EWA report for non-abap systems

Hi Gurus,
Good day.
I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
It is both? Which one?
It would be also great if you can provide me links/documents in relation to my queries.
Please do note that the current version of solman system is 7.1
Thanks in advance for the help
Virgilio

Hi Virgilio,
To generate an EWA report for Java stack system,
you need to do following:
1. install smd agent (diagnostics agent) on Java stack system
you can install this agent standalone, details see note 1234384.
The installation Guide is also attached in note 1234384.
2. finish Initial Config and Basic Configuration in solman_setup for
solman system, the setting about Enterprise Manager is also included
in these configurations, please ensure EM is running properly.
3. start managed system configuration for the EP system in solman_setup
after selecting the system type 'Java', please finish all steps as
suggested in which step. The Step 'Wily Introscope Configuration' is to
install Introscope Agent which is used for Java stack system. More infor
please read the installation Guide of Enterprise Manager and note
797147.
4. You should be able to see data in Wily Introscope and Workload
analysis via
Root Cause Analysis->End-to-End Analysis->select the system->Workload
Analysis
5. If the EP system is added in a solution, the EWA task for this system
should be shown up in solman's SDCCN.
Also check note: 976054"
Thanks
Regards,
Vikram

Similar Messages

  • EWA reports for non abap systems

    Hello gurus,
    I am facing a problem with configuration of EWA reports for SAP NW Portal.
    I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
    So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
    I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
    I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
    >>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
    In the SMD i can see just the abap systems  for which the EWA are being already generated.
    (i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
    Do you have any idea, what i have done wrong?
    My solution manager is running on Sap NW 7.0, SPS16,
    Sattelite system , EP  SPS 19
    Thank you very much for your points!!

    Hello Jagan,
    I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
    And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
    Do you have any idea?
    Thanks,
    Best regards
    Slavomir

  • How to setup EWA for non-ABAP system with SM 4.0 ?

    Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
    It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
    I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
    Thanks.

    Hi Andrew,
    we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
    This is the old, available standard solution. At the moment we develop it also for java stand alone.
    I think it will be available with the new ST-SER in autumn
    Regards,
    uDo

  • EWA for non-ABAP systems

    Hi,
    We are planing to implement EWA for Java systems. Currently EWA is active for all ABAP systems. Do we need Wily Introscope in order to setup the EWA for non-ABAP systems? Or just we can use the SMD to generate EWA reports for Java systems?
    Any idea?
    Thanks,
    Kris

    Thanks Paul
    We are on SM 7.0 EhP1. But I see following info in note 976054. It says data sources for EWA are different on 7.0 EhP1, does it mean we don't need wily from 7.0 EhP1 onwards?
    Data sources in Solution Manager Diagnostics up to SP17 used for EWA for non-ABAP components analysis are:
                          - Introscope (SAP Note 797147),
                          - Garbage Collection (SAP Note 1079125) and
                          - Portal Activity Reporting (SAP Notes 936612 to know how to activate PAR and 914791, 1075276 to configure SQL           
                            Command Console).
    Starting with Solution Manager 7.0 EHP1 (SP18) the data sources are:
                          - Solution Manager BI for performance data
                          - Configuration and Change DB(CCDB) for configuration data
    Thanks,
    Kris

  • Does Solution Manager support Service Report for non-abap?

    Does Solution Manager support Service Report for non-abap?
    We can schedule and view reports for ABAP but for all the non-ABAP such as J2EE stack (PORTAL) we can not pull out a report.
    If the answer is yes please let me know where I can get the documentation of how to setup SLA for PORTAL or non-ABAP.
    I found a document on EWA non-abap but non for SLA.

    Hi
    actually i am in task of setting up ewa for portal.
    i had already done with abap components (ewa and sla)
    i stronly believe one of the pre-requiste to get sla is EWA.
    so i think if u can setup ewa for portal then you can get sla too.
    Regards,
    Vijay.

