Events in process chain.

Plz can I get the steps for loading data to the infocube through infopackage using process chain thrice in a day? please give me any links about process chain management..
would appreciate,
jay
Edited by: jay rampal on Nov 12, 2008 1:28 AM

Hi,
  You can schedule your process chain to run 3 times a day.
   For example you want to run process chain at morning 6 A.M., 2 P.M. and night 10.P.M.
  right click on your start process -> maintain varient -> change selections -> date/time -> give todays date -> periodic selections -> here you can give 8 hrs, so that your chain will run 3 times a day. check and save. again save, come to process chain screen -> click on clock symbol to execute the chain. you can see a released job in SM37 which runs based on your selections.

Similar Messages

  • How to create event based process chains

    Hi All,
    I would like to know about event based process chains. In connection to this, could you please answer the following queries,
    1. How to create events
    2. How to link created event to the process chain in the same BI or BW system and as well as from  
        externel BI system.
    3. How link one process chain with other process chain (i.e, After completion of one process chain, it
        should trigger other dependent process chain)
    Thanks and Regards,
    Kotesh.

    1). Doubt regarding first question.
    For example, i would like to create time based event (it should be trigger daily at specified time),
    where we have to maintain scheduling options while creating event.
    When i checked SM62 there i found only two options a). Event name and b). Description.
    Could please send any doucument link if you have.
    Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
    2). For externel BIW system also same procedure we need to follow or any difference.
    Ans : Externally you need to trigger the same event.
    3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
    Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
    I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
    Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
    But Metachain is preferred for such thing.Though it does similar thing.
    Hope this helps.

  • Use of events in process chains

    Hi All,
    Could some one help me in givving me detailed information about the use of events in process chains with some examples .How are they used and what are they performed in background .I am going to start,creating process chains according to the requirements which are based on event scheduling before ..
    Your detailed information is really appreciated..
    Thanks & Regards

    Hi,
    Suppose your process chain needs to be started after certain activity is finished, then you can create an event to be triggered when that activity is done. The process chain will start once it gets that triggered event.
    This is one use in using events in Process Chains.
    Thanks,
    Raj

  • Trigger Event in Process Chain

    Hi ppl,
    i want to push the data into ODS and intocubes whenever the data has been placed in the Delta Queue. how can i do that? i heard that i need a abap program to trigger the event in process chain, is anyone here can help me with the abap program? thanks...

    Hi,
    see OSS Note 135637
    Triggering a Process Chain From R/3 pgm
    Hope this helps.
    GTR

  • HELP Event-driven Process Chain

    HelloCommunity,
    I aim to develop a tool for modelling Business process using EPC (Event-driven Process Chain)
    I have just discovered Sirius, followed some tuturial....But when I started to
    design my own project I got stuck.. My metamodel still complicated and I couldn't deal with some cases and some specific relationship.
    Could you please share with me some links or ressources for project similar to mine?
    Thank you in advance
    Regards,

    Hi Han, Le 28/07/2015 15:56, han sirius a écrit :
    > HelloCommunity,
    >
    > I aim to develop a tool for modelling Business process using EPC
    > (Event-driven Process Chain)
    >
    > I have just discovered Sirius, followed some tuturial....But when I
    > started to
    > design my own project I got stuck.. My metamodel still complicated and I
    > couldn't deal with some cases and some specific relationship.
    >
    > Could you please share with me some links or ressources for project
    > similar to mine?
    Did you try the tutorial [1] ?
    You might discover concrete examples of modeling tools created with
    Sirius for various use-cases in the gallery [2] and lab [3].
    You will also find the documentation in [4].
    >
    > Thank you in advance
    >
    > Regards,
    >
    >
    Regards
    Maxime - Obeo
    Need professional services for Sirius?
    http://www.obeodesigner.com/sirius
    [1] https://www.eclipse.org/sirius/getstarted.html
    [2] https://www.eclipse.org/sirius/gallery.html
    [3] https://www.eclipse.org/sirius/lab.html
    [4] https://www.eclipse.org/sirius/doc/

  • Query on using EVENTS in process chains.

