Events in SubVi not working as expected
Hi, I am reposting this question as my previous one didn't resulted in any satisfactory conclusion.
I have attached my Vi's which are not working as expected. If I remove ONE subVi and its associated 3 controls and two indicators, the other one works just fine, but when I add two SUB Vis, it goes messy. I am trying to learn this way, I am sure it can be done many other ways, but please help me finding out the problem doing it this way as in my final MainVi, I would like to use 8 such sub Vis. Thanks.
Solved!
Go to Solution.
Attachments:
Main.vi 11 KB
SubVi.vi 12 KB
SubVi_2.vi 15 KB
Your main problem is DATA FLOW. A loop cannot iterate until EVERYTHING in it has completed. So, as you have it, you have to have both event structures execture before you can go back to look for the next event. So if you insist on having these subVIs, they need to be in seperate loops.
BTW, you can get away with a single subVI. Go into the VI properties and make it reentrant (preallocated clone). Then each call of your subVI will have its own memory space. A lot easier to maintain that way.
And I know you said you didn't want alternatives, but here's how you can do it all with a single event structure in your main loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Main_MODTR.vi 10 KB
Similar Messages
-
Event manager script not working as expected
On a Cisco 4900M running Version 12.2(53)SG1, trying to capture certain information requested by Cisco TAC to troubleshoot periodic high cpu usage on the device causing it to momentarily not respond to HSRP packets from the HSRP partner.
This is the script in place today:
event manager applet capture_cpu_spike
event snmp oid 1.3.6.1.4.1.9.2.1.56 get-type next entry-op ge entry-val "80" exit-time 10 poll-interval 1
action 1.0 syslog msg "CPU Utilization is high"
action 2.0 cli command "en"
action 3.0 cli command "show proc cpu sort | redirect bootflash:cpuinfo1.txt"
action 3.1 cli command "show int summ | redirect bootflash:cpuinfo2.txt"
action 3.2 cli command "show proc cpu sort | redirect bootflash:cpuinfo3.txt"
action 3.3 cli command "show int summ | redirect bootflash:cpuinfo4.txt"
action 3.4 cli command "show platform cpu packet statistics | redirect bootflash:cpuinfo5.txt"
action 3.5 cli command "show platform health | redirect bootflash:cpuinfo6.txt"
action 4.0 cli command "end"
Problem is, when the cpu does spike, only action 3.1 is executed.
How do I modify this script to run all the commands listed?
TIA
domLet me first explain why your script is not working for you.
Basically, the problem you encounter is a result of a common misconception about copyin(). It is intended to be used to copy content of userspace memory into a scratch buffer so that it can be accessed directly from within kernel space (where the DTrace core executes). That said, it is often interpreted as somehow being equivalent to malloc() whereas in reality it actually works like alloca() instead. So, what you are seeing is basically the artefact of the scratch buffer being overwritten with other data. And unfortunately, that is perfectly legal.
The content of the scratch buffer pointed to by self->addr in your script is only valid for as long as the specific probe enabling is executing (it is clause-local). So, your clauses to print out the actual bytes in the buffer are looking at a buffer that is for all intends and purposes no longer reserved, and therefore you are looking at it after other data was written to the scratch space.
So... in order for this to work, you should do things a bit different. Rather than trying to get a copy of the buffer in one clause, and then read from it in following clauses, you can simply collect the buffer address in the entry read:entry clause, get the number of bytes read in the first read:return clause, and then for every clause in which you print 4 bytes do the following (example for bytes 4-7):
syscall::read:return
/execname == "foobar" && self->nbytes > 4/
this->addr = (char *)copyin((uintptr_t)self->bufferaddr + 4, 4);
printf(" 4- 7: %02x %02x %02x %02x\n", this->addr[0], this->addr[1], this->addr[2], this->addr[3]);
So basically, for every clause that print 4 bytes you copyin those bytes, and then print them out. -
My problem is pretty easy to reproduce.
I created a project from scratch with a view model.