  • EWA Report for DEV/QAS System (if possible)

    Hi Experts,
    I would like to know if it is possible to generate EWA reports for DEV/QAS Systems. I believe i have set up all the necessary RFCs for our SOLMAN to communicate with the DEV/QAS systems.
    When I try to create an EWA session in SDCCN of the DEV/QAS system, the only destination i can choose is "NONE" which is local.
    Any idea how I can send this to my SOLMAN. My SOLMAN is already configured to be the master system of my DEV/QAS system.
    Any help would be appreciated.
    Thanks.

    Hi Prince Jose,
    My problem actually is that I want to set up EWA for a DEV system. I have tested all the RFC connections to and from my SOLMAN.
    Even the RFC connection in SDCCN -> Settings .. -> RFC destination, i have 2, one SAP_OSS and my 'back' RFC to my SOLMAN and everything is working OK.
    Would you be able to give me a step by step guide on how to setup EWA. From what i know:
    1. Setup the system via SMSY (done)
    2. Generate the necessary RFCs (done and tested OK)
    3. Set SOLMAN as the master system of the satellite systems (done)
    4. Create the necessary task for EWA via SDCCN of satellite system
    Are the steps correct?
    Thanks

  • Roles for Testing ChaRMs for Non-Abap Systems

    Hi,
    Can you please suggest what all authorizations  are required for Testing the ChaRM functionality for non-abap systems
    Thanks in advance
    Regards,
    Reddi

    hi
    check the link
    Check the Configuration guide for the prerequisites.

  • EWA GCA for non-ABAP

    Dear all,
    I've setup the EWA for our SAP Enterprise portal system (non-ABAP), i've already refer to the note 976054 but along the way I am facing some issues, hope anyone here that has such experience or knowledge could share it with me.
    Here I would like to seek help on this 2 issue first:
    1. EWA GCA Task in SMD
    In SMD Scheduler, I check at the EWA GCA task, there is the error :
    Execution failed: RemoteFileNotFound See log for details. Next execution in 60 min(s).
    com.sap.sup.admin.scheduler.exception.FatalTaskExecutionException: RemoteFileNotFound See log for details
    at com.sap.sup.admin.ewa.gca.TdaTask.process(TdaTask.java:511)
    at sun.reflect.GeneratedMethodAccessor355.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:87)
    at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90)
    at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:266)
    at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:45)
    at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785)
    at java.lang.Thread.run(Thread.java:534)
    I not able to find any sapnote or forum that could solve this simillar problem.
    *2. runtime error "CREATEDATA_UNKNOWN_TYPE" in ST22*_
    Short text
        CREATE DATA: The specified type "/BI0/V0SMD_PE2H2" is no valid data type.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLSMD_FUNC" had to be terminated
        come across a statement that unfortunately cannot be executed
    please advise me, as I do not setup any BI client (in solution manager), or using any BI system. How should I correct the error? is BI is a must (either BI client or external BI system) ?
    the BI_CONT is 703 release SAPKIBIIP8  0008
    please help, thanks in advance!
    Edited by: Lay Peng Lee on Sep 17, 2009 3:38 AM
    Edited by: Lay Peng Lee on Sep 17, 2009 3:38 AM

    Hi Kelly,
    BI content is for the reporting purpose and forms the base of the Diagnostics.
    By default BI Content is delivered in SAP solution manager- Client 001,. you can use it. You can also have a client copy as per Standard and use it as BI client.
    You have to perform the Following activities to use it for Diagnostics:
    1) Activate the BI content and perform some Changes including manual activation.
    2) Generate some users between clients to aid the commuication between BI and your Production client.
    3) Use the BI client as a Backend BI during Diagnostics setup(SMD) and run the configuration Process.
    All the above steps forms the aprt of Initial and Basic Configutation in solution manager.
    Then you have to perform managed system setup for your component.
    Hope this helps.
    Kindly revert for any issues.
    Thanks,
    Jagan

