Excel upload data to planning book not working

Hello Gurus,
i have checked the online resources first before posting this thread here as this is most old topic relating to upload of excel data to planning book key figures.
Here is what i have done so far
1) from the planning book, i chose a view and downloaded the file to desktop and saved it as CSV. i populated the key figure values and saved the csv file as-is back to desktop
2) i had to remove the hdeader from the file as APO threw back an error that it could not interpret the period (header) as the number
3) when i took out the header i simply pasted the values and the file was ok
4) i went to planning book, loaded the file, checked the file and it said that the data was read and i clicked on upload the file
5) everything was green, then but i do not see the values in the grid of the planning book
what else i'm missing.
can someone please help me
thanks
Ravi

Hello DB and Ada. Thank you for your valuable suggestions. I know i might be missing something silly here. If i keep the header that i downloaded from the planning book into csv file, i get an error while uploading the file back to planning book that unable to interpret 11/2014 as a number.
P11/2014 is the header, Period 11/2014 is the fiscal period. we plan in fiscal periods.
if i take out the header from the csv file and just populate the key figure values, then i do not get any error when i load the file back to planning book, but then the values do not show up in the planning book grid.
i'm keeping the planning book in the change mode while uploading the file as i got that error saying that i need to keep the planning book in change mode for the file to load data properly to planning book.
Thanks
Ravi

Similar Messages

Error -- While Uploading Data into Planning Book

Hi all...
working on SCM 4.1...
In Planning book...while loading the data of one SKU-Location into the PB , i am getting the below error...
"Overflow during propagation calculation: Number too large"
Message no. /SAPAPO/OM_TS078
Diagnosis
An overflow occurred while propagating a change to a key figure within the LCA routine.
In this case an internal error in the LCA routine is concerned.
*ProcedureCreate an OSS message as detailed in SAP Note 167280.*
can anybody help me to resolve the same as i couldnot ablt to view the data in planning book for one of the Product-location.
Regards,
Rajesh Patil

Hi Senthil,
For Some of the SKUs it is giving the Error , some abrupt values are stored in Live Cache for these SKUs(CVC), thats why it giving the Error.
The only solution is ..i have to delete the CVCs and create new one...
But i will loose the data as we cant take the Backup of Old CVC data --> Giving COM Error
The reason of Abrupt Values in Live Cache Could Be -->.>
Macro/Alerts
How can we fix these types of Error , as regularly i am getting these Error??
Is there any Note/Patch to overcome this issue?
Will be GR8 if i will get the solution..
Regards,
Rajesh Patil

How to extract data from planning book

nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o     Forecast
o     Sales Order
o     Distribution Demand (Planned)
o     Distribution Demand (Confirmed)
o     Distribution Demand (TLB-Confirmed)
o     Dependent Demand
Total Receipts (Key Figure RECTO):
o     Distribution Receipt (Planned)
o     Distribution Receipt (Confirmed)
o     Distribution Receipt (TLB-Confirmed)
o     In-Transit
o     Production (Planned)
o     Production (Confirmed)
o     Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o     Stock on Hand (Excluding Blocked stock)
o     Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps.

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

SPA3000 F/W 3.1.20(GW) last digit repetition within the dial plan is not working for gateway 0-4

H/W: SPA3000
F/W: 3.1.20(GW)
Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
Dial "17474743246#" which works for gw1.
Dial "#17474743246" which also works for gw1.
Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
Is there any way to specify Interdigit Short Timer with <:@gw0>?
BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.

IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try.

The date and time is not working after setting it to current date and goes back to may,26 2011

the date and time is not working after setting it to current date and goes back to may,26 2011; 2 PM . I bought my ipod tocuh 4th gen on july 18th

On the iPod, make sure your Calendar is set to Gregorian (Settings > General > International > Calendar). Also make sure your date and time on your computer is correct as well as the Time Zones on both.

[svn] 4377: Bug: BLZ-292 - Data Push sample does not work in BlazeDS Turnkey

Revision: 4377 Author: [email protected] Date: 2008-12-22 16:16:25 -0800 (Mon, 22 Dec 2008) Log Message: ----------- Bug: BLZ-292 - Data Push sample does not work in BlazeDS Turnkey QA: Yes Doc: No Checkintests Pass: Yes Details: * Regression due to some refactoring of user-agent handling that was failing to set up defaults if no explicit <properties> were defined for the <channel-definition>. This meant that for IE, no kick-start bytes were being pushed down the streaming connection at setup time... Ticket Links: ------------ http://bugs.adobe.com/jira/browse/BLZ-292 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/endpoints/BasePollingHTTPEndpoint.java blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java blazeds/trunk/modules/core/src/flex/messaging/util/UserAgentManager.java

Hi,
Thanks for your feedback!
This feature has been going through a lot of changes with the BlazeDS and Flash Builder builds.
We request you to pick up the BETA2 build of Flash Builder and BlazeDS 4.0.0.10654, hopefully you should see things working fine.
Kindly let us know if you still encounter problems.
Thanks,
Balaji
http://balajisridhar.wordpress.com

Hey, I wanna download Lion for free, so i need UP-TO-DATE , but it do not works , please help

Hey, I wanna download Lion for free, so i need UP-TO-DATE , but it do not works , please help

I think you misunderstood the guy. The up-to-date program isn't working for a lot of people. I'm eligible for the free upgrade but it fails to recognise my serial. From what I've read, this is affecting a lot of people who purchased their computers online. Apple seems to be fixing the issue though, so my advice would be to keep trying. Alternatively, click on the manual verificaton link so they can check your order for you and send the redemption code after they do.

