Every three weeks I can't get e mail error says wrong password what is happening?

WWhy can't I get e mail every so often - an error message says my password is wrong and I change it but does no good?

I am assuming  you are referring to your @verizon.net address, since you didn't specify. There is a help page for setting up your client located here that includes a video link if you would find that more helpful.
For the sake of example, we are going to pretend that we are setting up  fictional account "[email protected]" and the password for logging into that  account in webmail is "fakepassword" - Again, this is a fictitious account for the sake of an example.
The settings for using Verizon's servers would be:
Incoming Server: incoming.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a secure connection (SSL): No
Port: 110
Outgoing Server: outgoing.verizon.net
Server Requires Authentication: Yes (You can set it to use the same settings as incoming, or manually enter the username and password.)
Requires a secure connection (SSL): No
Port: 25 (although 587 also works.)
These settings should work unless you have a Verizon/Yahoo account, in which case the server names are: incoming.yahoo.verizon.net  -and-  outgoing.yahoo.verizon.net
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Similar Messages

  • I put my password into my airport extreme and says wrong password what can I do thanks

    I put my password into my airport extreme and says wrong password what can I do thanks

    If your password is incorrect, perform a "soft reset": momentarily depress its reset button, and launch AirPort Utility. A "soft reset" will lower the Extreme's shields for about five minutes, so that you can configure it with a new password.
    AirPort Utility is in your Mac's Utilities folder.

  • I downloaded OS X maverick but now can't get into mail or enter keychain password. Nothing is working

    I downloaded OS X to my Mac book pro.  Now I can't get into yahoo mail or enter my keychain password.  What should I do?

    Do you have OS X and OS 9 installed on your Mac? If so, startup with the Option key depressed. This will open the Startup Manager window. Select the OS you want to start from & click the right arrow.
     Cheers, Tom

  • HT201272 I can't get the app open, maybe wrong password ...help!

    I can not get my app  to open. It requires a password and I either am not typing it in correctly or have forgotten it....help, there is no reset password. What to do?

    You can't get what app to open ? If it's an app that you've downloaded from the store then is there help on the developer's site ?

  • Can I get the value for community site's What's Happening web part with Powershell?

    I need to generate some statistic reports for our SP2013 community site. Some of figures I need are "no. of discussion", "no. of replied" and "no. of members" which are already listed in the "What's Happening" web
    part.
    Can I directly get this counters with PowerShell instead of calculating from "Discussion Board List"?

    Hi,
    As we can see from “Site Contents” page, the data displayed in the “What’s happening” stores in these two lists “Community Members” and “Discussion List”, if you want to retrieve
    the data using PowerShell, we will need to access these two lists directly.
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Patrick Liang
    TechNet Community Support

  • When I put an appointment into my iphone calendar it will not let me repeat the same appt. every three weeks.  How do I get it to set it every three weeks?

    I cannot repeat an appt every three weeks.  What to do?

    I believe there are also other calendar apps available in the App Store that will give you more repeating options. I'd browse through that section of the store.

  • TS3992 i have the message that the ipad has not been backed up successfully in 2 weeks, but can not get past the message to use the Ipad

    I am trying to unlock my ipad with the message that the ipad has not been backed up successfully in 2 weeks, but can not get past this screen. I have plugged it in, it is connected to the internet, but will not back up or do anything else.  What can I do?

    Welcome to the Apple Support Communities
    Hold Sleep and Home buttons until the iPad restarts, so you will be able to use your iPad

  • Can't get into Mail on iPad 2. Returns to home page with blank white screen.

    Any help appreciated. Recently can not get into mail account on iPad 2. Seems to go to blank white page and then returns to home page. thanks, m

    Hi,
    If your OS is Linux you can update Firefox using the Package Manager / Software Center. After opening the Manager type '''firefox''' in the search area, tick '''firefox''' in the results and apply. You may also be asked to accept additional new dependencies.
    or
    You can directly download the latest version for Linux here: https://www.mozilla.org/en-US/firefox/new/
    It is a zip package and you have to unzip it and run the script file named '''firefox''' inside the unzipped folder. You have to go inside this folder every time to run this file or you can create a link to the '''firefox''' file on the desktop. In this case please note that the old Firefox installation will still exist and the usual links will open that instead of the new one.

