned, I execute "Create_SHDDBCON" function module on SE37... but I didn´t continue this execution because I´m not sure what I have to fill in that parameters: DBUSER ; DBPASS and CONENV. You recommended some values to that fields/parameters... but where you have been seeking this values/information? How you know that?
    Can you help me/us?
    Thank you
    JC project

  • ABAP Dump After EHP4 Upgrade "SYNTAX_ERROR"

    Hello
    I performed ERP ECC 6.0 to EHP4 upgrade. System is working fine, Support Package stacks at maximum level, kernel, tp and R3trans is up-to-date. Only problem is I am getting "SYNTAX_ERROR" every minute. What could be the reason?
    Runtime Errors         SYNTAX_ERROR                                                            
    Date and Time          15.03.2010 16:10:28                                                                               
    Short text                                                                               
    Syntax error in program "CL_HTTP_SERVER_NET============CP ".                                                                               
    What happened?                                                                               
    The following syntax error occurred in the program                                        
          CL_HTTP_SERVER_NET============CP :                                                       
         "Method "SET_SSO_MANDATORY" is not declared or inherited in class "CL_H"                                                                               
    What can you do?                                                                               
    Please eliminate the error by performing a syntax check                                   
         (or an extended program check) on the program "CL_HTTP_SERVER_NET============CP           
    You can also perform the syntax check from the ABAP/4 Editor.                             
         If the problem persists, proceed as follows:                                                                               
    Error analysis                                                                               
    The following syntax error was found in the program                                       
          CL_HTTP_SERVER_NET============CP :                                                       
         "Method "SET_SSO_MANDATORY" is not declared or inherited in class "CL_H"                                                                               
    Information on where terminated                                                                   
        Termination occurred in the ABAP program "SAPLHTTP_RUNTIME" - in                              
         "HTTP_DISPATCH_REQUEST".                                                                     
        The main program was "SAPMHTTP ".                                                                               
    In the source code you have the termination point in line 124                                 
        of the (Include) program "LHTTP_RUNTIMEU02".                                                                               
    Source Code Extract                                                                               
    Line  SourceCde                                                                               
    94     ELSE.                                                                               
    95 *                                                                               
    96 * create a server control block for internal communication type of ICF                      
        97 *                                                                               
    98       CREATE OBJECT c_server_par TYPE cl_http_server_par.                                   
        99       c_server_par->set_local_server_name(                                                  
       100                       EXPORTING name = client_name                                          
       101                       EXCEPTIONS name_already_exists = 1 ).                                 
       102       c_server    = c_server_par.                                                           
       103 *      server_type = 2.                                                                     
       104                                                                               
    105 * insert server to server instances, only in case of stateful session                       
       106       server_instances-server      = c_server.                                              
       107       server_instances-client_name = client_name.                                           
       108     ENDIF.                                                                               
    109   ENDIF.                                                                               
    110                                                                               
    111 *                                                                               
    112 * create server control block, if not happen before                                             
       113 *                                                                               
    114   IF c_server IS INITIAL.                                                                       
       115                                                                               
    116     IF NOT server_accepted IS INITIAL AND                                                       
       117 *           server_accepted_type = 1.                                                           
       118        server_accepted->m_server_type =                                                         
       119            cl_http_server=>co_servertype_net.                                                   
       120 *   use last server object created for stateful communication                                   
       121       c_server_net ?= server_accepted.                                                          
       122     ELSE.                                                                               
    123 *   create a server control block for network communication type of ICF                         
    >>>>>       CREATE OBJECT c_server_net TYPE cl_http_server_net.                                       
       125     ENDIF.                                                                               
    126 *   accepted server control block called via network                                            
       127     c_server    = c_server_net.                                                                 
       128 *    server_type = 1.                                                                               
    129 * register network server for HTTP auto logout (timeout handler )                               
       130     server_accepted_org = c_server.                                                             
       131   ENDIF.                                                                               
    132                                                                               
    133 * for local execution use VIRTUAL_HOST parameter                                                
       134   IF NOT document_in IS INITIAL.                                                                
       135     cl_http_server=>c_virtual_host = virtual_host.                                              
       136   ENDIF.                                                                               
    137                                                                               
    138 *                                                                               
    139 * register accepted server control block for responses of network                               
       140 * server_accepted is used in function modules HTTP_CONFIRM_USERSWITCH                           
       141 * and HTTP_GET_CURRENT_SERVER_CB                                                            
      142 *                                                                               
    143   IF server_accepted IS INITIAL.                                                                               
    Internal notes                                                                               
    The termination was triggered in function "ab_genprog"                                         
         of the SAP kernel, in line 1584 of the module                                                  
          "//bas/701_REL/src/krn/runt/abgen.c#6".                                                       
         The internal operation just processed is "ABOO".                                               
         Internal mode was started at 20100315161028.                                                   
         Program name.........: "CL_HTTP_SERVER_NET============CP ".                                    
         Error message........: "Method "SET_SSO_MANDATORY" is not declared or inherited                
          in class "CL_H".