  • Configuring EWA for non Abap System

    Hello to everybody.
    I am configuring EWA in Portal System 7.01and SOLMAN 7.01 too. It's a new installation and i have a question:
    - Which is the order to start to configure SMD?
    - Is Necessary configure the CCMSR agent?
    I configured EWA in a old system that had installed the agents, but they could not to connect to SMD Server.
    I Fixed this problem, but now I need configure the SMD since start.
    By the way, I'm new configuring EWA for Java
    Thanks.
    Esteban G.-
    Edited by: Esteban Gutierrez E. on Jan 11, 2010 8:48 PM

    Hi Sailesh
                     Here is related blog fr your issue. Hope this will help you.
    setup EWA for portal
    Thanks
    Jignesh

  • EWA on Non-ABAP System with Solution Manager EHP 1

    Hi Experts,
    We have recently updated our solution manager from SP Stack 16 to EHP1 (sp 18). we are now planning to set up EWA for non-abap components (EP 7.0). however, the only SAP note that i have been able to find is "976054 - Availability of EWA for Non ABAP components" but this is only limited up to SP 17. I have not been able to find any guides relating to EWA thru Solution Manager EHP1.
    I would greatly appreciate if anyone can refer any documents or SAP notes that would enable setting up EWA for non-abap components thru Solution Manager EHP1.
    We have also gone through the note 1332428, but we have'nt found it useful. We are still struggling to generate EWA report on Non-ABAP system.
    Looking forward to your kind help.
    Thanks and Regards,
    Sarthak Syal

    Hi Sarthak,
    Good!!
    Please do  the following:
    1) include the system in the Solution and scheduled the EWA session.Logical component should refer to the Non-ABAP System with no ABAP instance as relevant under the SID definition in SMSY-systems.
    2) Is the Non -ABAP ( assuming its java) has the Software component defined and is mentioned as relevant under the SID with the component name and type.
    3) Having said that SMD - Root cause Analysis functionality is configured-> check whether you are getting the Details for the Non-ABAP systems in the analysis Tabs of Root Cause Analysis.
    This should be good to go. Wait for the session to get completed.
    Thanks,
    Jagan

  • EWA for NON-ABAP

    Hi,
    I configured SMD in solman, installed SMD & IA agents in Java systems(portals). But not able to generate report.
    EWA setup was already done, i installed the agents  recently. Even downloaded the service xml from solman SMD and tried to generate report manually, but not able to generate it.
    In SDCCN the session log shows as follows.
             07/07/2008     04:53:59     Transfer of session data completed to destination NONE
             07/07/2008     04:53:59      > transfer completed
             07/07/2008     04:53:59      > transfer for server XXXXX completed
             07/07/2008     04:53:58     > transferring 000005 functions, 0000204676 bytes, RFC block size = 0000320000 for server bs1pa01z
             07/07/2008     04:53:58      > transfer for server XXXX started
             07/07/2008     04:53:58      > transfer data to mapped session ID 0000003416 100 destination NONE
             07/07/2008     04:53:58     Transfer of session data started to destination NONE
             07/07/2008     04:53:58     Data collection completed for session 1000000003416 EWALERT SolMan
             07/07/2008     04:52:45     Collection is for non-ABAP system <SID> 0020224025
             07/07/2008     04:52:45     Data collection started for session 1000000003416 EWALERT SolMan (non-ABAP)
             07/07/2008     04:52:45      > New data collection triggered using reference session TSKR000001012
             07/07/2008     04:52:45     Session download data requested using task 0000001887 by BATCHBASIS
    Please guide..
    On solman 4.0 SPS 15, ST-SER 700_2007_1 PATCH 1
    Edited by: Kobby bryant on Jul 8, 2008 2:59 PM
    Edited by: Kobby bryant on Jul 8, 2008 3:36 PM
    Edited by: Kobby bryant on Jul 8, 2008 10:48 PM
    Edited by: Kobby bryant on Jul 9, 2008 2:26 PM

