Event date
When importing or moving photos the event date and the photo date are the date of import, not the date taken. I created a new library and imported a few photos; they had the correct date. Now what do I do?
Where are you seeing the dates reported?
Where are you importing from?
Similar Messages
-
Event dates are not bolded by Date Navigator in Outlook 2010
Event dates are not bolded by Date Navigator in Outlook 2010 on my own calendar. Events are set to busy but it is not working. View Settings > Other Settings > "Bolded dates in Date Navigator represent days containing items" is
checked. This previously worked for 2+ years but recently stopped working. All plugins were disabled, Outlook 2010 was uninstalled and then re-installed. OST file was deleted and re-synchronized with Exchange 2007. While the OST was re-synchronizing the
bolding worked properly but upon next restart of Outlook it went away. Another symptom is that my Scheduling Assistant does not show my free/busy times correctly in my local view. If I look at my own schedule via the Scheduling Assistant of another user, the
free/busy times show up correctly. My webmail account also correctly shows bolded dates and free/busy suggesting that this is a local problem. Some screen shots below. Anyone have any ideas as to what I need to tweak? Using Oulook 2010 v.14.7116.500 (32-bit).
This is not a shared calendar.Hi,
If you want to completely uninstall or remove Microsoft Office 2010, we can refer to the following article to do it:
http://office.microsoft.com/en-us/support/how-to-uninstall-or-remove-microsoft-office-2010-suites-HA104027750.aspx
Additionally, since the issue doesn’t happen in other computers, I think the issue may be also caused by some third-party programs in your original computer. If the complete uninstallation doesn’t help for this issue, I suggest we can try to perform a clean
boot in your Windows for more troubleshooting:
http://support.microsoft.com/kb/929135/en-us
Thanks,
Winnie Liang
TechNet Community Support -
got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
RajHi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS. -
How to display an "All Day Event" date correctly in an integrated SSRS Report?
I have two event items in a calendar list in SharePoint 2010. Both items have the same start time and end time. One of them, however, has the "All Day Event" checkbox checked. If I access them through a REST service, this is how the data is
returned:
<!-- item 1 -->
<d:StartTime m:type="Edm.DateTime">2014-03-21T00:00:00</d:StartTime>
<d:EndTime m:type="Edm.DateTime">2014-03-25T23:55:00</d:EndTime>
<d:AllDayEvent m:type="Edm.Boolean">false</d:AllDayEvent>
<!-- item 2 -->
<d:StartTime m:type="Edm.DateTime">2014-03-21T00:00:00</d:StartTime>
<d:EndTime m:type="Edm.DateTime">2014-03-25T23:59:00</d:EndTime>
<d:AllDayEvent m:type="Edm.Boolean">true</d:AllDayEvent>
I have a report in the same SharePoint 2010 site that uses SSRS in integrated mode. The data source is the calendar list mentioned above. The date fields are not formatted, just displayed as them come from the list/database.
My locale is set to en-US. When I run the report, the start date for item 1 is displayed as "3/21/2014" ('all day' set to false) but the start date for item 2 is displayed as "3/20/2014" which is incorrect ('all day' set to true).
I did some research online and found out that SharePoint stores all date fields as UTC except for 'All Day Events', which are stored in local time (our servers are in Central Time, but I'm running the report fom Pacific Time, in the US).
I coudn't find a solution to display the date correctly in the integrated SSRS report. Is there a way, maybe some straightforward formatting, to show All Day Event dates correctly? I tried adding hours but this is inconsistent with daylight saving hour changes.
I would appreciate any help.
C#, SharepointHi SharpBud,
The date for all day event stored in SQL in GMT time, the start time for an all day event returns the start time in GMT time, which is not the current time most likely.
This is a confirmed issue, as a workaround, I would suggest you to use a calculate column for the event for the column, using the following format:
IF(TEXT(([End Time]-[Start Time])-TRUNC(([End Time]-[Start Time]),0),"0.000000000")="0.999305556",IF([Start Time]=ROUND([Start Time],0),[Start Time],DATE(YEAR([Start Time]),MONTH([Start
Time]),DAY([Start Time])+1)),[Start Time])
Thanks,
Qiao Wei
TechNet Community Support -
How to filter the Event Data from the EventHub when consuming data?