    Hello Kaan,
    Please try this workaround:
    1) se24
    2) put the class name "cl_http_server_net"
    3) create a new method "SET_SSO_MANDATORY"
    as instance methid and "visibility" private
    Regards
    Niraj
    Edited by: Niraj Kumar Soni on Mar 15, 2010 8:24 PM

  • SAP R/3 4.6B to ECC6 EHP4 Upgrade

    Hello,
    We are on SAP R/3 4.6B and are in the process/plan of Upgrading to ECC 6...
    Is it possible to directly go to EHP4 in a single downtime..?
    I am trying to finf the Source/DVD's from the market place but unable to locate one...
    Is it possible or should we go to EHP3 only?
    If someone has link/path for the software download , kindly help...
    Thanks,
    RaHuL...

    [http://service.sap.com/swdc|http://service.sap.com/swdc]
    - download
    - Installations and upgrades
    - installations and upgrades - Entry by Application Group
    - SAP Application Components
    - SAP ERP
    - SAP ERP Enhance Package
    - EHP4 for SAP ERP 6.0 / NW 7.01
    Here you should read the info page carefully.
    Download the Master Guide and read it to find out about how to perform the upgrade.
    - Installation and Upgrade
    - <Database Platform>
    There is your media. Please note that it is both Installation and upgrade media
    and also both ERP and SRM media
    In order to get the kernel etc you have to select (instead of "Installation and Upgrade --> Database Platform")
    - SAP EHP1  FOR SAP NETWEAVER 7.0
    - Installation and Upgrade
    - <Operating System>
    - <Database Platform>
    There is your media together with installation and upgrade for the Netweaver platform (used when upgrading BI etc).
    Please note that you also need the Maintenance Optimizer configured in Solution Manager in order to download
    (actually you approve them for download) support packages etc from the Service Marketplace.

  • Hi apple team.. Am really disappointed by the performance of iOS7.. First of all the UI is soo cartoonish as a high school students have designed it..

    Hi apple team.. Am really disappointed by the performance of iOS7.. First of all the UI is soo cartoonish as a high school students have designed it.. Secondly after upgrading my phone started to lag badly.. All my frnds r facing same problm.. Plz release a fix for this or let me knw how to downgrade to iOS6 i was very happy with that.. Even while typing this msg the keyboard is lagging badly.. Plz help..

    Sorry, Apple has no approved method to downgrade the version of iOS on your iDevice. You can voice your displeasure with the iOS by leaving feedback at the appropriate subsection from the link below.
    http://www.apple.com/feedback/

  • Error while doing EHP4 upgrade in downtime phase

    HI .
    Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
    Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
    Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
    Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04  LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
    Please help me in resolving this error.
    Sanketh.