    Hi,
    Process Chain A on completion posts a Trigger using FM - BP_EVENT_RAISE.
    Is there an ABAP program to check for the specific event completion from process chain A. Basically , we need an FM or program that reads the event status ( whether event raised or not ) and accordingly triggers another process chain.
    We need this fuctionality in process chain B coz we would be using an AND condition that checks for the event trigger from process chain A as well as Step 1 in chain B.
    Thanks,

    Welcome to forum.
    Hari,
    1) Let us say ,Process Chain A, will triggger an event EVENT_A for an example.
    instead of one evnt use 2 events, EVENT_A on success and EVENT_B on failure.
    2) Link Program A to EVENT_A and Program B o EVENT_B
    I hope it helps..
    Regards,
    Hari
    if this helps pls.. assign some points..

  • Using events in Process chain

    Hi All,
    I have below scenario:
    Now we are using event collecter and subsequent event in event collector .
    I am going to convert my loads into Process chain from Infopackage groups. My problem is I can use event1 directly in Start of process chain but how to trigger event2 using this chain. I need to trigger event2 once my PC is completed successfully. The even2 will trigger a background job to execute one ABAP program. This ABAP program triggers event1 again if it meets certain requirement.
    Hope you understood my problem.
    Thanks in advance
    Vani

    Hi,
    If I have understood properly,
    Event1(Start) --> Sequence of PC steps --> ABAP Program Process Type (To trigger Event2)  --> Event2 triggers again Event1( If meets requirement)
    What is your End of the Process Chain if it triggers again Event1?
    Why do you want to trigger events in a cyclic way?
    Regards,
    Suman

  • How to trigger Process event in Process Chain

    We have a Process chain in which the Event is seen in Yellow ,but it is finished. Down the below Event is not trigerring. How to do that. Please suggest.
    Thanks

    Hi Annapurna,
    Goto SE38 run the function module RSPC_PROCESS_FINISH by providing the entries in LOGID, TYPE, VARIENT, INSTANCE and STATE.
    These entries can be get in the table RSPCPROCESSLOG. To execute the table entries go to SE16 and give table name RSPCPROCESSLOG and press enter. Then in the processchain where the chain got stuck, double click on the varient and goto chain tab and you will get VARIENT and INSTANCE.
    Copy and paste these in the table RSPCPROCESSLOG selection screen and execute. Here you will get  LOGID, TYPE, VARIENT, INSTANCE.
    Enter all these field in function module RSPC_PROCESS_FINISH by providing the STATE as G and execute.
    Your stuck process chain will move further.
    Thanks and regards
    Koushik
    Steps same as described by AP.
    Hope it helps.
    Edited by: koushik gowda on Jul 16, 2009 11:40 AM

  • How to capture event in process chain....Please help...

    Hi All,
    Please tell me how can I capture any event triggred by ABAP program in process chain...The ABAP program is there in the process chain...ABAP prog is triggering one event based on some condition..Please tell me how can I capture that event in the process chain...
    Thanks in Advance...

    Also check this link...
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/help/sdn_nw04/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
    Hope this helps...
    Thanks,
    Raj

  • Event Triggered process chain

    Hi Experts,
    We have a meta chain which contains two local chain in sequance and consuming 10 hours to complete
    Process Chain 1
    Process Chain 2
    We have used the events to trigger process chain 2 only when it meet certain condition and modified the meta chain as
    Process Chain 1
    Abap Prg to trigger Process chain 2
    But now the meta chain just consume 4 hours to complete even though process chain 2 is on progres.
    This is giving wrong update to the users as the load is completed.
    Is it possible to retain the status of the meta chain as in progress untill the process chain 2 triggered by event gets complets.
    Regards
    Suresh Kumar

    Hi Suresh,
    when you are using event as a process in the metachain, it checks if the event ran succesfullly or not.
    once the event is succesfull(event -  triggering of the process chain but not completion), the step turns green.
    so follow below procedure.
    1)in the abap program, instead of triggering the process chain,write a program which raises an exceptio if the condition you required is satisfied so that the step becomes red.
    use the proicess chain as next step in the process chain and conect this program to processchain step with th condition failure.
    Hope this helps,
    Srinath.

