EWA" Dates for this session are overdue "

Dear All,
Im now configuring EWA report but i always got Red Flag for the satillite system said that  "Dates for this session are overdue"  and there is no two bottle apear.  please help me..
Thanks so much.

Hi,
That error is because your managed system is not sending the required EWA data to your SolMan for processing.
Please check the following to make sure all steps are correct for EWA processing:
Check RFCs in Solution Manager to your system that the EWA is for.
Also check the Back RFC to SolMan in the managed system.
Also check in the managed system, transaction SDCCN and make sure the maintenance package is running and scheduled periodically!
Finally ensure the Task Processor is active and scheduled in SolMan via transaction SDCCN > Goto > Settings > Task Processor.
Lastly check in the managed system that the RFC for the maintenance package is set to your SolMan via transaction SDCCN > Goto > Settings > Task Specific > icon next to RFC Destinations > Settings. Ensure the Back RFC to SolMan is set as the master.
To do this, go to SMSY in SolMan > Environment > SolMan Operations > Administration SDCCN and ensure your managed system is there and SolMan is the master.
You may even have outstanding jobs for this system in SDCCN of SolMan which you can run to process the EWA data if you do not have a periodic Maintenance Package correctly running in SolMan.
All of these checks will solve your issue and make sure EWA is working.
If you find the answer, please post what the mistake was, I am curious
Regards,
-Rohan
Edited by: Rohan Parikh on Dec 9, 2009 4:42 PM

Similar Messages

  • Dates for this sessiions are overdue-Sap ealy watch report

    Hi all,
    I have too many sessions scheduled for EWA one if my system in Landscape wit Red flags & i wanted to remove them as they are with very old Dates.I couldn't  manage to find any option pls advice me on that.
    How can i remove OLD EWA  with RED flags

    Hi val,
    navigated as u said .,
    Once i press delete button i could be able to delete only the session where my early watch report is generated.
    But as i wanted to delete the sessions which are in past date with red flag
    for example if i click on red flag i get the following data
    The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
    Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
    Typical sources of errors are:
    The RFC connection for the SAP Solution Manager system is not working.
    The 'Task Processor' background job, which collects the session data, has been changed.
    Problems arose while data was being collected (see the detail log for the task that collects the session data).
    A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
    Session number: 5550000000878
    Back    Call Service Data Control Center
    As i dont require this over due seesions How can i delete them

  • Error message 'The Outlook data file (.pst) failed to load for this session.' when adding PST in Outlook addin

    Hi All,
    I have an Outlook (2003-2013) addin developed using C# (NOT VSTO).
    A new client (using the desktop client for Outlook 365) has got a COMException error message stating 'The Outlook data file (.pst) failed to load for this session.' at the code line where I add the PST store (using Microsoft.Office.Interop.Outlook.NameSpaceClass.AddStoreEx).
    I have never come across this error message before and there is barely any mention of this message on any forums. The only question I could find regarding this has been asked mid 2014 and hasn't been answered.
    I'm fairly sure this is not related to either DisablePST or PSTDisableGrow registry key settings as I check fore their existance and notify the user separately.
    Could anyone help me out on how to resolve this? I do not know where to begin even.
    Thanks!!
    Cheers!

    Hi Eugene,
    Thanks for the reply.
    I pass the location that the PST is to be created (as a string), and the OlStoreType.olStoreUnicode constant.
    The client is using a network location to store the PST file (even though we advised them not to) - leading to many corrupt PST files (that they are apparently happy to live with), but this is the first time we came across this message.
    I would assume the problem is with that file, as no other clients are having any issue like this.
    Have you come across this error message? Do you know what sort of scenario could be responsible for it?
    Or would I have to file it under "random problems generated by network PSTs"? :P
    Cheers!

