Event ID 207 Failed to generate publishing metadata

Hello All,
On the publishing server, I see this error (Event ID 207) - Failed to generate publishing metadata. Reason: The underlying provider failed to Open. Not sure what to look for and how to fix the issue.
I am able to add packages within the Management Server and when, I refresh publishing server the package ID shows up. On the client side the package is available.
I just want to fix the error, if it is possible and get rid of this event ID 207 from the event viewer.
Thanks
RL

Are the publishing and management service on the same machine? Sounds like a WCF-related error.
Steve Thomas, Senior Consultant, Microsoft
App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
http://blogs.technet.com/gladiatormsft/
The App-V Team blog: http://blogs.technet.com/appv/
The MED-V Team Blog: http://blogs.technet.com/medv
The SCVMM Team blog: http://blogs.technet.com/scvmm/
“This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”

Similar Messages

RH7 Error: Failed to read from log... Failed to generate WebHelp Pro

Installed RH9 trial on Windows XP PC. Then, generated an existing project using RH7 to a new C: drive directory location on the PC using the same name. Renamed the project files in that C:drive directory to a test name and opened the project's .xpj file in RH9. It converted cleanly.
Now, when I go to generate the RH7 original project from the original server directory, I receive:
Error: Failed to read from log (file name) .log.... Internal error encountered, Failed to generate WebHelp Pro.
Does the log file keep track of the previous generation (time stamp,etc), since this RH7 generation has a skip in it for the one generated to the C:drive? I've compared the log files from each run (.txt files) and don't see a difference. I even copied the log file from the C:drive run to the Server directory. No luck. Any ideas?

Hi John,
Thanks for the prompt response. I am trying to evaluate RH9 / RH Server 9.
When I generate RH7 projects, I’ve always put the server (RH7 Server) directory reference in the ‘Output Folder and Start Page’ field. This directory reference is where the compiled output ends up right? In my case, it’s in that field as:
PBSrobohelp\D$\RoboHelp <file:///
PBSrobohelp\D$\RoboHelp> Web Files\PBS Unit Processes Manual. I’m not aware of a C:Drive local copy of the files. Doesn’t it go out to the server output for the .log file in question?
For the test, I took an existing project in RH7 and replaced this server reference with a C:Drive local hard drive directory reference and ran the output to it. Then I went to the C:Drive directory and changed the project name, because there doesn’t appear to be a way to do a ‘save as’ on a project – RH7 wants to keep that name badly. I then, shutdown RH7 and started RH9. I opened the .xpj file from the new test project copy. It recognized that it was from an older release and it converted the test copy to RH9. It converted cleanly with about 2 inconsequential document warnings but did not create a TOC. I looked it over and saved it in RH9 – it was already my test name.
The original RH7 project opens fine in RH7 and the Test RH9 project opens fine in RH9. So I think I have a good test copy. It’s just that when I point the RH7 original to the Server Output folder (which has its files) it gets the error on generation.
We are evaluating RH Server 9 but I haven’t attempted to publish anything to it yet. I’ve stayed purely on my desktop.
Hope this clears it up.
Jim
Jim Dages
Business Professional Technician III
University of Colorado, Payroll & Benefit Services
1800 Grant St, Suite 400
Denver, CO 80203
t. 303-860-4230
f. 303-860-4299
   Please consider the environment before printing this e-mail.
CONFIDENTIALITY NOTICE - This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner. Thank you.

Event monitor cannot find PowerShell generated events

I have a basic event monitor that only looks for an event ID and source. The event I am monitoring is generated via Powershell from a remote system rather than being locally created. I'm not sure if that matters, but it sure seems like it.
If I change the event expression in the monitor to look for other events it will generate alerts, it just cant see my PS events. I've tried changing the ID number, the source, using different params, etc... I'm convinced that this is due to the event creation
process and PS must be creating the event in a different manner than SCOM is looking for. Maybe its a bug where SCOM just ignores events created by proxy.
I found this: http://www.systemcentercentral.com/monitoring-events-written-from-a-remote-server-with-scom/
But that is for Rules. I still tried adding <AllowProxying>false</AllowProxying> to the XML of the MP...SCOM didn't like
it.
Has anyone ran into this before?
We are using SCOM 2012R2 fully updated.
- Slow is smooth and smooth is fast.

