Event trace error: own logical system not defined ?

Hello,
i am trying to start a workflow when the status of a document changes to "completed". I was checking the event trace with transaction code : "SWEL" and i found out that the workflow is trying to start but there is some kind of error and the event trace is saying :
Your own logical system has not been defined for this client. Most of the ALE functions therefore cannot be used. No links can be written.
Any suggestiobns on what can be the problem ?
points are awarded
Regards

Sounds like you need to setup your client as a logical system, to do so..
To do setup the Logical System follow the following steps
In IMG Settings
Cross Applications -> Distribution (ALE) -> Basic Cofiguration.
Set up Logical System -> Maintain Logical System.
Create New Entries

Similar Messages

Logical system not defined in table SMOF_ERPSH!

Hello,
In the inbound queue of CRM, the queues are in 'SYSFAIL' status. The error message is ' logical system not defined in table SMOF_ERPSH!' .
the table has an entry for relevant ERP system.
I dont know where else to check.
I have checked the logical destinations on CRM and it is defined correctly.
can anyone help me here.
Regards,
Pratima

Hi Pratima,
I am also facing the same issue. I checked all the entries and Entries are there in the respective tables but still the same issue.
But if I delete the queue, the changes are replicated for that time but after some time again the queues are getting blocked with the same issue.
Pratima, can you please tell you whether your issue got fixed on this.
Thanks,
Sharath.

Logical system not defined.

Hello
Can some body help me to identify the issue which gives me an error,No Logical system for FI is manitained .
This error, I receive at the time of approving shopping carts.
Thanks.
Jayawant Gokhale

Hi,
Pls refer the foll threads:
PO transfer from SRM to vendor system
PDP issue - ext reqts missing in SRM system
External system to SRM
Re: Upload PO from XML file in SRM
BR,
Disha.
Pls reward points for useful answers.

Error in IDES while cratimg PO - Logical system not defined

Hi,
While creating PO in IDES , system is giving following error ,
"Logical system is not defined"
Pl suggest the solution,
Thanks a ton in advance,
NB

Hi
in BD54 Check have u defined logical system for client 800
for more details post ur prob. in SAP NetWeaver forum
Vishal...

Logical Path not defined..?

Hi,
I recently got CRM 5.0 installed on my system. Very first step of 'Maintain Business Partner' it says, 'Logical Path not defined'.
Tried to open activities, says' Logical system not defined'
Please suggest what is the problem & how to rectify this.
A prompt reply wil be highly appreciated.
Thanks
Anil

Hi ,
You need to Define Logical System for your System to Allow you to Execute Actions
Path:SAP Web Application Server>Business Intelligence>Links to Other Source Systems>General Connection Settings::
In this step, you can define the logical systems in your distributed system.
Caution:Logical systems are defined cross-client.
Activities
1. To create a logical system, choose Edit -> New Entries.
2. Enter a name for the logical system that you want to create.
3. Enter a description of the logical system.
Enter the Logical System that you are using,
These Links may Further Help up for Details:
http://help.sap.com/saphelp_crm50/helpdata/en/b4/b0b13bb3acef3ce10000000a11402f/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/55/38e74110cf0b7fe10000000a155106/frameset.htm
Hope it Answered your Queries..
Thanks and Regards,
RK.
Added Links for Further Help: RK on Mar 5, 2009 12:07 PM

Post installation error "Local logical system is not defined"

Hello everyone,
I freshly installed the latest SAP NetWeaver 7.01 ABAP Trial from scratch and like to configure ALE.
I followed thew steps of http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/CABFAALEQS/CABFAALEQS.pdf
(ALE Quick Start) but cannot get through the following step on page 12:
From the R/3 Implementation Guide screen in TA SALE
choose Basis
    Application Link Enabling (ALE)
      Modeling and Implementing Business Processes
        Maintain Distribution Model and Distribute Views
Clicking on Maintain Distribution Model or using TA BD87, I immedeately get the following error:
The initialization of the logical system has failed.
With TA BD64 the error: Local logical system is not defined arises. I also looked at
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi,
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1 and
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide describing the same actions
to find an explanation, but without success
I assume, the error does not occur because the trial version does not support it, but
because of other post installation activities that must be done.
I already created two logical systems and assigned them to newly created clients 100 and 200,
but this did not have any impact on BD87 and BD64 as i was hoping.
Does somebody know what to do here?
Thanks in advance and kind regards,
Andreas

Hi Naveed,
i made the following settings:
SCC4: new entries created
100     Sending System
200     Receiving System
SM59: new ABAP type 3 connections:
RFC_DEST_LS_100
RFC_DEST_LS_200
- Tab Logon & Security Logon user: current user (bcuser client 001)
Connection test is successful
- Technical Settings: target host: localhost
SALE: new logical systems created
LS_100
LS_200
SCC4:
double click on 100 Sending System   configured with logical system LS_100
double click on 200 Receiving System configured with logical system LS_200
kind regards
Andreas

