Evaluating tag attribute with more than one el

the following code
          baseurl="keywords=${param['keywords']}&spatialBounds=${param['spatialBounds']}"
          in not correctly processed by weblogic 9.0 server
          the resulting html is just baseurl="keywords="
          --> When I have more than one el in the same attribute the el are not evaluated.
          --> This code works in Tomcat & Resin
          --> Is it a bug in weblogic?

TÃtulo: Quer mudar sua vida??Leia com atenÃ§Ã£o!
          Autor: LUIZ
          Data: 19/11/2005
          Cidade: Boa Vista
          Estado: RR
          PaÃs: Brasil
          COMO ACABAR COM A DIFICULDADE FINANCEIRA
          ACABE COM A DIFICULDADE FINANCEIRA
          GANHE MUITO DINHEIRO COM APENAS 6 REAIS
          HONESTIDADE, INTELIGENCIA E EFICÃCIA
          POR FAVOR, LEIA COM BASTANTE ATENÃ‡ÃƒO, VALE A PENA!
          COMO TRANSFORMAR 6 (SEIS) REAIS EM NO MINIMO 6.000(SEIS MIL REAIS) !! : VOCÃŠ Ã‰ CAPAZ, APENAS FAÃ‡A FUNCIONAR.!
          Eu achei uma mensagem sobre esse assunto e nÃ£o dei muita atenÃ§Ã£o por ser um texto muito longo e parecer ser presente de papai Noel, mÃ¡s resolvi arriscar e deu certo. Vou tentar resumir para que vc tbm nÃ£o ache esse texto cansativo e se quiser mais informÃ§Ãµes mande-me um e-mail â€“ [email protected].
          Funciona assim:
          PASSO 1: Separe 6 meias folhas de papel e escreva em cada uma, o seguinte bilhete: " POR FAVOR, PONHA-ME EM SUA LISTA DE REMETENTES" colocando seu nome e endereÃ§o logo abaixo. Agora adquira 6 notas de R$ 1,00 e envolva cada uma em um dos bilhetes que vocÃª acabou de escrever. Em seguida, envolva cada um deles novamente com um papel escuro, para evitar que alguÃ©m veja a nota e viole o envelope, roubando o dinheiro. EntÃ£o coloque cada um dentro de um envelope e lacre. A lista abaixo contÃ©m 6 nomes com endereÃ§os e vocÃª tem 6 envelopes lacrados. VocÃª deve REMETER PELO CORREIO, um envelope para cada um dos nomes da lista. FaÃ§a isto, anotando corretamente o nome e o endereÃ§o nos envelopes, depositando em seguida no correio. A lista se encontra no final desse texto : PASSO 2: Elimine o primeiro nome da lista (#1). Reordene a lista de 1 a 5, ou seja (2 torna-se 1), (3 torna-se 2), etc.. Coloque o SEU nome e endereÃ§o como o 6Âº(sexto) da lista. :
          PASSO 3: ApÃ³s feitas as alteraÃ§Ãµes acima, coloque este artigo em pelo menos 200 fÃ³runs e newsgroups.VocÃª pode modificar o texto deste artigo, mas por favor, mantenha a integridade da mensagem. Isto Ã© importante. LEMBRE-SE, quanto mais mensagens nos fÃ³runs, newsgroups e livros de visitas vocÃª colocar, mais dinheiro vocÃª ganharÃ¡!
          O retorno serÃ¡ melhor se vocÃª colocar um bom tÃtulo ( ou esse mesmo), que fique visÃvel para todos.
          Agora, coloque o artigo modificado (ou esse mesmo).Existem milhares de fÃ³runs e newsgroups. VocÃª sÃ³ precisa de 200. EntÃ£o mÃ£os Ã obra, LEMBRE-SE Toda vez que alguÃ©m agir como vocÃª, salvando esta mensagem, seguindo e executando corretamente todas as instruÃ§Ãµes, 6 pessoas estÃ£o sendo beneficiadas com R$ 1,00 cada e seu nome subirÃ¡ na lista. Assim as listas multiplicam-se rapidamente e seu nome vai subindo atÃ© atingir a primeira posiÃ§Ã£o. Desta forma quando seu nome alcanÃ§ar a #1 posiÃ§Ã£o, vocÃª jÃ¡ terÃ¡ recebido milhares de reais em DINHEIRO VIVO! Lembre-se que vocÃª sÃ³ investiu R$6.00. Envie agora os envelopes, suba o nome dos participantes da lista e adicione seu prÃ³prio nome na sexta posiÃ§Ã£o da lista, poste-a nos fÃ³runs e vocÃª estÃ¡ no negÃ³cio!
          COMO POSTAR NOS NEWSGROUPS --------