  • Failure to install SQL Server 2012 SP1 CU8/9 with a "Failed to retrieve data for this request." error

    Hi all,
    Has anyone come across SQL Server 2012 SP1 CU8/9 failing to install with a “Failed to retrieve data for this request.” error.
    The error is too generic for a useful search on web, for me at least anyway.
    Had no problems patching a whole bunch of other servers in the same environment.
    I’m no good at reading these error logs. For some reason the primary replica is referenced in the detailed log???
    The CU8/9 patch has been run by both Domain Admins and local Admin with no luck.
    We are trying to patch a secondary failover replica. (SharePoint 2013 is installed on this server.)
    This is from the summary log:
    Overall summary:
      Final   result:                    The patch installer has failed to update the shared features. To determine   the reason for failure,
    review the log files.
      Exit code   (Decimal):             -2146233088
      Exit facility   code:            19
      Exit error   code:                 5376
      Exit   message:                    Failed to retrieve data for this request.
      Start   time:                      2014-04-10 11:51:11
      End   time:                        2014-04-10 11:51:49
      Requested   action:                Patch
      Exception help link:            
    http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3412.0&EvtType=0xB2652E58%400xDC80C325&EvtType=0xB2652E58%400xDC80C325
    Machine Properties:
      Machine   name:                    VMSPDB2
      Machine processor   count:       4
      OS version:                      Future Windows Version
      OS service   pack:                
      OS   region:                       Australia
      OS   language:                     English (United States)
      OS   architecture:                 x64
      Process   architecture:          64 Bit
      OS   clustered:                    Yes
    Product features discovered:
      Product                Instance               Instance ID                     
    Feature                                    Language              
    Edition                Version         Clustered  Configured
      SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Database
    Engine Services                   1033                   Enterprise Edition  
    11.1.3000.0     No           Yes      
      SQL Server   2012        MSSQLSERVER          MSSQL11.MSSQLSERVER              SQL Server  
    Replication                     1033                   Enterprise
    Edition     11.1.3000.0       No           Yes      
      SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Full-Text
    and Semantic Extractions for Search   1033                   Enterprise Edition   11.1.3000.0       No        
    Yes        
      SQL Server   2012        MSSQLSERVER            MSSQL11.MSSQLSERVER              Data
    Quality Services                      1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Management   Tools -   Basic                   1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Management Tools - Complete                1033                   Enterprise Edition  
    11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Client Tools Connectivity                  1033                   Enterprise Edition  
    11.1.3000.0     No           Yes      
      SQL Server   2012                                                           
    SQL Server Data   Tools                      1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
      SQL Server   2012                                                           
    Integration   Services                       1033                  
    Enterprise Edition   11.1.3000.0       No           Yes      
    Package properties:
        Description:                     Microsoft SQL Server 2012 Service Pack 1
        ProductName:                     SQL Server 2012
        Type:                            RTM
        Version:                         11
        SPLevel:                         1
      KBArticle:                       KB2931078
        KBArticleHyperlink:             
    http://support.microsoft.com/?kbid=2931078
        PatchType:                       QFE
        AssociatedHotfixBuild:         0
        Platform:                        x64
        PatchLevel:                      11.1.3412.0
        ProductVersion:                  11.1.3000.0
        GDRReservedRange:                10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
        PackageName:                     SQLServer2012-KB2931078-x64.exe
      Installation   location:           e:\90a192411a98d1f6dc\x64\setup\
    User Input Settings:
        ACTION:                          Patch
        ALLINSTANCES:                    false
        CLUSTERPASSIVE:                  false
        CONFIGURATIONFILE:              
      ENU:                             false
        HELP:                            false
      IACCEPTSQLSERVERLICENSETERMS:    false
        INDICATEPROGRESS:                false
        INSTANCEID:                      <empty>
        INSTANCENAME:                    <empty>
        QUIET:                           false
        QUIETSIMPLE:                     false
        SQMREPORTING:                    false
        UIMODE:                          Normal
        X86:                             false
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report   file:                 The rule result report file is not available.
    Exception summary:
    The following is an exception stack listing   the exceptions in outermost to innermost order
    Inner exceptions are being indented
    Exception type:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
        Message:
            Failed to retrieve data for   this request.
        HResult : 0x80131500
        Data:
          HelpLink.ProdName   = Microsoft SQL Server
            HelpLink.BaseHelpUrl =
    http://go.microsoft.com/fwlink