I guess I should have been more specific. I am using PowerShell to create an event, it isnt an actual PowerShell event.
write-eventlog -computername Server -logname Application -source Orchestrator -eventID 1 -message "This is an example of the events created with PS that SCOM cannot detect."
Maybe I should explain what I'm doing. I have an Orchestrator runbook that does stuff with things. If one of the runbook activities fails, it will send an event to the machine it was trying to run the activity on. SCOM is monitoring for that PowerShell generated
event stating that the runbook failed.
- Slow is smooth and smooth is fast.
I think you haven't native source "Orchestrator" in PoSh log.
Vladimir Zelenov | http://systemcenter4all.wordpress.com
I run a New-EventLog command first to create the Orchestrator source. Otherwise the Write-EventLog command would fail if the source wasn't there. I can see the event there in the logs.
- Slow is smooth and smooth is fast.

ERROR BPMA File Generator Failed to generate the EPMA import file

Hi,
I am facing the below error while extracting the metadata from the Planning Application using EPMA File Generator.
ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found
I am getting 0 byte file.Pls suggest.
Is there any other way to extract the Planning application metadata?
The log is:
[Header]\r\n2010-08-23 14:24:54,484 [5900] DEBUG BPMAFileGenerator Initializing Component
2010-08-23 14:24:55,687 [5900] DEBUG BPMAFileGenerator HyperionHome: D:\Hyperion
2010-08-23 14:24:55,687 [5900] DEBUG BPMAFileGenerator HelpFile: D:\Hyperion\common\docs\en\epma\file_generator\launch.html
2010-08-23 14:27:42,309 [5900] INFO BPMAFileGenerator SelectedTabIndex: 3
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmWebServer.Text: http://localhost/HFM
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpWorkspaceURL.Text: http://lgwapp081.uk.baa.com/workspace/index.jsp
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpWebServer.Text: http://lgwapp081.uk.baa.com:8300/HyperionPlanning/
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpUserName.Text: admin
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpApplicationName.Text: PLNAPP
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpClusterName.Text: lgwapp081.uk.baa.com
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpBPMAImportFileName.Text: C:\Documents and Settings\lgwappharrisonb-gal\My Documents\EPMAImport.ads
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator ShfmWebServer.Text: http://localhost/HFM
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmBPMAImportFileName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator bpmaApplicationName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator bpmaUserName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator bpmaWebServer.Text : http://localhost/hyperion-bpma-server
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator bpmaImportFileName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator profileFileName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator securityFileName.Text :
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator metadataFileName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmFilesImportFileName.Text :
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator dimensionPrefix.Text:
2010-08-23 14:27:42,793 [5900] ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator SelectedTabIndex: 3
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmWebServer.Text: http://localhost/HFM
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpWorkspaceURL.Text: http://lgwapp081.uk.baa.com/workspace/index.jsp
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpWebServer.Text: http://lgwapp081.uk.baa.com:8300/HyperionPlanning/
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpUserName.Text: admin
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpApplicationName.Text: PLNAPP
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpClusterName.Text: lgwapp083.uk.baa.com
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpBPMAImportFileName.Text: C:\Documents and Settings\lgwappharrisonb-gal\My Documents\EPMAImport.ads
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator ShfmWebServer.Text: http://localhost/HFM
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmBPMAImportFileName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator bpmaApplicationName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator bpmaUserName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator bpmaWebServer.Text : http://localhost/hyperion-bpma-server
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator bpmaImportFileName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator profileFileName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator securityFileName.Text :
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator metadataFileName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmFilesImportFileName.Text :
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator dimensionPrefix.Text:
2010-08-23 14:28:56,651 [5900] ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator SelectedTabIndex: 3
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmWebServer.Text: http://localhost/HFM
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpWorkspaceURL.Text: http://lgwapp081.uk.baa.com/workspace/index.jsp
