Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe-Unable to locate component - "this application has failed to start because CoreFoundation .dll was not found," Reinstalling did not fix problem.

Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe - Unable to Locate Component -
"This application has failed to start because CoreFoundation.dll was not found.  Re-installing the application may fix this problem.
I uninstalled and re-installed itunes and the message still appears.
How do I fix this??
Thank you

With that one, first try uninstalling and reinstalling your MobileMe Control Panel for Windows, robin. Does that make the error go away?

Similar Messages

  • After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    I hope it doesn't effect how I down load my itunes to my ipod and iphone.
    No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.)

  • Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

    itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
    I'm on a Dell PC running Vista Home Premium.
    HELP!!!!!!!!!!!!!!!!!!!

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.

    I recently tried to download the latest version of iTunes, but an error occured during the process. It was recommended that i reinstall iTunes to attempt to correct that problem. After I attempted to reinstall, an error came up with the title "iTunes.exe - Unable to locate component." the body of the error message read "This application  has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." When I click "Ok", another error message pops-up reading "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)". I tried reinstalling iTunes 3 times now, each time with the same result. What is going wrong, and what do I need to do?

    Kappy, I completely overlooked your original response due to it's small, one line nature and poor UX design of the area surrounding the message area.
    Upon following the complete instructions linked from the link you posted (http://support.apple.com/kb/HT1923?viewlocale=en_US&locale=en_US), my first attempt resulted in everything being installed except for iTunes. So trying yet again.
    I do have Safari for Windows Vista installed, which is why I could not delete everything in the C:\Program Files\Common Files\Apple\ folder. I'm guessing this is Apple's way of completely removing Safari Win from history (there's always an under-the-table reason when something like this happens with Apple installs, they just won't say it publicly). Uninstalling Safari. Uninstalling Safari removes the remaining "Internet" files from C:\Program Files\Common Files\Apple\
    Uninstalling iCloud. Uninstalling MobileMe Control Panel that was never used. That leaves only QuickTime installed as an Apple product on my machine.
    Just for the record, I did not have this folder: C:\Program Files\iPod\
    Emptied the Recycling Bin.
    Shut down and fresh start-up.
    Install attempt again: results in the installer saying something interrupted it (no other programs open)
    Installing again immediately after error: Success
    Clearly there are issues with this installer.
    A pop-up shows up with "The registry settings used by the iTunes drives for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burining software. Please reinstall iTunes"
    No other CD burning software installed other than what came pre-installed by Gateway and a install of Windows Vista Pro (or whatever the top expensive one was called).
    iTunes launched. iTunes Library, items like Movies & Music, and playlists are still intact and usable.
    Good thing I don't have these issues on my Macs (ahem, which is why these errors are allowed to persist by Apple to discourage Microsoft/Windows/PC use and purchase, all about the money and Apple has become the non-caring giant it once sought to overthrow as the underdog, miss those days).
    Thanks Kappy. Thanks for the time suck Apple.

  • TS1717 recent update of software crashed. Now when opening i tunes I get message "this application has failed to start because MSVCR80.dll was not founds. Re-installing the application may fix this problem. Re-install has no effect!

    recent update of software crashed. Now hwen i try to open i tunes, i get message "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem" - It has not!

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99750)

  • HT1926 My itunes won't open because it says "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem" Can someone help? I don't want to delete it altogether due to needing the phone backup

    I was given notification to upload the latest version of itunes recently, so I clicked installed. However it has since corrupted my itunes and I get the error message:
    "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem".
    In poor timing, I have also accidently damaged my phone and have a new one to restore it to an old back up.
    It is because of this I am reluctant to completely delete itunes off my computer and start again for fear of losing my back ups.
    Is there another way to fix iTunes so I can open it again?
    Thanks

    Hey I finally got an older vesion of itunes to work!!! 10.7  x64 for windows 7
    After uninstalling all apple products even  quicktime
    I had to delete everything from (program files, and program  files x64, program data,)
    And all downloads from apple, and I went in to search deleted  other stuff from apple, and itunes
    But definently not my itunes library and Playlist
    Down loaded 10.7 x64 for windows 7, but checked (do not start  when done)
    Then I emptied my recycling bin and restarted my  PC
    I ran geek tech tool box same as reg cure pro, also PC Tools  registry cleaner, and CC Cleaner
    Then I emptied my recycling bin and restarted my  PC
    And wallah... It finally works, and I Love the older version  anyways.
    Easier to download and transfer  music!!!!!

  • HT1926 I try to download Itunes and when i am done it i tried to open it and it said "This application has failed to start because MSVCR80.dll was not found. re-installing the application may fix this problem"

    i tried to open itunes and it said "This application has failed to start because MSVCR80.dll was not found. re-installing the application may fix this problem" and "itunes was not installed correctly. please reinstall itunes. Error 7 (windows error 126)" what does this mean and how do I fix it? I reinstalled itunes and this just popped up again :C

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.  I have re-installed, SO many times and I still cant open iTunes.