            HelpLink.LinkId = 20476
            HelpLink.EvtType =
    0xB2652E58@0xDC80C325
          DisableWatson   = true
        Stack:
            at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
            at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath, String   clusterDiscoveryDocRootPath)
            at   Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String   actionId)
            at   Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId,   TextWriter errorStream)
            at   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter   statusStream, ISequencedAction actionToRun, ServiceContainer context)
        Inner exception type:   System.ComponentModel.Win32Exception
            Message:
                    Not   all privileges or groups referenced are assigned to the caller.
            HResult : 0x80004005
            Error : 1300
              Stack:
                    at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
                      at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
                      at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey
    key)
                      at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey
    machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
                      at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView,
    String regPath, RegistryAccess   registryAccess)
                      at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
                      at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
                      at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
                      at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    And the tail of the detailed log:
    (01) 2014-04-10 11:51:29 Slp: Completed Action:   InitializeMsiExtension, returned True
    (01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:30 Slp: Running Action:   AddPackageModifierSourcesAction
    (01) 2014-04-10 11:51:30 Slp: Completed Action:   AddPackageModifierSourcesAction, returned True
    (01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:30 Slp: Running Action:   InitializeConfigAction
    (01) 2014-04-10 11:51:30 Slp: Completed Action:   InitializeConfigAction, returned True
    (01) 2014-04-10 11:51:30 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:30 Slp: Running Action:   RunRemoteDiscoveryAction
    (01) 2014-04-10 11:51:31 Slp: Running discovery on local   machine
    (01) 2014-04-10 11:51:33 Slp: Discovery on local machine   is complete
    (01) 2014-04-10 11:51:33 Slp: Running discovery on remote   machine: VMSPDB1
    (01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
    (01) 2014-04-10 11:51:36 Slp:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to   retrieve data for this request. ---> System.ComponentModel.Win32Exception:   Not all privileges or groups referenced are
    assigned to the caller.
      at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
       at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
       at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey key)
       at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess
    registryAccess,   Boolean& alreadyCached)
       at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
       at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
       at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
       at   Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
       at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request   req, Object ci)
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
       --- End of inner exception stack trace ---
       at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
       at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath, String   clusterDiscoveryDocRootPath)
    (01) 2014-04-10 11:51:36 Slp: Error: Action   "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction"   threw an exception during execution.
    (01) 2014-04-10 11:51:36 Slp:   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed   to retrieve data for this request. --->   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to  
    retrieve data for this request. ---> System.ComponentModel.Win32Exception:   Not all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean   enable)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer   ctx, String machineName, SqlRegistryKey key)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx, String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView
    regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer   ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String   machineName, RegistryView regView)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:36 Slp:    at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:36 Slp:    --- End of   inner exception stack trace ---
    (01) 2014-04-10 11:51:39 Slp: Received request to add the   following file to Watson reporting:   C:\Users\HS2\AppData\Local\Temp\tmp6614.tmp
    (01)   2014-04-10 11:51:39 Slp: The following is an exception stack listing the   exceptions in outermost to innermost order
    (01)   2014-04-10 11:51:39 Slp: Inner exceptions are being indented
    (01)   2014-04-10 11:51:39 Slp:
    (01)   2014-04-10 11:51:39 Slp: Exception type:   Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
    (01)   2014-04-10 11:51:39 Slp:     Message:
    (01)   2014-04-10 11:51:39 Slp:           Failed to retrieve data for this request.
    (01)   2014-04-10 11:51:39 Slp:     HResult : 0x80131500
    (01) 2014-04-10 11:51:39 Slp:       Data:
    (01) 2014-04-10 11:51:39   Slp:       HelpLink.ProdName = Microsoft SQL   Server
    (01) 2014-04-10 11:51:39   Slp:       HelpLink.BaseHelpUrl =
    http://go.microsoft.com/fwlink
    (01) 2014-04-10 11:51:39   Slp:       HelpLink.LinkId = 20476
    (01) 2014-04-10 11:51:39 Slp:       Stack:
