Event Type Linkages: Status "1 errors"

Hi,
we got an error in Event type linkages. One event type is on error and it can't be manually switched back to "No errors" because it's not modifiable.
The error occurs all of the sudden, the workflow could be triggered properly before.
Did anyone got an idea of what I can do?
The BOR type and event seems to be okay. The workflow too. Only the event background job wasn't running, but I restarted him.
Anyway I got this error.
Thank you in advance!

Hi,
with event job, you mean the event queue? this job isn't used that much anymore only in specific cases does it serve a purpose.
What you can do is go to transaction SWEQADM to see which events are in error, also check there who the workflow administrator is. This person/position/whatever should've received a message about the event being stopped.
To fix it you could activate the event-->wf linkage in a transport and import that in production, or in severe cases ask basis / authorization to open the production client for changesand reactivate the linkage. But only do that when you have found out the cause.
There is probably a valid reason why you want to stop the workflow whenever an error occurs in the event.
Kind regards, Rob Dielemans

Similar Messages

Business objects and event type linkages...

Hi Experts,
Im a bit confused with business objects (swo1) and event type linkages(swetypv). Ive learned that business objects are used to trigger events and so how does event type linkages related to business object? Do I need to create business object or should I just search/look for the appropriate object needed?Please kindly explain to me the process or steps in using business object and event type linkages in related with idocs.

Hi,
Business objects neednot have to be created if your are fine with the standard method they have used in or the events yre available for you. If you need to cusomize it then you have to copy it to a subtype. Then do your modifications in it. Event type linkages are used to say which event is active for a Workflow. And if you want to trigger a Workflow based on certain conditions then you have to use either this or Start of Condition. The Error handling of workflow is also handled by Event Type Linkage. So whenvever you create a event linkage for a workflow you get an entry in Event Type Linkage.
Hope this would have thrown some light on you.
Thanks,
Prashanth

Event Type Linkages - No receiver type

We had an issue in our production server where users's were getting the "ambiguous workflow" error. We found the culprit to be an additional entry in the Event Type Linkages (SWE2) that had NO recever type. After we opened up the client, and removed the entry, the error went away.
I know it's possible to enter a new entry in this table despite the erorr requiring the receiver type. However, since this is a production box, access to data is extremely locked down, and there is not a way to directly modify this transaction.
Any ideas how this additional entry could have appeared?

Hi Rick!
Did you guys move any workflows from test/quality system to the production system? Usually, when we create starting events in workflows (using SWDD or PFTC), Event type linkages gets a new record and a transport gets created for the same. So it may have happened that a transport could have moved to Production with those changes.
Hope this helps. Let me know if you have any clarifications.
Regards,
Anwar.

Event type linkages

hi gurus ,
been contemplating with event type linkages(SWETYPV).I'll be using this in connection with IDOC.
Basically my requirement is to have a custom outbound IDOC and will be trigger upon creation/updates of sales order.
My question is how does the event type linkages works?where would I populate the table?what is the role of receiver/check FM in event type linkages.
Please help.

Hi,
Hope you have opened another thread for this?
Event Type Linkages are created through SWE2 and will be populating in SWETYPECOU, SWETYPEENA tables.
Receiver is something which handles when an event occurs. Example when and IDOC ends in an error there should be someone to process this or some should be intimated. The receiver decides on who has to be intimated. Check Function Module are used to trigger based on condition. You define the procedure or do your check to see if the receiver has to be started if yes then set subrc as 0 else 4. So when 4 the receiver will not be triggered.
Thanks,
Prashanth

Event type linkage automatically deactivated - Urgent help

Hi,
I activated the Event type linkage for a PR approval Workflow template (a copy of WS00000038) using t-code SWETYPV, however the Event type linkage got automatically deactivated by the system. I have try to activate again for few times, same thing happen got deactivate automatically, any one have encounter this problem before, please help - Urgent.
thanks.

Hi ,
The mandatory Import parameter might be missing in event container. Event will be deactivated automatically because of these type of errors .
Please check if you are passing all mandatory import parameters.
Pls let me know if it worked.
Regards,
Ganesh.