Error: local logical system is not definied

Hallo,
when I start transaction bd64, I got following error:
"local logical system is not definied"
Can anybody help me please?
Regards
Stefan

goto SALE transaction and create logical system for your own system(System in which you are working)
Path
Idoc Interface/APllication Link Enabling->Logical Systems->Define Logical systems
Regards,
ravi
Edited by: Ravi Kanth Talagana on Jun 30, 2008 3:57 PM

IDOC error - Receiver of IDoc is its own logical system

hi,
i have a requiremnt to generate the IDOC for the same and same client. actually i have to get the data from application server and i have to generate the IDOC.
for this i have created a Zreport and passed the data from application server to segment and i called the
FM "MASTER_IDOC_DISTRIBUTE". after executing the Zreport, IDOC is generated and show the error
status as 29.i.e. Receiver of IDoc is its own logical system.
my logic is as follows.
MOVE 'LS' TO w_edidc-rcvprt.
MOVE 'SBECLNT130' TO w_edidc-rcvprn.
MOVE 'ISU_MR_UPLOAD' TO w_edidc-mestyp.
MOVE 'ISU_MR_UPLOAD01' TO w_edidc-idoctp.
pls let me know the solution for this problem.
Regards,
Balu

Hi Reddy,
please let me know how did u solve this issue, even i have the same requirement and am gettign status 29.
Thanks
Rakesh

ERROR B191 - IDoc has its own logical system as receiver

I everybody, i'm tryng to execute a package to charge a ODS from another ODS (Datamart) but the process ends with the error "IDoc has its own logical system as receiver", can you help me with is?
What should be the reason for this error? What can i make to solve it?
Thanks to all

Hi Reddy,
please let me know how did u solve this issue, even i have the same requirement and am gettign status 29.
Thanks
Rakesh

Error-logical system not created in client 001

Hi Experts,
When I was trying to delete the application from Administration Client its giving me the error "Logical system not found on client 001"
I created the Logical system in 001 but still same problem...
Did I do anything wrong during the installtion??
Can anyone please help me
Bobby

Hi Experts,
I get the same error "Logical system not created in client 001"when I try to delete the appset from backend using program UJS_ACTIVATE_CONTENT...
Please suggest..
Thanks
Bobby
Edited by: bobbydon on Jul 7, 2010 7:46 PM

Event DRAW CHANGED for task TS90000016 not defined as start/end event

Hello,
i have created a workflow with one task, this task is of object type DRAW and the method is CHANGED. and i want to trigger this task when the status of a document changes to completed.
Now when i change the status of a document to completed, the workflow is starting but then throwing an exception. Here is what i am getting, any ideas as to why ?
Event DRAW CHANGED for task TS90000016 not defined as start/end event
Event linkage with errors deactivated
from the swel event trace i am getting the following:
the receiver <task> started correctly,
then i get the following:
Receiver FM SWW_WI_CREATE_VIA_EVENT_IBF
message: Event DRAW CHANGED for task TS90000016 not defined as start/end event
any ideas as to why this is happening and how i can fix it ?
regards to all the experts out there
points are awarded.

Hi,
   If you want the task to be executed without any agent intervention follow this:
In the transaction PFTC_DIS OR PFTC_CHG open your standard task and
          see whether you have checked the ' background processing' option in
          execution category.
It seems the "changed" method in Draw object is synchronous - so you
           dont need any terminating events.
   else
check for the bindings in workflow and make sure you dont make any
         container with import parameter as mandatory.
   Hope this will solve the problem.
Regards,
Manikandan R

RPM_FIN02 - Receiver of IDoc is its own logical system

For one particular portfolio item, I run the RPM program RPM_FIN02.
This results in an IDoc creation.
Next, I checked the status of the IDoc (RPM > Base System Interfaces > SAP Financial and Controlling Integration > Data Distribution From SAP FI-CO to SAP xRPM > Check Inbound Processing).
This shows the status "29 - Receiver of IDoc is its own logical system".
As a result, the Internal Order costs (including the ones posted from cProjects) do not get pulled into RPM Financial Planning.
Please advise.
I do not have the technical understanding of this issue, and would therefore need a little more than the mere technical jargons and terms to be able to resolve this.
Thanks for understanding.

