EWM : Confirmation of Warehouse task for a handling unit

Hi experts,
In EWM ,we have a requirement of confirming the open warehouse tasks in the backgound for a handling unit.
Is there a function module that can update the confirmation of the Warehouse task and change the status from open to comfirmed.
Kindly help us on this.
Thanks in advance.
Rashmi.

Hi koen,
I tried with the FM that you suggested...
But somehow with the process type 'stock removal' gives an error...
Is that that this FM will help to create a pick task for a particular outbound delivery--Tcode:/SCWM/TODLV_TO.
how will this FM take the outbound delivery as an input?or it will be on the corresponding sales order number and item number as input?
Being new EWM i require help on this..about how to go about creating the pick task for an outbound delivery which wil be equal to the warehouse request.
Thanks in advance,
Rashmi.

Similar Messages

  • Auto Confirmation of PICK TO's with Handling Units !!

    I want to Create an Outbound Delivery.
    I then want to automatically create pick transfer orders, in the background.
    I then want to automatically confirm these transfer orders, in the background.
    I am creating my Outbound Delivery with reference to a Sales Order using transaction VL10A.
    I have set-up Output Type WMTA to Auto Create my Pick Transfer Orders for the Outbound Delivery, when it is created.
    I have set Movement Type 601 to Auto Confirm (TO item can be confirm. immed = x/ AND Propose confirmation = x).
    I have set Source Storage Type for Picking to NOT require Confirmation (Stock removal requires confirmation = BLANK).
    BUT the transfer orders that are created are NOT confirmed immediately.
    I am using handling unit management but wouldnt see this as the problem?! anyone any ideas??
    thanks,
    A

    Hi,
    In trasaction code "OMLX" make the settingss as shown below,
    Against your warehosue number and movement type
    Confirm Immediatly = X
    Propose Confirmation = X
    No Two Step confirmation = X
    Screen TO Quit = "Blank" (No value should be entered)
    It worked for me, please check and let me know.
    Regards,
    K.Annadurai.

  • Single Transfer Order for Multiple Handling Units

    I have been researchig the ability to create a single transfer order for multiple handling units.  My assumptions are if it can be done that:
    1) A transfer order can have a single source, so if the source document for the handling unit (delivery) is different, that means different transfer order
    2) A TO can have multiple materials (line items) with different destination bins and quantities per bin
    I looked at the configuration for TO Split, but it's not clear that this will handle my requirement.
    I also saw this http://aq33.com/material-management/Articles-005798.html and it also says that my requirement can't be meant.  I'm just checking before I tell my customer this cannot be done.

    Yes you are right, if Source document is different, you need to go with different TO.
    But you can choose the Handling unit split, while creating a TO itself. i.e., You can quantify the goods for each handling unit.
    Edited by: Ganesh M on Feb 29, 2012 6:20 AM

  • Need help for multipule handling unit get printed out

    Hi ,
    I have multipule handling unit in case of issuing the output for selected multipule handling unit using output type . I am getting one handling unit to be printed out . Please can u suggest any configuration is recquired to get selected printed out all the select handling assigned to output type
    Any configuration is recquired to get printed out .
    process followed .
    give DO no  for vl02n (tcode)  and then pack from the menu we get handling unit need to be selected  3 or 4 handling unit then go to extra's and select output given here output type and save it .Then in nace i got only one handling unit.

    You can use the t-code VL74 for printing handling unit output.

  • PPOME - Can't insert the SAME task for different organization unit

    Hi all,
    I have a doubt; in SAP 46C, it seems that is impossible to insert in PPOME, Detailed window, Tasks tab the same task for different organization unit. The only way to do this is in PP01 - General management, where you can explicitely create a [B-007] relations with the same "T" Object. Now, it is a little bit difficult for a user to switch from PPOME ad PP01 when defining new organizational structure.
    The question: is there any way to insert the <b>SAME</b> task directly in PPOME, overwriting the standard behaviour of the system that by default create a new task for each new insertion?
    Thanks all
    Paolo

    Hi Naveen
    thank you for your prompt reply.
    The issue that I want to solve is that some organization unit (not all) must be flagged for an external export to another system, depending on some characteristic of each org unit. I didn't find a similar attribute on standard field, so I thought to insert a common task to all the org units to export, so that this relation can serve as the missing attribute on org unit definition.
    PP01 let me insert a task (type T, and not TS) on an org unit directly, so I want to know if I'm going to break some standard behaviour of SAP if I insert a task on OU.
    Thank you
    Paolo

  • Any other Transaction similar to HUMO for retriving handling units .