We know the EventHub has the filter function. I'm designing a new solution for a customer and it looks like EventHubs are great for sending and receiving our near-realtime
data. Downside is when receiving the data, we receive all data of all our devices in the world. Most of the time, our clients only want to see data of one (or a few) device. We could of course filter the data by ourselves, client side, but
this would cost a lot of bandwith.
From the
FeedBack, it said Filters will be tied to Consumer Groups. And I Check the Consumer Group Class, it has the Create Time and Update Time, but it
has no set Function,
So how to use the Consumer Group to filter Event Data during the Receiving data?
Because in our solution, we use the EventHubHost to consume data, if our service bus worker role restart, we will receive all data in the EventHub, but we only want
to receive the latest data,
If we use the EventHubHost to consume data, can we also to filter data? If yes, how to do?
Thanks very much!Yes right,
AFAIK there isn't a filter feature for Event Hub. The only way to have now is to put a specific property inside your EventData that consumer group can check to filter if it is interested in the data or not.
Paolo.
Paolo Patierno -
Event Handling in labview with arrays as event data
Hey folks,
I have a Labview Application which uses a dll to read Ethernet data. The setup is such that, when the dll has fresh data it sends out an event to the Labview Application so that the fresh data can be displayed.
However i have only managed to get this event based mechanism to send out a single structure at a time. Hence if there are 10 fresh data values, i need to send out 10 events (each event structure contains the parameter name, parameter value, unit and time stamp). It would be more efficient to send out an array of structures in a sigle shot.
I have tried this but Labview keeps crashing saying that an error was encountered and Labview needs to close along with an access violation message. I did a lot of online searching and found some LV code for event handling but not come accross any implementation which uses arrays as evend data. Is this supoorted? And if so is there any example vi that can be shared so that i get some knowledge about this.
Many Thanks in adavance,
Abel.I also gave a try by using a variant as the event data type instead of the cluster which contains the array of floats. I converted the cluster into a variant and used that to create the user event reference. Followed the same logic while decoding the dats.
But still the crash.... Here is the windbg output...
ModLoad: 07580000 075b7000 C:\Program Files\National Instruments\LabVIEW 2012\resource\lvalarms.dll
ModLoad: 0ca90000 0cb72000 C:\Program Files\National Instruments\LabVIEW 2012\resource\mesa.dll
ModLoad: 0c7f0000 0c7f9000 C:\Program Files\National Instruments\LabVIEW 2012\resource\lvuste.dll
ModLoad: 35000000 3509b000 C:\Program Files\National Instruments\Shared\TDMS\tdms.dll
ModLoad: 0c860000 0c87c000 D:\SapphireViewer\dll\SapphireClientDll.dll
ModLoad: 0e240000 0e2c7000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.6195_x-ww_44262b86\MSVCP80.dll
ModLoad: 0e2d0000 0e36b000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.6195_x-ww_44262b86\MSVCR80.dll
(1cb0.1a34): Access violation - code c0000005 (first chance)
First chance exceptions are reported before any exception handling.
This exception may be expected and handled.
eax=0e47f8b4 ebx=051f0040 ecx=051f0040 edx=061e5764 esi=22820840 edi=07b10040
eip=03c2050c esp=0e47f5cc ebp=0e47f810 iopl=0 nv up ei pl nz na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010202
*** ERROR: Symbol file could not be found. Defaulted to export symbols for C:\Program Files\National Instruments\LabVIEW 2012\resource\tdcore_12_0.dll -
tdcore_12_0!LvVariant:etContents+0xac:
03c2050c 837e3100 cmp dword ptr [esi+31h],0 ds:0023:22820871=????????
I cannot really tell whats going on. Looking for some pointers.
Regards,
Abel. -
Event Data Change triggering process hangs in the process chain
Hi,
In a daily running process chain we have an event data change trigger for broadcast setting which goes to long running status very often and ultimately we have to cancel the job in precalcserver and manually execute the reports based on it. This step fails very often and rarely it gets executed in the chain with a green status. I want to know the reason for the failure and the solution for permanent fix.