Hi,
Very briefly,
-Assuming your RPM system is independent of your ECC box. But RFC connected.
-RPM_FIN02 is for pulling in financial data onto RPM item from (object linked) Internal Order(IO)/PS Project(PSP).
-RPM_FIN02 do not recognize/goto cProjects for financials.
-cProjects can have its own account assigned IO/PSP
-cProjects Dashboard, (if all is well incl. evaluation) should display costs from assigned IO/PSP
-This cost does not reach RPM item
-Source of cProjects- if it is created within cProjects or from RPM Item, does not matter.
thanks,Mathavan

ReferenceError: Error #1065: Variable is not defined.

Hi people.
Whatever I do (seems like) I end up with the following
message in Flash CS3:
"ReferenceError: Error #1065: Variable is not defined."
I have no clue to what causes it, and therefor I cannot seem
to fix it. I've been trying to look for answers online, but all I
got out of that was to declare my classes as public, which I
already had done.
Even a very simple class that runs a trace command from its'
constructor method won't work. It even gives me this message even
though I don't have any variables or trace commands or anything.
This is really annoying, so please help me out :)
A

Some code sample would help - and remember classes must be
contained within
packages in CS3.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Error #1065: Variable is not defined on ObjectUtil??

One comment to Adobe, it would be nice if the debugger would
output better errors. Maybe it's just my lack of experience, but
trying to track down errors is a daunting task.
I had spent an entire night trying to track down this error
and it has come down to the following code:
private function server_fault(event:FaultEvent):void{
Alert.show(ObjectUtil.toString(event));
The ObjectUtil seems to be causing this error as if i change
it to (event as String) it works fine. But this makes absolutely no
sense since i have other classes that use the exact same code w/o a
hitch. I do have the ObjectUtil imported.
Here is the entire error:
ReferenceError: Error #1065: Variable is not defined.
at global/flash.utils::getDefinitionByName()
at mx.utils::DescribeTypeCache$/describeType()
at mx.utils::ObjectUtil$/getClassInfo()
at mx.controls::DataGrid/::generateCols()
at
mx.controls::DataGrid/mx.controls:DataGrid::collectionChangeHandler()
at mx.controls.listClasses::ListBase/set dataProvider()
at mx.controls::DataGrid/set dataProvider()
at mx.core::Container/createComponentFromDescriptor()
at mx.core::Container/createComponentsFromDescriptors()
at mx.core::Container/mx.core:Container::createChildren()
at mx.core::UIComponent/initialize()
at mx.core::Container/initialize()
at mx.core::UIComponent/
http://www.adobe.com/2006/flex/mx/internal::childAdded()
at mx.core::Container/
http://www.adobe.com/2006/flex/mx/internal::childAdded()
at mx.core::Container/addChildAt()
at mx.core::Container/addChild()
at mx.core::Container/createComponentFromDescriptor()
at mx.core::Container/createComponentsFromDescriptors()
at
mx.containers::ViewStack/createComponentsFromDescriptors()
at mx.core::Container/mx.core:Container::createChildren()
at
mx.containers::TabNavigator/mx.containers:TabNavigator::createChildren()
at mx.core::UIComponent/initialize()
at mx.core::Container/initialize()
at mx.core::UIComponent/
http://www.adobe.com/2006/flex/mx/internal::childAdded()
at mx.core::Container/
http://www.adobe.com/2006/flex/mx/internal::childAdded()
at mx.core::Container/addChildAt()
at mx.core::Container/addChild()
at mx.core::Container/createComponentFromDescriptor()
at mx.core::Container/createComponentsFromDescriptors()
at mx.containers::Panel/createComponentsFromDescriptors()
at mx.core::Container/mx.core:Container::createChildren()
at
mx.containers::Panel/mx.containers:Panel::createChildren()
at mx.core::UIComponent/initialize()
at mx.core::Container/initialize()
at views.movie::MovieDetail/initialize()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::childAdded()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManagerImpl/addPopUp()
at mx.managers::PopUpManager$/addPopUp()
at com.windowedApplication::WindowManager$/add()
at
views.movie::MovieMaster/__movieDataGrid_doubleClick()

I have on the permit debugging option but it says nothing but these errors
ReferenceError: Error #1065: Variable Button is not defined.
ReferenceError: Error #1065: Variable ComponentShim is not defined.
ReferenceError: Error #1065: Variable LoaderProV3AS3 is not defined.

Internal order - Error - Different logical system for order

Hello all,
I try to send IDoc (INTERNAL_ORDER) from system A to system B.
I have done:
- BD64 / WE20 / WE21
But after having customizing I have got following error:
Different logical system for order xxxxxx
Message no. 2075ALE001
Diagnosis
Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
System Response
Internal order xxxxxxx with master system A cannot be distributed in system B.
Procedure
Check customizing for ALE for internal orders.
How to solve this?
My aim is to maintain internal order master data in test system.
Thanks for your help.
David

I have found something.
If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
Then: how to define "master"?

Event trace error: own logical system not defined ?

Similar Messages

Maybe you are looking for