          Etapa 1) Copie e salve este artigo em seu editor de texto. (selecione o texto, clique em Editar e Copiar, abra seu editor de texto e clique em Editar e Colar, depois clique em Arquivo e Salvar como .txt) Etapa 2) FaÃ§a as devidas alteraÃ§Ãµes neste artigo, incluindo seu nome na sexta posiÃ§Ã£o da lista. Etapa 3) Salve novamente o arquivo. Clique em Editar e Selecionar tudo. Clique novamente em Editar e Copiar. Etapa 4) Abra seu navegador, Netscape, Internet Explorer ou algum outro qualquer e procure vÃ¡rios newsgroups (fÃ³runs on-line, cadernos de mensagens, locais de conversa, discussÃµes) e poste uma mensagem nova em cada MURAL ou ÃREA, ou algo similar. Etapa 5) Para postar entre nesses newsgroups. No campo destinado para digitar o texto ou mensagem a ser enviada para o newsgroups, clique com o botÃ£o direito do mouse. Em seguida clique em Colar. Como Assunto ou tÃtulo, digite um nome que chame a atenÃ§Ã£o, como o meu, ou invente algo parecido. Clique em enviar e pronto, vocÃª acabou de enviar sua primeira mensagem! ParabÃ©ns...Etapa 6) Selecione outro newsgroups e repita o passo 5. FaÃ§a isso no mÃnimo para 200 newsgroups. **QUANTO MAIS MENSAGENS VOCÃŠ ENVIAR AOS NEWSGROUPS MAIS CHANCES VOCÃŠ TERÃ DE GANHAR MAIS DINHEIRO ** Pronto! VocÃª logo comeÃ§arÃ¡ a receber dinheiro pelo correio. Se vocÃª deseja ficar anÃ´nimo, vocÃª pode inventar um nome para usar na lista, contanto que o endereÃ§o esteja certo para que vocÃª receba o dinheiro. **CONFIRA SEU ENDEREÃ‡O!!!.
          ------- PORQUE RENDE TANTO DINHEIRO --------
          Agora vamos ver POR QUE rende tanto dinheiro: Fazendo uma anÃ¡lise bastante pessimista, vamos supor que de cada 200 mensagens, apenas 5 dÃªem retorno. Assim das minhas 200 mensagens, receberei apenas R$5,00 referentes ao meu nome na #6 posiÃ§Ã£o. Agora, cada uma das 5 pessoas que me enviaram R$1.00 postaram mais 200 mensagens cada uma. Se apenas 5 de cada 200 retornarem, receberei R$ 25,00 referentes ao meu nome na #5 posiÃ§Ã£o. Agora, cada uma das 25 pessoas que me enviaram R$1.00 postaram mais 200 mensagens cada uma. Se apenas 5 de cada 200 retornarem, receberei R$ 125,00 referentes ao meu nome na #4 posiÃ§Ã£o. LEMBRE-SE ! Estamos considerando um exemplo extremamente fraco. Agora, cada uma das 125 pessoas que me enviaram R$1.00 postaram mais 200 mensagens cada uma. Se apenas 5 de cada 200 retornarem, receberei R$ 625,00 referentes ao meu nome na #3 posiÃ§Ã£o. Agora, cada uma das 625 pessoas que me enviaram R$1.00 postaram mais 200 mensagens cada uma. Se apenas 5 de cada 200 retornarem, receberei entÃ£o R$ 3.125,00 referentes ao meu nome na #2 posiÃ§Ã£o. Agora, cada uma das pessoas que me enviaram R$1.00 postaram mais 200 mensagens cada uma. Se apenas 5 de cada 200 retornarem, receberei nesta Ãºltima fase R$ 15.625,00 referentes ao meu nome na #1 posiÃ§Ã£o. INCRÃVEL! Com um investimento original de apenas R$6,00, cria-se uma oportunidade gigantesca. Estima-se que entre 20.000 e 50.000 novas pessoas se juntem Ã Internet todos os dias e vÃ£o para os chats e fÃ³runs. "O que sÃ£o seis reais para tentar uma chance milionÃ¡ria que pode dar certo?" As chances sÃ£o grandes quando milhÃµes de pessoas honestas como vocÃª estÃ£o se juntando a esse grupo?? Lembre-se, a HONESTIDADE faz parte deste jogo. MANDE UM DÃ“LAR AO INVÃ‰S DE UM REAL PARA OS ESTRANGEIROS .
          IMPORTANTE: O envio das cartas contendo o bilhete e R$1,00, Ã© que torna honesto e prospero o sistema, assim o sistema sobrevive, pois tudo que Ã© desonesto, mais cedo ou mais tarde, fracassa certamente.
          NÃ“S SOMOS RICOS, NÃ“S SOMOS PROSPEROS, NÃ“S ESTAMOS CHEIOS DE SAÃšDE E HARMONIA.
          **** SE VC DESEJA PARTICIPAR DESSA CORRENTE DE SOLIDARIEDADE E AO MESMO TEMPO FICAR RICO, MANDE (1 REAL) PARA CARA UM DOS NOMES ABAIXO******
          ENDEREÃ‡OS DAS PESSOAS QUE VC DEVE ENVIAR R$1,00 JUNTO COM O BILHETE:
          1)Luiz Carlos Rodrigues - Av. Dr. Nilo PeÃ§anha,252 - MarapÃ©.
          CEP: 11070-050 SANTOS - SP
          2)Renato Pontes Eller - Rua Ranulfo Alves,709 Vila Isa.
          Cep: 35044-220 Governador Valadares - MG
          3)Dalton Sampaio - Rua Senador MÃ¡ximo, 75 - Centro.
          Cep: 57250-000 Campo Alegre â€“ AL
          4)Samuel Rodrigues P. Junior â€“ Av. Ernani do Amaral Peixoto, 195 Apt 701 - Centro.
          Cep: 24020-071 NiterÃ³i - RJ
          5)PatrÃcia A de Barros Silva â€“ Rua Maria Teresa AssunÃ§Ã£o 479 A â€“Penha
          CEP:03609.000 â€“SÃ£o Paulo-SP
          6) Luiz Faustino â€“ Rua Ãgata, 238 â€“ JÃ³ckey Club
          CEP: 69313-108 â€“ Boa Vista - RR
          NÃƒO PERCA TEMPO COMECE JÃ A ENVIAR SUAS CARTAS E POSTAR!!!QUANTO ANTES MELHOR, MAIS RAPIDO COMECARA A RECEBER AS SUAS CARTAS!!!!

