Every time I create a button it moves to the centre of the page when outputing to pdf

every time I create a button it moves to the centre of the page when outputting to pdf
I have done a load of tests and it does it every time
I imported a jpg image as my button. Converted it to a button by Interactive/convert button. Even before I setup all the options in the buttons panel it moves. So for instance I have the button in the bottom RHS in Indesign. Then make a interactive pdf and its in the centre of the page. I have even converted the image back to an object and it goes back to in proper position.
I have tried this in several documents, starting from scratch and using different images and also drawn a button. I have also used the buttons from the button library
In previous version of Indesign I have never uncounted this problem.
2 weeks later to above post
Can anyone help this has not be resolved and I have several annual reports to get out urgently. Its happening to all documents!

every time I create a button it moves to the centre of the page when outputting to pdf
I have done a load of tests and it does it every time
I imported a jpg image as my button. Converted it to a button by Interactive/convert button. Even before I setup all the options in the buttons panel it moves. So for instance I have the button in the bottom RHS in Indesign. Then make a interactive pdf and its in the centre of the page. I have even converted the image back to an object and it goes back to in proper position.
I have tried this in several documents, starting from scratch and using different images and also drawn a button. I have also used the buttons from the button library
In previous version of Indesign I have never uncounted this problem.
2 weeks later to above post
Can anyone help this has not be resolved and I have several annual reports to get out urgently. Its happening to all documents!

Similar Messages

  • Every time I open a website other than Google, the page pretends to reload after loading and then does not fully load.

    In both Firefox 3.6 and Firefox 4.0 when I open pages such as wincustomize.com, as soon as the page loads, the page goes blank as if it is reloading. However, although the URL of the website stays the same, and the page seems to continue working, the page never loads. However, when I open pages such as Google.com, the page opens as normal. Also, if i stop the pages loading after it is almost finished, then it does not switch pages. How can I fix this?
    == This happened ==
    Every time Firefox opened
    == A week ago ==
    == User Agent ==
    Mozilla/5.0 (Windows; Windows NT 5.1; en-US; rv:2.0b2pre) Gecko/20100707 Minefield/4.0b2pre ( .NET CLR 3.5.30729)

    Try clearing your cache and cookies.
    # Open the Tools menu, then select Clear Recent History... .
    # In the '''Time Range to clear:''' drop-down, select '''Everything'''.
    # Click the arrow next to '''Details''' to display the list of items that can be cleared.
    # Select both '''Cookies''' and '''Cache'''.
    # Click Clear Now .
    Also try creating a new profile by going to [[Managing Profiles]]

  • I unsubsribed from Get Glue and now every time I open Firefox, Get Glue opens on the page and I cannot get rid of it. I like Firefox and would like to use it, but the problem with Get Glue coming up each time I open Firefox causes me not to use Firefox.

    Don't know what to add. How do I get rid of Get Glue and have Firefox open by itself?

    This sounds more like a Windows question, than a Firefox question. When you say that an image shows up every time you open your computer, do you mean every time you turn on your computer, or every time you start Firefox?

  • Every time I scroll up on my wireless mouse, the page scrolls down instead.

    Everytime I scroll up on my WIRELESS MOUSE, the page scrolls down instead. When I scroll down, the page scrolls up! Help? What happened? Do I need a new one?

    You can change it in System Preferences > Mouse > Point & Click tab > uncheck Scroll direction: natural.