As you can see in the setter of "Age" property I have a simple logic.
public class MainViewModel : INotifyPropertyChanged
public event PropertyChangedEventHandler PropertyChanged;
private int age;
public int Age
get
return age;
set
/*Age has to be over 18* - a simple condition in the setter*/
age = value;
if(age <= 18)
age = 18;
OnPropertyChanged("Age");
public MainViewModel(int age)
this.Age = age;
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
In the MainPage.xaml
<Grid x:Name="LayoutRoot" Background="White">
<TextBox
Text="{Binding Path=Age, Mode=TwoWay}"
HorizontalAlignment="Left"
Width="100"
Height="25"/>
<TextBlock
Text="{Binding Path=Age, Mode=OneWay}"
HorizontalAlignment="Right"
Width="100"
Height="25"/>
</Grid>
And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
public partial class MainPage : UserControl
private MainViewModel mvm;
public MainPage()
InitializeComponent();
mvm = new MainViewModel(20);
this.DataContext = mvm;
I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
Case 1: Debugger is attached =>
TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
Case 2: Debugger is NOT attached =>
TextBox value will be "18" and TextBlock value will be "18" - CORRECT
It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
Has something changed in SL5 and logic in setters is not allowed anymore?
Configuration:
VisualStudio 2010 SP1
SL 5 Tools 5.1.30214.0
SL5 sdk 5.0.61118.0
IE 10
Thanks!Inputting the value and changing it straight away is relatively rare.
Very few people are now using Silverlight because it's kind of deprecated...
This is why nobody has reported this.
I certainly never noticed this problem and I have a number of live Silverlight systems out there.
Some of which are huge.
If you want a "fix":
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
//PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
Storyboard sb = new Storyboard();
sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
sb.Completed += delegate
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
sb.Begin();
The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML -
Subtraction of two key figures normalized to result not working as expected
Hello SAP Community!
I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
In order to explain the problem I am facing please analyze below text:
1) Let's assume I have below data:
LOAD MONTH PLANT MATERIAL HORIZON MONTH FORECAST UNITS
200805 PLANT-A MAT-1 200805 510,235.00
200805 PLANT-B MAT-1 200805 74,240.00
200805 PLANT-A MAT-1 200806 438,721.00
200805 PLANT-B MAT-1 200806 74,240.00
200805 PLANT-A MAT-1 200807 356,981.00
200805 PLANT-B MAT-1 200807 74,240.00
200806 PLANT-A MAT-1 200805 0.00
200806 PLANT-B MAT-1 200805 0.00
200806 PLANT-A MAT-1 200806 510,235.00
200806 PLANT-B MAT-1 200806 74,240.00
200806 PLANT-A MAT-1 200807 438,721.00
200806 PLANT-B MAT-1 200807 74,240.00
2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Comparison Units (June 2008) 510,235.00 438,721.00
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Comparison Units (June 2008) 74,240.00 74,240.00
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
we normalize forecats to results an we get the below report:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Base Units % (May 2008) 85.527% 85.527%
Comparison Units (June 2008) 510,235.00 438,721.00
Comparison Units %(Jun 2008) 87.298% 82.784%
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Base Units % (May 2008) 14.473% 15.702%
Comparison Units (June 2008) 74,240.00 74,240.00
Comparison Units %(Jun 2008) 12.702% 17.216%
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
units, for both number of units and %. The report now look as below:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Base Units % (May 2008) 85.527% 85.527%
Comparison Units (June 2008) 510,235.00 438,721.00
Comparison Units %(Jun 2008) 87.298% 82.784%
Delta base vs. comp. units % 1.77% 2.74%
Delta base vs. comp. units 71,514.00 81,740.00
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Base Units % (May 2008) 14.473% 15.702%
Comparison Units (June 2008) 74,240.00 74,240.00
Comparison Units %(Jun 2008) 12.702% 17.216%
Delta base vs. comp. units % -1.77% -2.74%
Delta base vs. comp. units 0.00 0.00
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
5) PROBLEM:
In my report, the "Delta base vs. comp. units %" is not working as expected and
calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
So my report looks as follows:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Base Units % (May 2008) 85.527% 85.527%
Comparison Units (June 2008) 510,235.00 438,721.00
Comparison Units %(Jun 2008) 87.298% 82.784%
Delta base vs. comp. units % 71,514.00 81,740.00 <<<WRONG!!