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable   dt, Int32 level)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String   machineName)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String   machineName)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1   machineNames, String discoveryDocRootPath,
    String   clusterDiscoveryDocRootPath)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String   actionId)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId,   TextWriter errorStream)
    (01) 2014-04-10 11:51:39   Slp:         at   Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter   statusStream, ISequencedAction actionToRun, ServiceContainer
    context)
    (01)   2014-04-10 11:51:39 Slp:     Inner exception type:   System.ComponentModel.Win32Exception
    (01)   2014-04-10 11:51:39 Slp:           Message:
    (01)   2014-04-10 11:51:39   Slp:                   Not all privileges or groups referenced are assigned to the caller.
    (01)   2014-04-10 11:51:39   Slp:                  
    (01)   2014-04-10 11:51:39 Slp:           HResult : 0x80004005
    (01)   2014-04-10 11:51:39 Slp:           Error : 1300
    (01) 2014-04-10 11:51:39   Slp:         Stack:
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean  
    enable)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String   privilege)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer  
    ctx, String machineName, SqlRegistryKey key)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer   ctx,
    String machineName, SqlRegistryKey machineKey, String registryPath,   RegistryView regView, String regPath, RegistryAccess registryAccess,   Boolean& alreadyCached)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer  
    ctx, String machineName, RegistryView regView, String regPath, RegistryAccess   registryAccess)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String  
    machineName, RegistryView regView)
    (01) 2014-04-10 11:51:39   Slp:                   at   Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String   machineName)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req,   Object ci)
    (01) 2014-04-10 11:51:39   Slp:                   at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:39 Slp:                   at   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object   connectionInfo, Request request)
    (01) 2014-04-10 11:51:44 Slp: Watson Bucket 2
     Original Parameter Values
    (01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server  
    2012@RTM@KB2931078
    (01) 2014-04-10 11:51:44 Slp: Parameter 1 :   Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process
    (01) 2014-04-10 11:51:44 Slp: Parameter 2 :   Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege
    (01) 2014-04-10 11:51:44 Slp: Parameter 3 :
    Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException@-2146233088  
    (01) 2014-04-10 11:51:44 Slp: Parameter 4 :
    System.ComponentModel.Win32Exception@-2147467259  
    (01) 2014-04-10 11:51:44 Slp: Parameter 5 :   RunRemoteDiscoveryAction
    (01) 2014-04-10 11:51:44 Slp: Parameter 8 : 1300
    (01) 2014-04-10 11:51:44 Slp:
     Final Parameter Values
    (01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server  
    2012@RTM@KB2931078
    (01) 2014-04-10 11:51:44 Slp: Parameter 1 : 0x6785B09D
    (01) 2014-04-10 11:51:44 Slp: Parameter 2 : 0xB2652E58
    (01) 2014-04-10 11:51:44 Slp: Parameter 3 : 0x74E34741
    (01) 2014-04-10 11:51:44 Slp: Parameter 4 : 0xDC80C325
    (01) 2014-04-10 11:51:44 Slp: Parameter 5 :   RunRemoteDiscoveryAction
    (01) 2014-04-10 11:51:44 Slp: Parameter 8 : 0xA05EFA62
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Microsoft SQL  
    Server.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Uninstall to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL   Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft  
    SQL Server.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key Uninstall to file C:\Program Files\Microsoft SQL   Server\110\Setup   Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write   hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL   Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
    (01) 2014-04-10 11:51:45 Slp: The following exception   occurred while preparing registry logs during Watson failure processing: Not   all privileges or groups referenced are assigned to the caller.
    (01) 2014-04-10 11:51:46 Slp: Failed to retrieve data for   this request.
    (01) 2014-04-10 11:51:46 Slp: Watson bucket for exception   based failure has been created
    (01) 2014-04-10 11:51:46 Slp: Sco: Attempting to create   base registry key HKEY_LOCAL_MACHINE, machine
    (01) 2014-04-10 11:51:46 Slp: Sco: Attempting to open   registry subkey Software\Microsoft\Microsoft SQL Server\110
    (01) 2014-04-10 11:51:46 Slp: Sco: Attempting to get   registry value EnableErrorReporting
    (01) 2014-04-10 11:51:46 Slp: WER: Successfully read app   consent from registry Software\Microsoft\Microsoft SQL   Server\110\EnableErrorReporting=0.
    (01) 2014-04-10 11:51:46 Slp: WER: Application level   consent value '0' was mapped to consent status 'WerConsentDenied'
    (01) 2014-04-10 11:51:46 Slp: WER: Result of the   submission:: 'WerDisabled'
    (01) 2014-04-10 11:51:46 Slp: WER: Submitted 1 of 1   failures to the Watson data repository
    (01) 2014-04-10 11:51:46 Slp: Sco: File   'C:\Windows\system32\Cluster.exe' does not exist
    (01) 2014-04-10 11:51:46 Slp: Failed to collect cluster   logs, cannot find Cluster.exe under system directory.
    (01) 2014-04-10 11:51:46 Slp: Dumping final cluster state.
    (01) 2014-04-10 11:51:49 Slp: Completed dumping final   cluster state.
    (01) 2014-04-10 11:51:51 Slp:
    (01) 2014-04-10 11:51:51 Slp:   ----------------------------------------------------------------------
    (01) 2014-04-10 11:51:51 Slp:
    (01)   2014-04-10 11:51:51 Slp: Error result: -2146233088
    (01)   2014-04-10 11:51:51 Slp: Result facility code: 19
    (01)   2014-04-10 11:51:51 Slp: Result error code: 5376
    (01)   2014-04-10 11:51:51 Slp: SQM Service: Sqm does not have active session.

