Excange rate should trigger in the billing document as per the billing date

Hi Folks,
I have a below scenario.
Today I have created the Sales order and after 2 days I am creating the billing document. In the billing document the  exchange rate is triggering as per the sales order date, but I want  my billing document should be pick up the exchange rate as per the billing document  date.
Please help me on this issue.
Thanks
ANGKS.

Hi,
Thanks for all your replays, but still my requirement is incomplete.
Once again I am explaining here.
Step 1. I created the sales order on 01/01/2009 and Delivery.
Step 2. I created the Invoice on the same day that is 01/01/2009 the system calculates the exchange rate from the sales order pricing date which is on 01/01/2009.
Step 3. I have created the Intercompany Billing document after 2 months i.e. march.
Mean while my exchange rates are changed.
My Intercompany billing document should pick up the exchange rate as per the billing document date. This is for the march.
But the problem is: My intercompany billing document is picking the exchange rate as per the pricing date in the sales order which is 01/01/2009.
As mentioned my intercompany billing document should calculate exchange rate for March.

Similar Messages

  • Billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc.

    Hi All,
    In case of billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc. no. Each time user has to clear the doc. manually. We have observed this issue after recent patch updation dated 22nd Feb’2014. Till 21st Feb’2014 the cancelled doc. has been cleared automatically against their respective billing documents.
    Please guide.
    Thank you.

    Hi Gopi,
    Please chheck SAP Note No. 1259505. It explains two ways in which SAP releases cancellation documents to FI.
    OSS NOte 1259505 lists the possible causes from SD side &
    OSS Note 309208 lists the possible causes from FI side.
    Regards,
    Kavita

  • Two Separate Billing Documents created in the collec Billing through VF04

    Dear  Forum Friends,
    I am doing the collective Billing through VF04 for two deliveries (80015032 and 80015034) of the same day.
    When I am finding in VF05 it has been observed that Two Billing documents instead of one billing document have been created against the two deliveries.
    Could anybody guide where the problem is? I guess the problem is in Copy control but exactly what field is to be changed please guide me. I tried with the Data routine “003” and “007” but nothing happened.
    Regards,
    Jans

    Dear Jans
    If data from the related reference documents differs in the header fields of the billing document, the system will automatically split the invoice.  For example,  header datas like Payment Terms, Payer, Shipping Conditions etc differs, there will be invoice split.
    To find out the reason for split analysis, proceed as follows:
    Enter the number of the first billing document that you wish to compare.
    Choose Environment --> Split analysis.
    Enter the number of the second billing document which you wish to compare to the first in the dialog box.
    Enter the billing document number and choose Continue.
    The system displays the Billing document split analysis log. It is made up of three parts. The first shows the header partners and header fields which are different in the two documents while the second and third columns show the respective values for these fields.
    This provides you with a clear overview of which fields have differing contents, the information available, and why there was an invoice split.
    Thanks
    G. Lakshmipathi

  • How can I find out in the billing document, who creat the billing.

    how can I find out in the billing document, who creat the billing.
    thanks.

    On  VF03 -Enter billing document number>>press on enter button>>you will get overview of billing document item>> select menubar>>Goto>>header>>header parthner>>you will get full screen with Name "Created By".
    Thanks&Rgds,
    Rajesh

  • Reverse the material document before cancelling the excise invoice.

    Dear Experts,
    While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
    But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
    MINI

    Hello
    follow the below steps
    1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
    2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
    Thus the excise postings are reversed.
    3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
    above the procedure right. you will get this updation excise registers also
    Laxman

  • Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

    I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
    I have tried Acrobat 9, 10 and 11.
    Any advice (apart from use Windows 7! ) would be most welcome.
    Many thanks.

    If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
    Is this a local or online PDF?
    If local, is the file really exactly the same?
    If online, in what browser?

  • How to add the library document version to the parent Document content type?

    Hi All,
    I have a PWA instance with a project site for each project.
    Each project site has its own document library.
    Now I want to create several Templates to be available within each document library.
    I have created the new content Site Content Types (Site Settings > Site Content Types) to fit my needs; each content type has the "document" content type as parent type.
    Now I want include the "version" property (the dynamic value from the versioning) to each new document type, so I have tried to enable the "Information management policy settings" to the parent "document" type or the new ones,
    including the label "{Version}", but I receive this error:The label reference, Version, could not be found.
    So the only way to do this, is to open each site document library and make this change within it.
    Why I can't enable the Lable at the Site level?
    Thanks

    Hi,
    I can reproduce the issue by adding {version} or {_UIVersionString} in site content types > Document > Information Management policy settings > enable label.
    As workaround, please create a document library, then add label in document library settings > Information Management Policy settings. Now save this document library as template and create new document library based on this template, the policy settings
    will be saved for new document libraries.
    Regards,
    Rebecca Tu
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How can I clear the recent document list on the welcome page?