Event type linkage through SWETYPV

Hi All,
       I have query, in the event type linkage (SWETYPV), if the receiver type is other than the standard task or the workflow template, then how it can be used? Like in one of the standard settings
Object Type: BUS2005 ,Event: DELETED, Receiver Type: SUBSCRIBE, ..
I wanted to know how this Receiver type(SUBSCRIBE) is linked with the event and the sub sequent receiver function module. Please help.
Regards
PSB

the object key will be passed through receiver function module via parameter OBJKEY on IMPORTING.
function sgossub_rec_fb_send_mail.
*"*"Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(EVENT) LIKE SWETYPECOU-EVENT
*"     VALUE(RECTYPE) LIKE SWETYPECOU-RECTYPE
*"     VALUE(OBJTYPE) LIKE SWETYPECOU-OBJTYPE
*"     VALUE(OBJKEY) LIKE SWEINSTCOU-OBJKEY
*"     VALUE(EXCEPTIONS_ALLOWED) LIKE SWEFLAGS-EXC_OK DEFAULT SPACE
If the receiver type is a workflow or task, receiver functional module SWW_WI_CREATE_VIA_EVENT_IBF will use that receiver type as a workflow or task to trigger.
For SUBSCRIBE receiver type, receiver type is just a text. Actually you can put anything there
Chaiphon

Managing event type linkages

Hi, folks! I need your experience for a moment.
Could you tell me how could I know if a particular event type linkage of any business object type (say BUS2032) is activated or not in run-time, thru abap code?
Hope it was clear enough.
Thank you very much, people!

Little note: the option I am talking about and I want to handle, we can find it in the transaction SWETYPV.
Regards, friends.

Event Type linkage and settings of Event Administration Queue

Hi friends,
I have a scenario where there is an event linkage activated for a business object event, when i have checked the details of this type linkage then i found that
1 - ENABLE EVENT QUEUE check box is not clicked.
2 - BehaviorUpon Error Feedbak was set as System presetting.....
And In Event Administration Queue>BasicData>ReceiverErrorFeedback = DeactivationOfLinkage
So here my doubt is will the System deactivate the linkage if any error ll occur even if
ENABLE EVENT QUEUE check box is not clicked ?
Thanks Dev
Edited by: Dev on Nov 28, 2008 12:23 AM

Hi,
Check out these links.
these links will answer all your queries.
[http://help.sap.com/saphelp_nw2004s/helpdata/EN/66/efa874b9b311d2a6010060087a79ea/frameset.htm]
[http://help.sap.com/saphelp_nw2004s/helpdata/EN/c5/e4afe6453d11d189430000e829fbbd/content.htm]
If you still have any queries let me know
Regards,
Raj

How to debug FM used in event type linkage?

Hi experts,
I have actived below linkage by tcode SWETYPV.
BO BUS2032 ALECREATED ,
and I find the Receiver Function Module is PUR_ORDER_CREATE_VIA_SD_EVENT, can we debug this function module?
Thank you in advance.
Richard

Hi Richard,
Can you give us more details about the issue?
Actually we cannot debug the receiver function module when the event is occured. The reason is, its a background process.
As far as i know, its not possible to debug the receiver function module.
To check the event trace, use the transaction SWEL. It will show you whether the action triggered the event or not?
Thanks,
Viji.

Event type Linkages (SWE2)

Hi Friends,
I need to know about the 1) Use of "Linkage Activated" checkbox in SWE2 transaction.
2) Whether the "Receiver Function Module" will be called in the same session after successful completion of "Check Function Module" without any exception or it will be called in the same session. The reason y i ask this question is that, when i try to debug the Event create, it is calling the "Check Function Module", but after successful execution, the debugger is not going to "Receiver Function Module". Please explain in detail on this.

Check http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/5e073c8e56f658e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/d0/5e073c8e56f658e10000000a114084/content.htm
Kanagaraja L

Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

Hi All
I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
Points to be noted:
1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
Appreciate your valuable suggestions.
Thanks
Ragav

Hi Ragav
did you try to debug this? maybe something is missing in config of P&F?
Since you are on 605, the following note would be there in your system....use it to debug:
1422496 - Debugging background workflow tasks in HCM P&F
This will help you find the root cause.
regards,
modak

Javascript error in event handler event type = timeline

Hi,
I have a small EdgeAnimate projekt with version 1.5.0 and the local export works fine... I must include the package at a CMS and I update all paths to absolute paths and all files are loading...
but I the animation dont play - I see at the javascript console the follow output
javascript error in event handler event type = timeline   edge.1.5.0.min.js:143
Springender Punkt: Rettungswagen - Der springende Punkt
I dont found any solution... :-((