    Hi Support,
    I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
    Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
    I have re-installed, SO many times and I still cant open iTunes.
    Please help!!

    Click here and follow the instructions.
    (98888)

  • I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

    I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • HT1349 When trying to run itunes on my PC, get this message. This application has failed to start because MSVCR80.dll was not found.

    When trying to run itunes on my PC, I get this message. This application has failed to start because MSVCR80.dll was not found. Do you have any clues on a solution?

    Welcome to Apple Support Communities
    A solution is listed in the thread below.
    It probably and other similar discussions appear in the More Like This window to the right of your question. The ones with a green check mark are questioned marked 'answered' by the original poster.
    https://discussions.apple.com/message/24610401#24610401

  • TS3212 I cannot get the new iTunes to start in Windows Vista. I get an error that states "This application has failed to start because MSVCR80.dll was not found". Reinstalling does not help.

    I get an error that states "This application has failed to start because MSVCR80.dll was not found". Reinstalling does not help.I have tried removing iTunes and reinstalling, I have tried "repairing" option at reinstall, nothing seems to work.

    Read this:
    iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue

  • This application has failed to start because msvcr71.dll was not found

    Hi,
    I just downloaded the Flex 3.3 DK from here:
    http://www.adobe.com/cfusion/entitlement/index.cfm?e=flex3sdk
    Once unzipped I went to run this:
    C:\DATA\My Documents\_jim\flash\open-source\_Software\flex_sdk_3\bin\mxmlc.exe
    When I ran it, I got this error
    This application has failed to start because msvcr71.dll was not found. Re-installing the application may fix this problem
    I searched on Google, and found this:
    http://www.flashdevelop.org/community/viewtopic.php?f=13&t=2932&start=15
    So from there, downloaded "msvcr71.dll", placed here:
    C:\WINDOWS\system32
    And ran the following in the Command prompt: regsvr32 "msvcr71.dll".
    When I did that, I got this error message:
    msvcr71.dll was loaded but the DLLRegisterServer entry point was not found
    The file was not registered
    I saw that the DLL is related to Microsoft Visual Basic Runtime, so I deleted the dll I saved manually, and ran the Microsoft Visual C++ 2008 Redistributable Package (x86) from here:
    http://www.microsoft.com/DOWNLOADS/thankyou.aspx?familyId=9b2da534-3e03-4391-8a4d-074b9f2b c1bf&displayLang=en
    Once done, the dll was not placed in the System32 folder.
    I tried the manual install of the DLL again, but on trying to register it again, got the same error message.
    Has anyone else had this problem?
    Seems like I might have hit a brick wall.
    Thanks

    What operating system? 32-bit or 64-bit?
    Which version and edition of SQLDeveloper (with/without jre, 64/32-bit)
    What JDK version?

  • Updating iTunes with error message "this application has failed to start because MSVCR80.dll was not found"?

    After updating iTunes, has anyone got the message "this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." message and "iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 126)"?  I've tried everything from un-installing and re-installing iTunes to deleting the SC Info. Any help would be greatly appreciated

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99840)

  • HT6001 I have tried numerous time to update iTunes to Version 11.1.4.  Each time it has failed. I get the message of "This application has failed to start because MSVCR80.dll was not found".  Also I get a message of "Error 7". Advise please.

    I have tried numerous time to update iTunes to version 11.1.4.  It has failed every time.  Now I can't even get into iTunes on my PC.  The message I get is "This application has failed to start because MSVCR60.dll was not found.  Re-installing the application may fix the problem."  Okay. Which application?  What steps are needed for this process?
    Also, I get this message "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 126)"  Could someone please assist me in the steps necessary to remedy this issue.  Thanks.

    For many users at this point in time (iTunes 11.1.4.62) uninstalling iTunes alone is not enough and they may need to undertake further steps...
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • This application has failed to start because SapNi.dll was not found

    On the advice, good advice, of Melanie and Lars, here is a new thread for my question.
    I'm assisting with a migration of SAPDB, on Windows Server 2003, to MaxDB 7.6.xx on Solaris 10 SPARC.
    I can connect to my SAP DB 7.3.0.35 using Database Manager 7.4.3.23 as superdba. Now I'm trying to use the dbmcli.
    I go to the server and pop open a cmd prompt and try it via dbmcli:
    dbmcli -d sdb -u superdba,<password>
    And I get a Windows dialog box that says
    This application has failed to start because SapNi.dll was not found. Re-installing the application may fix this problem. 
    Hello,
    actually, the SUPERDBA user only has ONE valid password. Although he is able to perform admin tasks and to execute SQL statements, there are not two passwords for this user!
    So if you are able to connect with that user with dbmcli and not with sqlcli or loadercli, there seems to be something wrong with your system/users. Maybe the user called SUPERDBA on your system is not really the SYSDBA but a 'normal' dbm user.
    When you connect with that user with dbmcli, please execute the following commands:
    sql_execute select user from dual
    sql_execute select SYSDBA from dual
    sql_execute select * from users
    Can you also connect with user control with dbmcli? You might want to check the default password (control).
    Regarding the ni.dll problem: If I understand that correctly, you installed Database Studio locally on your PC. Did you also install any othe MaxDB software on that server? When you try to use dbmcli to connect to a remote database, you'll have to specify the -n <hostname> option. Or did you get that dll error on the database server itself?
    Database Studio cannot be used to administer databases of version 7.3. You'll have to use DBMGUI or dbmcli for that.
    Best regards, Melanie
    Hi Melanie, Thanks for the response.
    I cannot use dbmcli at the moment. I get the Windows dialog box saying
    This application has failed to start because SapNi.dll was not found. Re-installing the application may fix this problem.
    I am using dmcli on the Windows 2003 Server with my SAP DB 7.3 installed. Here is the version of dbmcli that I'm using.
    C:\sapdb\SDB\db\bin>dbmcli -V
    OK
    version,os,dbroot,logon,code,swap
    "7.6.06","WIN32","C:\Program Files\sdb\7606",True,ASCII,2
    I'm going to try to do what the error message tells me and uninstall and re-install my DB management applications.
    Thanks,
    Rich