  • Hello  Every time I create a motion menu the play buttons have a fuzzy outl

    Hello
    Every time I create a motion menu the play buttons have a fuzzy outline. I really don't like this and would love to know how to avoid it as it looks really bad and not crisp.
    Here's how i do it:
    1) I create the motion menu in AEX and add in the button here. I have the button coming in about 5 seconds after the start to give a delayed effect and this will therefore be the loop point I set in DVDSP.
    2) I then export out a Photoshop layers file from AEX and then bring this file into Photoshop to make the overlay. I'm not sure if I'm doing this step correctly as I then go Image/adjustments/levels and make the play button black
    3) I then make the menu an .m2v and bring this and the overlay .jpg file into DVDSP.
    4) When I select the play button the edges go fuzzy. This particular PLAY button was the text PLAY in white, with a black outline. Maybe this black outline had something to do with it?? I've also had heart shaped buttons for example and this does the same thing.
    Hope you can help.
    Many thanks, Margie

    One thing that could help is not using a .jpg which is compressed. A .tif may work better (to some degree).
    Not sure if you are using text highlights or something else when you mention you make the button black. Larger text (20pt plus, Sans Serif) can often help. Part of it also may be the selection process of what you are changing. Sounds like you are sending out the highlights as a seperate layer by itself. If so you do not not to switch it to Black, depending on the color you can map it out in DVD SP.
    Another thing is that if the highlight is in the motion menu (unhighlighted) the highlighing may be slightly off of the underlying item making it a bit fuzzier. Could also be colors.
    On pt 4, not sure if you mean select as "I pressed the button for the action" or as just moving to the button. If the former, then there can be a slight shift as the DVD itself moves to different place. Feathering the black edges may also help....

  • Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

    Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    Trash the Preference file:
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    from: jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    from Karsten S
    Shorter clips than 1,5 sec might be one of the culptrits
    Bengt cont.
    Set-Up might differ
    • Mac OS - most probably X.7 or more
    • iMovie version - more than iM'11 v. 9.0.4
    Action taken
    • Finalizing project - I never do as I never understood the gain to do so
    • Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
    fps - set
    •I only use PAL (25fps)
    Yours Bengt W

  • I made a video in imovie and saved it, now i want to carry on making it from where i left but every time i try to add an image onto the end it just goes tot he wrong part of the movie, how do i just add it onto the end?

    I made a video in imovie and saved it, now i want to carry on making it from where i left but every time i try to add an image onto the end it just goes tot he wrong part of the movie, how do i just add it onto the end?

    Have you seen my User Tipp here
    "Movie Magic" with Stills and Dissolve
    When you 'prep' your stills in any 'picture app', you can do a lot of marvel by simply applying dissolves.
    In your case, I would create a white document (in Pixelmator, Keynote, Photshop, online at pixlr.com, whatever ...) and another with your logo (and further more ones with additional logos). Drag the jpgs into your iMovie Project and apply dissolves  - tadahh! - logos appear on white.

  • Quicktime wont start & crashes every time i try to play a .mov file or open

    I have been getting this error every time i try to launch Quicktime 7.65.17.80 or every time i try to run a .mov file. Here is the information that i get when getting this error. Also i have tried looking online for a solution to this and cant find one. I have also tried uninstalling it completely and then reinstalling it but that does not seem to help.
    QuickTime Player has encountered a problem and needs to close. We are sorry for the inconvenience.
    If you were in the middle of something, the information you were working on might be lost.
    For more information about this error, click here.
    Error signature
    EventType : BEX P1 : QuickTimePlayer.exe P2 : 7.65.17.80
    P3 : 4afa5828 P4 : QuickTimePlayer.dll P5 : 7.65.17.80 P6 : 4afa5820
    P7 : 0000130d P8 : c0000409 P9 : 00000000
    To view technical information about the error report, click here.
    The following files will be included in this error report:
    C:\DOCUME~1\xxx-xxx\LOCALS~1\Temp\WERc394.dir00\QuickTimePlayer.exe.mdmp
    C:\DOCUME~1\xxx-xxx\LOCALS~1\Temp\WERc394.dir00\appcompat.txt
    Any help or suggestion or if you need to give more information or do anything just let me know. -NAME13013

    Can you check something else for me please, Name?
    Head into your control panels and try to launch the QuickTime control panel. What error message do you get then? (Precise text please ... the information in the error message about where QuickTime thinks the QuickTime.cpl file lives can be of some help with diagnosing the nature of your problem.)