    Hi,
    Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
    Thanks
    Sunny

  • Oracle Follow-Up activities after EHP4 Upgrade

    Hi!
    I am currently executing the EHP4 Upgrade for SAP ERP 6.0 with Oracle.
    After doing so I need to execute several oracle specific actions
    Can some one give me technical documentation for the following actions:
    1) Delete all empty Tablespaces
    Question: How (SQL commando) can I identify which of my tablespaces are empty?
    2) Tablespace "PSAPSR3700" should be released/deallocated
    Question: what does it mean? 
    3) Load generation ???
    Any helpful information will be very appreciated
    Jürgen

    > 1) Delete all empty Tablespaces
    > Question: How (SQL commando) can I identify which of my tablespaces are empty?
    You can check that using brtools.
    > 2) Tablespace "PSAPSR3700" should be released/deallocated
    > Question: what does it mean? 
    The sources are in PSAPSR3701 with EHP4 so that old tablespace is no more needed.
    > 3) Load generation ???
    Yes -run SGEN.
    Markus

  • Execution of Reports phase error during SAP EHP4 upgrade with EHPi

    I started getting an error message in the "Execution of reports after put" phase
    (within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
    Package Installer.
    ***** LIST OF ERRORS
    AND RETURN CODES *****
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
    text: Cause Program "&V#&", which was started in the background, was
    terminated abnormally. System Response The system created a job log for
    the terminated program. What to do Proceed as follows: Log onto the
    system in which the program was executed. The system is specified at the
    beginning of the transport log. Then call transaction SM37 to display the
    job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
    starting date to the starting date specified in the transport log. For
    the other selection criteria, select only jobs with the status
    "cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
    selection criteria is displayed. You can display the log by pressing
    <LS>Job log</>. If the list contains several jobs, you can select the job
    with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
    further details for the selection criteria in the initial screen of
    transaction SM37. If the ABAP processor reports cancellation,
    double-clicking on the corresponding message in the job log branches to
    the display of the corresponding short dump. 1AEPU320 See job
    log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
    application reports that run at the end of an upgrade.
    Most XPRA reportshave a report documentation that explains what the report does and how
    errors can be corrected. Call transaction se38 in the SAP system, enter
    the report name, select 'Documentation' and click the 'Display' button.
    >>> The problematic XPRAs are mentioned in messages of type PU132 above
    <<<
    I tried to follow the instructions in note 1269960, but the enhancement spot
    CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
    but got the same error. Also, I couldn't implement the note using SNOTE because it is
    the middle of the upgrade process.
    I also found the following long text in ST22
    "Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
    Processing had to be terminated because an internal error
    occurred when generating the ABAP/4 program
    "CL_CLS_BADI_CHARACTERIZATION==CP".
    The internal system error cannot be fixed by ABAP means only."
    I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
    So far, I could not find any information on this. Any help would be greatly appreciated!
    Thanks,
    Victor

    Hi Victor,
    Go to SM37 and put in the username as DDIC and see the job log.
    Also check  Sm50 and see whether you have BTC processes available.
    Last but not the least check your filesystem space  usage too.
    Gerard

  • Questions on EHP4 upgrade

    Hi friends,
    I have just completed an EHP4 upgrade on ERP 6.0 system
    Environment is Win 2008 and DB2 9.1
    1. Just before the downtime started, ehpi inst came up with a screen which informs to
        a. backup installation directory and take a database backup @ this point
            To restart installation from this point --> restore database and program directory
    At this point, I can either enter downtime or go productive again, reverting back the changes
    Next line says --> If you restored the system to this point from the backup, you can also chose to go productive again. You can enter downtime later
    What does this line mean, i just cant comprehend it in this scenario
    2. During upgrade, manual actions require creation of the below 4 tablespaces with different initial sizes
    SID#EL701DX
    SID#EL701IX
    SID#ES701DX
    SID#ES701IX
    Now that i upgrade is complete, is it SAFE to delete these freespaces, which i understand were used by shadow system
    if yes, then why doesnt the EHPi installer delete it itself as part of post processing
    Thanks in Advance
    Shanmuga