    Hi SAP GURUS ,
    Please accept my thanks for the help rendered so far .
    I have a Quary ,Do we have a Transaction parallel to HUMO for retrieving Handling units from stocks .
       similar to HUMO .
    Thanks in Advance !!!
    Adarsh

    Hi ,
    Thanks for your reply , but the retrieval of HU's via HUMO is showing LIst of HU's which is otherwise not possible othrewise
    The easy option if the report doesnt show up once you execute is ,go for Radioa button Quick search and you will get the report
    After havign raised this issue with SAP ,they have suggested us to for varients including combination of plant /material/ and storage location
    otherwise ,we can as well archive the very old /unused hU's so that the report retrival through HUMO will be fast
    Incidentally there is no other way except HUMO
    Thanks for the reply
    warm regards,
    Adarsh

  • Automatic Creation and Confirmation of Warehouse Task in EWM 5.1

    Hello,
    We want an automatic creation and confirmation of the warehouse task in EWM 5.1 on the based of a delivery type and warehouse number.
    The scenario goes in this way... As soon as the inbound delivery is created/replicated in EWM, the creation and confimartion of warehouse request, warehouse task and warehouse order (all the transactions) should be called automatically. And the goods receipt should be posted.
    Can someone throw more light on the customizing/BADI/enhancements etc required??
    Thanks and Regards..

    Hi koen,
    I tried with the FM that you suggested...
    But somehow with the process type 'stock removal' gives an error...
    Is that that this FM will help to create a pick task for a particular outbound delivery--Tcode:/SCWM/TODLV_TO.
    how will this FM take the outbound delivery as an input?or it will be on the corresponding sales order number and item number as input?
    Being new EWM i require help on this..about how to go about creating the pick task for an outbound delivery which wil be equal to the warehouse request.
    Thanks in advance,
    Rashmi.

  • Confirming transfer order for nested handling units (picking and shipping)

    Hi
    My shipping location is HU + WM, I understand we cannot "auto confirm" Transfer Orders during creation from an outbound delivery (LT03) in the case of nested HUs because the system wants to know which exact box HUs ( The TO only specifies the pallet HU...storage unit)
    I have an automatic Pick HU created during TO confirmation but the system still prompts for me to enter  box HUs that need to be shipped/repacked on LT12. This makes logical sense but is slowing down our shipping process. Since we do not put HU labels on our boxes, the picker has to go into HUMO, enter the pallet HU, retrieve the box HUs and finally enter some of those on the TO confirmation screen to match the open quantity. In reality we don't really care what HUs he picks as long as he picks from the right pallet.
    Is there any way to automate this? If the system can pick box HUs sequentially, randomly or create further pick HUs. Anything but doesnt ask the picker to put in the box HU numbers
    OR
    Is there a way to auto confirm TOs during creation
    OR
    Is there any way to putaway box level HUs into the warehouse at the end of the production line so that Storage Unit is the box HU number and not the pallet HU number, that way it wouldn't prompt me for box HUs during picking.
    I would really appreciate your help.

    This is the standard SAP for picking nested handling units.  You can do some more reading on this by accessing the SAP note 829266.
    We had a similar problem with nested handling units - what we ended up doing was writing a BDC program that would take the nested handling unit and pack it back onto that HU instead of the pick HU after TO confirmation was done in the delivery. 
    In order to get your TO to automatically confirm, check the configuration for the storage type that its picking from - look to see if "Storage Type requires confirmation for removal/placement" is checked. 
    You can als ocheck the movement type configuration for Propose Confirmation.

  • Output Determination for Shipping/ Handling Units etc

    Could someone give me the steps to out put determination for outbound deliveries.
    I am trying to get the labels printed for materials and handling units. I do not want a partner function while creating the records, however it does not allow me to proceed without a partner function. I am not sure if i have understood the process right. I have got BA00 working perfect. A response will be appreciated.