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpWebServer.Text: http://lgwapp081.uk.baa.com:8300/HyperionPlanning/
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpUserName.Text: admin
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpApplicationName.Text: PLNAPP
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpClusterName.Text: lgwapp083.uk.baa.com
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpBPMAImportFileName.Text: C:\Documents and Settings\lgwappharrisonb-gal\My Documents\EPMAImport.ads
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator ShfmWebServer.Text: http://localhost/HFM
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmBPMAImportFileName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator bpmaApplicationName.Text:
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator bpmaUserName.Text:
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator bpmaWebServer.Text : http://localhost/hyperion-bpma-server
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator bpmaImportFileName.Text:
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator profileFileName.Text:
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator securityFileName.Text :
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator metadataFileName.Text:
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator hfmFilesImportFileName.Text :
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator dimensionPrefix.Text:
2010-08-23 14:30:11,275 [5900] ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.
[Footer]\r\n[Header]\r\n2010-08-24 14:50:12,606 [10620] DEBUG BPMAFileGenerator Initializing Component
2010-08-24 14:50:13,528 [10620] DEBUG BPMAFileGenerator HyperionHome: D:\Hyperion
2010-08-24 14:50:13,528 [10620] DEBUG BPMAFileGenerator HelpFile: D:\Hyperion\common\docs\en\epma\file_generator\launch.html
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator SelectedTabIndex: 3
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmWebServer.Text: http://localhost/HFM
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpWorkspaceURL.Text: http://lgwapp081.uk.baa.com/workspace/index.jsp
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpWebServer.Text: http://lgwapp081.uk.baa.com:8300/HyperionPlanning/
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpUserName.Text: admin
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpApplicationName.Text: PLNAPP
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpClusterName.Text: lgwapp081.uk.baa.com
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpBPMAImportFileName.Text: C:\Documents and Settings\lgwappharrisonb-gal\My Documents\EPMA\EPMAImport.ads
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator ShfmWebServer.Text: http://localhost/HFM
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmBPMAImportFileName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator bpmaApplicationName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator bpmaUserName.Text:
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator bpmaWebServer.Text : http://localhost/hyperion-bpma-server
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator bpmaImportFileName.Text:
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator profileFileName.Text:
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator securityFileName.Text :
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator metadataFileName.Text:
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator hfmFilesImportFileName.Text :
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator dimensionPrefix.Text:
2010-08-24 14:53:26,884 [10620] ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator SelectedTabIndex: 3
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmWebServer.Text: http://localhost/HFM
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpWorkspaceURL.Text: http://lgwapp081.uk.baa.com/workspace/index.jsp
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpWebServer.Text: http://lgwapp081.uk.baa.com:8300/HyperionPlanning/
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpUserName.Text: admin
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpApplicationName.Text: PLNAPP
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpClusterName.Text: lgwapp083.uk.baa.com
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpBPMAImportFileName.Text: C:\Documents and Settings\lgwappharrisonb-gal\My Documents\EPMA\EPMAImport.ads
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator ShfmWebServer.Text: http://localhost/HFM
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmBPMAImportFileName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator bpmaApplicationName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator bpmaUserName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator bpmaWebServer.Text : http://localhost/hyperion-bpma-server
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator bpmaImportFileName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator profileFileName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator securityFileName.Text :
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator metadataFileName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmFilesImportFileName.Text :
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator dimensionPrefix.Text:
2010-08-24 14:56:47,520 [10620] ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.
Thanks,
BC