    Hello SQL Ranger,
    Thanks for posting the detailed log. I dont have exact solution for this but I can give you some hint what could be reason patch has failed below message points to fact that there is some issue with account which is used to install CU patch.Have alook at
    below log.It says that when patch was trying to get details from other node in cluster it was not able to.
    01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
    (01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
    (01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
    (01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
    IMO I strongly feel it is issue with the account. Microsoft has also documented about this for SQL Server 2008 .Have a look at following links
    http://support.microsoft.com/default.aspx?scid=kb;en-US;2000257
    Please also assign privilege mentioned in below link
    http://www.bradg.co.za/?p=12
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Unable to install SQL Server Express 2008 R2 - Errors "Failed to retrieve data for this request"

    As domain admin I am attempting to install "SQL Server 2008 R2 with SP2" but it keeps failing with "Failed to retrieve data for this request".
    The installation never actually starts, it errors before then.
    It displays the same error even if I run the System Configuration Checker.
    The summary.txt for the install displays the following text:
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -1554760125
      Exit facility code:            852
      Exit error code:               15939
      Exit message:                  Failed to retrieve data for this request.
      Start time:                    2014-08-15 16:49:52
      End time:                      2014-08-15 16:50:06
      Requested action:              RunRules
    Machine Properties:
      Machine name:                  servername
      Machine processor count:       8
      OS version:                    Windows Server 2008 R2
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  Yes
    Product features discovered:
      Product              Instance             Instance ID                   
    Feature                                  Language            
    Edition              Version         Clustered
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL Server 2008 R2
      Type:                          RTM
      Version:                       10
      SPLevel:                       1
      Installation location:         c:\84122ef5b6d9cdcd3b2ac48cec\x64\setup\
      Installation edition:          EXPRESS
    User Input Settings:
      ACTION:                        RunRules
      CONFIGURATIONFILE:             
      ENU:                           True
      FARMACCOUNT:                   <empty>
      FARMADMINPORT:                 0
      FARMPASSWORD:                  *****
      FEATURES:                      
      HELP:                          False
      INDICATEPROGRESS:              False
      INSTANCENAME:                  <empty>
      PASSPHRASE:                    *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      RULES:                         GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2008InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck
      UIMODE:                        AutoAdvance
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140815_164944\ConfigurationFile.ini
    Detailed results:
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report file:               The rule result report file is not available.
    Exception summary:
    The following is an exception stack listing the exceptions in outermost to innermost order
    Inner exceptions are being indented
    Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
        Message:
            Failed to retrieve data for this request.
        Data:
          HelpLink.ProdName = Microsoft SQL Server
          HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
          HelpLink.LinkId = 20476
          DisableWatson = true
        Stack:
            at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
            at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
            at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
            at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
            at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
            at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
            at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
        Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
            Message:
                    The network path was not found.
            Data:
              WatsonData = [email protected]rror
            Stack:
                    at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.CreateBaseKey(ServiceContainer ctx, String machineName, IntPtr hKey, String keyName, RegistryAccess access, RegistryView
    view)
                    at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocalMachine(ServiceContainer ctx, String machineName, RegistryAccess access, RegistryView view)
                    at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
                    at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
                    at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
                    at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
                    at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
                    at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)

        Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
            Message:
                    The network path was not found.
            Data:
              WatsonData = [email protected]rror
    Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
    Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
    of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you  remove all SQL Server components from add remove program
    I strongly recommend you to have a good look at below thread
    http://support.microsoft.com/kb/2000257/en-us
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • What this mean? "could not rasterize because the pixel data for this layer is not"

    I've taken a color picture and made it black and white by doing the following: Layer>New Adjustment Layer>Hue/Saturation. I brought the saturation down to -100.  The pencil is selected and my foreground color is black.
    When I try to select the flowers in my picture to bring out their color (within the black and white image), I get a circle with a black line thru it and the error message "could not rasterize because the pixel data for this layer is not directly editable".  The steps I followed are working for most of my team but some of us are getting this error message.
    Any idea why and/or how to fix it?

    Ah, thank you!  I didn't have the mask selected. So once I did select it, the color came thru like magic. 

  • I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, i get message "The Configuration data for this product is Corrupt".

    I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI"  I
    am so disgusted,please help!!!

    Hey madnest,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Issues installing iTunes or QuickTime for Windows
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Data of different session are not getting refreshed.

    We used select one choice and it is bind to the iterator. Data of different session are not getting reflected.
    Problem Scenario : Two browsers are open with same screen . In browser-1, I am adding new item which display on drop down of same screen. But drop down of browser-2 is not displaying the new added value.
    Please let me know how to refresh the data of browser-2 if I added data on different session.
    //JSFF entry
    <af:selectOneChoice binding="#{backingBeanScope.Product.ICTCSTName}"
    id="iCTCSTName" simple="true"
    label="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.label}"
    required="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.hints.mandatory}"
    value="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.inputValue}"
    autoSubmit="true">
    <f:selectItems value="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.items}"
    binding="#{backingBeanScope.Product.si2}"
    id="si2"/>
    </af:selectOneChoice>
    //Pagedef entry
    <list IterBinding="tpCrudeSuperTypeFindAllPopulatedCTIterator"
    ListOperMode="navigation"
    ListIter="tpCrudeSuperTypeFindAllPopulatedCTIterator"
    id="tpCrudeSuperTypeFindAllPopulatedCT" DTSupportsMRU="true">
    <AttrNames>
    <Item Value="superTypeName"/>
    </AttrNames>
    </list>

    Are you sure backingBeanScope is the correct scope for your scenario?
    Session scope sound more appropriate to me.
    binding="#{backingBeanScope.Product.si2}"

  • Java 1.4.2_03 Windows: The configuration data for this product is corrupt.