On digging through the respective logs thru SLG1 I found the following error messages for the same. Please find it below if it can help u in analysis
Any inputs will be a great help!!
Thanks
Kavyait's related to precal server, I guess it failed due to lack of memory or setting issue.
Please do following
1 Clear all precal server pendings
2 After this, restart the server.
3 Execute again. -
Event Data Change step- Failure
Hi All,
I have a failure in event data change process in a process chain.
It has identified 2 packages for change.
One package has successfully been done.
While processing of second package, the job BCAST**** failed as logon to BW system with user ID specified failed.
I know that the user-id does not exist., but am not able to find out of where the to change the user id for the job BCAST*** to run successfull.
when i click displaying messages, it shows
Step 001 started (program RSPROCESS, variant &0000001212711, user ID BWEXTRACT)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job
BIBCAST4AN61630VW21F4LTLVP2QED68 with ID 08254800
The job BIBCAST4AN61630VW21F4LTLVP2QED68 failed as logon was not possible.
Please suggestHai ,
Its right you get the owner name in the table after changing the right user id there .
In broadcast setting screen itself say for EX broadcast email
below you give the recepient address
after that you have the Authorization user box where you can directly change to right id if you have the proper authorization attached to your user id .Remmember to save then schedule & execute when you trigger for first time.
This step is related to the role attached to your user access ask basis guy or instead of transporting from development do the broadcast setting directly in production with right EP access.
hope it would sove your issue. -
Event data change is process chain
Hi guys,
i got a problem with my Event data change in my process chain which gives me the error
"Background management: timeout or termination of job BCAST486IO7Q8PXOXKE9OV9HOSCGTO"
when you check in the background it says the job is finsihed
can any one help me out on this how is fix this
points will be assigned
cheers
dpDear DP,
i think u have to repair or repeat the chain.... by clicking the context menu
Regards
venu -
ICal Alarm - Pass Event data to AppleScript?
Is there a way that a script called by an iCal alarm can be passed event data as parameters?
This is a quick one I knocked up a while back to see if it was possible. The problem is that iCal doesn't tell the script what event triggered it, so you have to go looking ...
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">(*
called from iCal as on alarm, will speak the title of the alarm event
won't work for repeating events
AK ITCarlow Nov 2004
set Now to current date
-- Adjust FuzzSeconds to suit; if too big, close events will speak several times
set FuzzSeconds to 15
tell application "iCal"
set MyEvents to every event of every calendar where ((start date of it) ≥ (current date))
repeat with ThisEvent in MyEvents --scan the list looking for events that have triggered us
try
set MinutesBefore to (trigger interval of open file alarm of ThisEvent) as number
set TriggerInt to (Now - ((start date of ThisEvent) + 60 * MinutesBefore)) --notionally 0 for firing event
if (TriggerInt < FuzzSeconds) and (TriggerInt > (-FuzzSeconds)) then
say (summary of ThisEvent as text) & " at " & (start date of ThisEvent as text)
--could say other fields too eg location, description ...
end if
end try
end repeat
end tell
</pre>
AK -
A way to access SVG event data for an object?
Is there a way to access the SVG event data for an object through scripting?
post this in the correct forum - you will get a better response (btw the correct forum is KVM)
to answer your question - any extra functionality above the MIDP1.0 specification will be manufacturer specific (and as such hardware dependant)
I only know 2 of the APIs extensivly (the Nokia and Siemens) neither of these offer access to the phonebook or the message folder (it would be a security risk) I don't think they provide the cell id either.
and no, there is no way to access the cellular phones OS. (on any phone!) it would completely destroy the purpose for having java on the phone. -
Hi Gurus,
I am trying to include Event data changes in Process chain and as soon as data load completes want trigger a report with broadcast settings. When i execute process chain, Chain is failing at Event data changes process type with below error.
<i><i>Error log:
Java system error: call FM RSRD_X_PRODUCE_PROXY to ProgId BP1TULAP424_PORTAL_WSH on host BP1TULAP424 with SSO not authorized: Missing Password
Message no. RSBOLAP018
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.</i></i>
Am i missing some step, i already have Help SAP link, But all steps defined in the process are configured already. Any help greatly appreciated.