Similar Messages

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

GetParameter() with more than one word

hi all
i have these statement in my Servlet
String cust = rs.getString(1);
out.println("<INPUT TYPE=radio NAME=cdnames VALUE="+ cust + ">"+ cust + "<br>");
out.println("<input type=submit>");
out.println("</form>");
String lastName = request.getParameter("cdnames");
out.println("<P>"+lastName+"</P>");
so as u can tell there are some radio buttons on the page and i want to see which one user selected. It works fine. But when i have a radio button with more than one word..it just returns the first word. For example if my radio button is "Sudesh Sharma" then the value in my String lastName will just be Sudesh and not Sudesh Sharma. How can i fix this?

It is always a good idea to surround all html attribute values in quotes. And why you are at it, always use lower case for html tags:
String cust = rs.getString(1);
out.println("<input type=\"radio\" name=\"cdnames\" value=\""+ cust + "\"/>"+ cust + "<br/>");
out.println("<input type=\"submit\">");
out.println("</form>");
String lastName = request.getParameter("cdnames");
out.println("<p>"+lastName+"</p>");

Create a dynamic search in JSP with more than one datasource

Hello,
In the ViewCiteria tag you can specify the datasource in which you want to place the criteria. Is it also possible to work with more than one datasource ?
In my project I want one query form for specifying criteria for more than one datasource. When I send the query form, I want the right view criteria will be coupled with the right datasource.
Has someone more experience with that ???
Thanks!!!

Hi,
I think I got the same problem! I tried to combine all the tables in a new view and create a query on this view.
But when I search and my result has to be one record from the main table, I get this record more than once.
I tried to use distinct but that does not work because each column has a different value, so the record is never the same.
I hope someone can help us!

Creating Pages in PeopleSoft with more than one HTML Form

Hi,
We've a requirement to create a page in PIA with more than one HTML form.
As per PBooks - "The page being developed cannot be built using PeopleSoft Application Designer.
An example of this is a page that requires more than one HTML form.
PeopleSoft Pure Internet Architecture places the entire page inside of a single form tag, so no other HTML form tags can be added.
In this case the requirements of the page can't be met by pages created in PeopleSoft Application Designer, so use IScripts instead."
If someone can share his/her experience, It Would be of great help to me.
-Thanks!!

Take a look at my IScript postings. Let me know if you still have questions after reading these blog posts.

Generating excel with more than one tab

Hi,
I would like to ask if anyone of you know how to generate excel file from Oracle Reports with more than one tab? Is it possible? If yes, can you provide me some references on how to do it. Thanks in advance.