    Trying to install j2SE 1.4.2_03 JRE on a Windows system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
    The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
    "The configuration data for this product is corrupt. Contact your support personnel".
    The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
    The error code is 1610: ERROR_BAD_CONFIGURATION.
    Reinstalling Windows didn't fix the problem.
    Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
    Other versions of Java installers fail the same way and show the same message.
    I don't know how to contact "my support personnel" nor who they are.
    I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.

    Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
    A new downloaded copy of the file or other versions of Java failed to install with the same error message.
    I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
    I'm still not sure this will fix the problem.
    Thanks for replying.

  • Java 1.4.2_03 WindowsXP The configuration data for this product is corrupt.

    Trying to install j2SE 1.4.2_03 JRE on a Windows XP system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
    The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
    "The configuration data for this product is corrupt. Contact your support personnel".
    The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
    The error code is 1610: ERROR_BAD_CONFIGURATION.
    Reinstalling Windows didn't fix the problem.
    Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
    Other versions of Java installers fail the same way and show the same message.
    I don't know how to contact "my support personnel" nor who they are.
    I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.

    Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
    A new downloaded copy of the file or other versions of Java failed to install with the same error message.
    I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
    I'm still not sure this will fix the problem.
    Thanks for replying.

  • #554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##

    Hi,
    This is my first post here. 
    My exchange server of late is facing a peculiar problem. I get the error message that I have posted below when sending mails to any outside domain. However when I restart the server the mails can be resend to the address without any issue. After a certain
    time again the issue pops up upon which I am forced to restart the server again. I am running 2007 Exchange on Windows 2003.
    Generating server: name.mydomain.com
    [email protected]
    #554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
    [email protected]
    #554 5.4.4 SMTPSEND.DNS.MxLoopback; DNS records for this domain are configured in a loop ##
    Original message headers:
    Received: from name.mydomain.com ([1xx.xxx.xxx.xx5]) by MHDMAILS.mouwasat.com
     ([1xx.xxx.xxx.xx5]) with mapi; Wed, 19 Oct 2011 08:56:29 +0300
    From:  <[email protected]>
    To: <[email protected]>
    CC: "Al Alami,Tareq" <[email protected]>
    Date: Wed, 19 Oct 2011 08:56:27 +0300
    Subject: RE:   
    Thread-Topic:   
    Thread-Index: AcyAQ5tu8z9CvBfdT5+1pcGQkk6x0AIuwczAAAGZjeABQyW5sAADeeJQAAETNDA=
    Message-ID: <[email protected]>
    References: <[email protected]com>
     <[email protected]com>
    Accept-Language: en-US
    Content-Language: en-US
    X-MS-Has-Attach: yes
    X-MS-TNEF-Correlator:
    acceptlanguage: en-US
    Content-Type: multipart/related;
                boundary="_004_EEC8FA6B3B286A4E90D709FECDF51AA06C0588CA11namedomain_";
                type="multipart/alternative"
    MIME-Version: 1.0

    On Sun, 23 Oct 2011 15:05:15 +0000, Jobin Jacob wrote:
    >
    >
    >Even af
    >
    >ter removing my domain from the send connector I continue to receive the error. I would like to say I do have a firewall, Cyberoam. However, it was the same configuration till now in the firewall. I did try Mx lookup and found the following.
    >
    >Could there be any other solution to this issue ?
    Sure, but it's necessary to ask a lot of questions since none of us
    know how your organization is set up.
    I see you also have "Use the External DNS Lookup settings on the
    transport server" box checked. How have you configured the "External
    DNS Lookups" on the HT server's property page? Is there any good
    reason why you aren't just using your internal DNS servers? If the
    internal DNS servers are configured to resolve (or forward) queries
    for "external" domains then there's no reason to use that checkbox. In
    most cases checking that box is a mistake.
    http://technet.microsoft.com/en-us/library/aa997166(EXCHG.80).aspx
    The behavior you describe (it works for a while and then fails;
    restarting the server returns it to a working state) sure sounds like
    some sort of DNS problem.
    Rich Matheisen
    MCSE+I, Exchange MVP
    --- Rich Matheisen MCSE+I, Exchange MVP