Best Regards,
Reddy.Hi,
Have you checked the authorization for scheduling the broadcaster??
Check the below authorization object ..
S_RS_BCS :
(RS_OBJTYPE )ObjectType: Query/Template/Workbook
(RS_OBJID )ObjectID : QueryID/TemplateID/WorkbookID
(RS_EVTYPE)EventType : DataChange or Timepoint
(RS_EVID )EventID : Infoprovider or Timepoint name
are you sending anyworkbook through broadcaster? if so, you have to install precalculation server..
Regards,
Siva. -
I like the way Iphoto arranges photos into Events, which are displayed in date sequence.
I am about to start scanning my old slides, but I would like them to appear for example under 1971.
How can I arrange that?It's a little tedious but this works.
iPhoto gets these details from the Exif of the photo. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. However, scanned images don't have Exif - and indeed, it would be off from the date of the photo if it did.
So: Scan all your 1971 images. Scan the images to a folder on the desktop. When the scanning is done, import that folder to iPhoto. An Event will be made of it but the date will be incorect.
So, in that Event select all the Photos and go Photos -> Batch Change and set the date to something in 1971. If you don't have specific dates for the particular photos, just choose a 'catch-all' Jan 1, June 30, whatever.
Now all the photos have a 1971 date, but the Event date is still wrong.
So, select all the Photos again and go Events -> Create Event
Regards
TD -
Hi,
How to read event data in workflow process? I have created a event and subscribed that event to existing Itemtype.As per the workflow document, i can read the event message thru. Item attribute.But this is not working. Also,Messages are not de-queued from the queue.
Thanks
SarmaHi,
If my understanding is correct, you have done the following:
1. Created and Event
2. Creates a subscriptions and specified the Item Type and the Process
This alone is not sufficient to send the event to the workflow process, You will need to add a "Receive Event" activity in the process which you have specified in the subscription.
When you configure the receive event activity, you must specify the event name to be received and you will have the ability to store the event name, event key and the event data as item attributes.
For more information, please refer to the workflow guide.
Hope this helps,
Raja -
IPhoto Events 'date range' have ALL changed by 16 yrs+
I'm very new to iMac (from Windows) and when I was editing some Events in iPhoto somehow I've managed to change all the Events to a random date range of 'now to 16yrs +' ... Is there a way that I can revert to the a previous version for dates of Events or will I have to copy a back-up version from Time Machine into iPhotos? I have 6000+ photos and any help would be appreciated!
Thanks for reply .. yes, I'm talking about the Event date (I think it is in grey underneath the key photo in Event view). I think when I was updating the date range of a couple of Events (that were showing a date range back to 1993 at the time) I inadvertantly applied a new date range to ALL of my Events (not sure how I did that).
I've read a few posts about 'bugs' but I think if have the most recent update!
Some of the more recent Events I can manually amend but for those photos that are quite a few years old, it now displays a date range - in some cases up to 2028 - and I would like to be able to see the 'original' date that the photo was taken.
I am on iPhoto 11 (9.1.5) and using Lion OS.
I have checked System Preferences> Date & Time and I don't appear to have a 'custom' date/time preference.
Maybe you are looking for
-
Time Machine deleted all the files on my external HD
I have started a new Time Machine backup on a larger external HD. Time Machine deleted the folders and files stored in that HD before starting the backup procedure. How can i recover the files i had on my HD? Thank you!
-
Why am I having issues with the background image here?
body { text-align:left; font-family:Tahoma, Geneva, Helvetica, Arial, sans-serif; font-size:11px; line-height:17px; color:#8a8683; margin:0; padding:0; * html body { overflow:hidden; * html div#content { height:100
-
Dear All, In our company users are creating a SES with posting date and document date prior to creation date of Purchase order. In realisitc it should not happen. How can i restrict users for entering Doc date and posting date in SES only after creat
-
We're using SRM 5.0, and need to evaluate options for creating Contracts for services, and having PO's sourced against the contracts for services provided over the course of the contract validity period. Any suggestings or resources that explain how
-
every time i record my electric guitar in garageband, it pops up saying it detects feedback and it stops recording. I have tried using headphones and ive tried it without headphones. is there any way to stop the feedback so the sound isnt muffled???