Ever since I installed the update of Leopard 10.5.2 I cannot open itunes!!

Ever since I installed the update of Leopard 10.5.2 I cannot open itunes!!
I get a message that says:"The itunes library is locked, on a locked disk, or you do not have write permission for this file."
I did do a permissions fix with the disk utility and same problem!
Any suggestions???
I think I might be demanding my money back for this Leopard!

Below where you see the Read and Write permissions on that folder there is a little triangle next to the word Details. Scroll down a bit and you'll see a tab to click to Apply to Enclosed Items. If it says you have read and write on the main folder, click the Apply button to make sure that all folders inside the main folder also have both Read and Write permission.

Similar Messages

Ever since I installed the Safari 5.1.7 update my trackpad malfunctions.

Ever since I installed the Safari 5.1.7 update, my trackpad does not functing well. I know its not a faulty trackpad because it also malfunctions when I install a different mouse. The malfunction happens when I launch the Safari application. How do I fix this? Is there a way to undo a software update?

Try rebooting into Safe Mode, this will clear some caches. I'm thinking one or more may have become corrupt. Have you done any basic troubleshooting such as removing he MTP's batteries and restarting it or restarting the computer or anything else?
Also PLEASE use the Profile Update , otherwise we cannot tell anything about your system which makes it extremely difficult to troubleshoot.

HT5594 Ever since I did the update, my location service is shut off, and I can't get it back on...help?

Ever since I did the update, my location service is shut off, and I can't get it back on...help?

Hi there,
Did you try the basic steps?
- Restart Device.
- Reset Device.
- Reset All Settings.
Hope it helps,

TS1702 Since I installed the update for Mindjolt games, it will not let me in. Does anyone else have this problem?

Since I installed the update for Mindjolt games, it will not let me in. Does anyone else have this problem?

Try resetting the iPad. Simultaneously hold down the Home and the On buttons until the iPad shuts off. Ignore the off slider if it should appear. This should take only about ten seconds or so. Once shut down is compete, turn the iPad back on.

I have iPad 4th Generation with iOS 6.1.3 Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email. When I tap of the attachment, the iBooks icon no longer show itself. Can someone please help?

I have iPad 4th Generation with iOS 6.1.3 Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email. When I tap of the attachment, the iBooks icon no longer show itself. Can someone please help?

Thanks for all (Ocean20 & Courcoul) who replied.
Reset the device did not help me but it does triggers me to attempt to resend the PDF file attachment on email--and it works the 2nd time. My problem is now solved.
The Adobe Reader is very helpful--it allows me to scroll through the document easily, unlike iBooks, where I cannot scroll straight up or down.

I tried to update to the most recent itunes, but the update failed and now when I try to open itunes a dialog box pops up and tells me that it can.t open because MSVCR80.dll is missing. I need help!

I tried to update to the most recent version of itunes but the update failed. Now when I try to open itunes I get a dialog box telling me it can,t open because MSVCR80.dll is missing. I tried uninstalling and reinstalling itunes but I grt the same message. What can I do to fix this?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Ever since I installed the 3.6.6 version, I've experienced frequent "hanging" problem which never or hardly occured before. And it has become quite annoying. Should I restore to the older version?

Ever since I installed Firefox 3.6.6, "hanging", which hardly happened before, has become so frequent that it is very annoying. My use habit and pattern has not changed. Should I just re-install the earlier version?
== This happened ==
A few times a week
== It's hard to tell what triggers it. I could be writing a e-mail, or moving to another web site...

Without knowing what's causing it, and therefore what options you have, I can't advise whether it's your 'best' option.
Have you investigated whether it's an add-on or a plug-in - particularly Flash? Have you tried safe-mode? Have you tried anything?

Ever since I installed the most recent Firefox, might right clicker on my mouse does not work. How can I fix this?

When I log into Microsoft Outlook Web Access. I've always been able to use the right clicker on my mouse. Since I installed the new Firefox, I have not been able to use my right clicker. Any suggestions? Thanks.
== This happened ==
Every time Firefox opened
== I installed the new Firefox

Please can you be more specific as to what the issue is, when does it occur? Any error messages? every bit of information would help.

Installed the "update" for G-toolkit accidentally, no icon on opening screen and now can't delete...how do i delete an app with no icon

installed the update for "G-toolkit" and now want to delete it---bad review---- but am not getting it as an icon on the opening screen..its listed as an app under settings and its listed as installed at the app store...how do i delete it now?