  • TS4163 Every time I try to export my movie into a Windows Format from compressor it shrinks the movie to 27 seconds.WHY? HELP

    Every time I try to export my movie into a Windows Format from compressor it shrinks the movie to 27 seconds.WHY? HELP

    Probably because you have the free version of Flip4MAc from Telestream that limits exported files to 30 seconds or so. There ae several paid versions  – depending on your requirements
    Good luck.
    Russ

  • QT v10.0 crashes every time I try to share a .mov file to my mac gallery

    Does anyone have any thoughts on why QT v10.0 would continuously quit on me every time I try to share a .mov clip to my mac gallery? The sharing option on my co-workers computer works- so I know it must be something with my own mac, but haven't the faintest idea where to begin my troubleshooting... help?

    Can you check something else for me please, Name?
    Head into your control panels and try to launch the QuickTime control panel. What error message do you get then? (Precise text please ... the information in the error message about where QuickTime thinks the QuickTime.cpl file lives can be of some help with diagnosing the nature of your problem.)

  • My iphone 4 is talking every time i press a button how do i turn it off

    my iphone 4 is taliking every time i push a button how do i turn it off

    Settings>General>Accessibility>Voiceover>Off.

  • TS4002 every time I create an account with iCloud then try to open it I get wrong ID or password

    Every time I create an account with iCloud then try to open it I get an error message: wrong ID or password. Also when I enter my birth date I am told it is incorrect. I have done this several times with the same results

    Have you tried this: My Verizon Forgot Your User ID

  • Every time I create an account with iCloud then try to open it I get wrong ID or password. Even when I enter my birth date I am told it is incorrect. I have done this several times with the same results.

    Every time I create an account with iCloud then try to open it I get an error message: wrong ID or password. Also when I enter my birth date I am told it is incorrect. I have done this several times with the same results.

    Oldcameraman
    Please do not duplicate a thread. The threads are answered as soon as possible. We are not Adobe. Just user to user.
    I have answered your most recent of the duplicates
    Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work
    It is uncertain just how far we can go to help you since you do not appear to have Premiere Elements any
    longer.Seems you demanded a refund from Adobe Chat, got it, and now are left with a non purchased program which I
    am not sure can be used.
    Duplicates tend to confuse the person asking the question as well as those attempting to reply. As I suggested in the
    above mentioned thread, try to sort out your situation with Adobe via its Adobe Chat.
    ATR

  • Every time system create new production order after releasing sales order c

    Hi Guru,
    FG material strategy: 82 (sales order creates production order).
    After creating the sales order it goes in to credit block. Whenever we release sales order from credit block through VKM1, system has created production order. We confirmed this production order and delivered.
    But after this sales person change the sales order value, because of which again sales order goes into the credit block and after releasing sales order from credit block system create new production order even if one production order already confirmed and delivered against the same sales order.
    *Every time system create new production order after releasing sales order credit block.
    Thanx & regards
    pnu

    PNU,
    So, to restate:
    In MD04, you have Unrestricted Sales order Stock ('E' Stock) on hand.
    In the same MRP segment, and against the same Storage Location as the stock, you have a Sales Order requirement that was recently blocked and unblocked.
    During the unblocking event, the system produced a new production order.
    This is not normal.  If the above accurately depicts your situation, I would look for an altered Strategy 82, or a userexit.  SAP ATP (the beginning event of the Strat 82 process) will normally first check for the availability of stock.  Only if the stock is not available, then it will create the new production order.
    Best Regards,
    DB49

  • Every time I create a software instrument, It is created as an EVP88

    Every time I create a software instrument, It is created as an EVP88 INSTEAD OF THE DEFAULT green empty software instrument. Also, I can't seem to change it to other things...audio units, etc. I am just learning logic, but this seems odd.
    Please help.

    Uncheck the "open library" box when creating new software instrument.

Maybe you are looking for