Delta base vs. comp. units 71,514.00 81,740.00
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Base Units % (May 2008) 14.473% 15.702%
Comparison Units (June 2008) 74,240.00 74,240.00
Comparison Units %(Jun 2008) 12.702% 17.216%
Delta base vs. comp. units % 0.00 0.00
Delta base vs. comp. units 0.00 0.00
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
The formulas are:
a) Delta base vs. comp. units %
Delta base vs. comp. units % = Comparison Units % - Base Units %
b) Delta base vs. comp. units
Delta base vs. comp. units = Comparison Units - Base Units
The KFs
- Comparison Units %
- Base Units %
Are RESTRICTED key figures (restricted to Base and comparison month variables) which
are setup as:
1) Calculate Result As: Summation of Rounded Values
2) Calculate Single Value as: Normalization of result
3) Calculate Along the Rows
The KFs
- Delta base vs. comp. units %
- Delta base vs. comp. units
are FORMULAS setup to:
1) Calculate Result As: Nothing defined
2) Calculate Single Value as: Nothing defined
3) Calculate Along the Rows: user default direction (grayed out)
Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
Any help is highly appreciated.
Thank you.
MarioHi,
The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
I hope this will solve your issue.
Regards,
S P. -
AFS ARUN Size Substitution Not Working As Expected
Hi All,
I need help with this. If any one of you have worked with AFS ARUN size substitution, kindly provide me with some details on how can I set it up. I am specially interested in setting up size substitution with two-dimensional grids.
I have setup some examples but it does not work as expected.
Here is a small example:
Say I have a size 28/30, 28/32 .........29/30....
What I want to achieve is that during ARUN if there is a shortage of stock in 28/30 then the remaining requirement qty should be confirmed from size 28/32.
with my setup after 28/30 it goes into looking for stock in 29/30, which is what I do not want.
Any inputs will be really appreciated.
Thanks!!srdfrn wrote:
Hi YOS,
I tried importing a PCX image into CVI 2010 and then sizing the image to the control and didn't see the behavior you have been describing. Would you mind posting an example (alongside an image file) that demonstrates this?
Also, one thing I noticed is that PCX images appear to be quite dated. Could upgrading them to a JPEG or PNG format be an option for you?
Thanks,
Stephanie R.
National Instruments
Stephanie, thanks for the reply.
I am very sorry to state that I made a mistake.
VAL_SIZE_TO_IMAGE indeed works.
What fails to work is VAL_SIZE_TO_PICTURE. (Second option in Fit Mode attribute in control editing panel)
I tried with JPEG and it's the same.
I am attaching an example.(Load_Image.c & ONEP_3Trow_POS1.JPG)
A panel with two picture rings.
- SW_1 remains at the intended size and the loaded picture is not clear.
- SW_2 will fit to picture size and looks OK.
Appreciate your support,
YOSsi Seter
Attachments:
Load_Image.c 2 KB
ONEP_3Trow_POS1.JPG 4 KB -
Notification "Launch the app and go to the library" not working as expected
Hello,
we are sending notification "Launch the app and go to the library" - but it's not working as expected, it's still just launching app with last open folio.
Whats wrong there? Do we need v30 app? We have V29, but this is not mentioned in documentation.
Thanks
MartinAh.
Ok, now it's clear.
Anyway i would appreciate possibility to force viewer to switch to library view after new issue is detected, even without notification. Quite often requested feature - "there is new cover in Newsstand, but customer don't know how to download new publication easily".
Martin -
DB Adapter polling as singleton process is not working as expected
Am using poller DB adapater to control the transaction per seconds to the downstream system and i want this poller process as singleton (One instance should be in running state at a time).
As suggested in oracle documents , below is the parameters configured in composite.xml file.