    Hello.
    First of all, you must ensure that your solution manger has, at least, stack 13 of support package, in java and ABAP side.
    Once you hace installed your agents in solution manager, you must to  do different things in your satellite system.
    - First of all, you must get sure that you have deployed LMSERVICE in your satellite system. And you must deploy -     JmxService7.1.P5NetWeaver.ear file.
    - Secondly, you must install wily folder in  /usr/sap/ccm . Willy folder is obtained in ISAGENT71_11-20002182.SAR file.
    Into Wily folder, you must look for sap_IntroscopeAgent.profile file, and you need to modify it in order to be seen for your solution manager. To do this step, only find in this file the next item:
    introscope.agent.enterprisemanager.transport.tcp.host.DEFAULT=
    It will have value 'localhost' and you must delete 'default' and insert your solution manager host.
    - Then, you must go to the next folder opening cmd:
    \usr\sap\ccms\willy\connectors 
    There, execute the next command in order to create the necessary connector:
    java -jar CreateAutoProbeConnector.jar -jvm C:\j                2sdk1.4.2_06 -output connector.jar
    Get sure tou put your corresponding JDK
    - You must install SMD agent in your satellite host, executing sapinst that is in CDSMDTOOLS21_0-10003537.SAR file.
    - Once your agent is running  go to  \usr\sap\SMD\J98\component_analyzer  and execute the command 'gather setup' . It will open to you a new window with some warnings. Double clicking in each warning and editing node, you can insert a value in order to correct these warnings.
    - Then, you must insert different java parameters in your config tool. Parameters are the next:
    -Xbootclasspath/p:K:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.1.P11-2007-09-27/wily/connectors/AutoProbeConnector.jar;K:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.1.P11-2007-09-27/wily/Agent.jar
    -Dcom.wily.introscope.agent.agentName=<name of the agent : insert what you want>
    -Dcom.wily.introscope.agentProfile=K:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.1.P11-2007-09-27/wily/sap_IntroscopeAgent.profile
    -XX:+PrintClassHistogram
    -XX:+HeapDumpOnCtrlBreak
    - When you have done this, you must configure your system in SMSY following SAP guides and create the solution in solution_manager transaction.
    - The next step is configure the system in SMD web:
    1.- execute SMD upgrade.
    2.- Setup diagnostics system
    3.- Setup managed system
    4.- in 'Trouble shooting' insert jdbc parameters
    5.- In 'Introscope agent' you must load the parameters you configured in configtool.
    6.- At this point will be necessary to restart your satellite system.
    When you finishes all these steps you will be able to obtain EWA for java side.
    Is so difficult to do this. We have done it in several environments and we have had lots of problems, but it's possible.
    Any doubt, please, give me your mail and I'll be so glad to help you.
    Best regards.

  • EWA for non-abap not triggering with SDCCN session

    Hi
    I can manually download the session and generate EWA for java stack but its not automatically generated with SDCCN report. Its a double stack system, i am getting EWA for abap stack but not for java stack. Guide on note 976054 do not clearly mention what to do.
    Any suggestion

    I JUST got this working after months of End-to-End Diagnostics Setup ...
    You've run the SMD wizard to set up the managing system? 
    You've deployed smdagents everywhere you have a non-abap system?  Use the SR3 install .. lets you register from SLD ... works when ping of your soulution manager host hasn't a chance.
    You've deployed the wily agent?  Use the absolute latest hostagent 7.2.3 or use the binary agent
    You're running Wily Enterprise manager outside of sap
    You've run the SMD wizard to set-up you non-abap systems
    You've doubled the size of the host that runs SM/SMD 7.0
    You've run the Diagnostics Admin > Diagnostics system > self check and got the reds down to an absolute minimum?
    If the SMD wizard for the managing system had problems creating the WEBADMIN RFC,
    there is an IMG activity (Solution Manager > Configuration > Basic Settings > Earlywatch Alert > Early Watch Alert for non-abap > Check RFC connection) that says to copy RFC SOLMANDIAG as WEBADMIN.  This works where the wizard didn't.
    /Ken Chamberlain
    University of Toronto

  • Configuration of EWA reports for java systems.