Also having the same problems here.
Yesterday, I have downloaded the APPSGONEFREE and there is one App called the Victorian Mystery that is still free and i downloaded it. After a few minutes it pop up on my iphone homescreen, it can't be loaded. So I tried to delete it but it cant be deleted. (there is no x mark on top of it). I then use my itunes to synchronize it through my iphone but it wasnt able to delete it. I then bought the apps at apsstore ( Victorian Mystery), which is not free for today and I synchronize and it cant be installed on my Iphone. I just cant delete the APP. I need help.

ITunes update accepted and updated but still have 12.01 and cannot open iTunes!

On a MacMini 2010 era with Maverick 10.9.5 OS.
Cannot open iTunes after "updating" to 12.1
Just received an update notice for iTunes to new version 12.1, accepted the update and as required restarted computer.
Tried to open iTunes - does not open.
Checking the app info, the iTunes on my computer is still 12.0.1 and I'm unable to open iTunes app in any way.
Checking the Apple Updates log online it is showing the apps with this update (iTunes 12.1, Safari 7.5.3, Security update 2015-001) were logged as updated twice on the same date 2/12/15 in the updates record.
The current version of Safari on my computer is NOT 7.5.3 but is still 7.1.2. But at least Safari opens and works.
2 days ago updated my Mac Air without any problems.
Help / advice appreciated

Following another's suggestion I went to Apple online and downloaded iTunes 12.1 dmg package and installed.
Solved the iTunes issue, iTunes now opens and operates.
Correction: Safari update is 7.1.3 not 7.5.3. However...
As far as Safari update and Security update - who knows! Safari is not an download option with Apple as far as I can tell.

PPro and AME crashes...all the time. When you start them up, when you work, when you export, ever since I downloaded the updates last week.

I've been trying to edit and export timelapses I've shot in July. It's been an uphill battle since then.
First Lr gave me mountains of issues (seems to be doing ok now) and now Ppro and AMe is doing the same. Since I've downloaded the update last week they have both just stopped working. AME doesn't even want to start up anymore. Ppro starts ok but won't export anything anymore. The is one older project that I've finished before the update. That exports fine. But any new project I've created since refuses. I'm dropping the images into a 4k sequence, the dropping the 4k sequence into a 1080 sequence so I can ad some movement. Bet even if I take the images directly to the 1080 sequence it crashes the moment I hit export.
The timeline on this project is KILLING me! It's not supposed to take this long.
Please help!

Hi LFW,
Lowflyingweasel wrote:
I'm in South Africa. Don't know if the service here is somehow different. But I have tried during business hours! Your set Business hours. The online chat has been unavailable for days. I tried them twice before starting this thread.
Sorry to hear that. I'll raise the issue with my superiors a bit later this today. I have heard our chat software is disconnecting randomly in some cases. We are updating that system, but I can find out more later.
Lowflyingweasel wrote:
I am a little desperate and cannot believe that this tread had been active for 8 days without contact??!! If I posted wrong, or you need more info or whatever, please, why didn't anyone simply say that?
I am responsible for handling this forum and other products in the digital video realm. Because of the volume, it is not possible to answer every post. We do rely on the community to help out for posts like this, but some of them simply get by us. Yours was especially neglected and I apologize for that. Our forums are very good most of the time, but for a guaranteed response, you were doing the right thing by contacting support. The fact that both the forum and support failed you is very troubling and I'll see to it that you get the help you need. Since chat is not working for you, try the phone. Once connected, ask for the "video queue" so that you will be routed to the appropriate support team immediately.
Lowflyingweasel wrote:
I have restarted, reinstalled, tried to re-write the preference file, 8 new project file, re-exported all the images and could manage all but 3 time-lapses. They simply will not export. Not in ANY format from Pr CC 2014 nor via AME.
You may want to trash preferences for both Premiere Pro and AME. See the instructions below. I will also include troubleshooting steps I have been giving users. These steps may help you, as well.
Try the following:
Quit Premiere Pro, then reboot the computer. Launch Premiere Pro once more
Sign out from Creative Cloud, restart Premiere Pro, then sign in
Update any GPU drivers
Trash preferences
Ensure Adobe folder preferences are set to read/write in all 3 locations.
Delete media cache
Delete preview files: usually located here: Documents > Adobe > Premiere Pro > 8.0 > Adobe Premiere Pro Preview Files > [Your Project]Delete the preview files in this folder by dragging them to the Trash.
Remove plug-ins
If you have AMD GPUs, make sure CUDA is not installed
Repair permissions
In Sequence Settings > Video Previews, change the codec to one that matches your footage
Disconnect any third party hardware
If you have a CUDA GPU, ensure that the Mercury Playback Engine is set to CUDA, not OpenCL
Disable App Nap
Reboot once more
Thanks,
Kevin

Ever since I installed the latest upgrade, everything has gone wrong! Crashes, freezes, text warping.

