Every time I sync my itouch I get the following message - "iTunes could not back up the iPod because the backup was corrupt or not compatible with the iPod. Delete the backup for this iPod, then try again." But I get the same message again.... Any ideas?
Every time I sync my iTouch I get the following message - "iTunes could not back up the iPod because the backup was corrupt or not compatible with the iPod. Delete the backup for this iPod, then try again." However, when I follow these instructions, delete the backup and try again - I get the same message. Any ideas what is wrong?
Hi,
Try this thread. https://discussions.apple.com/message/12661408?messageID=12661408
Carolyn
Similar Messages
-
I tried to update my iPhone4's, but get the following error message: iTunes could not back up the iphone "iPhoneName" because the backup was corrupt or not compatible with the iphone. Delete the backup for this iphone, then try again.
The solution will be found here, select your computer type and software.
http://support.apple.com/kb/TS2529 -
I just got my refurb iPad in the mail. I am trying to set it up, but i am getting this error message " iTunes could not back up the ipad because the backup was corrupt or not compatable with the ipad. Delete the backup for this ipad. Then try agian." How do I do that?
It sounds like the iPad wasn't erased to me. If the iPad is totally cleared of content, there should be nothing on it and no backup to create.
Without connecting the iPad to your computer - Launch iTunes on you computer and go to Edit>Prefences>Devices. Do you see an iPad backup in there? If you do see it, delete it. -
Error message when attempting to backup up iPhone4S to Mac says "iTunes could not back up the iphone because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again." But how do I delete the backup? Can't find answer to that anywhere.
We had this problem after upgrading to iOS 8. The iPhone 5 would not backup either to the cloud or to the computer. Backup always ended with an error message.
Long story short, with the help of iFunBox ( which I used to make manual backups of some important iPhone data files ), I discovered two games that
would crash iFunBox. They were not important games for us, so I didn't try to isolate the offending data files. And I deleted the two games from the iPhone.
Apparently these two games conflicted with iOS 8 just as they did with iFunBox. The next backup without those games was then successful.
I backed up to both the Mac and the cloud.
Hope this helps. -
I inadvertently deleted my iPhone backup on my MacBook Pro. I restored iPhone to factory settings and then synced remotely with iCloud. However the error message repeatedly states:
iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again.
Any ideas as to how this can be resolved please. Thank you very much.My wife's iPhone 5 would not backup, after upgrading to iOS 8. The "genius" at the Apple store succeeded in DELETING, the only recent backup of her phone so
recovery became more critical.
I followed all the procedures for troubleshooting it, but still it would try to backup and then stop due to an error. We particularly wanted to preserve some game data/history/progress that she'd been working on for years. This game (Dream Fish) would no longer open after the iOS 8 upgrade ... and the phone would not successfully backup, and so we had no confidence that it would restore from an older backup either. I googled for solution and found Phoneview and iFunBox. These apps allow you to see & access data files in the iPhone. Phoneview was too fragile and crashed when copying a file any size.
I found "iFunBox". iFunBox was excellent. I used iFunBox to recover her game data. It allows you to make a copy of data files that reside on the iPhone... and store them as a manual backup on the Mac.
And in the process I found 2 games that caused iFunBox to crash. The 2 games in question were not important enough to try to keep, so I deleted them from the iPhone.
So then, I had a manual backup of the important iPhone data, and had eliminated two game files that apparently had a conflict with iOS 8.
My next Backup attempt was successful. The iPhone with iOS 8 would now backup to both the Mac and to the Cloud.
Next I deleted Dream Fish from the iPhone and downloaded a fresh version from the Cloud. The new Dream Fish with no history opened in iOS 8.
Then I used iFunBox to copy my wife's Dream Fish data history from the Mac back into the new game.
Once the transfer was complete, Dream Fish would now OPEN and all of her progress was there and working like normal.
Hope this helps. -
Iphone 3gs won't back up in itune on the computer, but it will sync. the message read on the computer is because the back up was corrupt or not compatible with iphone. Delete the back up for this iphone then try again.
Launch iTunes. Then from the menu bar at the top of your screen click iTunes / Preferences then select the Devices tab.
Delete any iPhone backups.
Quit then relaunch iTunes. Connect the iPhone to your computer and try syncing.
More help here > iTunes: "Backup could not be saved on the computer" alert message -
While trying to update my iPhone 4s I received this "iTunes could not backup the i Phone "Owner's iPhone" because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again. I have a PC and cannot find the backup in question to delete. Any ideas?