    Susan,
    For output detrmination type for lets say material labelling output type MALB has acess sequence that links two tables one is related to shipping materail type and other is partner function or may be combination of partner function ship2 party and handling unit or packaging materail.
    If you dont want partner function then remove the tables in the acess sequence make it shiapping materail type as more specific entry in the acess sqeuence amt check as exculsive so that by default it should create record on the basis of shipping material.
    I hope this would not wllow you to have partner function in any of theacesssequence you are using.
    I hope this will work for u
    Thanks
    Saurabh

  • FM for reversal handling unit

    Hi All,
    I am using SAP version 4.6c.
    I am using T.code MFHU to declare one handling unit.
    I want function module to reverse the handling unit which is declared using MFHU transaction.
    Thanks in advance.
    points assured.
    Krishna Yerram.

    Please go step by step process of finding a BAPI or a function for a transaction below
    Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this. 
    1. Find out the package of the transaction. 
    Start Va01 go to system --> status. 
    Double click on transaction 
    Package is VA 
    Open this package in SE80 
    Open business engineering-->Business object types 
    Find the BO which sounds the most appropriate 
    I would suggest BUS2032 Sales Order 
    Double click. 
    Open methods. 
    Find the released method with from data or something similar in the name 
    , Createfromdat2 
    Position the cursor in it and click the program button 
    Scroll down to find the bapi used in this method 
    With this way you can also find out programs and FM's 
    2. Start va01 go to system-->status 
    Double click transaction VA01 
    Double click on package 
    Read the application component. (this is SD-SLS Sales) 
    Then open the transaction BAPI 
    Sales and distribution>Sales>sales order 
    createfromdat2

  • Function Module for UNPACKING Handling Unit from Inbound Delivery

    Hello Experts,
    I am working on a RFID program to Receive goods from vendor...
    One of the steps of the program should CHANGE the quantity inside a received batch.
    To do so, I need to UNPACK the Handling Unit first... then change the quantity.
    I am using the following Function Modules to do so:
    - 'HU_GET_HUS'
    - 'V51P_FILL_GT'
    - 'HU_PACKING_AND_UNPACKING'
    - 'HU_POST'
    First 2 FM works fine...
    But when I get to the 3rd one, I keep getting "NOT_POSSIBLE" error...
    Have anyone done this before??
    Here's the code I've done to do some testing before putting it into my code...
    PLEEEEEEEEEEEASE HELP.
    TYPE-POOLS: vsep. PARAMETERS: p_venum LIKE vekp-venum.
    DATA: wa_object LIKE hum_object,
          it_object TYPE TABLE OF hum_object.
    DATA: wa_v51vp LIKE v51vp,
          it_v51vp TYPE TABLE OF v51vp.
    DATA: flag LIKE v51p_select_flags.
    DATA: it_venum            TYPE STANDARD TABLE OF hum_venum,
          ef_rcode            LIKE sy-subrc,
          et_vekp             TYPE STANDARD TABLE OF vsep_s_vekp,
          et_vepo             TYPE STANDARD TABLE OF vsep_s_vepo,
          et_vevw             TYPE vsep_t_vevw,
          et_highest_level    TYPE vsep_t_venum,
          et_messages         TYPE huitem_messages_t,
          is_packing_request  TYPE vsep_s_pithu,
          es_p_request        TYPE vsep_s_pithu,
          es_item             LIKE vepovb,
          cs_header           LIKE vekpvb,
          ef_number           TYPE vpobjkey,
          et_header           TYPE STANDARD TABLE OF vekpvb,
          et_items            TYPE STANDARD TABLE OF vepovb,
          et_item_serialno    TYPE vsep_t_rserob,
          et_history          TYPE hum_history_t,
          et_highest_levels   TYPE hum_venum_t.
    DATA: wa_venum            LIKE hum_venum,
          wa_vepo             TYPE vsep_s_vepo,
          wa_vekp             TYPE vsep_s_vekp,
          wa_items            TYPE vepovb,
          wa_header           TYPE vekpvb.
    START-OF-SELECTION.
      wa_venum-venum = p_venum.
      APPEND wa_venum TO it_venum.
      CALL FUNCTION 'HU_GET_HUS'
        EXPORTING
          it_venum          = it_venum
        IMPORTING
          et_header         = et_header
          et_items          = et_items
          et_item_serialno  = et_item_serialno
          et_history        = et_history
          et_highest_levels = et_highest_levels
          et_messages       = et_messages
        EXCEPTIONS
          hus_locked        = 1
          no_hu_found       = 2
          fatal_error       = 3
          OTHERS            = 4.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE et_header INDEX 1 INTO wa_header.
      CALL FUNCTION 'V51P_FILL_GT'
        EXPORTING
          it_venum         = it_venum
        IMPORTING
          ef_rcode         = ef_rcode
          et_vekp          = et_vekp
          et_vepo          = et_vepo
          et_vevw          = et_vevw
          et_highest_level = et_highest_level
          et_messages      = et_messages
        EXCEPTIONS
          hu_locked        = 1
          no_hu_found      = 2
          fatal_error      = 3
          OTHERS           = 4.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      READ TABLE et_vepo INDEX 1 INTO wa_vepo.
      READ TABLE et_vekp INDEX 1 INTO wa_vekp.
      MOVE-CORRESPONDING wa_vepo TO  is_packing_request.
      is_packing_request-belnr    = wa_vepo-vbeln.
      is_packing_request-quantity = wa_vepo-vemng.
      is_packing_request-veanz    = '-1'.
      is_packing_request-meins    = wa_vepo-vemeh.
      is_packing_request-exidv    = wa_vekp-exidv.
      CALL FUNCTION 'HU_PACKING_AND_UNPACKING'
        EXPORTING
          is_packing_request = is_packing_request
        IMPORTING
          ef_rcode           = ef_rcode
          es_p_request       = es_p_request
          es_item            = es_item
        CHANGING
          cs_header          = cs_header
        EXCEPTIONS
          missing_data       = 1
          hu_not_changeable  = 2
          not_possible       = 3
          customizing        = 4
          weight             = 5
          volume             = 6
          serial_nr          = 7
          fatal_error        = 8
          OTHERS             = 9.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'HU_POST'
        EXPORTING
          if_synchron = 'X'
          if_commit   = 'X'
        IMPORTING
          ef_number   = ef_number.
      break nunfx004.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Thanks in advance,
    Fernanda

