Exception CX_RS_ERROR occurred when trying to run the DTP from Cube

Hi everyone,
I've run the DTP &  loaded the cube using normal transformation routines , it works fine in the Dev Sys but not in quality & production. I've access only to the Dev sys. In Qual & Prod when trying to run the DTP from Cube to open HUB
we're getting the following error
Exception CX_RS_ERROR occurred (program: CL_RSTRAN_TRFN================CP, include: CL_RSTRAN_TRFN================CM024*
My system support package level is SAPKW70106.
I've found note 920338 but is for SAPKW70107.

Hi,
The issue seems to be with the one of the routines in the transformation and similar kind of the issues were solved by retransporting the DTP & the related transformation.
Kindly reactivate the DTP and transformation in the source and execute a new request to transport the DTP, transformation and related routines to Quality & Production again.
Hope this helps.
Rgds,
Colum

Similar Messages

  • An error occurred when trying to access the service

    I'm asking myself why I purchased a one year subscription to Adobe Reader to convert PDF files to Doc files, when it NEVER WORKS and no one seems to be able to help me!!! I am on a Mac Book Pro with Yosemite (don't upgrade it slows your Mac badly) and whenever I try to convert a pdf to a doc I get 'an error occurred when trying to access the service', can anybody help me please?

    Hi Cedric,
    The customer service number is 800833687
    The direct link for chat support is: http://adobe.ly/19llvMN
    You need to click on 'Still need help' to initiate the chat session.
    Are you getting this error: "an error occurred when trying to access the service" while trying to access the service via Reader.
    Try using the link: https://cloud.acrobat.com/exportpdf sign in with your Adobe ID and try to convert a pdf to doc and check if that works for you.
    Reards,
    Rave

  • When I click Convert to Word docx, I receive the error message -- "An error occured when trying to access the service." This has been happening for about a week.

    Export PDF will not convert a pdf to MS Word. This failure has been going on for about a week. The error message is "An error occurred when trying to access the service." What can I do to get this working again?

    Hi,
    It seems it was working fine earlier.
    Is this happening with all files?
    You can try using different browser.
    Regards,
    Florence

  • I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

    After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery.  Any suggestions?

    Did you format the new HDD?  What is the status of the old HDD?
    Do you have an early or late 2011 MBP?
    Ciao.

  • 'An unknown error occurred when trying to play the...

    Hello,
    I have had a BT Vision package for a few months but we recently moved house and wanted to transfer our services. Since moving in, we have got the telephone, internet and TV channels working however we are struggling with the additional TV services (i.e. catch up, recording, on demand).
    Everytime we try to play something on catch up or via on demand, or try to play a recorded programme, it attempts to load but then the following error message appears at the bottom of the screen in a red box - 'An unknown error occurred when trying to play the video OutputProtectionEnableFailed'
    I have phoned BT's technical department on several occasions who have not been able to resolve the issue. I have tried Googling this error message and searching BT's website however I cannot find any comments about this error. BT have offered to send a technician out however will automatically charge £99 if this is an error with the cable rather than the BT box. This is a lot of money and I am not able to risk this potential charge when I'm not sure what the problem might be.
    If anyone know's what might be causing this , or has had the same error message themselves, I would be very grateful to know.
    Many thanks,
    SHyde

    Sounds as though you may have an account not properly set up. Drop the Mods a note and they can check what's going on with your account
    Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Helpful Post?
    If a post has been helpful, say thanks by clicking the ratings star.

  • I am getting this message when trying to upload an album to Apple from iPhoto - An error occurred when trying to contact the Apple on-line Store. Please try again later!!!

    I am getting this message when trying to upload an album to Apple from iPhoto - An error occurred when trying to contact the Apple on-line Store. Please try again later!!!

    Do you mean trying to purchase an iPhoto book?  Try rebooting and ordering again.  If that fails Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try ordering from there.
    OT

  • An Active Directory error 0x51 occurred when trying to check the suitability of server

    We have several exchange administrators and two exchange 2010 servers and one exchange 2007 server. I am getting the following error message
    when opening up Exchange Management Console on one of the exchange 2010 server. 
    "An Active Directory error 0x51 occurred when trying to check the suitability of server 'dc101.domain.local'. Error: 'Active directory
    response: The LDAP server is unavailable.' 
    dc101 does not exist anymore. I tried changing the Configuration Domain Controller by manually specify a domain controller but get the exact
    same error message and also gets an empty list when selecting the domain. Other administrators who logs into to the same server do not get this error message. 
    If I open the exchange management console on another exchange server, it works without problem. Is there a setting somewhere I need to change
    to point it to the correct domain controller using power shell?