Here are location of your Backup folder(s):
Win7 - C:\Users\<username>\AppData\Roaming\Apple Computer\Mobile Sync\Backup
Vista - C:\Users\<username>\AppData\Roaming\Mobile Sync\Backup
Winxp- C:\Documents and Settings\<username>\Application Data\Apple Computer\Mobile Sync\Backup -
I'm totally frustrated by iTunes and don't know how to solve my problem. Like a lot of people on here I'm not able to sync or back up my iPad2 with my iTunes (version 10.4.1.10). I'm running Win 7 Ultimate 64 bit. My iTunes worked just fine until the 10.4.xx updates came out and since June I've not been able to back up or sync the iPad2.
When I connect and try to sync I get the error message, “iTunes could not back up the iPad because the backup was corrupt or not compatible with the iPad.”
I've deleted all the old backups so there are none on my system. I've deleted iTunes and re-installed the 64bit version several times but it has not made any difference. I've read and followed several suggestions on these boards about how to remove and reinstall everything but none have worked yet. I'm stumped here.I had the exact same thing with my shuffle - same error message saying that it was corrupt so I restored it (wiping everything in the process) and the same message came up as soon as it reloaded. Thank god I didn't try it with my iPod or iPhone first. So many issues with this new version of iTunes!!!!!!!!
-
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
i am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?
As I said the iTunes program on the computer. You open iTunes on the computer and go to the View menue in the upper rightand then click on preferences. Go to Devices and delete the backup.
-
I have recently updated my phone and am attempting to sync it. I got the error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone". I deleted the backup, restarted my computer, and even restored the iPhone, but continue to get the same error message. What do I need to do now?
iTunes places the iPhone backup in the following location. Navigate there & delete everything in the backup folder, but not the folder itself. You will have to turn on "Show All Hidden Files & Folders" to see it:
Mac:~/Library/Application Support/MobileSync/Backup/
Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\ -
I am using iphone 3GS, after syncing for few times and got the errors. I deleted the backup from Edit-> Preferences-> Devices. Then I synced again, there was an error message: itunes could not back up the iphone because the backup was corrupt or not compatible with the iphone. What can I do? I have no backup anymore on ituens.
babesharon
I closed iTunes & manually deleted the file which was still stored locally even though it didn't display in Preferences. I have vista so I went to
C:\Users\{user name}\AppData\Roaming\Apple Computer\MobileSync and deleted everything in the Backup folder (though I left the folder as is). If you have a different OS search the apple website for the backup location.
I reopened iTunes & Synced with out a problem. I also got the update to install.
Good luck. -
I have installed 0S5 but restoring the backup doesn't work. the following messages appears: An error accurred while restoring this iphone (-20), followed by another message: because the backup was corrupt or not compatible with iphone being restored (my iphone is 3GS), I tried restoring the factory settings and then restore the backup, but the same problems and I have lost all my contacts, pictures etc
Hi Ckuan,
Thanks a lot for your advice.
Deleting the correupted back up means to delete the information of one month since the last back up I made is one month ago.....right?
This back up I made right before I restored my iphone. During the restore however my OS was upgraded to 5.1.1. and reading the comments on the internet it seems I am not the only one whom experience this problem.
Can it be that if I downgrade my OS back to 5.1. the back up will not be considered as corrupted? If so, how do I downgrade the iphone?
Thanks in advance. -
I have an iPhone with iOS 7.1.1 and am trying to update to 7.1.2, but get an error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone"
Assuming you are using the current version of iTunes (11,2,2), open iTunes, click "Preferences" under the leftmost entry on iTunes' menu, then choose "Devices".
Find the iPhone's backup there, highlight it, and choose "Delete Backup". -
I have ipad 3 iOS 7.1 last update when connect to my macbook osx 10.8.5 get the following error "iTunes could not check for an update to the carrier settings for your iPad A unkown error occurred 1651"
any help pleaseIf you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa
Maybe you are looking for
-
I am running Windows 8.1, adobe will not launch, please advise
Can anyone help me resolve why acrobat 10 will not launch in windows 8.1, thanks
-
Hello In the following piece of code: import static tools.Print.*; interface ForInner { void who(); String toString(); class ForInnerWithParameters { int i; String s; ForInnerWithParameters(int i) { this.i = i; clas
-
Quicktime export failed - out of memory
After I managed to open AVCHD (MTS) movies with AE CS4 I just tried to export a 2 min movie. I export as H264 1280x720. I keep getting this error "quicktime export failed - out of memory" It also happend when using SD movies I have 2GB ram and a dual
-
Change form target dynamically
Hi all, I have a Struts form, declared as: <html:form method="POST" action="myaction" target="_top"> This form uses the ActionForm validate. When the validate method returns no errors I need the Struts action to display the result page in the "_top"
-
Hi All, We are using z tables to get BOM data and not using standard tables. So I have to suppress the message that comes when it does not find any data in standard tables. The message is "The system did not find a valid bill of material". Which exit