    Hi ,
    Check this code.
    Pack componet HU to Overpack HU. *
        l_packing_req-venum = g_ovrp_venum.                  "Overpack Internal HU
        l_packing_req-exidv = g_ovrp_exidv.                  "Overpack External HU
        l_packing_req-veanz = '1'.                     "PACK Constant
        l_packing_req-sub_hu_venum = l_int_venum.
        l_packing_req-sub_hu_exidv = l_int_exidv.       "Componet External HU
        l_packing_req-velin = '3'.                      "HU Type Constant
        l_packing_req-quantity = '1.000'.
    call function 'HU_PACKING_AND_UNPACKING'
          exporting
            is_packing_request = l_packing_req
          exceptions
            missing_data       = 1
            hu_not_changeable  = 2
            not_possible       = 3
            customizing        = 4
            weight             = 5
            volume             = 6
            serial_nr          = 7
            fatal_error        = 8
            others             = 9.
        if sy-subrc <> 0.
    error
          clear: v_msgv1, v_msgv2, v_msgv3.
          v_msgv1 = text-031.
       PERFORM display_message USING v_msgv1 v_msgv2 v_msgv3.
          leave to screen sy-dynnr.
        endif.
    No Errors --> POST HU
        call function 'HU_POST'
          exporting
            if_synchron = 'X'
            if_commit   = 'X'.
    plz write what you are passing to 'HU_PACKING_AND_UNPACKING' and hu_post fm.
    Regards
    Mohinder Singh Chauhan