<service name="polling_Mange_Alert_Events"
ui:wsdlLocation="polling_Mange_Alert_Events.wsdl">
<interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt)"/>
<binding.jca config="polling_Mange_Alert_Events_db.jca">
<property name="singleton">true</property>
</binding.jca>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
override="may">1</property>
<property name="jca.retry.backoff" type="xs:int" many="false"
override="may">2</property>
<property name="jca.retry.maxInterval" type="xs:string" many="false"
override="may">120</property>
</service>
Below is the JCA file parameters configured :
<adapter-config name="polling_Mange_Alert_Events" adapter="Database Adapter" wsdlLocation="polling_Mange_Alert_Events.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/vff-int-fus" UIConnectionName="PT_APPINFRA" adapterRef=""/>
<endpoint-activation portType="polling_Mange_Alert_Events_ptt" operation="receive">
<activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
<property name="DescriptorName" value="polling_Mange_Alert_Events.ManageAlertEvents"/>
<property name="QueryName" value="polling_Mange_Alert_EventsSelect"/>
<property name="MappingsMetaDataURL" value="polling_Mange_Alert_Events-or-mappings.xml"/>
<property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
<property name="MarkReadColumn" value="TRANSACTION_STATUS"/>
<property name="MarkReadValue" value="Processing"/>
<property name="PollingInterval" value="10"/>
<property name="MaxRaiseSize" value="5"/>
<property name="MaxTransactionSize" value="5"/>
<property name="NumberOfThreads" value="1"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="MarkUnreadValue" value="Pending"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
This poller process is running on clustered environment (2 soa nodes) and it is not working as expected as singleton process.
Please advise to solve this issue ?Hi,
1.Set Singleton property outside <binding.jca> like this:
<binding.jca config="polling_Mange_Alert_Events_db.jca"/>
<property name="singleton">true</property>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
2.Also you can try setting these values in jca file:
<property name="RowsPerPollingInterval" value="100"/>
<property name="MaxTransactionSize" value="100"/>
3. try to increase the polling interval time.
Regards,
Anshul -
TCP Window sizing not working as expected for Windows server 2008 R2 SP1
Hi ,
TCP window size is not working as expected. It is varying . Aplied the hotfix suggested by Microsoft and set the multipliccation factor as 1.The window size is not getting auto tuned based on the client machine. The data transfer rate is getting degraded.
Please help.
Thanks,
Pro1962Hi,
I think window auto-tuning is enabled.
You can disable it by running the following commend.
netsh interface tcp set global autotuninglevel=disabled
Hope this helps. -
Container-Managed Transaction Type Attributes not working as expected
I am having a problem with the container-managed transactions not working as expected. I have 2 methods that work as follows:
MethodA{
for(a lot)
call MethodB;
@Transaction Type = RequiresNew
MethodB{
EntityManager Persist to database
I want the code in MethodB to be committed to the database when methodB returns. The problem is that I am running out of memory and MethodA is failing. When methodA fails after numerous calls to MethodB nothing is persisted to the database.
It is my understanding that when using requires new transactions that a new transaction is started for each call to the method and ends when the method returns while the calling method transaction is suspended.
How am I misunderstanding the requiresNew transaction attribute. What can I do to make a batch insert into my database that will not run out of memory (commit when a methodB returns)?
Thanks in advance.The problem is that EJB invocation semantics for security, container-managed transactions, etc.
only apply when an invocation is made through an EJB reference. In your case, you are directly
invoking the implementation method from within the bean. The EJB container has no idea that's
happening. It's no different than invoking a utility method.
In order to get the behavior you'd like, you need to retrieve a reference to your own bean and invoke
through that. You can use SessionContext.getBusinessObject() to get the EJB reference for the
business interface through which the method in question is exposed.
--ken -
Namespaces not working as expected
Hi, I've got problems with namespaces not working as expected. When I isolate a process into a new network and mount namespace, a newly mounted file system will be visible to all processes.
Steps to reproduce:
$ sudo unshare -mn bash
bash# mount -t sysfs sysfs /sys
bash# exit
$ cat /proc/mounts
Result:
/proc/mounts will contain a new line for sysfs. This means the /sys/fs/cgroups directory will appear to be empty as the new sysfs is mounted over the old However you can undo it by
sudo umount /sys
Expected result:
The /sys directory will only be new inside the bash process started using unshare and not anymore once you exit bash.