Ever since I upgraded to the newest version, I've had nothing but trouble with my internet. Very frequent crashes. All of a sudden the whole screen will start flashing like the computer is going to explode. Freezes. The video plug in (QuickTime?) crashes, there is a visual warp halfway down my screen that makes the type look funny when I scroll a page. I'm thinking of de-installing Firefox. Can you help?

Quote from: Olahahacos on 16-March-05, 14:22:12
Hey , Ford Tech , can you give an explanation of what the setup with the CD drive and the master harddrive on IDE 1 will do .
I have the same PSU nazgoth has .
I'm just interested in the affect that setup will have with the power in the system .
If you have noticed my posts its more of a house electricity thing with my setup , the harddrive not getting enough power , temporarily I hope .
Not really a voltage concern.But I guess it could if both drives are running at the same time.With IDE, one is limited to two drives in a chain, and these drives cannot work at the same time. In essence, they must "take turns".So by putting 1 HDD as primary master and cd as slave,you will get the full performance of your drive.Most peeps only run CD roms for program installs and or CD burning or copying anways.
As far as the cable,yes there are 80 wire flat cables that work just fine.The only reason to go to the round cables is to improve air-flow and or the length of the cable itself.
I am sure many people use it the old fashion way with no problems.I just experienced a performance issue when I had HDD's on the same chain.It was mainly because I load all my games on my D drive.It also kept defaulting it to PIO mode which is the slowest mode.Since swaping the drives around on the chain(IDE1=HDD-Operating system-primary master and CD burner as Primary slave)(IDE2=HDD-Storage/gaming-secondary master and my DVD rom as secondary slave)Both drives run in UMDA-MODE-5 set up that way with no more problems

Can not connect to itunes store ever since I did the update.

I have tried everything from flushing my DNS, Reloading my itunes, checking my anti-virus software which is Symantec, Making sure my firewall enables itunes. One thing is that when i go into add or remove programs it asks if i want to repair itunes and i do but it still asks if i want to repair and still wont access itunes store.
*here is my diagnostics:*
Microsoft Windows Vista Home Edition Service Pack 1 (Build 6001)
Hewlett-Packard HP Pavilion dv9700 Notebook PC
iTunes 7.7.1.11
QuickTime 7.5
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.0.1.5
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 42C580F40E6F4782
Current user is not an administrator.
The current local date and time is 2008-08-04 20:51:10.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA MCP67M
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {65F39CFC-3037-41FF-AC42-EF0504A3706D}
Description: NVIDIA nForce Networking Controller
IP Address: 192.168.1.47
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Mon Aug 04 20:14:08 2008
Lease Expires: Tue Aug 05 20:14:08 2008
DNS Servers: 192.168.1.1
192.168.1.1
Adapter Name: {32BA9F3C-BA8E-4341-93E8-0DDB37CA58EA}
Description: Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
Last successful store access was 2008-08-01 20:56:32.

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

I tried to update iTunes yesterday. The update failed. Now when I try to open iTunes it says that the version isn't localized and needs to be run in English. It has never been in another language.

I attempted to update iTunes yesterday. The update failed. iTunes now won't open and displays an error message that the program isn't localized and needs to be run in the English version. I'm in the US and the computer and program has never been used in another language. I tried reinstalling the full download for the new version and that failed as well. I logged out; shut down; restarted; retried the update; etc. Still no luck and the same message. Thoughts?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Ever since I installed the new i0S 6.0 update on my iphone 4s it says "can not connect to itunes store" when I click on the "app store" on passbook. How do I fix this?

How do I fix this on my phone so I can access the app store and the new passbook app?

Did you try reinstalling the app and contacting the developer (there should be a contact link on the app's description page in the store) ? If you don't get a reply from the developer then you could try
'report a problem' link from the purchase history on your computer's iTunes instead of on your iPad : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link (iTunes support should reply within, I think, 24 to 48 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

Ever since I installed the update of Leopard 10.5.2 I cannot open itunes!!

Similar Messages

Maybe you are looking for