  • Management Portal unavailable - "cannot load management data for this resource type"

    Noticing that with the exception of virtual machines, every resource type in the (non preview) Azure Management Portal is showing a sad pink icon and the help text "cannot load management data for this resource type."
    So that's a near total portal outage for us. Anybody else experiencing this?
    I've attempted to open a ticket with developer support but I'm not sure if that's the right channel.
    Brian

    Hi Brian,
    Thanks for your posting!
    From Dashboard shown (http://azure.microsoft.com/en-us/status/#history), Currently, the Azure portal works fine in every regions.
    So I suggest you can submit a tick via this channel:
    http://www.windowsazure.com/en-us/support/contact/
    Also, you can click your right-top account name and select the "Microsoft Support" item to create free ticket.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Programs that require a network connection won't work because there is no virtual IP address available for this session.

    Programs that require a network connection won't work because there is no virtual IP address available for this session.  Per application IP virtualization is enabled.
    There are in fact available IP address's within the dhcp scope.  Before I dig to deep into root cause.. Could the problem be RDS CAL licensing running out, or isn't that not a symptom of my error message?

    Hi,
    Thank you for posting in Windows Server Forum.
    As per my research, there is no any issue related to RDS CAL licensing. Prior to the issue which you are facing, there are some basic setting which need to configure.
    Application Compatibility – Turn on Remote Desktop IP virtualization
    Some applications require a unique IP address, which is by default logically not the case if the application is running on RD Session Host. To solve this issue, Remote Desktop IP Virtualization is introduced. With this setting you enable the IP virtualization
    feature. When enabling this setting you need to specify if the virtual IP is provided per session or per program. When using per program you need to define the executable to which an IP address should be configured. Desktop IP virtualization also needs the
    configuration of the next setting.
    Application Compatibility – Select the network adapter to be used for Remote Desktop IP Virtualization
    When you need to use Remote Desktop IP virtualization configuring this setting is mandatory. You need to specify the IP address of the Network Interface Card which should be used for this feature. Besides the IP address you need also to specify the network
    mask using the slash notation, for example 192.168.77.201/24.
    Application Compatibility – Do not use Remote Desktop Session Host server IP address when virtual IP address is not available
    More information:
    Microsoft RDS Policies explained (Part 2)
    http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/microsoft-rds-policies-explained-part2.html
    Configuring Remote Desktop IP Virtualization II
    http://blogs.msdn.com/b/rds/archive/2009/07/15/configuring-remote-desktop-ip-virtualization-ii.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly.  Is there a fix for this or are they even working on a fix.

    Recent iOS update has made my iPad 2 unusable. The screen locks up. It's very laggy and web pages do not load correctly.  Is there a fix for this or are they even working on a fix.

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • No download for this session. how to delete this message

    want to download movies with download helper but all i get is this message "no download for this sessions"

    See the Add-ons page of the Download Helper extension.
    *https://addons.mozilla.org/firefox/addon/video-downloadhelper/
    <blockquote><pre>
    We are aware of downloading issues when using Firefox 36.
    We have been working for months on a 100% new version which works on Firefox 36+ (it does not work on Firefox 35 and below) and we just released a first test version. If you want to test this version and provide feedback on it, please follow this link.</pre></blockquote>
    *https://groups.google.com/forum/#!forum/video-downloadhelper-5

Maybe you are looking for