    Server Utilities           c:/sapdb/programs                             7.7.06.09     32 bit    valid
    DB Analyzer                c:/sapdb/programs                             7.6.06.03     32 bit    valid
    PCR 7300                   c:/sapdb/programs                             7.3.00.35               valid
    PCR 7301                   c:/sapdb/programs                             7.3.01.09               valid
    PCR 7104                   c:/sapdb/programs                             7.1.04.43               valid
    MaxDB PHP Driver           c:/sapdb/programs                             7.6.06.03     32 bit    valid
    PCR 7240                   c:/sapdb/programs                             7.2.04.17               valid
    Synchronization Manager    c:/sapdb/programs                             7.6.06.03               valid
    Base                       c:/sapdb/programs                             7.7.06.09     32 bit    valid
    Redist Python              c:/sapdb/programs                             7.6.06.03     32 bit    valid
    JDBC                       c:/sapdb/programs                             7.6.05.06               valid
    Messages                   c:/sapdb/programs                             MSG 0.8215              valid
    ODBC                       c:/sapdb/programs                             7.6.06.03     32 bit    valid
    Database Kernel            c:/program files/sdb/7606                     7.6.06.03     32 bit    valid
    Database Kernel            c:/sapdb/programs/databasestudio/utilities    7.7.6.9                 valid
    Database Kernel            c:/sapdb/sdb/db                               7.3.00.35     32 bit    valid
    Loader                     c:/sapdb/programs                             7.6.06.03     32 bit    valid
    SQLDBC                     c:/sapdb/programs                             7.6.06.03     32 bit    valid
    PCR 7250                   c:/sapdb/programs                             7.2.05.24               valid
    xinstinfo
    IndepData           : C:\sapdb\data
    IndepPrograms       : C:\sapdb\programs
    dbmcli -s dbm_version
    OK
    VERSION    = 7.7.06
    BUILD      = DBMServer 7.7.06   Build 009-123-202-944
    OS         = WIN32
    INSTROOT   =
    LOGON      = True
    CODE       = UTF8
    SWAP       = full
    UNICODE    = YES
    INSTANCE   = (unknown)
    SYSNAME    = Windows Server 2003 family
    MASKING    = YES
    REPLYTREATMENT = none,zlib,auto
    SDBDBM_IPCLOCATION = C:\sapdb\data\wrk
    Edited by: Rich Evans on Jun 16, 2009 4:13 PM

Maybe you are looking for

  • Acrobat shows as "up to date" on a fresh Yosemite install. Can't uninstall or install Acrobat.

    Yesterday I installed Yosemite on a brand new MacBook Pro. Today I installed Adobe CC. When the CC application launched for the first time it showed Acrobat XI Pro as being installed and "up to date". I did NOT install Acrobat, but I want to. The pro

  • Insert error SQLException: Invalid argument(s) in call:

    The following exception is produced because resultSet.next() was called on an empty resultSet why ?? Driver = Oracle 8.1.7 thin (current version 8/30/01) for NT. Thanks try      m_resultSet = m_statement.executeQuery("SELECT CODE_DECODE.* FROM CODE_D

  • Adobee Muse crashes everytime I attempt to export or publish

    Every time I attempt to publish, export, or preview my Muse site, the program crashes. It's a very small file size right now (2,432 KB) and I'm using the latest version of Adobe Muse CC 2014. I'm working with Adobe Muse 2014 for PC. I can preview, bu

  • ASM Rebalancing ?

    Hi, I'm about to add a new disk/diskgroup into an existing ASM group informing Oracle not to rebalance it now. I'm planning to rebalance manually later on. What would happend if a new files gets created in the newly added disk/diskgroup where rebalan

  • 0FIGL_V10 Error

    Hi, I executed the query 0FIGL_V10_Q0001 on 0FIGL_V10 virtual Infocube, it is giving error characteristic financial statement Item not available in infoprovider. When I checked the objects of virtual cube maintenance the info object is there. Th erro


HashFlare