    Hello,
    I am facing a problem with configuration of EWA reports for SAP NW Portal.
    I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
    So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
    I  am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
    I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
    So far, so good according to manuals but when i  want do define data collection in the SMD for Gargage Collection  (task in scheduler) i cannot see host of my portal system.
    I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been  generated.
    Am i missing something?
    Some configuration in SMD?
    My solution manager is running on Sap NW 7.0, SPS16,
    Sattelite system  NW 7.0 EP, SPS 6 (planning to SPS 19)
    Thank you for your advices!!!

    Hi Suveer,
    I did the configuration before. I forgot to mention it.
    I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
    Step BI Details
    Cannot invoke CCMSBISETUP on host localhost
    !! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
    Exceptions
    com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
    at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
    at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
    at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
    at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
    at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
    at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
    at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
    at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
    ... 37 more
    And also this one>>
    Step RFC Details
    Failed to create TCP/IP RFC on ABAP side (SM59)
    !! Exception :      Source system cannot be set to Unicode                              , error key: RFC_ERROR_SYSTEM_FAILURE
    Exceptions
    com.sap.aii.proxy.framework.core.BaseProxyException:      Source system cannot be set to Unicode                              , error key: RFC_ERROR_SYSTEM_FAILURE
    at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
    at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
    at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
    at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
    at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
    at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
    at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
    Thanks a lot for your remarks

  • EWA Reporting for NONSAP Systems

    Hi all,
    we need an EWA reporting for NONSAP systems. Is it possible to generate EWA Reports containing OS information (like CPU Utilization, Memory consumption, Filesystems ...) from the monitored systems.
    If possible , are there any "How to guides" for implementing the NONSAP system in SMSY.
    Thanks in advance for your help.
    Regards
    Anton Brehm

    Hello,
    I would refere you to SAP Note 1257308 - FAQ: Using EarlyWatch Alerts
    If you look at section 1. Products and components for whcih teh EarlyWatch Alert is Available, the answer to your question is there, and states the products under section 1.1 and the components under section 1.2.
    This should clarify the answer for you.
    Regards,
    Paul

  • OTO information not complete for non ABAP instance of system &1 in SMSY

    Hello,
    We have just applied Stack 23 and stack 24 to our Solution Manager system.  When we are executing action System Logon from  a ticket we are getting the following error:
    OTO information not complete for non ABAP instance of system &1 in SMSY
    We checked that this new message was created in note Note 1427761 - ChaRM: incorrect target system for action "System Logon".
    We went to the SMY transaction to the Product System definition for our system but we could not find which OTO information is missing there, where to load it, etc.
    We appreciate your help.
    Regards
    Esteban Hartzstein

    Hello,
    We have not applied the note separately, but we applied the support packages, so all the changes were applied, and therefore we are getting this error message  of "OTO information is not complete ....
    We have updated as suggested the info regarding the system in the SMSY.  We have read the Remote System Data.
    We will run SOLMAN_SETUP again to review the setup, and then test again
    We appreciate also if you provide any additional input.
    Regards
    Esteban Hartzstein

Maybe you are looking for

  • Problem with customer/vendor clearing

    Hi all, We are launching the payment proposal for this month and we have found one issue related to the clearing customer/vendor. The vendor invoices are filled in the Part. Bank Type with 1 or 2u2026, but the customer invoices has this field as blan

  • I have sold my IPOD Touch and want to remove my registration.

    How do I remove my registration of the IPOD Touch I have sold?

  • How to add ineligible tracks to my iPhone?

    So I have some spoken word tracks that I would like to add to my iphone but they are ineligible for iCloud for either the 64 kbs encode rate or the the file size being 30 + MB.   I really would prefer not to have to re-encode the files. With Itunes M

  • Razr HD SD card not mounting after update to JB 4.1.2

    My Razr HD which i just got in March no longer recognizes the SD card installed. I have tried removing and reinserting and when the phone boots it sees the disk for all of about 2 minutes then it gives error stating that the card was removed or unmou

  • Application Won't Stay Hidden

    This is so basic but I can't find the solution anywhere. DVD Studio Pro all versions for as far back as I can remember have this really annoying habit of popping up in front of any other open application multiple times through out the burning process