    I fixed it for myself.
    Organization Configuration->Modify Configuration Domain Controller->select Use a default domain controller
     

  • Error when trying to run the rcu.bat file as part of OBIEE 11g installation

    when trying to run the rcu.bat file as part of OBIEE 11g installation on windows 7 64 bit I am getting the following error
    "windows cannot find C:\Users\manoj\Desktop\Oracle.Make sure you typed the name correctly, and then try again".
    Please help me how to overcome this error, I am not able to understand why it is looking for C:\Users\manoj\Desktop\Oracle.
    Thanks
    Manoj

    after setting the ORACLE_HOME and Path environment variables also....I am still getting the same error...so is it like RCU can be run only on windows 7 32-bit machines and it does not work on 64-bit machines? and also it seems like the previous versions of OBIEE 10.1.3.X does not support windows 7 64-bit machines...
    please help me finding a solution to this error....
    and what are all the versions of OBIEE can be installed on windows 7 64-bit machines?
    can't we install OBIEE 11g on windows 7 64-bit machines without including RCU?
    thanks
    Manoj
    Edited by: mkumar on Jun 2, 2011 3:47 AM

  • I am unable to covert a pdf to word. I get;"A error occured when trying to access the service

    I am unable to convert a pdf to a word doc.   I get, "An error occured when trying to access the service"

    This is the Reader forum, and your question seems to be related with ExportPDF. If it does, you should ask here:
    http://forums.adobe.com/community/exportpdf

  • HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

    I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

    You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
    Is this the only site you have problems with ? and does Safari work ok ?
    Often this problem requires the page to be reloaded
    * try pressing the shift key as you reload the page
    Another problem is sometimes the cookies for that site need clearing
    * see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
    * see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

  • I purchased Illustrator for one month but when trying to run the application, it asks me to "renew the subscription". I tryed to reload illustrator two times and reloaded CreativeCloud but still it doesn't work. What else can I try? I need AI immediately

    I purchased Illustrator for one month but when trying to run the application, it asks me to "renew the subscription". I tryed to reload illustrator two times and reloaded CreativeCloud but still it doesn't work. What else can I try? I need AI immediately for work

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Error when trying to run web report from BEx analyzer

    Hi Gurus,
    I am getting this error "STOP: System error in program SAPLRRS2 and form SELOPT_ASSIGN-01", when I am trying to run the report from the 4th button "Display report on Web" on BEx Analyzer. Can anybody tell me what this and how we can resolve it.
    Thanks and I will assign points.

    I coudn't properly understand solution provided herein:
    "Solution
    Note that you must generate the query again after you have implemented the correction (Transaction RSRT1 > Generate report).
    SAP NetWeaver 2004s BI
               Import Support Package 07 for SAP NetWeaver 2004s BI (BI Patch 07 or SAPKW70007) into your BI system. The Support Package is available when Note 0872279 "SAPBINews BI 7.0 Support Package 07", which describes this Support Package in more detail, is released for customers.
    In urgent cases, you can use the correction instructions.
    To provide advance information, the note mentioned above may be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version"."

  • Why do i get a daq hardware configuration required window when trying to run the daq solution wizard?

    i have recently installed the ni 4552 for pci dynamic signal analyser, and am attempting to configure my system and teach myself labview. when attempting to run the daq solution wizard i am presented with the daq hardware configuration required window.
    Attachments:
    DAQ_Hardware_Configuration_Required.ppt ‏38 KB

    hi brian, thanks for your help. i have recently received version 6.1, and done a complete re-install. i have also downloaded the latest ni daq (6.9.2) and ni dsa (6.11) versions and installed them, but still i get the same error message when trying to open the solutions wizard (please see attached powerpoint presentation).
    upon selecting the "go to ni daq config utility" option MAX opens. everything appears to be in order (device passes test, test panels run ok and virtual channels are configured correctly). i am unable to go any further.
    i would appreciate any guidance that you are able to give me in this matter. many thanks in advance of your help.
    best regards,
    ben halkon