Did I understand something wrong? Or might this be a bug in the kernel?
Note that when using
unshare -m bash
without isolating the network namespace it will refuse to mount sysfs as it is already mounted or busy. Strange.Hello, because sysfs is shared, see unshare(1) for more details.
-
UpsertDocumentAsync not working as expected
I'm using UpsertDocumentAsync to either insert or update a document, but it doesn't seem to work as expected. When I use it either inserts / creates or
replaces the document. I doubt I'm calling it wrong?
await client.UpsertDocumentAsync(documentsLink, this.document);
Working as expected (but with incorrect name) or not working as expected?
Regards,
Joakim
Joakim Rosendahl Consultant at OnTrax AB, Sweden.Found this one (doesn't contain the work PATCH though)
http://feedback.azure.com/forums/263030-documentdb/suggestions/7075256-provide-for-upsert
Voted for that one, but it doesn't seem like the developer community is interested in upsert/patch functionality =/.
Joakim Rosendahl Consultant at OnTrax AB, Sweden. -
Exchange Online Protection (standalone) permissions are not working as expected
Exchange Online Protection (standalone) permissions are not working as expected.
we provided access to Hygiene Management to some members and they not able to access EOP site.
This is standalone EOP.
ksrugiHi,
what roles did you have assigned to them and what error message do you get?
Greetings
Christian
Christian Groebner MVP Forefront -
Keyboard not working as expected
I woke up this morning and suddenly found a few problems with my keyboard:
The caps lock light is reversed so that the caps is off when the light is on and vice versa
The placement of some of the symbols are moved around. The @ is to the right of the P button and Shift-2 produces a ". Shift-9 is ), shift-8 is ( and many other switched like this.
Resetting PRAM or the computer doesnt fix thisHello there, morris152.
The following Knowlede Base article provides some great information for troubleshooting your issue with the keyboard:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Particularly:
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
PEI event not working as expected after Hofix 1 for 5.0.2
Dear all,
we are running in some problems after installing the Hotfix to our Portalversion 5.0.2.
After installing the Hotfix 1 for Plumtree Portal 5.02 we have a problem with a PEI event that worked without any problem before. The redirect does not work anymore, instead it redirects to the standard login view (the same you would see if you try to login with the wrong password, username or authentication source). Are there any hints on a solution for that problem?
Many thanks in advance,
This is an excerpt of the code:
import com.plumtree.uiinfrastructure.activityspace.Redirect;
public class LoginActions implements ILoginActions {
public Redirect OnBeforeLogin(ApplicationData appData, String userName) {
if (someCondition()) {
Redirect r = new Redirect();
r.SetLinkToExternalURL("http://www.foo.bar");
r.SetIsHTTPRedirect(true);
return r;
} else {
return null;
// rest of code omitted for claritySome of the Redirects returned by the methods in LoginActions are broken. These problems will be addressed in the next Service Pack. In the meantime, here is a summary of what works, what doesn't and how you can code around those bugs: OnAfterLogin: Redirecting the Guest user to an external URL doesn't work. Instead of using the Redirect object, set the URL in the header. Here is how you can do this:_appData.SetHeader("Location", "http://www.plumtree.com");_appData.SetStatus(302); All other redirects work. OnBeforeLogin: Redirecting from OnBeforeLogin doesn't work at all. Once again, instead of using the Redirect object, set the URL in the header:_appData.SetHeader("Location", "http://www.plumtree.com");_appData.SetStatus(302); Another option is to redirect from OnAfterLogin.
-
On my virtual machine with Windows 7 32-bit and internet Explorer 11 I was testing a webpage with an old Java applet which is hosted on one of our servers. I opened the page and got the Java message 'Application blocked by security settings'. I added the
website address to the Java Exception Site list because the applet doesn't meet the
new security requirements for RIAs in Java 7u51 and later. When I reloaded the page I could run the applet after I accepted Java security warning and started the applet. During the testing of the page I suddenly noticed the EMET 5.0 message "EMET detected
ASR mitigation in iexplorer.exe Component: Java(TM) Platform SE binary".