  • Unable to create Warehouse Task from Warehouse Request in EWM

    Hi All,
    I have created Inbound Delivery in ERP system which created Inbound Delivery Notification in EWM and then converted to Inbound Delivery (Warehouse Request).
    In Warehouse Request screen, using follow on functions --> Warehouse Task, I have been trying to create Warehouse Task but I am facing the below error.
    There are no unpacked or packed warehouse request items for processing
    Message no. /SCWM/UI_TODLV002
    Diagnosis
    For the transmitted search criteria, the system could not find any warehouse request items or handling units for which a warehouse task can be created.
    The system can only find a warehouse request or handling unit if the following conditions are fulfilled:
    The correct process was selected according to the document searched for:
    Putaway for inbound delivery
    Stock removal for outbound delivery request
    Posting change for posting change
    Stock transfer for internal stock transfer
    The warehouse number entered matches the warehouse number in the warehouse request.
    The warehouse process type is set in the warehouse request.
    Movement control confirms that the delivery is relevant for picking.
    No warehouse requests have yet been created for all of the requested quantity.
      System Response  
    The system does not propose any warehouse request items or handling units for processing.
    The above settings already in place for me, but still I am facing the error,
    Request your help in resolving this issue.

    Hi Juergen/Sandip,
    We have material number and quantity in Warehouse Request.
    But Warehouse Request has 'Locked" indicator and PPF actions tab at item details has no details and "Validations" tab shows
    I have created "Packaging Specification" for this material but didn't pack. Do I need to pack it?
    Please suggest.

  • Ewm Deconsolidation Warehouse tasks

    Hello all,
    I try to customize goods-receipt with the help of process-oriented storage control.
    The three steps are: unloading, deconsolidation, putaway.
    Everything is working fine, but after creating the putaway HU`s only one of them has got a putaway warehouse task.
    I have to divide the HU`s so that the putaway HU`s include only one Product per HU.
    For Example:
    ProductA: 200
    ProductB: 200
    100/per Putaway HU
    They arrive in an Container HU and putaway HU`s should be created for the putaway in the High Rack.
    In the deconsolidation I create the first putaway HU with 100 piece of ProductA, I do the same for the rest of ProductA and also for ProductB.
    So for my process I need 4 HU`s and each of them needs a warehouse task for putaway.
    In my process I have 4 HU`s and only one of each Product has got the warehouse task.
    I hope I could explain my problem although I have some wording problem with warehouse vocabulary.
    Thank you

    Hi,
    the condition type coming from the BC set supposedly is 0PAL, important is also if the proper determination procedure for the palletization procedure is assigned to the warehouse (in which this condition type is included then).
    When the putaway whse tasks are created, is depending on what you base the requirement for deconsolidation on. But if you just have these three steps as described, I believe you have to have them in the first step done.
    Best regards
    Juergen

  • Warehouse Task NOT Getting Saved, getting dump "Posting_illegal_statement"

    HI All,
    While trying to "create + save" warehouse task for the inbound delivery (in EWM 9.1) , warehouse task numbers are getting generated but not saved. I am getting an update error saying "update was terminated for author ___" . On checking the dump in ST22, it mentions the error as "POSTING_ILLEGAL_STATEMENT"  ,ABAP Program "SAPLSYDB" and application component "BC-DB-DBI".
    Please help.

    Hi Jayson,
    The error is related to the ABAP coding of the particular program. The program related to sales and billing.
    The error you get must be the user own output screen.
    Please refer to the SAP Note for further analysis and solution.
    http://service.sap.com/sap/support/notes/1472777

  • Warehouse task in status "b" (waiting) will not be activated

    Dear experts,
    in the following situation i want to execute a stock removal and the following problem appears:
    When the warehouse task for stock removal will be created, the layout-oriented storage process control creates two warehouse tasks:
    The first warehouse task is MFS relevant and will be automatically confirmed by the resource (Telegramtraffic).
    The second warehouse task (not MFS relevant) stays in status "b" and can´t be activated. But it has to be confirmed manuelly by the user and because of status "b" it´s not possible for the user to confirm the warehouse task.
    Why will the second warehouse task not be activated? Do someone know any hints to clear this situation?
    Thanks in advance.
    Best regards,
    Rodrigo

    Hi,
    the configuration of the first storage type is:
    The second type is configurated:
    The third is:
    The first warehouse task is from AKL1 to EAR1 and it works.
    The second warehouse task is from EAR1 to EARE and here is the problem.
    Best regards,
    Rodrigo!

Maybe you are looking for