I have accidentially added a video to the photostream upload and now it will not work

I have accidentially added a video to the photostream upload and now it will not work, it would not let me delete the video from the upload file, so I have uninstalled icloud from PC and deleted all the folders. And started again, but still not working

You supply little pertinent about the MBP and the iPhone.
First... on the MBP... Click on the Apple icon.. Top left in Finder...
 > About this Mac > Version...what does it say?
Which iPhone and what is its' iOS Version.

Project Plan icon not working

The little icon found on the left that allows you to access your project plan is not working for one of my project managers, who is the owner of that specific project. However in the Admin's view they are able to access it by clicking that button.
Any thoughts why?

Hi EPM Admin,
The issue occurs only for 1 PM? Is the icon working for this PM with another view? Can the PM try on another machine? When you say that it doesn't work, do you have any error message or just nothing happens? Have you tried refreshing IE deleting the cache
(press CTRL F5)?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Hi Ciaran19,
Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
Best,
Sara

Error in reading data from planning book

Hi Guys,
I am facing error in reading data from SNP planning book .
When i try to read single product data for simulation version , it gets loaded correctly.
However, when i try loading data for more than one product, then i get error "Product does not exist".
I checked all products are assigned to model-version.
I tried running consistency check as well and after it finished got message as "All inconsistencies can not be corrected".
Please let me know if any one had faced this error.
Thanks.

Hi,
Consistency check should solve the problem in this case. Try running it specifically on the version you are using. It should work.
Regards,
Guru Charan.

Steve Muenchs file upload sample (No. 69) does not work with JDev 10.1.3.1

Hi,
I installed and started Steves sample about uploading and storing OrdImage types (http://otn.oracle.com/products/jdev/tips/muench/jsfordimage/JSFOrdImageExample.zip).
When I try to upload a file I get an exception:
java.io.EOFException: Per-request disk space limits exceeded.
     at oracle.adfinternal.view.faces.webapp.UploadedFileImpl.loadFile(UploadedFileImpl.java:187)
     at oracle.adfinternal.view.faces.webapp.UploadedFileProcessorImpl.processFile(UploadedFileProcessorImpl.java:96)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doUploadFile(AdfFacesFilterImpl.java:247)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:163)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:106)I have found other postings concerning uploading a file with JDev10.1.3.1 (af:inputFile bug JDev10131 production ignores Per-request disk space limit
Is it a bug with JDev 10.1.3.1? Any workaround available?
I'm using JDev 10.1.3.1 on WinXP.
Thanks,
Markus

I managed to correct this problem.
The situation is the following:
A CRUD page (Example: userList.jsp and userForm.jsp).
The first page there is a af:table with tableSelectOne and a Edit button. (theres also other components, like af:menuBar and af:form, html, body and head)
On submit, the backing bean(requestScope) gets the selected object (table.getSelectedRowData()), copy the values to the form fields and send (redirect=false) to the form page.
When i try to update, the fileupload does not work and ignores the valueChangeListener. All the other fields are updated correctly.
The form page is used to do Inserts and the upload works correctly.
The problem is, when you redirect (redirect=false) from userList.jsp (usesFileUpload="false")
to the other page, that uses the upload, the form page does not get the enctype="multipart/form-data"
To solve it, put usesUpload="true" in both page , and you will get enctype="multipart/form-data", and upload to work.
Changing components, the af:menuBar has a similar problem.
I got a menubar with 2 goMenuItem.
On each page the corresponding goMenuItem has selected="true".
On redirect, from list page to form page, the selected goMenuItem is the one on the ListaPage, and not the form page! It only changes if I click on the tab I want!

Planning book not saved

Hi
A profile assigned to a selection ID does not u2018sticku2019 ... the selection ID loses the fcst profile once it is called back up again
Basically when I assign a forecast profile in interactive planning - it is not being saved...
When I enter again in SDP94 I am getting blank screen. basically it should save the last screen we visit.
is there any process to stick back last visited screen. when we reopen the SDP 94.
Could any one guide me please..
Thanks
Anitha

Hi,
1)Load the planning book/data view
2)You load the selection in selection in planning book
3)Load the selection
4)Go to the change mode
5)Click the interactive selection
6)In the profile tab change the profile which you want to run
7)Run the forecasting cycle by clicking the button in top row
8)In the Profile tab save the profile by pressing save button
9)Save the data again by clicking the save button in the top row
10)Come out of interactive & reopen interactive
11)You can see the earlier master profile what you changes
Regards
Yogeesha

Need to change forecast data thru planning book + doubt while creating POS

hi friends,
my application creates forecast data for following.
product , location start date , end date.
i need to put this data into APO(DP).
i know i can do it using BAPI CHANGEKEYFIGUREVALUE2 of Planning Book APs
my doubt is while create a Plng Object store, what fileds do i take as charachteristics which match these, please reply if have some clue

Hi Rohit,
I believe i misunderstood your first post. I had given the BAPI parameters that you need to fill up for the given business requirements you have mentioned. I realized you were asking about the POS.
Answer to Q1: You can not place time characteristics in the POS. You will define the "time characteristics" in your Planning Area by specifying a relevant storage bucket profile.
Answer to Q2: You dont need to add time characteristics in the POS.
Answer to Q3: 9AVERSION is not included in the POS. However, when you use BAPIs BAPI_PBSRVAPS_GETDETAIL and BAPI_PBSRVAPS_CHANGEKEYFIGVAL to read/write data from/to the planning area you need to supply a selection for the planning version (9AVERSION).
Hope this helps.

Excel upload data to planning book not working

Similar Messages

Maybe you are looking for