    Thanks Markus
    It means that if you had a problem and you restored the system, then you can go back to production or continue with the upgrade.
    Does it mean, going productive will mean all the steps till preprocessing will be of no use, unless i restore backup and inst directory, which will then lose out on all productive changes after backup(taken earlier)
    - they are still needed (those tablespaces contain the Netweaver basis 7.01)
    - EHPI never deletes tablespaces on his own. Doing that task is part of the post processing (read the upgrade guide).
    As per the guide, i need to run the command
    my kernel release before and after upgrade is 701
    i substituted REL to 701 in below command
    select tbspace from syscat.tablespaces TS where TS.tbspace like '%E%701%' and not exists ( select 1 from syscat.tables where tbspace = TS.tbspace or index_tbspace = TS.tbspace or long_tbspace = TS.tbspace )
    SID#EL701D
    SID#EL701I
    SID#ES701D
    SID#ES701I
    Should i delete these tablespaces, these tablespaces were available earlier, the new ones created during upgrade had a suffix X to all these tablespaces
    Edited by: Shanmuga Sundaram on Jun 16, 2010 11:08 AM
    Edited by: Shanmuga Sundaram on Jun 16, 2010 11:13 AM

  • Performance issues since upgrade

    I am on a late 2011 MacBook Pro and am having severs performance issues since upgrading to Mavericks. I fear my issues may be related to company installed anti-virus (which I cannot remove), but I was hoping someone could look over my EtreCheck for other potential solutions.
    One really odd issue I am having, which I cannot seem to find good information for on Google, is at least 4-5 times a day my Mac just stops. No beach ball, no anything, for about 1-5 minutes. Then it's fine. Maybe just me grasping at straws, but it seems related to a when webpage loads a bunch of images? I always use Safari btw, but testing other browsers, like Chrome & Firefox, it happens as well.
    I have also removed TotalFinder and have noticed no improvement and still have the above issue.
    Thanks in advance!
    Here is my EtreCheck:
    Problem description:
    slow performance on Mavericks
    EtreCheck version: 2.0.11 (98)
    Report generated November 11, 2014 at 8:51:26 AM EST
    Hardware Information: ℹ️
      MacBook Pro (17-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,3
      1 2.5 GHz Intel Core i7 CPU: 4-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      AMD Radeon HD 6770M - VRAM: 1024 MB
      Color LCD 1920 x 1200
      LED Cinema Display 1920 x 1200
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:46:22
    Disk Information: ℹ️
      APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 749.30 GB (256.69 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Fitbit Inc. Fitbit Base Station
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple, Inc. Keyboard Hub
      Apple, Inc Apple Keyboard
      Tablet PTZ-630
      Logitech Logitech USB Headset
      Apple Inc. Display iSight
      Apple Inc. Apple LED Cinema Display
      Apple Inc. Display Audio
      Apple Computer, Inc. IR Receiver
    Firewire Information: ℹ️
      Iomega HDD unknown_device 800mbit - 800mbit max
      S.M.A.R.T. Status: Verified
      disk1s1 (disk1s1) <not mounted> : 32 KB
      Iomega HDD (disk1s3) /Volumes/Iomega HDD : 500.04 GB (22.88 GB free)
      Files (disk1s5) /Volumes/Files : 499.90 GB (416.87 GB free)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /Library/Application Support/Symantec/Protector
      [not loaded] com.symantec.kext.protector.panther (1.0f5) Support
      [not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
      /Library/StartupItems/SymAutoProtect
      [loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
      [loaded] com.InnovationTechnology.driver.ComputerAudio (1.01 - SDK 10.7) Support
      [not loaded] com.cisco.nke.ipsec (2.0.1) Support
      [not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) Support
    Startup Items: ℹ️
      CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
      NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
      SMC: Path: /Library/StartupItems/SMC
      SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
      SymProtector: Path: /Library/StartupItems/SymProtector
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.CS5ServiceManager.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.jamfsoftware.jamf.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.symantec.quickmenu.application.plist Support
      [running] com.wacom.wacomtablet.plist Support
      [running] net.juniper.pulsetray.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.fitbit.fitbitd.plist Support