Yes I tried to run it on server but still getting the same error.The Status message is:
1 Validating EPMA import file Successful...
2 Generating EPMA file Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.

R12 : System Failed to generate the PDF Document.

I am trying to create a PO thru auto create but I hit inquire > View Document , I encountered an error: System Failed to generate the PDF Document. Please contact your system administrator. We just updgrade our instance from 11.5.2.10 to r12.1.2. Any thoughts?
Thanks,
Leo

Please see if these docs help.
System Fails To Generate PDF Document After Clicking "PDF Document" On Supplier Notification When Different Languages Are Used [ID 1078546.1]
PO Email From Tools>Communicate At Same Time of Approval Corrupts PDF File Transmits As .HTML & System Failed to Generate PDF [ID 1287488.1]
Thanks,
Hussein

How to generate & publish webhelp html files in different folder than default folder

Hi All,
I am new to robo help. I have a requirement to generate & publish webhelp html files in a different folder than default folder.
Could anyone please tell me the steps to change the folder
Thanks
Rashmi

You change the generate folder and filename in the first field on the first page of the wizard. It must be a folder on your hard disk.
You change the publish folder in the last page of the wizard. Anywhere you like.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Event 03 in table maintenance generator

Hello All,
I have created a event 03 in table maintenance generator. Because I need to check if the deleted key is still referenced in an other table.
I tried the following code, but only if I use the message the entry will not be deleted.
MOVE uebergehen TO <mark>.
MODIFY total INDEX sy-tabix.
<xmark> = <mark>.
MODIFY extract INDEX nextline.
IGNORED_ENTRIES_EXIST = abap_true.
* MESSAGE e000 WITH 'Entry not allowed to delete'.
Thanks in advance.
Marcus

had to put it in a generic form, hope it still works:
FORM event_03.
TYPES: BEGIN OF typ_extract,
           zview TYPE zview,   "or ztable, the one with the maintenance dialog!
           flags TYPE vimtbflags,
         END OF typ_extract.
DATA: ls_extract TYPE typ_extract.
* loop at marked lines
LOOP AT extract INTO ls_extract.
    CHECK ls_extract-flags-vim_mark EQ 'M'.
*   place existence check here!
*   using the values in ls_extract-zview-...
*   if value still being used, send message
    IF sy-dbcnt > 0.
      MESSAGE i...
      ls_extract-flags-vim_mark = '*'.
      MODIFY extract FROM ls_extract.
    ENDIF.
ENDLOOP.
ENDFORM.

Acrobat Pro XI V11.0.2 - Word 2010 to PDF conversion fails to generate header text

Hello,
Following the recent update to V11.0.2, the Acrobat PDF converter for Word 2010 fails to generate the output document correctly. It misses out the text box part of the Word header.
However, using Acrobat XI via the "Print to PDF printer" appears to generate the output file correctly.
System is Windows XP-SP3 with Office 2010 (and all current updates), plus Acrobat Pro V11.0.2
Example Word source and resulting PDF are available, if anyone can figure out how to use this web interface to post examples.
Colin Butcher.

Hello,
No, there is no change in behaviour on my Windows XP machines, nor would I expect there to be given that there has been no change until V11.0.3 was released.
Given that you’ve reproduced the problem, albeit on a different machine, it seems reasonable to assume that the problem is related to Acrobat. If you can reproduce the behaviour, then you should be able to fix it.
The problem still exists with V11.0.3. I look forward to it being resolved shortly.
Colin.
PS: Attempting to reply to the e-mail notification using the '[email protected]' address fails with:
<[email protected]>: host 10.168.5.42[10.168.5.42] said: 553 <[email protected]> address unknown. (in reply to RCPT TO command)

Xrpcc fails to generate wsdl

I followed the example to generate the HelloWorld jaxrpc example. xrpcc failed to generate a wsdl document. No clues were given as to why.
I am also trying to invoke the HelloWorld service from Microsoft .Net. Is there any sample code available?
Any help would be appreciated.

in generating a .net client your life becomes a lot easier, just point the wsdl executable at the .wsdl file and you're done. all you have to do is plug the generated class into your application. it's so much easier than the recent java implementations - it's embarrasing

Handling events in javascript which are generated by embedded applet

I am having an tipical requirement , In my HTML page there is an embedded applet . This applet is going to generate custom events . I would like to handle that events in javascript which are generated from applet . I mean that javascript has to get a notification of the event that is generated from applet . I would appreciate if some one can send me the code .

Hi look at my post further down about 5-6 posts. It's called: "For your information. Very interesting." It talks about Netscapes Live Wire.

The command oracg fails to generate Java source files

I tried to use the command 'oracg -schema Openshipments.xdr' to generate Java source files from
XML schema file Openshipments.xdr . Although the schema file is valid, the command oracg fails with following error messages :
file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
XSD-2026: (Error) Invalid attribute 'name' in element 'element'
file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
XSD-2030: (Error) Element 'schema' has invalid namespace:
'urn:schemas-microsoft-com:xml-data'
file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
XSD-2027: (Error) Invalid element 'ElementType' in
'schema'file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column
47>: XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
XSD-2027: (Error) Invalid element 'ElementType' in
'schema'file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column
47>: XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
file:/D:/romel/project/UPS/doc/Openshipments.xdr<Line 6, Column 47>:
XSD-2027: (Error) Invalid element 'ElementType' in 'schema'
...... the above line is repeated many times
Error: Schema Class Generator failed to generate classes.
oracle.xml.parser.schema.XSDException: Invalid attribute 'name' in
element 'element'

Your schema is not a valid XML Schema. Please check up with the syntax.
Thanks.