This reminded me that I installed EMET 5.0 on this machine. I thought that I should have seen this EMET reporting message sooner because the website did not belong to the trusted site zone. Also I realized that EMET should have prevented the loading
of Java altogether the first time and therefore the Java message 'Application blocked by security settings' and the Java security warning also should have been blocked too!
I added "*.server1.company.com" to the trusted site zone and did some more testing....
With the site in the trusted site zone I tested with different ASR settings but the results were not what I expected. The ASR setting 'Internet Zone Exceptions:' is set to "Local Intranet; Trusted Sites" so the ASR mitigation should not have been
triggered. When I checked all the other zones exceptions the ASR mitigation is still triggered. The ASR setting 'Internet Zone Exceptions:' doesn't seem to work!
When I unchecked all the zones (no exceptions) in the ASR setting 'Internet Zone Exceptions:' Internet Explorer shows a message that the page you are viewing requires Java and EMET shows the ASR mitigation message. After clicking OK I get a UAC prompt for
the Internet Explorer add-on Installer (to install Java I guess).
When I disabled ASR for iexplore.exe the webpage and the Java applet started normally.
When I was writing this post I tried to reproduce the behavior that Java is started and the ASR mitigation is detected later on. I removed the site from the trusted site zone and cleared the cache for internet explorer and Java. After I restarted the computer
and logged on I could not reproduce the behavior!
Then I noticed that the webpage always did belong to the Intranet zone (based on "*.comany.com") and the ASR mitigation for iexplore.exe should not have been triggered! I realized that EMET first did work as expected and the Java applet was allowed
to start (after I added it to the Java Exception Site List) and that suddenly EMET detected the ASR mitigation for iexplore.exe for a website in the local intranet zone (and later also in the trusted site zone)....
The events in the application event log also are different and don't always show the web address and url zone:
EMET detected ASR mitigation in iexplore.exe
ASR check failed:
Application : C:\Program Files\Internet Explorer\iexplore.exe
User Name : COMP\USERNAME
Session ID : 2
PID : 0x109C (4252)
TID : 0x16BC (5820)
Module : jp2iexp.dll
EMET detected ASR mitigation in iexplore.exe
ASR check failed:
Application : C:\Program Files\Internet Explorer\iexplore.exe
User Name : COMP\USERNAME
Session ID : 2
PID : 0x1710 (5904)
TID : 0xA20 (2592)
Module : jp2iexp.dll
Web address : http://java.server1.company.com/java/module/
Url zone : Trusted
Has anyone experienced this strange behavior too?
W. SpuYou may not know, but there are no AppleStores in Russia. And there are no Apple genuine service, only representatives. This is the first you need to know. The second thing is here law says that if service can't fix item it should be returned to store.
I will try to call AppleCare tomorrow, but i think there still will be no result.
Maybe you are looking for
-
Is it possible to access my calendar while on a phone call on my Verizon iPhone?
When I'm on a phone call on my Verizon iPhone 4, it doesn't appear that I can leave the phone screen to view, for example, my calendar. Is there a way to access my calendar while on a phone call? Thanks in advance for your time and responses.
-
How do I transfer data from my passport to my macbook?
How do I transfer data from my passport to my macbook? It recognizes the passport as I can see all of the information, but I can't get away from the "checking for sources" spinning wheel.
-
Printing financial statements several pages long that don't show fully!
I get investment monthly statements that may be 5 to 6 pages long. The iPad (4th generation) only shows first page and half of 2nd page. How do I get the rest so I can print to my wifi printer?
-
Screen is cracked and i cant make out a thing. I know that since what happened to it is not really covered by warranty but i want to know what I should do about getting it repaired/replaced? Thanks in advance. Dell Windows XP
-
How to make system consider Alternative unit of measure while creating BOM?
Dear Experts, When creating a BOM, how do I make the system consider the alternative unit of measure if at the point of creating the BOM, I decide to use the component material alternative unit of measure? The scenario is as follows: Header Materi