Hi Scott,
I have gone through your shared composition created in older verion of Edge.
If you open the older composition html page in browser, there already have some of the error messages in the console as you mentioned above like
      Javascript error in event handler! Event Type = timeline.
And as you said with the latest Edge, when you upgrade the old composition, some new error messages gets added to the existing ones.
As in the latest Edge, the whole of runtime has been shake-up, some of the attributes has been removed and are added in different way.
Example: To access timelines of a symbol:
     Old way:           sym.timelines['Default Timeline']
     New way:          sym.data[sym.name].timeline
You need to make some modifications in index_edgeActions.js file like:
     1. Search & Replace "timelines['Default Timeline']" with "data[sym.name].timeline"
     2. And in the code taken from EdgeCommons.js, replace "getVariable("symbolSelector")" with "_variables["symbolSelector"]".
Hope, these changes will remove the new JS issues you mentioned.
hth,
Vivekuma

Javascript error in event handler! Event Type = element [edge.2.0.0.min.js:162]

I'm doing a little edge project (now in beta version) for my girlfriend (she hates the code), with examples of the animate() method and other functions like setInteval(), but when I run I get the following error in Chrome console:
Javascript error in event handler! Event Type = element [edge.2.0.0.min.js:162]
But this library is global for all projects, how is possible that trigger an error?
Example here:
https://app.box.com/s/m7nof4al6597gfn47jlu
Thanks.

you dont need to import java ease !!
it's already included in edge animate, remove that yepnope completely your problem will gone
Zaxist

Portal Runtime Error Executing Edit Skills/Business Event Type Catalogue

Hi All,
I have recently migrated MSS business content from an EP6 portal to an EP7 solution, however, I am having problems getting the Edit Skills and Business Event Type functions to work.
When I attempt to access the iViews, the following error messages are displayed:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL ':///sap(ZT1taG52cERaUjJHcG9BMXRBNHhTWTNnLS1JUjJ1MypTWW1SKjJXZXE3M2xtSEFRLS0=)/bc/gui/sap/its/zaw_pz31_ewt' is not valid!
Please check the protocol and host entries for system 'SAP_R3_HumanResources'.
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : com.sap.portal.appintegrator.sap.IAC
Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
Content pass of Application Integrator failed.
Component Name: com.sap.portal.appintegrator.sap.IAC,
Context Name (iView): com.sap.portal.appintegrator.sap.IAC,
Top Layer: IAC/ITSDetectionLayer,
Producer ID (FPN): null,
System Alias: SAP_R3_HumanResources,
Can anyone decipher this?
Help is much needed so please feel free to respond
Thanks,
Bim.

Bim, apparently there is a connection error in your ITS service.
- check that zaw_pz31_ewt service is active, and it is located in "/bc/gui/sap/its/"
- test the service in the SAP Client that is mapping against Portal
- check that SAP_R3_HumanResources system is correctly assigned to the new configuration
If error continues, go to Portal side: create a simple iview based on transaction iview template that calls to PZ31. That is for ensure the transaction is working fine.
If it's OK, then create another iview but based on ITS iview template that refers to your service and test (maybe a property of your old iview is causing the problem)
Regards

Shared Event Types Bundle + local event repository = Error in table source

Hi,
I'm using a CEP bundle for propagating shared event types to other deployed Applications. In one application, I am declaring an event type locally in the EPN
i.e.
<wlevs:event-type-repository>
          <wlevs:event-type type-name="someLocalEvent">
               <wlevs:properties>
                    <wlevs:property name="someProp1" type="char" length="256" />
                    <wlevs:property name="someProp2" type="char" length="256" />
               </wlevs:properties>
          </wlevs:event-type>
<wlevs:event-type-repository>And declare it as event type for table:
<wlevs:table id="table1" table-name="TABLE1" event-type="someLocalEvent" data-source="xeDs" />Now I am receiving this error:
<Unknown event type [someLocalEvent] associated to external data source [table1]> But if I put it in the shared event repository, it works as expected. What if the event type is not meant to be shared? Is it impossible to add new event types locally and aggregate it with shared events?

yup it's in the same application. weird though, I started from scratch and it started to work. Must have been an error in other EPN components that screwed the event repository initialization.
Thanks anyway.

Event Type Linkages: Status "1 errors"

Similar Messages

Maybe you are looking for