Problems with bursting that fail to generate PDF, but still sends email!

per subject. Essentially I have built a test where the bursting engine is emailing recipients, however the bursting engine is somehow failing to generate a PDF output. The bursting engine essentially fails and I can capture the error, but emails are still sent and without attachments!
Captured exception:
[050106_095850822][oracle.apps.xdo.batch.DeliveryHelper][EXCEPTION] java.io.FileNotFoundException: /tmp/050106_095850733/63.pdf (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java(Compiled Code))
at java.io.FileInputStream.<init>(FileInputStream.java(Inlined Compiled Code))
at Oracle.apps.xdo.batch.DeliveryHelper.getEmailDeliveryRequest(DeliveryHelper.java(Compiled Code))
at oracle.apps.xdo.batch.DeliveryHelper.addRequest(DeliveryHelper.java(Compiled Code))
at oracle.apps.xdo.batch.BurstingProcessorEngine.deliverDocumentOutput(BurstingProcessorEngine.java(Compiled Code))
at oracle.apps.xdo.batch.BurstingProcessorEngine.processDocument(BurstingProcessorEngine.java(Compiled Code))
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(BurstingProcessorEngine.java(Compiled Code))
at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(BurstingProcessorEngine.java(Inlined Compiled Code))
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(BurstingProcessorEngine.java(Compiled Code)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java(Compiled Code))
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java(Compiled Code))
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java(Compiled Code))
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java(Compiled Code))
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(BurstingProcessorEngine.java(Compiled Code))
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(BurstingProcessorEngine.java(Compiled Code))
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(BurstingProcessorEngine.java(Compiled Code))
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java(CompiledCode))
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java(Compiled Code))
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java(CompiledCode))
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java(Compiled Code))
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(BurstingProcessorEngine.java:1191)
at oracle.apps.xdo.batch.DocumentProcessor.process(DocumentProcessor.java:213)
at xxsyk.oracle.apps.xxsyk.xdo.server.BurstingEngine.process(BurstingEngine.java:410)
at xxsyk.oracle.apps.xxsyk.xdo.servlet.BurstingEngineServlet.doGet(BurstingEngineServlet.java:56)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:499)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:570)

To prevent emails from being sent, I implemented the BurstingListener and would check for the existance of document files. If they don't exist, I throw a NullPointerException which kills the bursting process without causing an email to be sent. My implmentation is as follows:
public void afterProcessDocument(int requestIndex,int documentIndex, Vector documentOutputs) {
// Fetch the attachments file locations.
Object[] arr = documentOutputs.toArray();
// We will flag if any files could not be found.
boolean fileNotFound = false;
// Loop for each temp document file...
for (int i = 0; i < arr.length; i++) {
// Report on this file's existance and raise a flag if not.
File file = new File((String)arr);
if (!file.exists()) {
fileNotFound = true;
// OK, there was a problem so force the bursting engine to abort.
if (fileNotFound)
throw new NullPointerException("Bursting Engine did not process some or all documents.");

Failed to Generate Wrapper Class Error With Postgresql

Hello,
Sorry if this comes across twice, I posted it first through the Google Groups interface, but I haven't seen it show up on the dev2dev forum interface. So here it is again.
I've read the following threads that seem to be related to this
question:
http://groups-beta.google.com/group/weblogic.developer.interest.jdbc/browse_thread/thread/dc8f0a9ee03e9b9f/f0a70a673db3bb52
http://groups-beta.google.com/group/weblogic.developer.interest.jdbc/browse_thread/thread/4f3b71c77dca30c4/4ed2e1c7b76a0c7b
I also followed the links in the second post ( I also found them via
Google as well ). I've been very sure the Postgresql JDBC driver is
definitely in the class path. I'm able to load it with Class.forName()
from a JSP page and then use DriverManager to get a connection that
works. So that definitely means the driver is found.
What else can cause this?
The only really odd thing I am doing is running Weblogic on OS X,
10.3.7 with all the updates. I know that this Weblogic setup works
since I work on Oracle all day (using the provided Weblogic driver in
8.1SP3). Just when I try to create a Postgresql connection for testing
our app against Postgresql.
I've tried it on Windows with Weblogic 8.1SP3 and it works, so I know
Weblogic is capable of using this driver.
My exact stacktrace is:
java.lang.RuntimeException: Failed to Generate Wrapper Class
at
weblogic.utils.wrapper.WrapperFactory.createWrapper(WrapperFactory.java:183)
at
weblogic.jdbc.wrapper.JDBCWrapperFactory.getWrapper(JDBCWrapperFactory.java:171)
at weblogic.jdbc.pool.Driver.allocateConnection(Driver.java:248)
at weblogic.jdbc.pool.Driver.connect(Driver.java:164)
at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:507)
at weblogic.jdbc.jts.Driver.connect(Driver.java:139)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
at jsp_servlet.__direct._jspService(direct.jsp:13)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:463)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6452)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
at weblogic.jdbc.jts.Driver.wrapAndThrowSQLException(Driver.java:458)
at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:511)
at weblogic.jdbc.jts.Driver.connect(Driver.java:139)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
at jsp_servlet.__direct._jspService(direct.jsp:13)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:463)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6452)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
What is going on at the place where this crashes? Is there a way find
out what class it really can't find?
Thanks,
Patrick