  • Error on page load when trying to run the jsp appl. through JDeveloper

    I created an JSP application using Oracle JDeveloper 9.0.5.2 and Business Intelligence beans 9.0.5. and i am using Embeded oc4j Server for running the application from the JDeveloper Environment.
    All the presentations are existed in the Local Catalog of the application...
    Configuration file of the Application is :
    (Project1OLAPConfig4.xml):
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <!--This file is generated by the BI Designer object and specifies configuration
    settings for your application. These configuration settings do not affect
    the BI Designer object. You can specify the name of this file in the constructor
    of the BISession object for the application.
    If you want to customize this file, then choose Settings from the
    right-mouse menu of the associated BI Designer object. Or you can right click on the
    configuration file and choose Settings. You can choose whether to keep the
    configurattion settings the same for both design and runtime, which is the
    default, or to use different settings for design and runtime.
    Refer to the Help system for more information on the configuration file.
    Current Settings:
    In Sync with Designer
    -->
    <BIConfig>
    <BISession DeploymentOption="LOCAL">
    <BIUser Username="Local User"/>
    <Debug Mode="ERROR"/>
    </BISession>
    <PersistenceConnection PCID="pc1" PersistenceType="FILE" RootFolder="bidefs/Project1BIDesigner4/" BootConnection="true"/>
    <OLAPConnection OCID="oc1" ServerType="ROLAP" OLAPConnectionName="OLAPConnection1" HostName="twdpc232" SID="encore" PortNumber="1521" JdbcDriverType="thin">
    <DADFile Filename="/Project1OLAPConfig4OLAP.dad" Obfuscated="false"/>
    </OLAPConnection>
    <MetadataManager>
    <PersistenceConnection PCREFID="pc1"/>
    <OLAPConnection OCREFID="oc1"/>
    </MetadataManager>
    </BIConfig>
    Project1OLAPConfig4OLAP.dad :
    Username:CS_OLAP
    Password:CS_OLAP
    JSP page is : (biuntitled1.jsp)
    <%@ taglib uri="http://xmlns.oracle.com/bibeans/jsp" prefix="orabi" %>
    <%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %>
    <%@ page errorPage="cabo/bi/jsp/error.jsp" %>
    <%@ page contentType="text/html;charset=windows-1252"%>
    <!-- Start synchronization of the BI tags -->
    <% synchronized(session){ %>
    <orabi:BIThinSession id="bisession1" configuration="/Project1OLAPConfig4.xml" >
    <!-- Business Intelligence definition tags here -->
    <orabi:Presentation location="Presentation1" id="biuntitled1_pres1"/>
    </orabi:BIThinSession>
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
    <title>
    BI Beans JSP Page
    </title>
    </head>
    <orabi:BIBody>
    <form name="BIForm" method="POST" action="biuntitled1.jsp" >
    <orabi:InitBITags parentForm="BIForm"/>
    <!-- Insert your Business Intelligence tags here -->
    <orabi:Render targetId="biuntitled1_pres1" parentForm="BIForm"/>
    <p/>
    <p/>
    <!-- The InsertHiddenFields tag adds state fields to the parent form tag -->
    <orabi:InsertHiddenFields parentForm="BIForm" biThinSessionId="bisession1" />
    </form>
    </orabi:BIBody>
    </html>
    <% } %>
    <!-- End synchronization of the BI tags -->
    The Errors coming when loading the page are:
    Line : 25
    Char : 76
    Error : ObjectExpected
    Code : 0
    URL : http://172.29.52.77:8989/Workspace1-Project1-context-root/biuntitled1.jsp
    The same error is coming in the (line, char) combination are : (25,1);(30,1);(21,1);
    Output of bicheckconfig :
    BI Beans Diagnostics(v1.0.2.0) 8/23/04
    ===============================================================================
    JDEV_ORACLE_HOME .......................... = c:\JDeveloper
    JAVA_HOME ................................. = C:\j2sdk1.4.2_03
    JDeveloper version ........................ = 9.0.5.2.1618
    BI Beans release description .............. = BI Beans 10.1.2 Production Release
    BI Beans component number ................. = 10.1.2.5.0
    BI Beans internal version ................. = 3.2.0.37.4
    Connect to database ....................... = Successful
    JDBC driver version ....................... = 9.2.0.3.0
    JDBC JAR file location .................... = C:\JDeveloper\jdbc\lib
    Database version .......................... = 9.2.0.5.0
    OLAP Catalog version ...................... = 9.2.0.5.0
    OLAP AW Engine version .................... = 9.2.0.5.0
    OLAP API Server version ................... = 9.2.0.5.0
    BI Beans Catalog version .................. = N/A; not installed in CS_OLAP
    OLAP API JAR file version ................. = "10.1.0.3.0"
    OLAP API JAR file location ................ = c:\JDeveloper\jdev\lib\ext
    Load OLAP API metadata .................... = Successful
    Number of metadata folders ................ = 2
    Number of metadata measures ............... = 24
    Number of metadata dimensions ............. = 5
    Metadata output location .................. = C:\JDeveloper\bibeans\bi_checkconfig\bi_metadata.txt
    To interpret this output, see the "Displaying Information about your Oracle9i Business Intelligence Beans Client Configuration" technical note, whose file name is bi_checkconfig_tn.html
    These diagnostics are captured in: C:\JDeveloper\bibeans\bi_checkconfig\bi_checkconfig.xml
    Can any body help me....
    Thanks
    Bhanu.

    Copy the jdev_home/jlib/redist/uix2_install.zip file to
    jdev_home/jdev/redist folder . It will overwrite an existing uix2_install.zip file.
    Close and open the Jdeveloper IDE. It will prompt you for upgradation of projects. Press OK button in response.
    Now you should be able to run the JSP pages.

  • Error 201 when trying to run the demos !! HELP !!

    Hello, we are just trying to run the demos provided in the ZIP file that comes with the XDK version for Solaris 9i and we are having problems apparently with the encoding thing.
    I dont really have a clue how to make it run or provide the right encoding parameter. I have attempted to use every single parameter, UTF-8, ISO, ASCII, etc
    anyone had this problem at the very beginning?? or know how to solve it?? we r just beginner trying a start jump in XML and all this parser matter.
    thanks a lot. Verde.

    Please refer to:
    http://technet.oracle.com:89/ubb/Forum11/HTML/004973.html

Maybe you are looking for