  • I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITun

    I am having an installation failure issue with my itunes 11 software.  File is corrupted and i don't know what to do.  I've un-install and re-installed the software three times and continue to get the same error message.  It states that "This copy of ITunes is corrupted or is not installed correctly.  Please reinstall Itunes"
    iMac, iOS 6

    HI,
    If your old version of iTunes is still working - then I sugest you stick with that.
    iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
    Just a friendly advise and warning :-)

  • I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings

    I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings

    OK, but in my ipad, the apple id i have in itues is already the one  iwant to have, but th one i used to sin in for i-coud is the other one. Any tip as to how to change the apple id for icloud and any idea how to know what apps i bought with the other apple id so as to delete them from my ipad to avoid being asked to enter another apple id every time they get updated? thanks!

  • Every time i launch garageband i get this message "Error code 28773 was returned by the Audio driver."

    HI. I just got a new macbook pro 15".
    every time i launch garageband i get this message
    "Error code 28773 was returned by the Audio driver."
    when i hit record, the shaded area in GB starts to advance, but it doesn't record any sound, and when i hit the space bar, the recorded area disappears.
    anyone know how to fix this?
    I have installed BOOM, but i think that's the only extra sound software i have.]
    PLEASE HELP!
    thanks,
    mojoman22

    Please read this whole message carefully, especially the warnings, before doing anything.
    1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
    2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
    3. You should either remove or update the following system modification(s), if an update is available from the developer:
    Parallels
    and definitely remove at least the following:
    Boom
    † MacKeeper
    † VirusBarrier
    4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
    Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
    If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
    5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
    6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
    Remove the "MacKeeper" crapware as follows.
    Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions, nor do I intend to repeat the test.
    IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
    In the Finder, select Go ▹ Applications from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. A dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall button. All the functional components of the software will be deleted. That's the only useful feature of "MacKeeper:" it deletes itself. Reboot.
    Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
    Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
    The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
    The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.

  • Can't get E-mail

    I have a WRT150N wireless ,  hardwired to two desktops and wireless to one laptop. Can't get e-mail from the laptop. E-mail works fine from both desktops. I get an error message on the laptop, "server not found". I can access the internet from all three computers with no troubles.

    Check you email settings on the laptop. Also, make sure no firewalls are blocking whatever email client you are using.

  • How can I get past the error messages that keep popping up when I try to download Flash player?

    How can I get past the error messages that keep popping up every time I try to download anything?

    Hi
    Could you please let us know more about the error messages that you got?
    The following page has information on the error messages: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html
    Thanks,
    Sunil

  • I charged my phone and now I can't get it to turn on again. What do I do? I can't find a solution here. All I get are error messages.

    I charged my phone and now I can't get it to turn on again. What do I do? I can't find a solution here. All I get are error messages.

    Try pulling the battery for 10 minutes and putting it back in.  Try pressing and holding the power button for a while 15-30 seconds to see if it will respond.  Did anything happen to it, drop, submersion, etc. Was it functioning before you charged, When did it last work. Are you sure it charged up and the charger is working.

  • Mail account cannot update because home directory is full. But I can not get into mail without freezing. Is there a back door entry?

    mail account cannot update because home directory is full. But I can not get into mail without freezing. Is there a back door entry?

    Do you mean that your startup disk is full?

Maybe you are looking for

  • Maintenance View issues with an ABAP program

    Hi, I need to update a Maintenance view(V_JURIC) from a txt file. I created an ABAP module to do this and when I update the tables that compose the view(TABLE_A and TABLE_B), the view is not completely getting updated in the last field. Any suggestio

  • Gui_download - last line

    Hi, The function module gui_download always create a blank line at the end of file created. But I need a file without this last line. How can I do that ? Thanks !

  • DAQ external triggered at 5kHz

    Hello expert, I got totally confused as I tried to do some externally triggered DAQ with my DAQPad-MIO-16XE-50 board. My problems are the different kinds of counters and timers and functions to control them. I added a piece of code, which I think sho

  • My 2010 imac 21.5 will not power up

    what do i do..my imac will not power up...it comes on, and goes back off....HELP

  • I have a mac osx and want to use a magic jack without the computer on all the time.

    I am trying to use a magic jack plus without plugging into my mac.  (It will work plugged directly into the computer but I bought it so I would not have to keep my mac on all the time to use the phone). What do I need to get a separate modem.  I am o