    Have some confidential docs that I don't want to appear when the program is launched. How can I clear the recent document list on the welcome page and the "open recent" list?  thx

    It's not an option in the prefs. It's a hidden file that makes up part of the preference set (as far as I know, most, or all of the seetings you can adjust inside ID's prefences dialog are actually saved in the other half of the set, InDesign Defaults). For more information, see Replace Your Preferences

  • J1iex cancellation -Reverse the material document before cancelling the exc

    Hi ,
    I am facing problem in reversing J1iex excise invoice .
    OUR CASE is like
    We have a purchase order of 100 pcs , against which a delivery of 10 pcs was made by the vendor.
    1) At the time of J1iex Capture , user has entered 100 pcs (by mistake) as excise invoice Qty.
    2) MIGO with Mtype 103 and 105 were prepared for 10 pcs only
    3) J1iex was also posted for 100 pcs
    Since there was a mistake while entering excise invoice qty in J1iex ,therefore we decided to reverse the entire process.The step followed were ...
    1) Reversed the Material document (using 106 movement type)
    2) Re-Posted the same excise invoice thru J1iex to reverse the Part-11 enteries
    and now when I am trying to cancel the J1iex - excise invoice , system is prompting me an error message
    "Reverse the material document before cancelling the excise invoice"
    I hope,  I am following the correct process.
    Since the material document is already reversed therefore wondering why system is prompting this ERROR message.
    Need your help
    Regards
    Shrey

    thx

  • If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

    If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

    Since you don't really have a question, I will give you a very broad information source for the next time you have a Time Machine question.
    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Oh, you cannot use a computer whose only disk drive is the target of a an OS X cloning operation regardless of what software is used for the clone. You can, however, use the source drive except if you try to clone using Disk Utility.

  • Billing document created at the time of delivery

    Hi,
    Is a Billing document created and posted to the system at the time the Delivery document is created and posted to the system? When does the Billing document is created and posted?
    Thanks

    Hi,
    Billing is not automatically created as soon as delivery is created & posted.
    It has to be either manually created or set up in the background.
    The background job is generally setup to happen in the last working hours or they are set up so that they can be sent through mail or fax to the customer.
    The frequency of the background jobs depends on the requirement of the client, if they have an urgent requirement which cannot wait till the background job the user can manually create the bill from T-Coe VF01.

  • The cost of billing document is not the same as GI cost

    Dear Expert,
    Condition EK02 in the billing document is not picking up the Cost of Goods sold at the time of goods issue.
    We have a Made-to-Order Sales Order with a production order. The cost condition EK02 on the billing document is picking up the EK02 from the sales order. We would like it to pick up the actual cist of goods sold (cost on the goods issue).
    Any help would be appreciated.
    Many thanks!
    Raymond

    Hi Raymond,
    My proposal: insted the condition type EK02 - Calculated Costs choose the condition type VPRS - costs.
    I guess you want to transfer the costs into CO-PA ... if yes, don't forget to assign the condition type to a value field (KE41).
    Have a nice day

  • Create Billing document automatically from the outbound delivery

    Hi experts,
    I'm not sure my client's requirement can be implemented but i'm posting this thread just in case someone have a suitable solution.
    My client wloud like that billing documents (VF01) are created automatically when the outbound document (VL01N) is saved. He doesn't wont to perform an additional action, so the the custom transaction solution doesn't satisfy his requirement
    Is there any solution to do this? (User Exit or Customizing)
    Thanks

    Hi,
    One idea. You can do it with the userexit USEREXIT_SAVE_DOCUMENT in report MV50AFZ1. Here, you have the number of delivery. I suggest you to call a BAPI with a job created with the sequence of functions JOB_OPEN', 'GET_PRINT_PARAMETERS'
    , 'RS_CREATE_VARIANT', 'JOB_SUBMIT'. 'JOB_CLOSE' with a gap of time (eg: 2 or 3 minutes). You can call a function IN UPDATE TASK in this function. (read Note 415716 - User exits in delivery processing), and in the coding of this function you can create the job and call a report with the BAPI (for instance, BAPI_BILLINGDOC_CREATEMULTIPLE). After, you can control the creation of invoices with tcode SM37.
    I hope this helps you
    Regards
    Eduardo
    PD: I forgot it. Control in which event you call the BAPI via job. I suggest you when you create the movement 601. You can do it with this coding:
        IF xvbuk-wbstk NE yvbuk-wbstk
        AND xvbuk-wbstk = 'C'.
           "code
        ENDIF.
    Edited by: E_Hinojosa on Jan 21, 2011 9:15 AM

  • When canceling the billing document it carries the invoice referance as "V"

    Hi,
    When we cancel the billing document using VF11 it carries the invoice reference as "V". we need to change this and we need to take the original invoice document number as the invoice reference. Pls advice how to do this.
    Thank you in advance!
    Regards
    Keshi

    Hi
    Check with your SD Consultant. This can probably be achieved through Copy Controls routine for the cancellation document type in SD. You will have to adjust your copy control routine accordingly.
    Regards
    Sanil Bhandari

  • Multiple Deliveries into one Billing document  Based on the Shipment Number

    Hi,
    After searching, am posting this thread.
    I know the Invoice Slipt Parameters but i need to stop one invoice slipt parameter i.e. Billing Date.
    My Requirement:
    2 deliveries are created with different Billing Dates and attached to a single shipment.Now i want to combine these deliveries into single invoice based on the shipment number..
    Please put some ideas tht can help me  to solve this..
    Thank you in Advance.
    Edited by: Aditya Roy on Mar 13, 2009 8:11 AM

    Hi
    Payer
    Payment terms
    Billing date or billing due date
    Destination country
    Billing doc type
    Incoterms
    Actual GI date
    Foreign data trade
    If these are same in all delivery documents they can be combined into single billing
    This is controlled in copy controls in VTFL choose del type and billing type and your item category
    In that VBRK/VBRP if you choose 001 combined billing will happen
    In VF04 you can do the billing or in VF01 you have to input all the delivery nos manually and do the combined billing
    The same qn was posted by you on NOV 21st with so many replies?
    Why are you posting again and again?
    Pls close the thread whereever possible
    Regards
    Raja
    Edited by: ramanathan raja on Dec 14, 2008 5:00 PM

Maybe you are looking for