      [running] com.fitbit.galileod.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.jamfsoftware.jamf.daemon.plist Support
      [not loaded] com.jamfsoftware.startupItem.plist Support
      [loaded] com.jamfsoftware.task.1.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] com.rogueamoeba.instanton-agent.plist Support
      [running] net.juniper.AccessService.plist Support
      [loaded] net.juniper.UninstallPulse.plist Support
    User Launch Agents: ℹ️
      [loaded] com.valvesoftware.steamclean.plist Support
      [running] ws.agile.1PasswordAgent.plist Support
    User Login Items: ℹ️
      gfxCardStatus Application (/Users/[redacted]/Downloads/gfxCardStatus.app)
      Dropbox Application (/Applications/Dropbox.app)
      Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
      cdn Volume (/Volumes/cdn)
      TotalFinder Application (/Applications/TotalFinder.app)
      SAVDiskMountNotify Application (/Library/Application Support/Symantec/AntiVirus/SAVDiskMountNotify.app)
      ScanNotification Application (/Library/Application Support/Symantec/AntiVirus/ScanNotification.app)
      SymSecondaryLaunch Application (/Library/Application Support/Norton Solutions Support/Scheduler/SymSecondaryLaunch.app)
    Internet Plug-ins: ℹ️
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
      AdobePDFViewer: Version: 10.0.2 Support
      Unity Web Player: Version: UnityPlayer version 4.5.4f1 - SDK 10.6 Support
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
      iPhotoPhotocast: Version: 7.0
      DirectorShockwave: Version: 11.5.9r620 Support
      QuickTime Plugin: Version: 7.7.3
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Silverlight: Version: 4.0.60310.0 Support
      MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
      net.juniper.DSSafariExtensions: Version: (null) Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.3.1.2 Support
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
      WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
    User Internet Plug-ins: ℹ️
      SOEWebInstaller: Version: 1.0 - SDK 10.5 Support
      Aspera Web 3.1.2.72265: Version: (null) - SDK 10.6 Support
    Safari Extensions: ℹ️
      1Password
      Adblock Plus
      Reddit Enhancement Suite
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      MacFUSE  Support
      SymAutoProtect
      Symantec\nQuickMenu  Support
      WacomTablet  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Destinations:
      Iomega HDD [Local]
      Total size: 500.04 GB
      Total number of backups: 37
      Oldest backup: 2014-10-14 14:11:11 +0000
      Last backup: 2014-11-11 13:27:48 +0000
      Size of backup disk: Excellent
      Backup size 500.04 GB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          36% com.apple.WebKit.Plugin.64
          34% SymAutoProtect
          13% WindowServer
          9% Unity
          4% Activity Monitor
    Top Processes by Memory: ℹ️
      455 MB Safari
      361 MB com.apple.WebKit.Plugin.64
      292 MB Unity
      77 MB com.apple.WebKit.Networking
      77 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      2.08 GB Free RAM
      2.39 GB Active RAM
      1.34 GB Inactive RAM
      1.40 GB Wired RAM
      1.11 GB Page-ins
      5.54 GB Page-outs

    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy

Maybe you are looking for

  • During an update my Mac turned off and will no longer boot into the user interface.

    The situation is that I don't have an os disk with me - traveling abroad - and would like to be able to create one using my PC. - First is this possible? - Second, will I lose my personal data upon system reinstall! As far as the boot sequence goes i

  • Connect Mobile for RIM Blackberry Playbook hangs while trying to connect to server

    We have Adobe Connect 8 (Multilanguage - Portuguese) installed on a server. Connect Mobile for RIM Blackberry Playbook hangs while trying to connect to the server. Hayward Drummond has posted a notice about Adobe Connect 8.1.2 that seems to solve thi

  • Nokia lumia 820 music

    Hello, I have just bought my Nokia Lumia 820 and updated it to Amber but I can't see the Nokia Music. All I have been using is the Xbox Music. Kindly assist, its really frustrating.

  • SXMB_MONI - Email Alerts

    Hi There, SAP SNC system have SXMB_MONI transaction. it is the same that we have in PI however there we dont have any alert mechanism  (I dont aware about it). Is it possible to send email alerts for the failed messages of SXMB_MONI. I want to know t

  • Don't send me more emails please

    Don't send me more emails please