  • AL11 event to process chain

    HI masters
    lets suppose u get a file in al11 and on arrival of this a process chain has to be started using an event.
    how do u connect the file which keeps coming daily and the chain chain has to run run daily on arrival of the file automatically
    thanks
    k.mohan

    This would depend on what is putting the file on the file server.  If the program is external to BW, can it be changed to execute the <b>sapevt</b> command on the server?  This command is external to BW (and R/3) and is located on the application server.  Its sole purpose is to trigger an event in BW (or R/3).  It has parameters, but the format depends on what operating system your BW system runs on.
    Otherwise, you may want to create an ABAP program that will look for the file on the file server and if and when it finds it, it will trigger the event that executes your Process Chain.
    Does this help?

  • Asynchronous event in Process chain

    Hi Experts ,
    What is the use of asynchronous scheduling of an event in the process chain (using ABAP program) . I have used synchronous and local selections generally for my process chains earlier , but was wondering where could we exactly use asynchronous mode .
    I have referred to this link :
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c5/eed63b54e56276e10000000a11402f/content.htm
    and have understood what asynchronous scheduling is (considering there are no advantages as such ) , so in which scenarios it is being used ?
    Please acquaint me about this .
    Thanks in advance !

    Repost

  • Asynchronous event in Process chains

    Hi Experts ,
    What is the use of asynchronous scheduling of an event in the process chain (using ABAP program) . I have used synchronous and local selections generally for my process chains earlier , but was wondering where could we exactly use asynchronous mode .
    I have referred to this link :
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c5/eed63b54e56276e10000000a11402f/content.htm
    and have understood what asynchronous scheduling is (considering there are no advantages as such ) , so in which scenarios it is being used ?
    Please acquaint me about this .
    Thanks in advance !

    Repost

  • Event based Process chain issue

    Hi,
    I have a PC which is event triggered through a program. when i'm trying to run it i'm getting following msg
    "Process chain is not responding to the event trigger."
    Can someone help me in fixing it and triggering thr PC ?

    Hi,
    Refer the nice article from SDN and verify if you have followed the process to write the event based PC.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0a41bc6-a7f6-2b10-b3bf-804e1c45ae6c
    Regards
    Dinesh
    Edited by: Jason Lax on May 16, 2011 8:27 PM - Added preferred URL

  • Creating Event driven process chain

    Hi all,
    In my scenario there are two chains in which
    1. First chain is normal chain, which we are using to
    load business data.
    2. Second chain will contain start variant and one ABAP
    program that will call first chain and this second
    chain is event driven.
    So can anybody send me relevant documents or
    information regarding how to create event? How to
    schedule process chain using event? and also how to call
    process chain using ABAP program?
    Thanks & Regards
    Ajinkya Deodhar

    Hi,
    Look into the following links:
    http://help.sap.com/saphelp_sem40bw/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_sem40bw/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
    Event collector:
    http://help.sap.com/saphelp_sem40bw/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
    Creation of Event:
    http://help.sap.com/saphelp_sem40bw/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_sem40bw/helpdata/EN/86/6ff03b166c8d66e10000000a11402f/frameset.htm
    Hope it hepls you

  • Use event trigger process chain

    Hi friends,
    I am working on a process chain tuning task.
    One request is to change a schedule method  of an interrupt from date/time to event.
    I know how to generate and utilize event.
    My worrying is:
    Is an event has duration?
    E.g Today's process chain scheduled at 01am,,processing, the interrupt was triggered  by event at 04am, but at 10am, the event was trigger again for some unknown reason.
    Then,the process chain with the interrupt will be scheduled  at 04am tomorrow, but actually, there may be no event for tomorrow as requirement(due to some reasons,we do not like PC run everyday).
    Anyone know how to solve this problem?

    Martin
    You partially answered my questions.
    My chain contains both date/time schedule and event trigger.
    As is:
    Start-date/time schedule daily at 1:00am
    step1,step2,,etc
    interrupt-now, it is date/time schedule,at 4:00am
    other steps.
    To be:
    Start-date/time schedule daily at 1:00am
    step1,step2,,etc
    interrupt-  event trigger schedule
    other steps.
    I know how to trigger event by ABAP program.
    My concern is:
    Today afternoon, someone run this ABAP 10 times to generate 10 events,what will happen tomorrow?
    Actually,according to business requirement,tomorrow's process chain(interrupt below part) shall not be ran.

Maybe you are looking for