Patrick,
1. Could you try to test the postgress connection pool using
"Test Connection" on the pool set up page?
2. Could you compare config.xml for broken and working installations
in part of the connection pool settings?
Regards,
Slava Imeshev
"Patrick Burleson" <[email protected]> wrote in message
Sorry if this comes across twice, I posted it first through the Google Groups interface, but I haven't seen it show up on thedev2dev forum interface. So here it is again.
>
I've read the following threads that seem to be related to this
question:
http://groups-beta.google.com/group/weblogic.developer.interest.jdbc/browse_thread/thread/dc8f0a9ee03e9b9f/f0a70a673db3bb52
http://groups-beta.google.com/group/weblogic.developer.interest.jdbc/browse_thread/thread/4f3b71c77dca30c4/4ed2e1c7b76a0c7b
I also followed the links in the second post ( I also found them via
Google as well ). I've been very sure the Postgresql JDBC driver is
definitely in the class path. I'm able to load it with Class.forName()
from a JSP page and then use DriverManager to get a connection that
works. So that definitely means the driver is found.
What else can cause this?
The only really odd thing I am doing is running Weblogic on OS X,
10.3.7 with all the updates. I know that this Weblogic setup works
since I work on Oracle all day (using the provided Weblogic driver in
8.1SP3). Just when I try to create a Postgresql connection for testing
our app against Postgresql.
I've tried it on Windows with Weblogic 8.1SP3 and it works, so I know
Weblogic is capable of using this driver.
My exact stacktrace is:
java.lang.RuntimeException: Failed to Generate Wrapper Class
at
weblogic.utils.wrapper.WrapperFactory.createWrapper(WrapperFactory.java:183)
at
weblogic.jdbc.wrapper.JDBCWrapperFactory.getWrapper(JDBCWrapperFactory.java:171)
at weblogic.jdbc.pool.Driver.allocateConnection(Driver.java:248)
at weblogic.jdbc.pool.Driver.connect(Driver.java:164)
at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:507)
at weblogic.jdbc.jts.Driver.connect(Driver.java:139)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
at jsp_servlet.__direct._jspService(direct.jsp:13)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:463)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6452)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
at weblogic.jdbc.jts.Driver.wrapAndThrowSQLException(Driver.java:458)
at weblogic.jdbc.jts.Driver.getNonTxConnection(Driver.java:511)
at weblogic.jdbc.jts.Driver.connect(Driver.java:139)
at
weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:305)
at jsp_servlet.__direct._jspService(direct.jsp:13)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:463)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6452)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
What is going on at the place where this crashes? Is there a way find
out what class it really can't find?
Thanks,
Patrick

Generate PUBLISH from other evenement than SIP message

hello,
In the SIP Servlet, is it possible to generate PUBLISH from other evenement than SIP message?
I mean for example i get connected to a page web, and i generate a message SIP PUBLISH while there is a update.
How can i do with this situation? Can anyone give me some guidance?
Thanks,
li

At some point in developing iOS apps you would need to use a Mac to upload the app to the App Store. If you have access to a Mac to do that you could also use the same Mac to download your certificate from the iOS developer portal. That certificate can be added to Keychain Access, where it’s very easy to export a P12 file.
If you’re doing the development for a client, have them download the certificate and export the P12 to send to you.

BI Publisher Metadata

I am trying to refresh the BI Publisher Metadata but doesn't seem to work.
I have added new columns to the business and presentation layer of the rpd and saved it. I could load the "BI Presentation Services" metadata with out any issues, but BI Publisher metadata is not getting updated.
Not sure what the issue could be.
I re-started the BI Server/Presentation Server services; synchronize the metadata using BI Publisher/Admin/Refresh Metada but no much luck. I can't see the newly added columns in the RPD.
Any help is greatly appreciated.
Regards
B

Sorry - I remembered that I have also had this once and wound up removing the entire table and then re-importing.
This cleared it, but I never got to the bottom of why it had not accepted it...
R.

Event ID 207 Failed to generate publishing metadata

Similar Messages

Maybe you are looking for