Hi,
Do this:
1. Create an Excel file, put some dummy data in 2 or more worksheets. Save as HTM. This will create one main HTM file, and some sub-files under a folder. One HTM sub-file will be created per worksheet. In addition, one XML sub-file (called filelist.xml) and some other sub-files will be created. (you have already done this)
2. Open one of the HTM sub-files in reports builder, and follow the steps shown in the Excel Demo on OTN to insert data in this file at appropriate place, and save as JSP.
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/excel/index.html
3. You can repeat this step for all worksheets. So finally you will get one JSP file per worksheet.
5. Now open the main file in reports builder, and add the Excel contentType element at the top
     <%@ page contentType="application/vnd.ms-excel; charset=windows-1252" %>
6. In this file, search for the following tag
     <x:WorksheetSource HRef="./filename_files/sheet001.htm"/>
Note that instead of filename_files you will have your own file name
Change this tag as following:
     <x:WorksheetSource HRef="./filename_files/sheet001.jsp?userid=scott/tiger@myDb"/>
Note that in userid, you must provide your own DB connect string
7. Additionally, change ALL references to sheet001.htm in this file to sheet001.jsp
Do steps 6 and 7 for sheet002.htm, sheet003.htm, and so on (if needed).
8. Open filelist.xml (you will find this file inside the folder that contains sub-files). Here, too, change all references to JSP instead of HTM
9. Now place the main JSP file as well as the folder containing all sub-files inside your J2EE deployment folder. Run the main JSP file. This will run the associated JSP files (the worksheets).
This will do the trick.
If you are worried about placing the USERID information inside your JSP code, then you can use CGICMD.DAT file, and place the userid there.
Navneet.

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Can I use a magic trackpad with more than one Mac at a time?

I am attempting to pair a MTP with a second MacBook Pro. So far I can't get system preferences to find the MTP.
I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac. To do this, you first remove the existing pairing and then pair the trackpad again'.
Can anyone advise, please?
If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
Thanks

Yes, your keyboard, mouse or trackpad can be paired with multiple Macs. You can even have multiple keyboards, mice or trackpads paired with one Mac. The caveat is that the device can only be connected to one Mac at a time. The device can't be paired or connected with a Mac while it's currently connected to another.
Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other. The device will connect with the first available paired Mac and then unavailable to the second. If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on. I do this with a keyboard from my iMac to a Mac Mini in another room.
Captfred

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Send email from SAP with more than one attachment

Hi all,
How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
Besr regards,
Munur

Hi,
I use :
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
the main problem with different attachemts is to genereate the packing_list.
the packing list is a kind of description of the data table... where ist the start of an image, end, size...
"Creation of the entry for the compressed attachment
        objpack-transf_bin = 'X'.                    " it could be an image
        objpack-head_num = lv_head_num_count . " inital 1 each att add 1
        objpack-head_start = 1.                     " fix
        objpack-body_start = gv_startnum.    " table with attachments 1. line one
        objpack-body_num = tab_lines.          " how many lines are in the table of attachment
        objpack-doc_size = tab_lines * 255.   " size of the attachment...
       objpack-doc_type = lv_typ . " 'JPG'.
        objpack-obj_name = 'ATTACHMENT'.
        objpack-obj_descr = lv_stripped_name " name of the JPG
   APPEND objpack.
   APPEND LINES OF lt_goscontent TO gt_maildata. " data Table...
bestreg
robert

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

A Cloud subscription provides for installing working installations on two machines. You can have mixed operating systems (both Windows and Apple's OX).

When I import a cd with more than one artist iTunes separates each individual artist - how do I get it to show the album as a whole rather than individual artist?

When I import a cd with more than one artist itunes shows each artist's song separately and won't group the album as a whole - this is incredibly frustrating something that Windows media player doesn't do. Does anyone have a simple cure for this annoyance?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

Can you sign in with more than one apple id on an iPad?

Can you sign in with more than one apple id on an iPad?

Only one account can be signed in at a time (via Settings > Store), and if you turn on automatic downloads and/or download past purchases from an account then you risk tying the iPad to that account for 90 days : http://support.apple.com/kb/HT4627

Why is all my icloud account linked with more than one apple id?

why is my iphone 5 merged with more than one account?

What do you mean by "merged with more than one account" and "linked with more than one Apple ID"? What exactly are you seeing on your phone?

HT1040 Is there a way to place an order with more than one item at a time? For example I am going to make a few books and have them all shipped to me. Do I have to order and pay shipping for each one individually?

Is there a way to place an order with more than one item at a time? for example I am making a few books and having them all shipped to me. Do I have to order each one separately and pay shipping each time?

You have to order each book separately, if the books are different. Only multiple copies of the same book can be ordered in the same order, see here
Regards
Léonie

Evaluating tag attribute with more than one el

Similar Messages

Maybe you are looking for